Construction of 33 kV Line from Sangsangnyu to Tobu and 33/11 kV, 2.5 MVA Sub-station at Tobu under Mon.

Amount

A. Supply of Materials for Construction of 33 KV Line

ACSR Mink 6/1/3.66 mm

Steel tubular pole SP 45 (Half-Galvanised)

70 KM Ball & Socket (B&S) Type 11 kV Disc Insulator, complete

Hardware fittings for B&S Disc Insulator, complete

33 kV Pin Insulator, complete with GI pin

MS Channel 100x50x6 mm for X-arm, 27.6 kg per channel

3.5 Mtr length weighing 12.25 kg for disgonal member

2.5 Mtr length weighing 8.75 kg for horizontal member

Guard Bracket

Stay set 19 mm dia. 1.6 Mtr length with stay rod and bow plate

GI Stay wire 7/10 SWG weighing 43.4 kg per 100 mtr coil. 12 mtr per stay

Danger plate for 33 kv

MS Double Clamp 4.5" (115 mm) dia (top)

MS Single Clamp 4.5" (115 mm) dia (top)

MS Single Clamp 5.5" (140 mm) dia (middle)

GI Nuts & Bolts 5/8" x 3" (16x75 mm)

GI Nuts & Bolts 5/8" x 3" (16x200 mm)

GI Washers 5/8" x 3" (18 mm dia for 16 mm bolts)

B. Supply of Materials for Construction of 2.5 MVA Sub-Station

Structure for 33KV and 11KV bay

GI Steel Tubular Pole SP 76 (33KV bay- 4 nos, 11KV bay 6 nos )

GI MS Channel 100x50x6mm for cross arm and support of equipment - 2.2 M Long weighing 20.24 kg each (Galvanised)

GI M.S Angle 50x50x6x5000 mm each weighing 22.5 Kg (Galvanised)

Pole Double Clamp of G.I flat 50x6 mm

GI Nuts & Bolts with washer ( Assorted sizes including through bolt)

33KV SIDE EQUIPMENT

33KV VCB

33 kV SF6 circuit breaker, 3-Ph (out-door type ) complete

CURRENT TRANSFORMER (METERING AND PROTECTION)

INCOMING

Supply of 33kv, single pole, single phase,outdoor type with ratio 400-200A/1-1A, 15 VA burden, class accuracy 0.5 Line CT for metering , The CTs will be complete with bimetallic terminal for connecting ACSR wires, wheather proof

33kv, single pole, single phase,outdoor type with ratio 200-100A/1-1A, 15 VA burden, class accuracy 0.5 Transformer CT for metering and TRF differential protection complete with bimetallic terminals, weather proof secondary terminals, including all accessories.

POTENTIAL TRANSFORMER

Supply of outdoor, single pole Potential transformer with voltage ratio(33/√3 kV)/(110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor , whether proof second

33 KV ISOLATOR

Isolator suitable for a system voltage of 33 KV, rated current of 400 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type, pole mounted suitable for horizontal mounting with EARTH SWITCH

Isolator suitable for a system voltage of 33 KV, rated current of 400 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITHOUT EARTH SWITCH

33KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II - for 33/0.4KV Station Transformer

33 KV Drop Out fuse of rated current 100 A/ 200 A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II. For 33/0.4 KVStation Transformer

LIGHTNING ARRESTOR

30kV, 10 kA single pole, class2,station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors. for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories.

DISCHARGE ROD

Supply of discharge rod with clamp having screw type arrangment for fixing tightly on conductor(ASCR) for panther with boalt nut and saddle for earthwire. The operating rod fixed with clamp shall be made of telestone fiber glass tube suitable for 33/11 KV

11KV SIDE EQUIPMENT

11 KV VCB

11 KV VCB 3-ph, with Indoor Panel consisting of Vacuum Circuit breaker, CT, PT, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, OC/EF Relays (numerical) , Master trip relay (numerical), Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram etc. & other components as per Technical Specifications. The breaker should be supplied with mandatory/recommended spares such as VI, Trip Coil , indicating lamps etc. ABB/SCHNEIDER/CROMPTON/TOSHIBA Make

11 KV CURRENT TRANSFORMER (METERING AND DIFF PROTECTION)

Supply of 11kv, single pole, single phase,outdoor type with ratio 500-400A/5-5A, 15 VA burden,PS class accuracy 0.5 Transformer CT for metering and differnetial protection. The CTs will be complete with bimetallic terminal for connecting ACSR wires, whe

Supply of 11kv, single pole, single phase,outdoor type with ratio 600-300A/1-1A, 15 VA burden,PS class accuracy 0.5 Neutral CT for protection. The CTs will be complete with bimetallic terminal for connecting ACSR wires, whe

Supply of 11kv, single pole, single phase,outdoor type with ratio 200-100/1A, 15 VA burden, class accuracy 0.5 Line CT for metering, The CTs will be complete with bimetallic terminal for connecting ACSR wires, whether proof secondary terminals,

POTENTIAL TRANSFORMER

Supply of outdoor, single pole Potential transformer with voltage ratio(11/√3 kV)/ (110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conduct0r

11 KV ISOLATOR

The isolator shall be suitable for a system voltage of 11 KV, rated current of 800 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITHOUT EARTH SWITCH

Isolator (3-phase) suitable for a system voltage of 11 KV, rated current of 800 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITH EARTH SWITCH (for Line)

LIGHTNING ARRESTOR

9kV, 10 kA single pole, class 2, station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories.

Supply & fixing of 33 KV Pin/Post Insulators with Pin

Supply & fixing of 11 KV Pin/Post insulators with Pin

Supplying and Fixing Disc Insulators (Polymer) 70 KN BS type

Supply & fixing of Steel Fabricated items, additional requirement.

Control & Relay Panels

33 KV Control & Relay Panels

Indoor Relay and Control Panel (consisting of OC/EF numeric relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Feeders Incomer) Breakers

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Differential relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - for Transformers HV Incomer Breakers

11 KV Control & Relay Panels

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Differential relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Transformers LV incomer Breakers

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Outfoing Feeders and Bus Coupler Breakers.

OVERHEAD CONDUCTOR

PANTHER ACSR Conductor

40mm dia GI pipe

80mm dia GI pipe

Copper Control Cables

Supply of 5 C X 2.5 mm sq.

Supply of 10 C X 2.5 mm sq.

Supply of 12 C X 2.5 mm sq.

HT Power Cables

Supply of 33 KV 1 x C 400 sqmm XLPE Al.(for connecting Power Transformer Primary and from Incomer 33KV feeder to Bus)

Supply of 11 KV 1 x C 300 sqmm XLPE Al.(for Connecting Secondary of Power Transformer to 11KV Bus to Outgoing Feeder)

Supply of 11 KV 3C X185 sq. mm. XLPE Al. (For DT)

LT XLPE Armoured Aluminium Power Cable of following sizes, 1.1KV

PVC insulated AL armoured Power cables 2 xC, 25 sqmm

PVC insulated AL armoured Power 3½ xC, 35 sqmm

PVC insulated AL armoured Power 3½ x C, 70 sqmm

PVC insulated AL armoured Power 3.5C X 95 SQ.MM

PVC insulated AL armoured Power 3.5C X 120 SQ.MM

LT XLPE Unarmoured Copper Power Cable of following sizes, 1.1KV

PVC Insulated CU unarmoured Power cables1C x 25 SQ.MM.

PVC Insulated CU unarmoured Power cables1C x 70 SQ.MM.

Termination Kit

Supply of 33 KV Termination Kit for 1 C X 400 mm sq. XLPE cable( for connecting 33kV Auto recloser to Power Transformer Primary and for Incomer 33KV feeder to Bus)

Supply of 11 KV Termination Kit for 1 C X 630 mm sq. XLPE cable ( for Connecting Secondary of Power Transformer to 11kV Incomer Auto Reclosers and for Autorecloser to outgoing feeder - 4 outgoing 11KV Feeders).

Supply of 11 KV Termination Kit for 1 C X 185 mm sq. XLPE cable ( for DTs etc).

Earthing & Lightning Protection

Supply of 3.0 mtr 40mm dia GI Pipe Earthing

Supply of Copper Plate Earthing for Transformer Neutral (600x600x3.15)

Supply of Earthing Strip

75X6mm GI Strip

50X10mm GI Strip

50X6mm GI Strip

25X3mm GI Strip

50X6mm Copper Strip

Supply of CT & PT Jnc Box (12 way)

Lightining spike

Down conductor for Lightining spike (25x3mm GI Strip)

Control Room Auxiiaries

24V, 65AH, Lead Acid type Battery Set at 10 Hr Discharge Rate consisting of 11 Nos., each of 2.2V Cell having float level indicators, terminal connectors along with suitable wooden rack, required quantity of acid, distilled water & all other accessories and connectors required for installation, testing & commissioning as per technical specifications.

Transistorised Battery Charger Set with full wave rectification, 1-ph, 200/240V, 50Hz Input Voltage for charging 24V, 65AH Battery along with required cable, connectors etc. for conection with 24 V 64AH Battery Set & 220V AC Source and 24V DCDB

415 Volt LTAC Panel as per specification with 250A TPN MCCB as incomer ,2x 100A MCCB,2x32A TP ,5x16A TP, 4x16A DP,1x32A DP MCB.

24V DCDB as per TS & the Electrical Layout

Supply, of following Transformers

33/11KV, 2.5 MVA Oil Type Transformer

33/0.433KV, 25 KVA, oil type Station transformer

Description of Work / Item(s)

Amount

A. Erection, Installation & Comissioning of Materials for Construction of 33 KV Lines

ACSR Mink 6/1/3.66 mm

Steel tubular pole SP 45 (Half-Galvanised)

70 KM Ball & Socket (B&S) Type 11 kV Disc Insulator, complete

Hardware fittings for B&S Disc Insulator, complete

33 kV Pin Insulator, complete with GI pin

MS Channel 100x50x6 mm for X-arm, 27.6 kg per channel

3.5 Mtr length weighing 12.25 kg for disgonal member

2.5 Mtr length weighing 8.75 kg for horizontal member

Guard Bracket

Stay set 19 mm dia. 1.6 Mtr length with stay rod and bow plate

GI Stay wire 7/10 SWG weighing 43.4 kg per 100 mtr coil. 12 mtr per stay

Danger plate for 33 kv

MS Double Clamp 4.5" (115 mm) dia (top)

MS Single Clamp 4.5" (115 mm) dia (top)

MS Single Clamp 5.5" (140 mm) dia (middle)

GI Nuts & Bolts 5/8" x 3" (16x75 mm)

GI Nuts & Bolts 5/8" x 3" (16x200 mm)

GI Washers 5/8" x 3" (18 mm dia for 16 mm bolts)

CIVIL WORKS

Job- PCC 1:3:6 Grouting of Poles (2ftx2ftx4 ft) per pole - 0.45 Cum)

Job-Grouting for Stay

B. Erection, Installation & Comissioning of Materials for Construction of 2.5 MVA Sub-Station

Structure for 33KV and 11KV bay

GI Steel Tubular Pole SP 76 (33KV bay- 4 nos, 11KV bay 6 nos )

GI MS Channel 100x50x6mm for cross arm and support of equipment - 2.2 M Long weighing 20.24 kg each (Galvanised)

GI M.S Angle 50x50x6x5000 mm each weighing 22.5 Kg (Galvanised)

Pole Double Clamp of G.I flat 50x6 mm

GI Nuts & Bolts with washer ( Assorted sizes including through bolt)

33KV SIDE EQUIPMENT

33KV VCB

33 kV SF6 circuit breaker, 3-Ph (out-door type ) complete

CURRENT TRANSFORMER (METERING AND PROTECTION)

INCOMING

Supply of 33kv, single pole, single phase,outdoor type with ratio 400-200A/1-1A, 15 VA burden, class accuracy 0.5 Line CT for metering , The CTs will be complete with bimetallic terminal for connecting ACSR wires, wheather proof

33kv, single pole, single phase,outdoor type with ratio 200-100A/1-1A, 15 VA burden, class accuracy 0.5 Transformer CT for metering and TRF differential protection complete with bimetallic terminals, weather proof secondary terminals, including all accessories.

POTENTIAL TRANSFORMER

Supply of outdoor, single pole Potential transformer with voltage ratio(33/√3 kV)/(110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conductor , whether proof second

33 KV ISOLATOR

Isolator suitable for a system voltage of 33 KV, rated current of 400 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type, pole mounted suitable for horizontal mounting with EARTH SWITCH

Isolator suitable for a system voltage of 33 KV, rated current of 400 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITHOUT EARTH SWITCH

33KV, 400A, 3-ph, Gang switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and other accessories complete as per IS : 9921 (Pt. I to IV) or its latest amendment and TS Vol II - for 33/0.4KV Station Transformer

33 KV Drop Out fuse of rated current 100 A/ 200 A/400A, complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III) as amended from time to time and tech spec Vol-II. For 33/0.4 KVStation Transformer

LIGHTNING ARRESTOR

30kV, 10 kA single pole, class2,station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors. for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories.

DISCHARGE ROD

Supply of discharge rod with clamp having screw type arrangment for fixing tightly on conductor(ASCR) for panther with boalt nut and saddle for earthwire. The operating rod fixed with clamp shall be made of telestone fiber glass tube suitable for 33/11 KV

11KV SIDE EQUIPMENT

11 KV VCB

11 KV VCB 3-ph, with Indoor Panel consisting of Vacuum Circuit breaker, CT, PT, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, OC/EF Relays (numerical) , Master trip relay (numerical), Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram etc. & other components as per Technical Specifications. The breaker should be supplied with mandatory/recommended spares such as VI, Trip Coil , indicating lamps etc. ABB/SCHNEIDER/CROMPTON/TOSHIBA Make

11 KV CURRENT TRANSFORMER (METERING AND DIFF PROTECTION)

Supply of 11kv, single pole, single phase,outdoor type with ratio 500-400A/5-5A, 15 VA burden,PS class accuracy 0.5 Transformer CT for metering and differnetial protection. The CTs will be complete with bimetallic terminal for connecting ACSR wires, whe

Supply of 11kv, single pole, single phase,outdoor type with ratio 600-300A/1-1A, 15 VA burden,PS class accuracy 0.5 Neutral CT for protection. The CTs will be complete with bimetallic terminal for connecting ACSR wires, whe

Supply of 11kv, single pole, single phase,outdoor type with ratio 200-100/1A, 15 VA burden, class accuracy 0.5 Line CT for metering, The CTs will be complete with bimetallic terminal for connecting ACSR wires, whether proof secondary terminals,

POTENTIAL TRANSFORMER

Supply of outdoor, single pole Potential transformer with voltage ratio(11/√3 kV)/ (110V/√3), output 100 VA burden with class accuracy 0.5. The PT should be complete with bimetallic connectors for connecting it to overhead conduct0r

11 KV ISOLATOR

The isolator shall be suitable for a system voltage of 11 KV, rated current of 800 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITHOUT EARTH SWITCH

Isolator (3-phase) suitable for a system voltage of 11 KV, rated current of 800 A and fault withstand of 16 KA for 1 sec and shall be manual operated, single break type, triple pole, outdoor type,pole mounted suitable for horizontal mounting WITH EARTH SWITCH (for Line)

LIGHTNING ARRESTOR

9kV, 10 kA single pole, class 2, station type, heavy duty, Lightning Arrestor complete with suitable bimetallic connectors for ACSR wire connections, parallel groove clamps, weather proof secondary terminals, with-out counter, including all accessories.

Supply & fixing of 33 KV Pin/Post Insulators with Pin

Supply & fixing of 11 KV Pin/Post insulators with Pin

Supplying and Fixing Disc Insulators (Polymer) 70 KN BS type

Supply & fixing of Steel Fabricated items, additional requirement.

Control & Relay Panels

33 KV Control & Relay Panels

Indoor Relay and Control Panel (consisting of OC/EF numeric relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Feeders Incomer) Breakers

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Differential relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - for Transformers HV Incomer Breakers

11 KV Control & Relay Panels

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Differential relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Transformers LV incomer Breakers

Indoor Control and Relay Panel (consisting of OC/EF numeric relay, Voltmeter, Ammeter, MW Meter, KwH meter, pf Meter, Frequency Meter, indication lamp, Breaker Control Switch, Master trip relay, Annunciation Windows with Annunciation Relays, Push-Button for Alarm Accept/Reset/Lamp Test, Mimic Diagram, static TVM etc. The C/R Panel should be supplied with mandatory/recommended spares such as Control Switches, indicating lamps, HRC fuses etc. - For Outfoing Feeders and Bus Coupler Breakers.

OVERHEAD CONDUCTOR

PANTHER ACSR Conductor

40mm dia GI pipe

80mm dia GI pipe

Copper Control Cables

Supply of 5 C X 2.5 mm sq.

Supply of 10 C X 2.5 mm sq.

Supply of 12 C X 2.5 mm sq.

HT Power Cables

Supply of 33 KV 1 x C 400 sqmm XLPE Al.(for connecting Power Transformer Primary and from Incomer 33KV feeder to Bus)

Supply of 11 KV 1 x C 300 sqmm XLPE Al.(for Connecting Secondary of Power Transformer to 11KV Bus to Outgoing Feeder)

Supply of 11 KV 3C X185 sq. mm. XLPE Al. (For DT)

LT XLPE Armoured Aluminium Power Cable of following sizes, 1.1KV

PVC insulated AL armoured Power cables 2 xC, 25 sqmm

PVC insulated AL armoured Power 3½ xC, 35 sqmm

PVC insulated AL armoured Power 3½ x C, 70 sqmm

PVC insulated AL armoured Power 3.5C X 95 SQ.MM

PVC insulated AL armoured Power 3.5C X 120 SQ.MM

LT XLPE Unarmoured Copper Power Cable of following sizes, 1.1KV

PVC Insulated CU unarmoured Power cables1C x 25 SQ.MM.

PVC Insulated CU unarmoured Power cables1C x 70 SQ.MM.

Termination Kit

Supply of 33 KV Termination Kit for 1 C X 400 mm sq. XLPE cable( for connecting 33kV Auto recloser to Power Transformer Primary and for Incomer 33KV feeder to Bus)

Supply of 11 KV Termination Kit for 1 C X 630 mm sq. XLPE cable ( for Connecting Secondary of Power Transformer to 11kV Incomer Auto Reclosers and for Autorecloser to outgoing feeder - 4 outgoing 11KV Feeders).

Supply of 11 KV Termination Kit for 1 C X 185 mm sq. XLPE cable ( for DTs etc).

Earthing & Lightning Protection

Supply of 3.0 mtr 40mm dia GI Pipe Earthing

Supply of Copper Plate Earthing for Transformer Neutral (600x600x3.15)

Supply of Earthing Strip

75X6mm GI Strip

50X10mm GI Strip

50X6mm GI Strip

25X3mm GI Strip

50X6mm Copper Strip

Supply of CT & PT Jnc Box (12 way)

Lightining spike

Down conductor for Lightining spike (25x3mm GI Strip)

Control Room Auxiiaries

24V, 65AH, Lead Acid type Battery Set at 10 Hr Discharge Rate consisting of 11 Nos., each of 2.2V Cell having float level indicators, terminal connectors along with suitable wooden rack, required quantity of acid, distilled water & all other accessories and connectors required for installation, testing & commissioning as per technical specifications.

Transistorised Battery Charger Set with full wave rectification, 1-ph, 200/240V, 50Hz Input Voltage for charging 24V, 65AH Battery along with required cable, connectors etc. for conection with 24 V 64AH Battery Set & 220V AC Source and 24V DCDB

415 Volt LTAC Panel as per specification with 250A TPN MCCB as incomer ,2x 100A MCCB,2x32A TP ,5x16A TP, 4x16A DP,1x32A DP MCB.

24V DCDB as per TS & the Electrical Layout

Supply, of following Transformers

33/11KV, 2.5 MVA Oil Type Transformer

33/0.433KV, 25 KVA, oil type Station transformer

Civil Works

Cement Concrete footing

Cable trench

Antiweed treatment

Control room

Fencing

Site levelling

Approach road

Drainage

Description of Work / Item(s)

Amount

Taxes Applicable on Supply and Erection, Dismatling, Installation, Civil works & Commissioning of Materials

Total GST on Supply of Materials (BoQ1)

Total GST on Erection, Installation, Civil works & Commissioning (BoQ2)

Total Labour Cess on Erection, Installation, Civil works & Commissioning (BoQ2)

Description of Work / Item(s)

Amount

TOTAL SCHEDULE NO. 1

Ex-works supply of materials (BoQ1)

TOTAL SCHEDULE NO. 2

Erection, Installation & Commissioning (BoQ2)

TOTAL SCHEDULE NO. 3

Taxes (GST & Labour Cess) (BoQ3)

techno power enterprises private limited (BID ID -3027)

RAUSHEENA UDYOG LIMITED (BID ID -3031)

techno power enterprises private limited (BID ID -3027)

RAUSHEENA UDYOG LIMITED (BID ID -3031)

techno power enterprises private limited (BID ID -3027)

RAUSHEENA UDYOG LIMITED (BID ID -3031)

techno power enterprises private limited (BID ID -3027)

RAUSHEENA UDYOG LIMITED (BID ID -3031)