REPAIR TO EPOXY KOTA GRANITE FLOORING ROOF TREATMENT SS RAILING POP FALSE CEILING WALL PANELING ALU UPVC DOOR AND WINDOW AND CERTAIN MISC WORK AT VRDE AHMEDNAGAR

Demolition of cement concrete (unreinforced) as in floor and paving n.exc. 15 cm thickness (below or above ground level) unreinforced complete all as specified and directed.

M&L for PCC type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) in floor screed 25mm thick complete all as specified and directed.

M & L for screed bed or bedding layer of cement mortor 1:6, 15 mm thick for laying of floor finishes complete all as specified and directed.

M & L for dark shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L for dark shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, as in vertical surfaces such as dado/skirting/wall over 10 mm thick rendering in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectangular) area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm matt finished as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L glazed coloured ceramic tiles in vertical surfaces of size 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortor as in floors, aprons etc complete all as specified and directed.

M & L 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over 10 mm thick cement mortor 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L granite (of any type) tile 20 mm thick in floors etc machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L half rounding to edges of stone slab one edge such as steps, cooking platforms etc complete all as specified and directed.

M & L preparing of old painted surfaces of walls surfaces over 10 cm width or girth and applying two coats of plastic emulsion paint on walls surfaces complete all as specified and directed.

M & L preparation of old plastered or unplastered surfaces of wall/ceiling by brooming down by steel wire brush and applying two coats of oil bound distemper complete all as specified and directed.

M & L for complete removal of exiting treatment and applying two coats of weather proof exterior emulsion paint white and tinted over a coat of primer including necessary scaffolding complete all as specified and directed.

M & L for preparing of old painted surfaces of walls over 10 cm width or girth and applying one coat of weather proof exterior emulsion paint white and tinted including necessary scaffolding complete all as specified and directed.

M&L for preparation of new or previously untreated wooden/ steel surfaces any description over 10cm width and girth not other wise described and applying two coats of synthetic enamel paint over a coat of Red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors), and similar suspended work complete all as specified and directed.

M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding/mass concrete of roof and to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick cement plaster in CM 1:3 with a mixture of water proofing liquid @ 3% by weight of cement on dried concrete surfaces finished fair and even without using extra cement complete all as specified and directed. Note : Water proofing liquid shall be measured and paid seperately.

Supply only water proofing liquid complete all as specified and directed.

M & L for Roof Coving & Water Proofing Treatment of all concrete defects as under and as per manufacterer's instructions :- (a) Opening the joints/crack such as cold joint, construction joints, cracks, corner joints and areas around honeycomb in the RCC of roof slab and column/footing/retaining wall by forming V/U shape groove with approx 25 mm x 25 mm size thereafter providing and applying Smart Care Repair polymer thereafter sealing the groove with 'SmartCare Repair Mortar' complete. (b) Injection grouting wherever required, grouting the joints through PVC injection nozzles fixed @ 1 M c/c or less, using cement slurry grout with SmartCare Injection grout added @ 250 gms per bag of cement to full saturation etc complete. (c) Primer - Providing and applying two componant water base epoxy primer AP SC PU Primer on bare slab @ 50% water dilution complete. (d) The entire area shall be taken up for thorough surface preparation with compressed air blow and mechanical removal of debris, laitance, etc. It shall be water proofed with a mechanical spray application at an average thickness of 1.5 mm supplying and applying high build elastomeric water proofing coating Smart Care Hyperton - Hybrid Polyurea is a solvent free two component high performance polyurea hybrid based waterproofing membrane with an elongation of >700% as per ISO 527, tensile strength >13Mpa as per ISO 527 and Shore a hardness of 85 as per ISO 868. The coating shall confirm to European Standard for fire protection, Stringent German FLL Standard for root resistance, BBA & ETAG 005 Certification. The system consists of two components i.e Polyol and Isocynate prepolymer and is designed for use through 1:1 volumetric spray equipment @ 1.5 Kg/Sqm. Note :- Gurantee bond and security deposit to be given as specified.

S & F loosely lay 150 GSM Geotextile (non-woven polyester) with a min of 100 mm wide overlap after which drain boards and soling can be allowed

M&L for Floor treatment in following method:- Surface preparation:- Providing and cleaning all floor surface to make it free from dirt, dust, loose particles, wax, polish, efflorescence, laitance, curing compound and other contaminants. Mechanical surface profiling to be provided grinding. Priming:- Providing and applying Apcoflor HFP 120/Apcoflor HFP 130, solvent free epoxy primer 150-200 gms/SqM in two coats using a brush or short / medium pile roller at a time gap of 8 hrs by ensuring a uniform coating is achieved and compensated the differences in surface porosity, allowing second coat to dry for 24 Hrs, as per manufacturer's specification. All cracks and construction joints should be either filled with epoxy putty or mortar. Epoxy screed:- Providing and installing, Apcoflor LSC3 XL highperformance, epoxy resin flooring screed by mixing all 3 components using heavy duty slow speed drilling machine fixed with mixing paddle, pouring of mixed material on the primed surface and spreading it using suitable trowel at 4.0 mm thickness at consumptionof 7.4 - 7.6 Kg/SqM. Gently rolling the surface of Apcoflor LSC3 XLusing bubble roller for uniform spreading followed by spike roller to remove the entrapped air, as per manufacturer's specification. Epoxy Top Coat :Providing and installing, Apcoflor SL1TC high performance, Electrostatic dissipative epoxy resin flooring system having excellent compressive strength, flexibility and tensile strength by mixing all components including pigment, using heavy duty slow speed drilling machine fixed with mixing paddle, pouring of mixed material on the primed surface and spreading it using suitable trowel at 1.0 mm thickness at consumption of 3 Kg/SqM. Gently rolling the surface of Apcoflor SL1TC using bubble roller for uniform spreading followed by spike roller to remove the entrapped air, as per manufacturer's instructions.

Taking up or down steel tubing 15 mm dia and connections, for removal complete all as specified and directed.

Taking up or down steel tubing 20 mm dia and connections, for removal complete all as specified and directed.

S & F 15 mm dia tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S & F 20 mm dia tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed

Dismantling of water tanks of capacity exc 250 ltrs and not exc 500 ltrs and removing complete all as specified and directed.

Dismantling of water tanks of capacity exc 500 ltrs and not exc 1000 ltrs and removing complete all as specified and directed.

S & F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Disconnecting existing 500 ltr water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required re-connecting and refixing in position complete all as specified and directed.

Disconnecting existing 1000 ltr water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required re-connecting and refixing in position complete all as specified and directed.

S & F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (20 mm - 210 gms) complete all as specified and directed.

S & F in repairs Gun-metal globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm dia chromium plated fancy type bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia fancy type chromium plated stop valves/ angle valve/push valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off theshutters from the frame) not exceeding 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off theshutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm in each complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, complete all as per direction of Engineer-in-charge over and including Door handle, lock and stopper etc complete all as specified and directed.

S & F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F door closer hydraulically regulated design No.3, universal type, aluminium die cast body, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed.

S & F powder coated anodised aluminium frames for doors, windows, ventilators with one or more rebates, including jointing cleats for fixing etc complete all as specified and directed

S & F powder coated anodised aluminium door/window shutters, aluminium section weighing 0.55 Kg/mtr including necessary jointing cleats, glazing clips, rubber neoprene packing, handles - 02 Nos in each door, hinges, anodised aluminium snab beadings, screws etc complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and 300 mm length of bolt and fixed complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S & F butt hinges of stainless steel of size 100 mm medium weight & fixed complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F sheet glass ordinary quality 4.00 mm thick, any size, tinted of approved colour fixed with and including rubber beading complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S & F 16mm thick and 595 X 595 mm Square hole Acoustic tiles including microlock grid of S.S 304 sections ceiling with, framing, wall angle complete all as specified and directed.

M&L for 10mm thick plaster of paris false ceiling (Gypsum anhydrous) to flat/ curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh over and including Fillets, metal frame work and G.I. wire mesh complete all as specified and directed.

S & F non-structural steel framed work such as grills and other section with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other coverings fixing complete quality confirming with Fe-290 (Gde-E-165) complete all as specified and directed.

S & F in repairs Collapsible steel gates, top hung, consisting of channel pickets, provided flat bars top and bottom runners, brass handles etc., as specified errected in position and securing runners with hold fasts and brackets complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/window Ceosetory windows and other frames/chowkats of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder, rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, moulded of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs/SS dash fasteners shall be paid for seperately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e, depth and width of profile shall be acceptable. Variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutters of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. Note : Rate quoted includes for stainless steel butt hinges, necessary SS wire mesh and all other fittings and fixtures.

S&F in repairs 25mm bore Stainless steel curtain rods 1.2mm to 1.5mm of grade SS202 chrome finish including pair of fancy type brackets, intermediate supports in case of length of rod more than 1.5m with necessary screws and plugs complete all as specified and directed."

S & F in repairs stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repair Marine plywood 18mm thick with decorative laminate 0.90 mm thick on both faces colour & pattern as approved, fixed with approved adhesive in cup board incl fittings such as lock, handles, soft close hinges etc complete all as specified and directed.

S& F in repair Marine plywood 18mm thick with decorative laminate 0.90 mm thick on One face colour & pattern as approved, fixed with approved adhesive in cup board complete all as specified and directed.

S&F in repairs 3 mm thick PVC tiles/sheets laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive as in floors complete all as specified and directed.

Please Enable Macros to View BoQ information