Vikramaditya Marg sthit Naya Upmantri Awas No.-02 me ek bedroom me farsh ki jarjar tiles badalne, ek shatigrast lohe ka darwaza badalna avem anya kharab teen darwaze badalna, puja kaksh me ek almari banana, dining room area ka sudharikaran va anya a

Dismantling Doors, windows and clerestory window (Steel or Wood) shutter including chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. DSR.No-15.12.1, (Rs-367.2/290.07)

Providing and Fixing of 1 mm thick M.S. Sheet door with frame of 40x40x6 mm angle lron and 3 mm m.s gusset plates at the junction and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using m.s. angles 40x40x6 mm for diagonal braces, DSR N0-10.5.1, (Rs-5804.35/4585.16)

Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DSR N0-9.20.1, (Rs-3473.85/2826.5)

Providing and fixing wire gauge shutter using galvanized M.S. wire guage of average width of aperture 1.4 mm in both directions with wire of dia 0.63, for doors, window and clerestory windows with hinges and necessary screws : 35, mm thick Shutter with ISI marked M.S. Pressed butt hinges bright finished of required Size Second class teak wood Jali Door . DSR No-9.27.1.1, (Rs-4852.3/3948.07)

Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DSR.N0-15.23.1 (Rs-73.4/59.72)

Providing and laying Vitrified floor Size of Tile 600x1200 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DSR-11.41A.2.2) (Rs-1798.8/1420.96)

Supply and Fixing of S.S. Jali 125 mm dia, (Rs-150)

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR No-18.32.1, Rs-1992.6/1574.06

Providing and Fixing of Wall to Wall Wooden Almirah with 19mm thick Century Ply Board ISI marked lncluding Laminated Both Side 1 mm thick Sunmica Supirior quality Fixing with Glue and Nails etc S.S.Handle, S.S.Hinges Magnet. Lock etc. Complete work as Per Direction of Engineer in Charge. (Rs-13600)

Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLP CHR-5053PM, including supply of all material & labour and T & P etc. requird for proper completion of work. (Rs-1358)