REPAIR REPLACEMENT OF PERIMETER LIGHT STREET LIGHT SOLAR LIGHT AND CONROL SYSTEM AT TECHNICAL AREA UNDER AGE EM I AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 23-24 Ser No. 70 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Taking down and dismantling existing street light /flood light/ high mast/ Solar light fitting any type any wattage complete all as specified and directed.

Taking out cable loop after necessary excavation , cutting the burnt out damage end of cable ,refixing the cable providing suitable size of brass cable gland and aluminium lugs complete with all necessary connection with the existing system and refilling of excavated soil making finishing with the existing ground surface complete all as specified and directed for the following sizes:-

2/3.5/4 core 4 to16 Sqmm

3.5/4 core 25 to 35 Sqmm

3.5 core 50 Sqmm

3.5 core 70 to 95 Sqmm

M&L for checking & serviceability Street lights/flood lights/tower lights/highmast lights etc and found unserviceability during checking as per directed by department ,rectification of fault of Street lights/flood lights/tower lights/high mast lights etc by deploying resource with all tools & plants, telescopic ladder, gaskets safety arrangements and including providing minor materials like insulation tap insulation tap/wire connecter/repairing of junction box with lugs/nut bolts etc by contractor to make light serviceable within same day after receving complaint from department complete all as specified and directed. .(Notes:-Each Job shall consist of 8-10 number of complaints )

S&F in repairs Driver for LED lights as per existing make for the following capacity complete all as specified and directed :-

Driver for 70/72watts LED

Driver for 90 watts LED

Driver for 120-150 Watts LED

Driver for 180-200 Watts LED

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 60 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4 KV in-built and 10 KV external surge protection,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 72 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,,4 KV in-built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 90 watts energy saving & environmental friendly long life versatilepressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection, over voltage protection,short circuit protection ,open circuit protection ,4 KV in-built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 120 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass, individual LEDs with secondary lens optics with IP66 ingress protection , over voltage protection,short circuit protection ,open circuit protection ,4 KV in-built and 10 KV external surge protection,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 30 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4 KV in-built and 10 KV external surge protection ,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 80 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,,4 KV in-built and 10 KV external surge protection ,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 120 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,,4 KV in-built and 10 KV external surge protection,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 150 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection , over voltage protection,short circuit protection ,open circuit protection ,,4 KV in-built and 10 KV external surge protection,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 180 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,,4 KV in-built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

M&L for preparation of old painted surfaces of steel tubular pole/strut, of any description and in any position 9.00/8.50 Mtr height and scrapping of pole with emery paper and M&L for applying two coats of aluminium paint on all the metallic surfaces including protection pipe,clamps, GI pipe bracket of street/security light, and pasting reflector tape 3 differnt colour for around the pole with & including applying one coat of white wash on coping of pole and numbering of street poles alongwith Sub station name complete all as specified and directed.

M&L for preparation of old painted surfaces of PCC pole of any description and in any position 9.00/8.50 Mtr height and scrapping of pole and M&L for applying two coats of cement paint on PCC surfaces and applying two coat of aluminium paint on all the metallic surfaces including protection pipe,clamps, GI pipe bracket of security light, and pasting reflector tape 3 differnt colour for around the pole with & including applying one coat of white wash on coping of pole and numbering of street poles alongwith Sub station complete all as specified and directed.

S&F 2.5 sqmm FRLSH PVC insulated single core unsheathed industrial multistrand cable with flame retardent low smoke (FRLSH) properties with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 complete all as specified and directed.

Supply ,Laying, jointing, connecting & testing XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / pipe ducts of following sizes incl taking out cable any size complete all as specified and directed

2 core 6 Sqmm

4 core 10 Sqmm

4 core 16 Sqmm

3.5 core 25 Sqmm

3.5 core 50 Sqmm

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point complete all as specified and directed.

S&F in repairs MS nut bolts,SS nut bolts ,clamp ,screw of different size and sample complete all as specified and directed.

S&F 63 mm outer dia ,double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed.

Dismantling of existing panel including disconnecting connected cables, etc. and M&L for supplying, installing, testing and commissioning of factory made LT cubical double door panel with roof canopy, outdoor type, of Suitable to accomodate the following accessories made out of CRCA sheet 3 MM thick duly powder coated with Seimens Grey Shade RAL 7032, totally enclosed, dust and vermin proof outer cubicle. Inner cubicle should be made out of 2 MM thick CRCA sheet with working voltage of 415V, 50 Hz, 3 phase 4 wire fully compartmentalised with single door system for each compartment. Outer cubicle having both sides door openable and Bus bars provided shall be adequately supported on insulators to withstand dynamic stresses due to short circuit current and shall be suitably colour coded with heat shrinkable sleeve for phase indication. The standard phase arrangement when facing the switchgear shall be R-Y-B from left to right.

The bus bar connections and their insulated supports shall be mechanically strong, and shall withstand all the stresses which shall be imposed upon them in ordinary working due to fixing, vibration, fluctuation in temp., shot-circuit or other causes. The bus bar should be supported on DMC. Provision shall be made for expansion and contraction of the bus bars and connections with variation of temp. Internal wiring should be done with 2.5 sqmm multi-stranded copper conductors and shall be properly bunched, tied, ferruled for proper identification, crimped and shall be connected with suitable lugs and PVC sleeves, etc. The bottom of the panel should contain detachable plate having provision for entry of armoured cable of adequate size with glands. Threaded earthing studs - 02 Nos shall be provided at the bottom and lifting lugs of suitable size at top to lift the panel safely shall be made. The cubicle incomer MCCB as well as outgoings shall have copper TPN/TP extension links of current rating not less than 1.5 times the rated capacity of individual feeders with Ics = 100% Icu in all MCCBs with extended Rotary Handle. The cubicle should be inclusive of following : The cubicle should be inclusive of following :

(b) Power contactor 3 pole,type ML-3, with 2 NO + 2 NC aux contacts with standard coil voltage 415 volts, Rating 70 Amp - 01 No. as per Cat No. SS90910 of M/s L & T, Siemens, Schneider including testing connecting commissioning complete all as specified and directed. (c) Fuse holders suitable for bolted fuse-links Both side cable (Front) 32 Amps - 03 Nos (d) Single phasing preventing, under voltage, over voltage and neutral Loss protection relay 415 VAC, 3 Phase 4 wire, 2 C/O and with technical parameters as per M/s L&T Cat part no. - MAC04 D0100 - 01 No. (e) Double pole toggle switch ON-OFF-ON, 250 V, 20 A - 01 No. (f)multi function meter having LCD Display,96 x 96 sq.mm -01 No (g) Current transformer of suitable ratio, Accuracy - 5VA, Class - 1. (h) LED INDICATORS RIBBED LENS WITH TRIMMED COLLAR - Red, Yellow and Blue - 1 Each, (j) Aluminium bus bar of size 200 Amps rating for R-Y-B phases and Neutral. (k) Base frame for cubical mounting made out of 40x40x6mm equal angle iron duly painted. (l) Foundation for the panel should provided with PCC 1:4:6 at a depth of 150 MM below G.L. and 100 MM above the G.L. with slot openings for I/C and O/G cables.

M&L for Earthing complete with GI earth plate electrode 60cm x 60 cm x 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including GI strip 32 x 6 mm by means of bolts, nuts and check nuts and washers etc made of GI & connected to Earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt-I incl all necessary earth work, excavation, PCC chamber, chamber cover with handle (PCC 1:2:4) including 40 mm dia protection pipe & 20 mm dia watering pipe and wire mesh funnel etc complete all as specified and as directed. Note: GI strip 32x6mm GI medium grade protection pipe 40mm dia upto 7.5m is deemed to be included in the quoted unit rate.

Supply and erection of steel tubular swaged pole 410 SP 22, 8.5 Mtr long ,swan neck complete with cast iron base plate, finial Taper plug, bolts, nuts, and screws as specified type conforming to IS 2713 complete with & including 2 coats of aluminium paint over one coat of red oxide zinc chrome primer on external exposed surfaces and 2 coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole including taking out old pole, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm gradded stone aggregates as in foundation of pole complete all as specified &directed.

M&L for PCC type B-1, 1:2:4 using (20 mm gradded stone aggregate) as in coping, including form work complete all as specified & directed.

S&F MCB SPN of 6-32 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 complete all as specified and as directed

M&L for repair of high mast pole of 16 Mtr including servicing of gear box ,servicing of motor and connected accessories complete all as specified and as directed

S&F 10 mm galvanised steel wire rope multi stranded complete all as specified and as directed

S&F Cable Junction Boxes IP 66 ,weather proof, for outdoor installation of size 155 mm x210 mmx92 mm complete with electrolytic aluminum bus bar suitable cable size 10-16 sqmm for 3 phase and neutral fixed on ebonite insulator and one SPN 6-16 A complete all as specified and directed.

S&F Cable Junction Boxes IP 66,weather proof, for outdoor installation of size 205 mm x255 mmx112 mm complete with electrolytic aluminum bus bar suitable cable size 10-25 sqmm for 3 phase and neutral fixed on ebonite insulator and one SPN 6-16 A complete all as specified and directed.

S&F in repairs bracket for street light fittings made out of 40 mm bore medium grade GI tubing 1.5 m long bent to shape inculding fabrication work ,clamp ,nut & bolts and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer repair complete all as specified and as directed

M&L for street light bracket 1.5 mtr long made out of 50mm dia medium grade GI tube one and duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threding and weldeding work required for fixing of street light fitting complete all as specified and directed.

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 50 watts of RGB,GDY energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,external surge protection as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 150 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,surge protection,LED CCT is 3000 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

PRASHANT ENTERPRISES

ELECTRO ASSOCIATES