Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 CrAccepted-AOC | ₹44.5 Cr Quoted ₹44.7 Cr | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹50.1 CrRejected-Finance | ₹50.1 Cr | L2 | Rejected-Finance Higher than L1 Bidder |
| 3 | L3₹52.5 CrRejected-Finance 34 KALIKA DAS ROAD NATUN BAZAR P O DIST COOCH BEHAR PIN 736101 W B | COOCH BEHAR | COOCH BEHAR | WEST BENGAL | 736101 | ₹52.5 Cr | L3 | Rejected-Finance Higher than L1 Bidder |
| 4 | L4₹56.1 CrRejected-Finance | ₹56.1 Cr | L4 | Rejected-Finance Higher than L1 Bidder |
| 5 | L5₹58.9 CrRejected-Finance L 87 STREET NO 7C MAHIPALPUR EXTENSION NEW DELHI 110037 | NEW DELHI | NEW DELHI | DELHI | 110037 | ₹58.9 Cr | L5 | Rejected-Finance Higher than L1 Bidder |
Tender Value
₹62.4 Cr
EMD Value
₹15 L
Closing Date
23 Dec 2020, 6:00 pmClosed
CE (AF) SHILLONG ZONE
HQ CE (AF) SHILLONG ZONE, ELEPHANT FALLS CAMP, PO-NONGLYER, SHILLONG-793009
WORK SERVICES FOR IMPROVEMENT OF BASE SECURITY AT AF STN HASIMARA
2020_MES_391162_1
88430/HAS/E8
Open Tender
Civil Works
728 days
GE (I) (P)(AF) Hasimara
Please refer Tender documents.
8 documents required · 8 mandatory
₹3,000
GE (I) (P) (AF) Hasimara
₹15 L
Yes
HQ CE (AF) SHILLONG ZONE
8 Feb 2021
29 Oct 2020
24 Dec 2020
29 Oct 2020
23 Dec 2020
18 Dec 2020
1 Nov 2020 - 26 Nov 2020
9 Nov 2020
Amount
SCHEDULE "A" PART-I (BUILDING WORKS) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART-II (EARTH WORK AND SITE CLEARENCE ) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY AND PLUMBING WORKS ) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-V (ROAD/PATH AND CULVERT) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-VI (SECURITY WALL AND GATE Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-VII (EXTERNAL ELECTRIC SUPPLY ) Details of prepriced Schedule is given in tender documents.
SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART-IX (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART-X (DISMANTLING & DEMOLITION ) Details of prepriced Schedule is given in tender documents
SCHEDULE "A" PART -XI (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.
INTERNAL ELECTRIFICATION. S&F Modular Blanking Plate suitable for Moduler Switch Board complete as required.
S&F Modular metal flush box 10 module complete as required.
S&F modular telephone jack (double, RJ-11) one module including modular MS flush box & metal frame cover plate incl. all accessories, connection, etc. complete as required.
S&F modular TV socket outlet , one module including modular MS flush box & metal frame cover plate incl. all accessories, connection, etc. complete as required.
S&F testing and commissioning of 40A, 10KA 4P MCB ,C Curve as required in existing vertical distribution board including drilling holes in the vertical distribution board, making connections etc as required as per SLD complete as required.
S&F testing and commissioning of MCB single pole 240V, 6-32 Amps as required in existing vertical distribution board including drilling holes in the vertical distribution board, making connections etc as required as per SLD complete as required.
Supply and fixing of 1x1000W HPSV, weatherproof, manual operated 360 degree rotatable as well as with 45 degree tilting arrangement, sealed with range of minimum 700 m, carbon aluminium alloy body, mirror back glass reflector with SS side reflector, toughened front clear glass scaled with neoprene gasket, fireproof ceramic lamp holder, control gear, locking arrangement, lamp holder, etc. along with under deck control arrangement. Search light shall be fitted on roof of the watch tower at a height of 1 meter and suitable length of operating handle shall be provided for easy operation from the watch tower cabin below the roof. Gunmetal bushes, SS hardware shall be used. Metal parts shall be powder coated. The search light shall be suitable for outdoor installation with IP:65 degree of protection and type tested by NABL approved Govt. Testing Laboratory as per relevant IS complete as required.
Supply and fixing of 20W surface mounted LED light fixture complete as requied. Make:- Philips cat no- 150w LED 20S- 6500 PSE OD GR/ GE Cat No-LBTBT817WWSEN or approved equivalent.
Supply and fixing of 40 W LED luminaire with bracket suitable for wall mounting complete as required. Make:- Philips Cat no -BRP409 LED CW 034 MR PC S1 PSU GR/ GE Cat No-Palm Mid 43W, Cool white version or approved equivalent.
Supply and fixing of 20 W surface mounted LED light fixture complete as required. Make:- Philips Cat. no. BN108C LED 20S PSU CDL WH / Crompton Cat No-LCPTSNC30‐CDL / Osram Cat No-SIMPLITZ BTN ACH 1200A 840 10X1.
Supply & fixing of 1x10W LED surface mounted mirror light fixture complete as required. Make:- Philips Cat. No. BN150W LED13S-6500 PSE OD GR / GE-LBTBT809WWSEN or equivalent as per list of make.
Supply, installation, testing and commissioning of 10W LED Step Light light fixture complete as required. Make:- Philips Cat No - LED,BWG150 LED50/WW PSU/ Crompton-LWOM10WW/FO.
Supply, installation, testing and commissioning of 1x10W LED Bulk Head Light light fixture complete as required. Make:- PHILIPS CAT NO. WT 202 10W/ Wipro-LW03-850-XXX-57-XX/ Osram -OLUX LED BULKHEAD BK10W 930 or equivalent as per list of make.
Supply, installation, testing and commissioning of 230 V single phase, 1200 mm sweep ceiling fans three star with double ball bearing complete , fan hooks, down rod and other fixing accessories as required.
Supply, installation, testing and commissioning of 300 mm sweep heavy duty exhaust fan complete with bird guard, louvers etc and other fixing accessories as required.
S&F testing and commissioning of 32A, DP MCB with cable connection and copper lugs complete all as specified and directed.
Supply and fixing of 38 W LED Batten type light fixture complete as required. Make:- PHILIPS CAT NO. BN208C LED20/WW L1200 FR/ CROMPTON-LCPTSNC30‐CDL / OSRAM-SIMPLITZ BTN ACH 1200A 840 10X1 or equivalent as per list of make.
Supply, installation, testing and commissioning of 450 mm sweep heavy duty exhaust fan complete with bird guard, louvers etc and other fixing accessories as required.
INTERNAL WATER SUPPLY. Supply and fixing Urinal Valve Auto Closing System with Built-in Control Cock all as per specified and as directed.
Supplied and fixing C.P. brass twin robe hooks all as per specified and as directed. Make:- JAQUAR Cat. No. 1161 or equivalent as per list of make.
Supply and placing in position crack proof, fade proof, noise free table top hot / cold water dispenser suitable for replaceable bottle of 20 litres capacity. The dispenser should be provided with hot and cold water faucet, LED indication for cooling and heating functions etc complete all as per specified and as directed.
Cast iron manhole covers and frames, medium duty, and type and size Setting in cement mortar 1:3 and flaunching with cement concrete 1:2:4 type B-1 complete all as per specified and as directed.
Supplying and fixing C.I. manhole covers (13 kg weight) in position of size 300x300mm. for valve chamber all as per specified and as directed.
ROAD Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification (150mm compacted thickness) including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve dry density min. 98% of Modified Maximum Dry Density (MMDD) as per IS 2720 Part VIII complete all as directed.
M & L 150mm thick granular Sub-base (compacted thickness in single layer) with Close Graded Material (Table:- 400-1 of MORTH Specifications) by Mix in Place Method - Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to to required gradient and camber to achieve dry density min. 98% of Modified Maximum Dry Density (MMDD) as per IS 2720 Part VIII, complete as per clause 401 of MORTH Specifications (Fifth Revision) complete all as specified & directed.
M&L Bringing approved earth from outside MD land for forming embankment including raising earth, spreading in layers n.exc. 30 cm thick, watering, ramming/rolling and finished to required gradient, size and shape etc not exceeding 1.50 metre above the initial level complete all as specified and as directed. Note:- (i) Payment shall be made for solid quantity arrived after consolidation. (ii) Before execution of this item earth shall be tested/checked for suitablity to use.
SECURITY WALL AND GATE M&L for providing reinforced cement concrete (M-30) in precast Columns, posts, fencing posts, straining or terminal posts, struts etc. for fencing, including all necessary reinforcement & Shuttering as shown in drawings, with or without chamfered angles and flat, splayed, rounded or mitered tops as directed and fixed.
Alla as per item No 37.00 here-in-before but for walls
S&F CONSEC-ZAL Super Razor punched barb tape (SRPBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with following specifications:- (i) Dia of coil (when unstretched) - 610mm (ii) No of circles-51 turns per coil (iii) Weight of each coil with hessian pack - 8.50 Kg( +0.5 ) (iv) Coverage per coil - 6 RM Note :- Running length of the wall shall be measured for payment purpose.)
M&L nonshrink, high strength, free flowing and self levelling, non metallic, chloride free cementitous grout between two precast RCC wall panel of 80 mm thick . The grout shall have expansion of 0.8% to 1.5% and density of 1800kg/m3 and shall attain 500kg/cm2 compressive strength at 28 days.water cement powder ratio shall not be more than 0.17 and shall have flowable index of 0.19 as shown in drawing all as specified.
M&L nonshrink, high strength, free flowing and self levelling, non metallic, chloride free cementitous grout in 80 x 80 x 200 mm pocket to fix angle frame . The grout shall have expansion of 0.8% to 1.5% and density of 1800kg/m3 and shall attain 500kg/cm2 compressive strength at 28 days.water cement powder ratio shall not be more than 0.17 and shall have flowable index of 0.19 as shown in drawing all as specified.
M&L for providing and fixing Hilti/fisher bolt 10 mm dia x 100 mm to fix the angle frame/Ms Plate over precast RCC wall panel as shown on drawing all as specified.
M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (camouflage pattern) — New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm) all as specified.
EXTERNAL ELECTRIC SUPPLY. Supply and erection of 8 m height Hot dip galvanised octagonal pole made of HT steel of grade S355 of BSEN 10025 with 130 mm bottom A/F & 70 mm top A/F made up of 3mm thick G.I. sheet along with base plate of size 200 x 200 x 16 mm thick with including suitable foundation as per manufacturer recommendation , 4Nos of M24X7500mm long 'J' type EN 8 grade foundation bolts along with template, including integral power distribution arrangement with suitable breaker and connector for loop in loop out arragement suitable for 4Cx 16Sqmm/4Cx25Sqmm cable and Galvanised bracket of length 0.75m for fixing of LED street light as directed
Supply and fixing of 90W LED light fixture made out of epoxy powder coated die cast aluminium housing, weatherproof gasket, control gear accessories complete all as specified. Each:- Philips Cat No- brp 322 led 100 cw he nr pc s3 xt, Osram Cat No- LUXVANCE 110W 1050mA 5700K 80º x 140, GE- Palm Max G1 110W, Cool white version or equivalent as per list of make.
Package Substations No. 1 & 2 Supply, installation, testing and commissioning of outdoor 11 kV package substation having outdoor type enclosure, modular construction of galvanised sheet steel minimum 2 mm thick with 4 mm base suitable for outdoor installation, consisting of HT VCB, cast resin/VPI dry type transformer, LT panel and capacitor panel with all interconnections, metering, protection, internal HT XLPE cable and LT copper bus duct suitable for short circuit current, internal earthing connections, type tested as per IEC codes including foundation etc. complete in all respects as required of following capacities, and as per single line diagram and specifications: Note:- This item inclusive of Providing & fixing chainlink fencing as per given drawings. All earthwork, steelwork, painting, steel gate, PCC, removal of surplus soil within MOD land,sand, gravel etc all complete as directed by GE. Package Substation No.-1 & 2 1 No. 11 KV 630A, 25 KA vacum circuit breaker enclosed in sheet steel tank with metering and protection of transformer, self powered microprocessor based numerical relays and dedicated CTs for protection of transformer. Metering and protection shall be as per single line diagram. Transformer 1 no. 100 KVA, 11 kV /0.433 kV Delta/Star, Dyn11, insulation Class-F, naturally cooled, dry type transformer with OFF load tap changer with - 5% to + 5% tapping in steps of 2.5% on HT side. LT Panel Incomer 2 no. 160A 415V 4P MCCB (35 kA) complete with necessary auto on/off mechanism , electrical and mechanical interlocking as required and as per drawing. 2 set ON/OFF/TRIP indicating lamps. 2 set LED phase indicating lamp with 2A SP MCB. 2 no. multi-function meter, 3 set 160/5A Class-1 CT for MFM & APFCR. 1 no. Type I Surge Protection Device
Serial Item No. 46.00 (Contd...) Bus Bars 200A, 415V, 35 kA, 50 Hz, 3-phase, 4-wire, Aluminium bus bars Outgoing 01 no. 63 A, 3P MCCB, 35KA with electronic release 09 no. 63 A, 4P MCCB, 35KA with electronic release 10 set LED phase indicating lamp with 2A SP MCB. 10 set 63/5A Class-1, CT , 10 set 0-63A Digital ammeter Capacitor Panel (30 KVAR) Incomer 1 no. 100A 415V TP MCCB, 35KA with electronic release 1 Set ON/OFF/TRIP indicating lamps (LED). 1 Set ON/OFF push buttons. 1 Set LED phase indicating lamps with 2A SP MCB. 2 set 100/5A Class-1 CT 1 No. 0-500 V Digital voltmeter 1 Set 0-100A Digital ammeter 1 No. APFC relay Bus Bars 150A, 415V, 35 kA, 50 Hz, 3-phase, 3-wire, Aluminium bus bars Outgoing 2 no. 32 A, 3P MCCB, 35KA with capacitor duty contactor, ON/OFF push buttons and LED indicating lamps. 1 no. 20 A, 3P MCCB, 35KA without capacitor duty contactor, ON/OFF push buttons and LED indicating lamps. 2 set 5 KVAR capacitor banks. 2 set 10 KVAR capacitor banks.
Feeder Pillar - 1 & 2 Supply installation testing and commissioning of feeder pillar cubicle type weather proof outdoor CPRI approved totally type tested both side openable IP:55 factory made having canopy dust and vermin proof fabricated from MS sheet 3.15 mm thick including powder coated and suitable for 415 volt 3 phase 50 c/s on PCC pedestal. Cost of cement concrete 1:4:6 (1 cement: 2 coarse sand : 4 stone aggregate) to be included in the rate offered for each item and Suitable size of panel mounting the following accessories with working space and wiring with cooper cable of suitable size complete as required and as per SLD & specification: ( Note: Installation /commissioning Height of feeder piller box should not be less that 0.5 meter above NGL) Incoming 63 A 4P MCCB 25 KA - 1 No. LED phase indicating lamp controlled by 2A SP MCB - 1 set. 0-63A Digital ammeter including CTs 63/5A Class 1, 15 VA - 1 set. Bus Bar Aluminium bus bar TPN 3 phase 4 wire insulated 100 A bus bar 25 KA grade, with proper colour coding phase wise. Outgoing 40A 4P MCB 10 KA, 415V - 4 No. Astronomical Timerswitch Astronomical Time switch 20 Amps 24 hour programming type with ML-3 Contactor 70A, 415 Volt, three phase, coil operating vontage 230 Volt, three point Auto manual switch 15 Amps for bypass system with 63A 4P MCCB adjustable( 40 % to 100 %) Microprecessor release , 35KA comple te incl necessary connection by using copper wire of size 16 Sqmm - 1 set
Feeder Pillar - 3 Supply installation testing and commissioning of feeder pillar cubicle type weather proof outdoor CPRI approved totally type tested both side openable IP:55 factory made having canopy dust and vermin proof fabricated from MS sheet 3.15 mm thick including powder coated and suitable for 415 volt 3 phase 50 c/s on PCC pedestal. Cost of cement concrete 1:4:6 (1 cement: 2 coarse sand : 4 stone aggregate) to be included in the rate offered for each item and Suitable size of panel mounting the following accessories with working space and wiring with cooper cable of suitable size complete as required and as per SLD & specification: ( Note: Installation /commissioning Height of feeder piller box should not be less that 0.5 meter above NGL) Incoming 63 Amp 4P MCCB 25 KA - 1 No. 0-63A Digital ammeter including CTs 63/5A Class 1, 15 VA - 1 set. LED phase indicating lamp controlled by 2A SP MCB - 1 set. Bus Bar Aluminium bus bar TPN 3 phase 4 wire insulated 100 AMP bus bar 25 KA grade, with proper colour coding phase wise. Outgoing 40A 4P MCB 10 KA, 415V - 6 No. Astronomical Timerswitch Astronomical Time switch 20 Amps 24 hour programming type with ML-3 Contactor 70A, 415 Volt, three phase, coil operating vontage 230 Volt, three point Auto manual switch 15 Amps for bypass system with 63A 4P MCCB adjustable( 40 % to 100 %) Microprecessor release , 35KA comple te incl necessary connection by using copper wire of size 16 Sqmm - 1 set.
Supply and fixing of cable route indicator for HT round shaped 150mm dia 10mm thick with marking of 11 KV, HT welded bolted on angle iron of 25x25 cm of 60 cm length grouted in PCC 1:3:6 TYPE C2 block of size 150X150x150mm embeded in ground including necessary earth work complete all as directed.
Supply and making end termination with brass compression gland and aluminium lugs for sizes of 1100V XLPE insulated cable mentioned here-in-after:-
3.5 Core 185 Sq.mm
3.5 Core 150 Sq.mm
3.5 Core 95 Sq.mm
3.5 Core 70 Sq.mm
3.5 Core 35 Sq.mm
4 Core 25 Sq.mm
4 Core 16 Sq.mm
4 Core 10 Sq.mm
4 Core 6 Sq.mm
Supply, and making straight through joint with cast resin compound and other jointing material for sizes of 1100V XLPE insulated cable mentioned here-in-after:-
3.5 Core 185 Sq.mm
3.5 Core 95 Sq.mm
3.5 Core 70 Sq.mm
3.5 Core 35 Sq.mm
HIGH MAST Supply, Installation, testing and commissioning of 20M high galvanised mast 12 lantern suitable for 12 Nos LED Flood Light fittings, symetrically fitted along with their driver and having 3 point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminnaire mounting arm, pully assembly,twin red LED aviation obstruction light 2X6 watt , lightning arrestor spike including RCC shallow foundation as per manufacturer design based on soil bearing capacity with integral power tool installed inside base compartment for operation suitable for wind velocity as per IS 875 Part 3, including & confirming to the following Providing pedestal type RCC foundation as per soil conditions including excavation, RCC shuttering, centering, etc. complete as required. LT Feeder Pillar Box Both Side Openable with projected Globe roof for rain water protection,manufactured by a CPRI approved Manu-facturer Dust and Vermin Proof , suitable for 440 Volt 3 Phase 4 Wire System made out of 3.15 mm thick CRCA Sheet of size 0.75MX0.7MX.40 Mand built upon Rigid Frame Work having Front and Rear hinged double shutter Doors with Neoprene Rubber Gasket, Epoxy Powder Coated including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X6mm Mild Steel Angle Iron Frame and 600mm above the Normal Ground Level comp -lete with PCC Foundation in Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) and Test-ing after Installation complete all as specified and comprising of the following :– (for controlling of high mast light) Aluminium Bus-bar 63 Amp, supported with suitable size of heavy duty Porcelain Stand Lock with suitable size Brass Nut, Bolts and Washers with Heat Shrinkable PVC Sleeving. The Bus-bar shall be Colour Coded (Red, Yellow and Blue) for 3 Phase and Black for Neutral.
Supply, installation, testing & commissioning of following LED flood light fixtures on the lantern carrier of high mast with corrosion resistant housing, Electronic Driver , earthing terminal, lamp, wiring, etc. complete as required as per specifications and approved drawings (12 Fittings per HM) 1X250W LED Flood Light Fixture with Pressure die-cast housing with lens (IP65) for High Mast Lighting MAke:- Philips Cat No-BVP410 LED 250 CW HE NB FG S3 XT, GE Cat No- ELHF3UHMCTSG or approved equivalent as per list of make.
Making hole in any kind of soil for road crossing by trench less technology ultrasound method supply & drawing HDPE pipe medium grade 150mm dia suitable for crossing of underground cable through it(1.5m below NGL/FGL whichever is low) and making good both the end all as directed.
Supply, installation, testing and commissioning of silent type 100 KVA DG set of following rating with Outdoor Type AMF Panel & acoustic enclouser panel confirmig to latest enviroment proctection regulations for emission and noise level comprising of radiator,water cooled, vertical multi-cylinder diesel engine equipped with fly wheel, 990 Ltrs fuel tank complete with MS concealed underground fuel line from fuel tank to DG engine, residential type exhaust silencer with suitable exhaust extension pipes from DG engine to top of the sub-station building as per pollution control requirements and fitted with facility for auto/manual start with electrical starting equipment directly coupled to an alternator of brushless, self excited, self regulated suitable for continuous operation at 1500 RPM at 0.8 lagging p.f., 3 phase, 50 Hz, 415V, 4 wire AC supply complete with base plate, antivibration pads, power & control cabling, etc. including AMF panel as detailed in the specifications and as required. Note:- Installation of D.G.sets on the foundation and including foundation providing necessary anti-vibration mountings battery and battery stand including first filling of lub oil, first filling of diesel for testing & commisioning & necessary load for testing & commissioning.
Supply and fixing 5 KVA DG set 50 Hz, 230V AC supply with change over switch complete as detailed in the specifications and as required and directed.
Supply, installation, testing and commissioning of electrically operated siren (Range - 1 Km Horizontal Single Mounting Siren 230V AC Single phase 50 Hz -Heavy Duty) all complete as specified and directed.
SAFETY EQUIPMENTS Supplying of Rubber hand gloves suitable for 11 KV.
Supplying and fixing of glass framed Shock treatment chart both in Hindi & English.
Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.
Supply and fixing Carbon dioxide fire extinguishers of 4.5 kg each as per IS : 2878-1976 and mounting the same on wall by means of suitable hooks.
Supply and fixing Dry chemical fire extinguishers 5 kg as per IS : 2171-1976.
Supply and fixing of 9 ltr chemical foam type fire extinguisher
Supply and fixing G.I. Fire buckets 13 litre capacity filled with dry sand and fixed on wall hook made out of 13mm dia MS rod & conforming IS 2546 - 1974.
Fabrication, Supply and installation of Canopy type MS structure for fixing 8 numbers of 13 litre capacity fire buckets.
Supply of First aid box containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required.
Supply & fixing of fire retardant / extinguishing Electrical Insulated synthetic mat of 3.0 mm thick + 10% conforming to latest BIS: DOC NO. ET-02 (5440) meeting requirements of IS 3043, IS 5216 (part-1, 2&3), IS 8437 and IEC 479, suitable for all voltages not exceeding 33 KV AC and having minimum width of 1000 mm +/- 20 mm and including supply of required quantity of adhensive / compound and fixing the same at site as per site requirement.
Supplying and Fixing of the Danger/Caution board for 11 KV size 250mm x 200mm x 2mm thick. as per the I.E. specifications.
Supplying and Fixing of the Danger/Caution board for 433V size 200mm x 150mm x 2mm thick as per the I.E. specifications.
Supplying and Fixing of the Caution board printed in signal red "Man on Line" as per the I.E. specifications.
Supplying and Fixing of the Caution board printed in signal red "Don’t switch on" as per the I.E. specifications.
EXTERNAL WATER SUPPLY S.F.R.C. manhole cover and frame (light duty, 2.5 MT grade designation) 450 x 450 mm (internal size) conforming to IS:12592 complete all as specified and directed.
Providing and fixing horizontal 40 mm dia Non Return Valve main body of Gun metal, screwed with operating pressure of 10 Bar. The valve shall be mounted on GI pipes. The special suitable to pipe on which it is to be mounted shall be measured and paid separately. The make of valve shall be Kartar or equivalent.
Construction of Tubewell of depth upto 75m (approx) along with supply installation testing & commissioning of borewell submersible pump all complete including transportation of equipment & material using electric bore logging machine, obtaining central ground water board report from the department before execution as required as per the tender specification/as approved by Engineer-in-Charge comprising of but not limited to the items mentioned here-in-after for bore well :
Boring / drilling 200 mm dia bore in all kind of soils, except hard rock ,complete all as specified & directed..
Extra for boring / drilling 200 mm dia bore in hard rock ,complete all as specified & directed..
Providing & fixing 100 mm dia UPVC blind pipe (Jain , finolex,superme or equivalent make) Class CM with threaded connections, couplers etc. as required all complete.
Providing & fixing 100 mm dia UPVC slotted pipe (Jain , finolex,superme or equivalent make) Class CM with threaded connections, couplers etc. as required all complete.
Providing & fixing 100 mm dia threated well cap, housing clamps, guide wires, tail plug etc. or any other tubewell fitting required ,complete all as specified & directed..
Providing peagraval filter fill of approved quality of size 1.5 x 6 mm between bore & pipe assembly or as required ,complete all as specified & directed..
Cleaning, developing, testing of tube well for its yield & quality of water with heavy duty air compressor ,complete all as specified & directed..
Supply installation, testing & commissioning of submersible pumpset of KSB, Kirloskar, Crompton make suitable for 200 mm bore with noryll/ bronze / ss impeller, ss shaft, mech. seal, built in NRV with 1.1 HP submersible squirell cage motor suitable for single phase, 415 volts + 10%, 50hz three phase, AC supply, water proof cable 2.5 sq mm Aerolex or euivalent make for connection to motor, 32 NB column pipe heavy class, Jindal / Surya make with pipe support clamps, elbow, nipple, pressure gauge assembly with isolation valve, on delivery pipe of pump set etc including electric DOL panel fitted with ammeter, voltmeter single phase preventer, MCB on/off switch push button duly wired and made out of 20 SWG sheet duly painted all complete as per specification /as approved by Engineer-in-Charge. Capacity - 0.5/0.9/1.3/1.5/1.8 cum/hr approx Head - 115/100/80/69/48 metre approx & 1.1 HP motor approx.
SEWAGE DISPOSAL S.F.R.C manhole cover and frame (Heavy duty, 20 MT grade designation) 560mm internal diameter conforming to IS 12592.
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dua steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on to surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 15 cn cement concrete block 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size complete as per design.
Supply and fixing of PWTS series Polyethylene Septic Tank of Sintex or equivalent make with capacity of 1600 litre per day, diameter of 1440 mm and height of 1550 mm suitable for 10 user capacity. Tank shall have three zones, first zone is septic zone where sludge is stabilized by anaerobic digestion. Second zone is sedimentation zone and the third zone is pall ring media zone having surface area of 190 Sq.mt / Cum and retain micro-organism long enough to digest the organic waste which results in 70% of BOD reduction from final out let. It shall be provided with inlet & outlet pipe of 100 mm dia, Vent pipe of 50 mm dia, Internal piping, manhole cover of 400 mm dia minimum all complete as required.
Making soak pit 2.5 m diameter 3.0 meter dee with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter , 1.8 m long complete as per standard design. With F.P.S bricks
DISMANTLING & DEMOLITION Dismantling of barbed wire of any description any position.
Demolition of steel watch tower
SCHEDULE "A" PART-XII (SCHEDULE OF CREDIT) Note :- Amount of Rs. 24,68,322.40 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.
Rds Project ltd.
D. K. PROJECT PRIVATE LIMITED
VISHAL INFRASTRUCTURE LTD
NSC Projects Pvt. Ltd.
SARAOGI BUILDERS LIMITED
Som Projects Pvt Ltd
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid