SPECIAL REPAIR OF WINDOW, DOORS, SEVERE SEEPAGE IN THE WALLS CEILING AND BATHROOM OF BLDG NO P-93 OF ARMD REGT AT NAMKUM POCKET OF RANCHI MIL STN UNDER GE RANCHI

Amount

Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc, complete all as specified and directed.

M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with chemical compound in the proportion, chemical compound SUPER LATEX of DR FIXIT of PIDILITE INDUSTRIES LTD, water & cement (1:4:7) or SBR LATEX of STP LTD or other equivalent as per manufacture instructions for bonding of old concrete surface to new concrete, complete all as specified and directed. Note:- WPC will be measured and paid seperately.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW mixed in proportion 200 ml per 50 Kg cement of DR FIXIT of PIDILITE INDUSTRIES LTD, or STP No 1 (LIQUID) of STP LTD in proportion 200 millitire per 50 Kg cement, as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified and directed.

M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed NOTE : water proofing liquid will be measured and paid seperately .

M&L for Water proofing treatment on "Approachable /Accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (iii) Applying evenly tack coat of industrial 85/25 grade @ 1.2 kg/ Sqm. (iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Supply only water proofing compound (liquid),ISI marked.

M&L for 22 mm thick 'machine cut & polished' cement concrete tiles factory made conforming to IS-1237 (ISI Marked) with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 20 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW OF DR FIXIT OF PIDILITE INDUSTRIES LTD 200 ml per 50 kg cement, as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG OF DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instruction, complete all as specified & as directed, Cutting and polishing of top surfaces of tiles after fixing is not required.

S&F factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm),sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water ets, making arrangement for fixing of hardware, EPDM gasket. 1.2 + 0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos,sliding sash (30mm x 18mm) 2nos,sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate excludes cost of glass and includes all oyher connected accessories) area n.exc. 2.00 sqm each fixed from ground floor to height of 12 floors.

S&F 7 mm thick aluminium grills of make "Decogrill" model DG 104 surrounded by aluminum 'C' channel and size of opening 75x75 mm all as specified and directed fixed from ground floor to height of 12 floors

S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane

S&F 4.8mm thick tinted glass ordinary quality and glazing with rubber gasket in squares exceeding 0.50 sqm in each pane

S&F of staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium/pvc sections fixed from ground floor to height of 12 floors

M&L for taking down shutter of any description, area n exc 1 Sqm each for repairing the steel windows/cup board shutters in any position by replacing the projecting type hinges (Single pane) welding the new box type hinge and refixing the shutter including applying two coats of synthetic enamel paint over a coat of primer and making the surfaces good all as directed .

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc, complete all as specified and directed.

S&F in repair 18/19 mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc, complete all as specified and directed.

S&F continuous (Piano) hinges M S bright finish or Electro galvanized 40 mm wide flaps (when open).

S&F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished.

S&F 2nd class hardwood plain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area exc 13 & n exc 25 Sqcm, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

M&L Half Brick thick wall with sub class 'B' bricks built in CM 1:4

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water, complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick /concrete surfaces in cm (1:4), finished even and smooth (Without using extra cement), complete all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two coats on fair faces of brick work , finished even and fair without using extra cement with WPC.

M&L rendering 05 mm thick in CM 1:3 on fair faces of concrete finished even and fair in ceilings

M&L preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of cement based paint white or tinted over a coat of cement primer complete as specified and directed.

M&L three coat of white wash on newly prepared surfaces on ceilling etc, complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of chalk whiting, complete all as specified & directed.

All as per item above 29 above but on ceiling.

M&L preparing old decorated surfaces, plastered or unplastered and applying one coat of white wash on walls of buildings, complete all as specified and directed.

M&L preparation of old decorated surfaces, washing, rubbing down, stopping and applying one coat of cement base paint on walls, etc white or tinted, complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted, complete all as specified and directed.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc, complete all as specified and directed.

M&L 40 mm thick PCC type B - 1, 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement, complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor, complete all as specified and directed.

M&L for cement concrete type E-2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 with water proofing compound 2% by wt of cement, finished even and smooth without using extra cement in sunken portion complete all as specified. Note:- WPC shall be measured and paid separately

Supply only integral water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

Roughening surfaces of old concrete floor by picking , sweeping cleanand washing down with water to remove dust etc and Brushing neat cement slurry with 3 kg of cement per SM.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in, skirting, dado, etc incl 15mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed bed in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each incl stacking for issued under Sch of Credit.

All as per item No 51 above but exc1.5 Sqm but n.exc. 4 Sqm.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as specified.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165.

M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc, complete all as specified and directed.

M&L 35 mm thick 2nd class hardwood, factory made plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1),kiln seasoned and chemically pressure treated & and fitted to chowkats, complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood, factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters of any no of panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden patti etc, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S& F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate, complete all as specified and directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer, complete all as specified and directed.

M&L for preparing old painted wooden surfaces of any description not otherwise described , over 10 cm in girth or width and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm.

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc, complete all as specified and directed.

M&L for RCC as in kitchen platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work, complete all as specified and directed.

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

M&L machine cut cudappa stone slab 16+ 2mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20 mm thick for layinng floor finishes in CM 1:4 for fixing tiles/stone.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

Taking up or down GI steel tubing in any position and connection including fitting, eleanings for reusing if any as specified and as directed for the following size :-

15mm bore

20mm bore

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors etc complete all as specified for the following size :-

15mm bore

20mm bore

Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified for the following size :-

15mm bore

20mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed .

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc, complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed both ends for or iron pipe or for unions and fixed, complete all as specified and directed

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete, all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc, complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as directed and specified.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws, complete all as specified and directed.

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F CP towel rail, 20mm dia, D type,60cm long, complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms), complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm, complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Taking down eaves gutter and rain water pipes (any size or pattern ) including all fittings, heads shoes bend swan necks etc at any position (measure overall as fixed along the centre line over fitting and accessories), complete all as specified and directed.

S& F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bends or shoe of 110 mm dia bore.

PVC (SWR) junction single, (Single T) 110 mm dia bore equal or unequal

M&L for repairing broken edges of chajja's, roof projection, Fascias etc. In small widths/depths (exposed area not exc 0.16 Sqm) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4, Type B-0, using 12.5 mm Crushed stone aggregates, to match the exisitng surfaces incl removing debris, necessary scaffolding etc,complete all as specified and directed. Note : Reinforcement if any provided shall be measured and paid separately.

M&L for expanded metal n.exc 4Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and directed.

M&L for taking down and repairs in patches (area n.exc 2.00Sq min each patches) to plaster/loose surfaces of concrete slabs in sun-shades, chajjas, fascia,shelves, cills, landingsin cement mortar 1:4 /cement concrete 1:2:4 including all necessary arrangments for complete repairs all as specified and directed. (Note : Reinforcement / expanded metal if any provided shall be measured and paid separately)

M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall, complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying two coats of synthetic enamel paint over a coat of red oxide primer for change of existing colour complete all as specified and as directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface.

M&L for point wiring with colour coding multi stranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly , complete all as specified and directed.

All as per item No 113 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmm wire with 1.5sqmm earth wire.

All as per item No 113 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5sqmm earth wire

All as per item No 113 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way (Make : Anchor/Havells/Indoasian ( ISI marked)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) , Make : Anchor/Havells/Indoasian ( ISI marked)

S&F Socket 15 Amps flush type 230 Volts , AC complete. Make : Anchor/Havells/Indoasian ( ISI marked)

S&F switch 15 Amps flush type 230 Volts , AC complete. Make : Anchor/Havells/Indoasian ( ISI marked)

S&F 5 step fan regulator single pole, 240 Volts, complete all as specified & directed. Make- Anchor/Havells

S&F Bell Push single pole, 240 Volts complete all as specified & directed. Make- Anchor/Havells

S&F Ding Dong door bell, complete all as specified and directed. Make : Anchor/Havells/Indoasian ( ISI marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, Make : Anchor ISI marked. Make : Anchor/Havells/Indoasian ( ISI marked)

S&F angle lamp holder PVC/Polycarbonate base / back suitable for with LED bulb 10 W. Make : Anchor/Havells/Indoasian (ISI marked)

S&F lED bulkhead 10W with IP 65 protection 240V Make- Bajaj Havells or equivalent in Phillips

S&F LED Mirror Light 10 Watt with diffuser, Decorative type,complete all as specifed & directed. Make :-Crompton or equivalent in Phillips/ Havells

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : or equivalent in Havells bajaj

Dismantling and taking down existing unserviceable submain wiring from batten/conduit of any size and making good to disturbed surfaces to match the existing surfaces.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories, complete all as specified and directed. Make- Havells/Finolex

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.

Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified.

Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point, complete all as specified and directed.

Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trench.

S&F for old size brick well burnt, laid flat, for cable protection, complete all as specified and directed.

Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, ccomplete all as specified and directed. Make- Grandlay/Havells/Finolex

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing .

S&F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways. Make:-Indoasian/Havells / Legrand / L&T .

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc. Make:-Indoasian/Havells / Legrand / L&T .

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc. Make:-Indoasian/Havells / Legrand / L&T.

S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc. Make:-Indoasian/Havells / Legrand / L&T .

S&F Distribution board 04 way TP&N Vertical Loadline Double Door are fitted with Bus Bars, Neutral Links, Blanking Plates, Suitable for FP MCCB. Make:-Havells / Legrand / L&T

S&F CRCA sheet metal enclosure double door, outdoor type suitable size for 04 Nos Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC etc, complete all as specified and directed. Make:-Indoasian/Havells / HPL / L&T .

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

Rajeev Ranjan

M/s Pramod Kumar Singh

M/S Sahib N Sahiba Enterprises

M/S AMOD KUMAR PANDEY

BHARATI ENTERPRISES

Balaji Construction And Company

M K Enterprises