Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance NO 33 BAJANAI KOVIL STREET PERANAMPAKKAM SEMMIYAMANGALAM CHETPET TALUK TIRUVANNAMALAI DISTRICT 606 904 | SEMMIYAMANGALAM | TIRUVANNAMALAI | TAMIL NADU | 606904 | Admitted-Finance |
Tender Value
₹49.5 L
EMD Value
₹49,500
Closing Date
19 Jan 2023, 3:00 pmClosed
Additional Collector (Dev.), DRDA
DRDA, Tiruvannamalai
Construction of Yoga Hall at First floor of Hostel Building in RIRD Campus in S.V.Nagaram Panchayat of Arni Block under RGPSA Infrastructure works
2022_RDTN_274303_1
A13/2998/2022 Dated. 15.12.2022
Open Tender
Civil Works - Buildings
Item Rate
180 days
S V Nagaram
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹49,500
23 Jan 2023
22 Dec 2022
19 Jan 2023
22 Dec 2022
19 Jan 2023
22 Dec 2022
Amount
Construction of Yoga Hall at First floor of Hostel Building in RIRD Campus in S.V.Nagaram Panchayat
Dismantling Clearing the pressed tiles and weathering course away and carefully Stacking Material Etc.complete in (SI No 38B)
Dismantling Clearing Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)
Supplying and erecting steel centering for For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. For Columns, Lintel and Sunshade
Supplying and erecting steel centering for For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. For Columns, Lintel and Sunshade
Supplying and erecting steel centering for For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. Above Sill Level
Providing and laying in position Cement CONCRETE M25 Grade using ordinary portland cement with water content not exceeding 0.45 including use of plasticizer of approved make & dosage of required grade at all locations and levels using 20mm size & down graded aggregates, in all types of works including hire charges for pump and dimping charges to the required locations, machine vibrating, tamping, curing, providing fixtures like fan clamps, beading as specified, charges for conveyance of RMC plant to tthe site or all as required (excluding cost of reinforcement and fabrication charges, centering and shuttering). Mix design details to be got approved before commenecement of the work adopting pour card system by the departmental officers etc., complete as per ISI 4926 of 1976/1990
Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)
Brick work CM 1:5 best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)-Fe 500 Grade
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Providing and applying emulsion paint finish of approved make & shade in two coats over a coat of approved primer and to give an even shade as per manufacturer's instruction to the internal plastered surfaces including preparation of surfaces, scaffolding etc. all complete as per drawings and specification for all heights. (Ceiling work)
Supply and fixing of cuddapah slab including all labour charges etc complete
Towards cost and supply of upvc door and windows including all labour charges etc complete
ELECTRICAL ARRANGEMENTS :
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable Colour for PVC concealed light (For Light/Fan Point.) (SD 17)
Supply and fixing of energy efficient 11W lamp on the battern holder (SD 80)
Supply and fixing of single box type 4'40 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 87)
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD107)
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box(SD 133)
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour (SD 55)
Supply and fixing of 15 Amps and 20 Amps socket with switch including all charges etc complete(SD No.137)
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Kothanya Construction
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .