Construction of Anganwadi building 1 no in Package No.TN 30-07 in Ariyalur Block of Ariyalur District Under AGAMT II 2021-22

Amount

1. Construction of New Anganwadi Building at Walajanagaram in Walajanagaram Panchayat Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth

Supplying and filling of Carted earth gravel from approved quarry including cost and conveyance of all materials to site and all labour charges etc., complete

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed, watered and compacted complete complying with standard specification

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Brickwork in Cement Mortar 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete.

Supplying and erecting steel centering for sides and soffits etc complete complying with standard specifications for column, Grade beam and Lintel

Supplying and erecting steel centering for sides and soffits etc complete complying with standard specifications for Roof slab

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Weathering course Concrete using best quality broken Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing, laying and finishing, etc., complete

Finishing the top of roof with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc., complete

Plastering in Cement Mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Plastering in Cement Mortar 1:3 mix, 10mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick

Dadooing of walls with Glazed tiles of size 15cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 including cost and conveyance of all materials to site and all labour charges etc., complete

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc, complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc., complete

Painting the newly plastered wall surface with two coats of Exterior Emulsion outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification

Painting two coats over new iron works with ready mix paint of approved colour and trade including cost and conveyance of all materials and all other labour charges etc., complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Paving the Floor with Paver Block (60mm thick) with laid over interlocking blocks including cost and conveyance of all material to site and all labour charges, etc complete.

Cost and Supply of Steel Door of size 0.90x2.10m

Cost and Supply of Steel Ventilator of size 0.90x0.45m

Cost and Supply of RCC Joley of size 0.90x0.45m

Cost and Supply of Steel Door of size 0.75x1.20m

Cost and Supply of Steel Window of size 1.20x1.30m

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (SD No.21)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube (SD No.89)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point (SD No.40)

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60W bulb (SD No.84)

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD No.66)

Supply and run of 2 of 6 sq.m PVC insulated single core unsheathed copper conductor of 1100V grade insuuitable 25mm GI pipe suitable bend at both ends with necessary angle iron upright and end supports for main service pipe (SD No.71)

Supply and run of 2 of 6 sq.m PVC insulated single core unsheathed copper conductor of 650V grade insuuitable PVC Rigid pipe on wall or ceiling with continous eart wire connectionof14 SWG TC Wire with painting of Suitable colour -EARTH STAND

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.125)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp (SD No.107)

Supplying and fixing Cuddapah slab of 50mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including all labour charges etc., complete

Supplying & Fixing in position Europeon Water Closet with all fittings and 10 lit capacity flusing tank including all labour charges etc., complete

Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm including all labour charges etc., complete

Supply of PVC Storage tank 500 litre Capacity including cost and conveyance of all materials to worksite and all labour charges etc., complete

Cost and supply of 110mm dia PVC Pipe (6kg/cm2)

Cost and supply of 20mm dia PVC Pipe (6kg/cm2)

Cost and supply of 20mm dia PVC Elbow

Cost and supply of 20mm dia PVC Tee

Cost and supply of 20mm dia PVC Tap

Cost and supply of 20mm dia PVC Gatevalve

Provision for Arts painting work

Provision for Rainwater harwesting

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Shuruthi Engineering