CONSTRUCTION OF TRAINING HALL CUM FARMERS HOSTEL AT RESUBELPARA DHO, NORTH GARO HILLS

Amount

CIVIL WORKS BUILDING

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trench etc

Providing soling with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade…..

Plain cement concrete works in foundation bed for footing steps, walls, brick works,etc. below plinth level as directed and specified including dewatering if necessary…

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: a)Cement mortar 1:6 (1 cement: 6 coarse sand)

Supplying, fitting & fixing in position reinforcement bars including straightening, cleaning, cutting & bending as per details (super ductile SD TMT reinforcement bars).

Centering and shuttering… Footing

Centering and shuttering… Tie Beam

Centering and shuttering… Floor Beam

Centering and shuttering… Column

Centering and shuttering… Slabs,roofs,landings,balconies and access olatform, shelves(using steel)

Centering and shuttering… Stairs/spiral staircase,(excluding landings)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcements-all work upto plinth level.

Reinforced cement concrete work in walls(any thickness), including attached pilasters, butresses, fillets,columns,pillars, posts, and struts,etc. above plinth level upto first floor…

Reinforced cement concrete work in walls(any thickness), including attached pilasters, butresses, fillets,columns,pillars, posts, and struts,etc. above plinth level upto first floor…

Earthwork in filling(excluding work) in trenches, plinth, sides of foundation,etc. in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and…

Plain cement concrete works in foundation bed for footing steps, walls, brick works,etc. below plinth level as directed and specified including dewatering if necessary…

Half brick masonry with common burnt clay(non modular) 1st class bricks in superstructure…

Providing woodworks in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs…

Providing and fixing panelling or panelling and glazing In panelled or panelled or glazed shutters for doors,windows and clerestory windows….

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733…

Providing and fixing glazing in aluminimium door, window, ventilator shutters and partitions,etc. with EPDM rubber/neoprene gasket etc.complete as per the architectural drawings…

Providing and fixing MS grills of required pattern in frames of windows,etc. with MS Flats, square or round bars,etc….

Cement plaster(in coarse sand ) 12 mm cement plaster of mix a) 1:4

Applying one coat of water thinnable cement primer of approved brand etc..

Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surfacevto prepare the surface even and smooth complete…

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade…

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, including scaffolding: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by thr manufacturer) with water absorption less than 0.08% and conforming to IS: 15622…

Marble stone flooring with 18 mm thick marble stone as per sample of marble approved Engineer-in-charge over 20 mm…

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Mat board (595x595 mm) conforming to ls:13958-1994 including providing and fixing Of frame work made of Gl angle 25x25xO.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made Gl slotted Tee having powder coating on bottom side (30x25xO.3 mm thick for main member & 25x25xO.3 mm for cross member) connected to ceiling with 2.64 mm Gl wire and anchor fastener at every junction and also including cost Of making openings for light fittings, grills, diffusers, cut outs made with frame Of perimeter channels suitably fixed all complete as per direction of Engineer-in

Cement concrete floor topping 1:1:2 ( 1 cement: 1 coarse sand: 2 stone aggregate) finished with a floating coat of neat cement,including cement slurry, complete.

Providing and placing on terrace( at all floor levels) polyethylene water storage tank…

BOUNDARY WALL

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils..

Plan Cement Works:- Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plint level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid seperately).

Supplying fitting and fixing in position reinforcement bars up to 1st floor level conforming to relevent I.S. Code for R.C.C. work R.B. walling including straighten,cleaning, cutting and bending----- complete

Supplying fitting and fixing in position reinforcement bars up to 1st floor level conforming to relevent I.S. Code for R.C.C. work R.B. walling including straighten,cleaning, cutting and bending----- complete

Centering and Shuttering including Strutting, Propping, etc and removal of form for all heights complete and as directed by Engineer in-charge

Centering and Shuttering including Strutting, Propping, etc and removal of form for all heights complete and as directed by Engineer in-charge

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with:

Brick work in cement mortar with first class brick in superstructure above plinth level up to first floor level in all shapes and size:

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level:

Reinforced cement concrete work in walls (any thickness), includingattached plasters,buttress, fillets, columns, pillars, post and struts etc above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement:

Providing and fixing M.S. grills of required pattern in framesof windows, etc. with M.S. flats, square or round bars, etc. including proming coat with approved steel primer all complete

Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade, including scraffolding:

Applying one coat of water thinable cement primer of approved brand and manufacture on surfaces:

12mm cement plaster finished with a floating coat of neat cement of mix:

APPROACH ROAD

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.. b) In ordinary rock (soft rock/ medium rock/ hard shale)

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. B) Stone soling (i) 100 mm

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge.

Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).

Cement concrete pavement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete.

INTERNAL WATER SUPPLY & SANITARY FITTINGS

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall (iii) 25 mm diameter nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to ls:8931 : a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) Of standard design and Of approved make conforming to ls:8931. a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to ls:8931 a) 15 mm nominal bore

Providing and fixing C.P, Brass extension nipple (size l5x50 mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to ls:7231, with all fi"ngs and fixtures complete. including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C, pan of size 580x440 mm with integral type foci rests

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP Brass single hole basin mixer Of approved quality and make, including painting Of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception Of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per ls:13983 with C.I. brackets and stainless steel plug 40 mm, including painting Of fittings and brackets, cutting and making gcod the walls wherever required : a) Kitchen sink with drain board i) 510xl040 mm bowl depth 250 mm

Providing and fixing 8 mm dia. C.P/ S.S Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer-in-charge.

Providing and fixing 8 mm PVC low level flushing cistern with manually controlled device …etc a) 10 ltr capacity white

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. A) 10 litre (full flush) capacity-white

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder: C.P. brass

Providing and fixing soil, waste and vent pipes: a 100 mm diameter (ii) Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: b) 150x100 mm size P type

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge.

Supplying fitting 7 fixing of water Heater (Geyser) of 1.5Kw/3Kw with pressure release value including all necessary acessories sa required © 25 Litres capacity

Wet Riser & Sprinkler System 1. Supplying , installation , testing commisisoning of Electric Driven Main Fire Pump suitable for automatic operation and consisting of the following complete…..(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc, as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. 1.3 2850 lmp at 56 m Head

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4 coarse sand): 100 mm dia.

EXTERNAL WATER SUPPLY & SANITARY FITTINGS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (iii) 25 mm nominal outer diameter pipes

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4 coarse sand): 100 mm dia.

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (ix) 100 mm nominal inner diameter Pipes

Supplying fitting & fixing complete domestic mini single phase 1(PH) Monoblock water pump set e) 1.5 HP (1.1 KW)

CONSTRUCTION OF SEPTIC TANK

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.. b) In ordinary rock (soft rock/ medium rock/ hard shale)

Providing brick soling in foundation and under floorbest quality picked up jhama brick

Providing and laying cement concrete in propn 1:3:6 including necessary curing

Brick work in cement mortar with first class brick including racking out joints and curing complete in sub-structure

Providing fitting & fixing in position reinforcement bar upto first floor level for RCC works including strenghtening ,cleaning,cutting,and bending to proper shapes and length a) From primary source like TATA,SAIL.ESSAR/JINDAL/SHYAM

Providing form work of ordinary timber planking of thickness not less then 25 mm thick (a) Foundation, footting, abse of columns pile cap,raft and mass concrete.

Providing and laying cement in RCC works with corase sand and 20 mm down graded including dewatering if necessary and curing complete. 2.5.1 In foundation and sub-structure (a) M 15

CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix: a) 1:4 (1 cement: 4 coarse sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Change. (ix) 100 mm nominal inner diameter pipes

CIVIL WORK FOR CONSTRUCTION OF GUARD SHED

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.. b) In ordinary rock (soft rock/ medium rock/ hard shale)

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. B) Stone soling (i) 100 mm

Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with:

SHUTTERING/ FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Foundations, footings, bases of columns, etc. for mass concrete (using steel). Footing

Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).

Columns, Pillars, Piers, Abutments, Posts and Struts (using steel).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: M20 or 1 : 1.5 : 3 (1 cement: llA coarse sand: 3 graded stoneaggregate 20 mm nominal size)

Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level a) Cement mortar 1:3 (1 cement: 3 coarse sand)

CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix: a) 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: a 1:4 (1 cement: 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length. B) Sal wood

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) a ) With Teak wood/ Sissu wood.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

c) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Applying one coat of water thinnable cement primer of approved brand and manufacture on surfaces: Water thinnable cement primer

Finishing walls with textured exterior paint of required shade, including scaffolding: a New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Extra for providing red/ coloured oxide topping for flooring of 5 mm thickness using 3.5 kg red oxide powder per 50 kg of cement in mortar 1:3 finished with a floating coat of cement & red/ coloured oxide mix of one proportion over corresponding

Providing corrugated G.S or galvanised iron sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. d 0.60 mm thick with zinc coating not less than 275 gm/sqm

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. c 0.60 mm thick with zinc coating not less than 275 gm/sqm

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required) a Mild steel and Medium Tensile steel bars

INTERNAL ELECTRIFICATION & FITTINGS Wiring in looping system with Copper PVC cable 250/440 volt grade of size 1.5sq mm of approved quality using PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point.

(a) Long point wiring upto 10mts(i) with copper conductor

(b) Medium Point upto 6mts(i) with copper conductor

Wiring as in Item No.1 complete to a light plug point when fixed elsewhere. (a) Long point wiring upto 10mts(i) with copper conductor

Wiring as in item No.1 complete to a light plug point when fixed on the same board.

Wiring to a power plug as in item No.1 above with 2 x 4mm² including supplying of 15Amp 5 in 1/SS Combine with continuous earth wire to a power point complete.

(a) Long point wiring upto 10mts(i) with copper conductor

Wiring as in item No.1 above to a Ceiling/ Exhaust Fan Point.

(b) Medium Point upto 6mts(i) with copper conductor

Wiring as item No.1 above to a calling Bell/Bell indicator point control by 5Amp Bell push. (a) Long point wiring upto 10mts(i) with copper conductor

Wiring as in item No.1 above from the Stair Case/ Two way Switch wiring. (a) Long point wiring upto 10mts(i) with copper conductor

Drawing of 3 phase main line 4 wire with DGSD approved VIR pr PVC cable 660 volt grade in casing capping with all accessories.

(a) With 2X2.5 sq mm copper conductor.

(d) With 4X16 sq mm Cu conductor (from panel board/ bus bar to MCB board)

Supplying and fixing wall/ floor mounted metal board of welded construction and fabrication with minimum (50x5)mm angle frame work with horizontal and vertical intermediate members of suitable angle/ flat iron covered with 1mm MS sheet for mounting of switch gear including painting as required. c) Iron frame board (1000x1000x200)mm

Supplying with fitting and fixing complete switch fuse unit (SFU) sheet steel re-wirable main switch with pre-fitted fuse wire 50 hz 240/415 V. b. 3 pole with neutral (TPN)

(e) 200 amp 415 V capacity (Master Main Switch for the whole circuit).

Supplying fitting & fixing complete 240/ 415 V Al. bus bar chamber. A. Economy sheet steel 50 Hz. 240/ 415V ii) TPN 4 ways

b) 63 amp 415V capacity

(d) 200 Amp 415 V Capacity.

Supplying and fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63A (A) Single pole 240/ 410 V

Supplying fitting and fixing of DX3 Isolators for AC application upto 125 A. c) Four pole 415V d) 100 amp

Supplying & fixing of Residual-Current Circuit Breaker with overcurrent protection RCBOs assembled for AC applications upto 63A E. Four pole 415V, AC type 100 mA e) 63 amp

Supplying fitting and fixing of distribution board SPN DB's for MCB, Isolator, RCCB and RCBO C. IP 43- #1K 09 with acrylic door d) 16 way + 16 module

Supplying fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories. a) bulb iv) 9 W

Supplying fitting and fixing of LED battern surface or wall mounted with all necessary accessories. b) With aluminium housing & integrated electronic driver. iii) 20W (1182 x 23 x 37)

Supplying fitting and fixing of LED panel lighting surface or wall mounted with all necessary accessories. e) (Surface) LED flat panel for surface mounting

Supplying fitting and fixing of Street light surface or wall mounted with all necessary accessories. b) LED street light made up of pressure die cast aluminium hosing with high power led as lighting source and lens embedded PC cover having protection and impact resistance with 10KV built-in surge protection device. vi) 60W suitable for pole dia Ø 43 mm (max)

Supplying,fixing,connecting,testing and commissioning of calling bell/ bell indicator type suitable for 230 volt as well as battery operated complete with all necessary ascessories. (a) Dingdong Bell

Supplying and fitting of ceiling fan AC operated type 220/250 volt complete with three nos. of blades down rods canopy hanging shackle and 30mm length of down rod supplied with the fan by the dealer but the extra lehgth will be charged @ Rs 25.00/ mtrs. (c) AC ceiling fan of '1400' mm sweeps.

Supplying fitting & fixing of hand dryer machine made of flame proof plastic body automatic operated with all necessary accessories. a) Automatic Hand Dryer 1.2KW

Supplying,fitting and fixing of exhaust fan double bearing self lubricating type Single phase,50 Hz,250 volt AC operated complete with supporting frame,fan blades,nuts and other petty accessories as required. a) Domestic Exhaust fans iv) Metal exhaust fan 225 mm

Providing laying connection testing & commissioning of the following testing & commissioning of the following sizes of 1100V PVC/XLPE armoured cable with aluminium conductor as per ISI code in bracket, trenches, MS cable rods and refilling the same in layers or by supporting them in walls and all other acessories as required. (b) With 3.5 core 35 sq mm.

Supplying fitting & fixing of water heater (geyser) of 1.5Kw/ 3Kw with pressure release value including all necessary accessories as required. b) 15 litres capacity

Supplying fitting & fixing complete domestic mini single phase 1 (PH) monoblock water pump set. e) 1.5 HP (1.1KW)

Supplying fitting & fixing of push button type direct on line starter of L&T. 1-2HP single phase

Supplying fitting & fixing of AC with heating and cooling facility including supply of all necessary accessories as required for installation of Air conditioner (AC) (b) 2 ton capacity

Supplying fitting and fixing of copper lightning arrester with 5 nos. finger at the top & copper base plate at the bottom complete. b) with 5ft high copper rod

Supplying,fitting,fixing earthing with copper earth plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal,salt etc. complete as required. a) copper earth plate electrode

Supplying fixing connection testing of 8SWG wire along the wall, columns etc with necessary clamping as required. a) with copper wire (for lighting arrester and earthing)

Supplying fitting & fixing of 3 phase Energy Meter, 550 Volt of 3 X 5-10, 3 x 10-20, 3 x 20-40 amp capacity (b) 3 phase Energy Meter of 3 x 50, 3 x 100 Amps capacity,

Supplying fitting & fixing of 440 volt grade four pole change over main switch (best quality) b) 100 amp capacity

Supplying & fitting of ABC DRY POWDER fire extinguisher including with all necessary accessories. b) Supplying installation fixing ABC DRY chemical powder fire extinguisher of 10kg trolley mounted confirmation to IS: 2171 and CO2 cartridge confirming to IS:4947 powder confirming to IS:4308.

RIAZ UDDING (BID ID -4539)

GREWINDA MARAK (BID ID -4545)

Shri. Jhonny A. Sangma (BID ID -4554)

JOYDEEP SEN (BID ID -4532)

BALSIN M SANGMA (BID ID -4551)

NILATH MARAK (BID ID -4561)

MINHAS SHEIKH (BID ID -4542)

Beekay Construction (BID ID -4558)