POLISHING PAINTING TO MISC FURNITURE RECANNING OF CHAIR REPAIR TO SOFA AND REPAIR TO GI CHARPOY UNDER GE MIS MHOW

Amount

(A) Removing old/unserviceable cane and M&L for re-canning of various chairs ( for ser no. 2 to 4) of MES F/DB/FD/MAP furniture items as applicable as per drgs and directed by EIC. B) Work will be executed in Md Accn / different User Units under AoR of GE(MIS) Mhow including BSO's Furniture Yard as directed by Engineer-in-Charge.

Chair Easy (FD-201/229/281)

(a) Removing old unserviceable cane from seat & back and M&L for recaning the seat and back in godrej pattern oval shape 2 mm wide new white plastic cane & 4 mm wide at the edge mark as approved by EIC/GE including taking out old canning complete all as shown in drawing.

(b) Shoes : M & L for removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Chair Writing (FD-202/280)

(a) Removing old unserviceable cane from seat & M&L for recaning the seat in godrej pattern oval shape 2 mm wide new white plastic cane & 4 mm wide at the edge mark as approved by EIC/GE including taking out old canning complete all as shown in drawing.

(b) Shoes : M & L for removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Chair Dining (FD-228/279)

(a) Removing old unserviceable cane from seat & M&L for recaning the seat in godrej pattern oval shape 2 mm wide new white plastic cane & 4 mm wide at the edge mark as approved by EIC/GE including taking out old canning complete all as shown in drawing.

(b) Shoes : M & L for removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Chair Writing Steel (FD/E6/MAP/10, FD/E6/MAP/10(R), FD/E6/MAP/12)

(a) Seat & Back:-Removing the existing old unserviceable seat and back & re-upholestering with new fabric containing material like Acrylic polyester, poly viscose, poly propylene of colour ( range not less than 300/RM) as approved by EIC/GE on PU foam of 50 mm thick and 50 density with PVC lipping all round fixed over 12 mm hot pressed BWR plywood all as specified in drawing.

(b) Arm Rest : Removing the existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by EIC/GE

(c) Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

(d) Taking out unserviceable/broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC

(e) Rubber Stopper : M & L for removing old/worn out rubber stopper and S & F new Rubber stopper of superior quality of suitable size complete all as specified and as directed.

Chair Steel Tubular with arms (FD-75(m))

(a) Taking out old damaged/decayed seat & back of chair CB steel with Arms and S&F new seats and back of shisham wood duly shaped and finished alround duly canned with 2mm wide and 0.4 mm thick half round and border with 3 mm wide plastic cane of half round in true Godrej pattern complete with two coats of required shade of paint over a coat of wood primer all as specified and shown on drg .

(b) Taking out old damaged/decayed Arms rest and S&F new Arm rest made of good quality wood complete all as per drg.

(c) Taking out old unserviceable shoe from its posn and S&F new top shoe best quality in the same position complete all as specified and directed.

(d) Taking out old unserviceable top cap from its posn and S&F new top cap best quality in the same position complete all as specified and directed.

(e) S&F flat iron 25mmx5mm and 50 cm long to steel frame below seat to support of wooden seat duly welded and painted to steel frame complete all as specified and directed.

(f) M&L for welding to damaged/decayed steel frames of chair CB Steel with Arms complete all as specified and directed.

(g) M&L for painting to steel frame of old painted surface by derusting/scrubbing/dusting/scraping & rubbing and applying one coat of synthetic enamel paint to MS tubular frame of chair steel tubular with arms

Chair Dining JCO/OR (FD/MAP/03 FD/MAP-II/05)

(a) PVC Seat : Taking down old U/s PVC Seat and M&L for New PVC seat 4 mm thick to fix seat with holes screwed with rails as directed by Engr-in-charge/GE

(b)Taking down old u/s leg and M&L for new leg made out of 1st class teak wood including shoes duly polished all as specified in drg and directed by Engr-in-Charge/GE

(c) Taking down old u/s Horizontal Back rest and M&L for new Horizontal Back rest made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge/GE

(d) Side Stiffener : Taking down old u/s Side Stiffeners and M&L for New Side Stiffener made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge/GE

(e) Centre Stiffener : Taking down old u/s Centre Stiffeners and M&L for New Centre Stiffener made out of 1st class teak wood all as specified in drg duly polished and as directed by Engr-in-Charge/GE

(f) Middle Stiffener : M&L for New Middle Stiffener made out of 1st class teak wood, beween side rails of chair duly polished all as directed by Engr-in-Charge/GE for extra support to PVC Seat.

g) Removing old u/s shoes and M& L for rubber Shoes best quality as drg

Removal of following existing unserviceable wooden furniture components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed in OTM / Md Accn / different User Units of GE(MIS) Mhow including BSO's Furniture Yard as directed by Engineer-in-Charge.

(a) Stainless Steel Fancy 1.5" Knob as approved by EIC/GE

(b) CP Handles 100 mm long for steel furniture as approved by EIC/GE

(c) Concealed Hinges 25 mm (Make: Ebco/Hettich) as approved by EIC

(d) Copper Oxidised steel Pegs as approved by EIC/GE

(e) Handle CP for Almirah (32 No) as approved by EIC/GE

(f) Lock for Almirah 6 levers (Make : LICO/Rina/Harrison/Link)

Sofa set 4/5 seater (FD-281/373/FD/MAP-II/02)

(a) Replacement of old/us Rear and Front legs and S & F new Rear and front legs made of 1st class teak wood duly polished all as specified and shown in drg.

(b) Replacement of old/us Arms and S & F new Arms made of 1st class teak wood duly polished all as specified and shown in drg.

(c) Replacement of old/us Front Rail and S & F new Front Rail made of 1st class teak wood duly polished all as specified and shown in drg.

(d) Replacement of old/us Bearer and Battens and S & F new Bearer and Battens made of 1st class teak wood duly polished all as specified and shown in drg.

(e) Replacement of old/us Back Strips and S & F new Back Strips made of 1st class teak wood duly polished all as specified and shown in drg.

(f) Replacement of unserviceable cushion for seat/back with new cushion PU Foam of sofa set 4/5 Seater comprising single piece of seat/back each made of foam 40D of size 21”X22”X100 mm Make: Sleep Well (Featherfoam)/ Kurlon(Gold)/Godrej duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends superior quality complete all as directed by GE and shown on drg no. Note : Rate of tapestry cloth shall not be less than Rs 300/-per RM and colour and texture of Tapestry shall be approved by GE.

(g) M& L for rubber Shoes best quality as drg

Minor Repair fixing /fitting of Chair Easy/Chair Writing/Chair Dining/Chair Dining JCO/OR & Sofa sets of loose/ dismantled/sagged furniture items including tightening the joints,pinning, screwing, nailing, wedging glueing etc as directed by EIC. (FD 201/202/228/229/279/280/281/373/FD/MAP/03/FD/MAP-II/02)

Sofa Single Seater Wood (TP)

(a) M&L for Complete seat & back made of 40 density PU foam (make-Godrej/Kurlon/Sleepwell "PRIMO") with 100 mm thick and upholstery of cloth of range not less than Rs. 300/mtr quality,colur and shade & quality approved by EIC/GE Rest all as per existing shape and size .

(b) Replacement of old/us Rear and Front legs and S & F new Rear and front legs made of 1st class teak wood duly polished all as specified and shown in drg.

(c) Replacement of old/us Arms and S & F new Arms made of 1st class teak wood duly polished all as specified and shown in drg.

(d) Replacement of old/us Front and Side Rail and S & F new Front and side Rail made of 1st class teak wood duly polished all as specified and shown in drg.

(e) Removing of old u/s shoes and M& L for rubber Shoes best quality as drg

Single seater sofa grade -II(Steel) (TP)

(a) Taking out old/unserviciable seat & back and supply & fixed new seat & back made of 9 mm thick plywood with fabric( range not less than 300/RM) and polyurethene foam 40 density complete rest all as shown on drawing.

(b) Removing of old u/s shoes and Supply and Fix Rubber buffer all as per drg

(c) M&L for painting to steel Tubular frame of old painted surface by derusting/scrubbing/dusting/scraping & rubbing and applying one coat of synthetic enamel paint to MS tubular frame

Chair grade II(Steel) (TP)

(a) Taking out old/unserviciable seat & back and supply & fixed new seat & back made of 9 mm thick plywood with best quality fabric( range not less than 300/RM) and polyurethene foam 50 mm thick 40 density complete all as shown on drawing.

(b) Arm Rest : Removing the existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by EIC/GE

(c) Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame

d) Removing old u/s PVC Shoes and M& L for rubber buffer best quality as drg

(e) Taking down unserviciable frame of chair and supply & fix new frame 25 mm dia round pipe with 1.6 mm thick duly black painted complete all as per drg and directed.

Office staff & Conference chairs (TP)

(a) Taking out old/unserviciable seat & back and supply & fixed new seat & back with best quality fabric( range not less than 300/RM) and polyurethene foam 75 mm thick 40 density complete all as shown on drawing and as directed

(b) Arm Rest : Removing the existing broken/ unserviceable Arm Rest from the chair and S&F new Arm Rest made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by EIC/GE

(c) Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair .

(d) Removing old u/s shoes and M& L for rubber buffer best quality as drg

(e) Taking down unserviciable frame of chair and supply & fix new frame 25 mm dia round pipe with 1.6 mm thick duly black painted complete all as per drg and directed.

Coffee table grade I(Wooden) (TP)

a) Removing old u/s glass and M& L for Replacement of 12 mm thick glass top with machine polish edges fitted on rubber all as per drawing

b)Removing old u/s glass and M& L for Replacement of 5 mm thick glass shelf with teakwood frame with polish complete all as per drawing

(c) Replacement of old/us Rear and Front legs and S & F new Rear and front legs made of 1st class teak wood duly polished all as specified and shown in drg.

(d) Removing old u/s rubber shoes and M& L for rubber shoes best quality as drg

TV Trolley (Wooden) (TP)

(a) Removing old u/s top and M& L for Prelaminataed MDF board Exterior Grade I, Top as per existing shape and size and as directed by EIC

(b) Removing old u/s legs and M& L for Ist class teak wood legs as per existing shape and size duly polished and as directed by EIC

(c) Removing old u/s shelves and M& L for Prelaminated MDF board Exterior Grade I Shelf as per existing shape and size duly polished and as directed by EIC

(d) Removing old u/s rails and M& L for Ist class teak wood Rails as per existing shape and size duly polished and as directed by EIC

(e) Removing old u/s Castors wheels and M & L for Castors Wheel as approved by EIC/GE

Bed Grade-II & III(Steel) (TP)

(a) Removing old u/s top and M&L for Plywood top 12 mm thick BWR Grade Conforming to IS-303(1989) (Make-Archidply/century ply/Greenply) as per existing shape and size complete including painting to all frame and as directed by EIC

(b) Removing old u/s PVC Shoes and M& L for new rubber shoes best quality as drg

Table Bed side Grade I & II(Wooden)(TP)

a) Replacement of old U/s top and S&F new 18 mm thick prelaminated MDF Board exterior grade (make-Century/green/Action tesa) with fevicol and nails all around the edges complete all as specified and shown in drawing .

b) Replacement of Old U/s legs support and S&F new leg made of 1st class teak wood with shoes all as specified and shown in drg.

c) Replacement of Old U/s short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

d) Replacement of Old U/s long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

e) Replacement of Old U/s Bottom support and S&F 18 mm thick prelaminated MDF Board exterior grade (make-Century/green/Action tesa) with fevicol and nails all around the edges all as specified and shown in drg.

f) Replacement of Old U/s Bracket support and S&F new Bracket of size 50X50X20 mm made of 1st class teak wood all as specified and directed by EIC/GE

Table Writing Grade II & III (Steel) (TP)

(a) Removing old u/s top and M&L for 18 mm Thick Prelaminated MDF Board Exterior Grade I(Make: Century/Greenply/Action Tesa) shall be provided on top of table complete all as per drawing

(b) Repairs to drawers include Tinkering/denting, painting, welding etc all as shown & as directed by EIC/GE

(c) Removing old PVC Shoes and M& L for rubber shoes best quality as drg

(d) Removing old u/s locks and S&F for new Lock for 6 levers (Make : LICO/Rina/Harrison/Link)

e)Removing old u/s glass and M& L for Replacement of 5 mm thick glass frame complete all as per drawing

Charpoy GI Pipe with plytop/HARD BED FOR JCO/OR (FD-220(R)/ CEJZ/SKD/413)

(a) Removing of unservicable long rail and Supply and Fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as specified in drg and directed by Engr-in-Charge.

(b) Removing of old unserviceable short rail and making of short rails from long rails obtained from item No. 20(a) and threading the both ends of short rails and fixing in position complete as specified in drg and directed by Engr-in-Charge.

( c ) Removing of old unserviceable legs and making of legs from short rails obtained from item No. 20(b) and threading the both ends of legs and fixing in position complete as specified in drg and directed by Engr-in-Charge.

(d)Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as specified in drg and directed by Engr-in-Charge.

(e) Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) complete all as specified in drg and directed by Engr-in-Charge.

(f) Replacement of old ply top and S & F New plywood top size 1980x900 mm , 12 mm thick BWR Grade ISI Marked Confirming to IS -303 ( Make Green Ply/Century/Archid) top including dismantling of old unserviciable top without disturbing the other parts, made to shape & size as shown on drawing, tightening of loose components and the edges of ply shall be covered with half round beading of Ist class teak wood of size 12mmx6mm thick all round duly polished with french polish of best quality complete all as specifed and directed. It also includes replacement of old nuts and bolts 75 mm long 5 mm dia semi circular top with nuts and two washers complete all as specified and directed.

(g) Replacement of old /unserviciable MS Square pipe and S&F new 25 mm MS Square hollow pipe(top level flush with top of gi pipe) along with fillet weld alaround both side 3 mm size with GI pipe and MS square hollow pipe with suitable counter sunk 6 X 75 long GI bolt and washer to fix plywood with pipe all as directed by Engr-in - charge/GE and as mentioned in drawing. Before fixing MS Square hollow pipe shall be painted two coats with synthetic enamel paint Black over a coat of red oxide primer complete all as specifed and directed.

Table centre two tier(Steel) (CWE/M/F/29/95)

a) Removing old u/s broken upper top and S&F new table upper Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with standerd PVC edging and headless nails all round the edges all as specified and directed by Engr-in-charge

b) Removing old u/s broken lower top and S&F new table lowerTop of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with standerd PVC edging and headless nails all round the edges all as specified and directed by Engr-in-charge

c) Removing of old u/s PVC rubber shoes and S&F new PVC shoes of superior quality all as specifed and as directed by Engr-in-Charge

Bed Hard OR (Steel) (CWE/M/F/05/07)

a) M&L for Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Archidply) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of made to shape & size as shown on drawings, with 9 nos shunken nut/bolts, appropriate holes shall be made with electric drill machine complete all as specified and directed by Engr-in-charge

b) Removing of old u/s PVC rubber shoes and S&F new PVC shoes of superior quality all as specifed and as directed by Engr-in-Charge

Chair cushioned with handle (CWE/M/F/10/02)

(a) Taking out old damaged/decayed seat & back of chair cushioned with handle and S&F new seats and back of 50 mm thick polyurethane foam fixed over 12 mm thick plywood back and back covers of vacumme formed 3 mm thick black ABS sheet with velvet cloth. back fixed in 25 mm MS tube and welded by 25X29X3 mm thick 100 mm high angle iron frame all as specified and as mentioned in drawing

(b)Taking out old damaged/decayed Arms rest and S&F new Arm rest made of good quality wood complete all as per drg.

(c) Taking out old unserviceable shoe from its posn and S&F new top shoe best quality in the same position complete all as specified and directed.

(d) S&F flat angle iron 25mmx5mm and 50 cm long to steel frame below seat and back to support of wooden seat and back duly welded and painted to steel frame complete all as specified and directed.

(e) M&L for welding to damaged/decayed steel frames of chair CB Steel with Arms complete all as specified and directed.

(f) M&L for painting to steel frame of old painted surface by derusting/scrubbing/dusting/scraping & rubbing and applying one coat of synthetic enamel paint to MS tubular frame of chair steel tubular with arms

Chair verandah JCO/OR/Officers (FD/MAP-II/15, FD/MAP-II/06)

a) Removing the existing unserviceable legs and S& F new Legs , each one piece made of MS conduit pipe 16G, 19mm dia including painting with two coats of synthetic white enamel paint over a coat of red oxide primer as per drg.

b) Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

c) Removing of old u/s PVC rubber shoes and S&F new PVC shoes of superior quality all as specifed and as directed by Engr-in-Charge

d) M&L for preparation of old painted iron & steel surfaces of chair verandah by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint(1st grade quality) over a coat of red oxide primer complete after preparation of surface all as specified and as directed by Engr-in Charge.

(e) Provision of Stiffner of size 12 mm square hollow pipe 18G x 16" with appropriate MS plate shall be welded below the seat of chairs for extra support to seat all as directed by EIC

f) Removing of old u/s PVC seat and S&F 4 mm thick new PVC sheet (Make:- Classic,Amko,cello,comfo/Harmony) of Chair Verandah complete all as shown on drawing and as directed by the Eng - in - Charge.

Shooter table w/shelf (TP)

a) Removing old u/s top and M & L for new top of suitable size of Prelaminated MDF board Exterior grade I as per existing shape and size complete and as directed by EIC

(b) Removing old u/s PVC Shoes and M& L for new rubber Shoes best quality as drg

c) M&L for preparation of old painted iron & steel surfaces of Shooter table by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint(1st grade quality) over a coat of red oxide primer complete after preparation of surface all as specified and as directed by Engr-in Charge.

Dressing Table incl stool (FD/E6/MAP/14)

(a) Replacement of old u/s Legs and S&F new legs made of Ist Class teak wood all as specified and shown in drawing

(b) Replacement of old u/s Short rails and S&F new short rails made of Ist class teak wood all as specified and shown in drawing.

(c) Replacement of old u/s long rails and S&F new long rails made of Ist class teak wood all as specified and shown in drawing

(d) Replacement of old u/s Seat and S&F new seat made of foam 40 Density Make: Sleepwell/Featherfoam/Kurlon (Gold) duly covered with tapestry cloth with fixed over 12 mm BWR Plywood (Make: Greenply/Archidply) ISI marked confirming to IS-303 complete all as specified and directed. Note: Rate of tapestry cloth shall not be less than Rs. 350/- per RM and colour and texture of Tapestry shall be approved by GE.

Chair Verandah : (FD-19,256,259 FD-359/)

a) Removing the existing unserviceable legs and S& F new Legs , each one piece made of MS conduit pipe 16G, 19mm dia including painting with two coats of synthetic white enamel paint over a coat of red oxide primer as per drg.

b) Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

c) Removing of old u/s PVC rubber shoes and S&F new PVC shoes of superior quality all as specifed and as directed by Engr-in-Charge

d) M&L for preparation of old painted iron & steel surfaces of chair verandah by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint(1st grade quality) over a coat of red oxide primer complete after preparation of surface all as specified and as directed by Engr-in Charge and Re- -canning of Chair Verandah with oval shape 4mm wide new plastic cane afterTaking down old unserviceable cane. Rest all as shown on drawing and as directed by the Engr-In- Charge.

Chair school with hand board (FD/E6/MAP/05)

(a) Removing old unserviceable seat/back of Chair and S&F one piece PVC Seat and back virgin quality as approved by GE all as specified and shown on drg.

(b) Removing old unserviceable hand board of Chair and S&F new hand board top openable fixed on right hand side made of 18/19 mm thick Prelaminated MDF Board exterior grade (make: Greenply/century/action tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with standard PVC edging/wooden edging as specified and shown on drg.

(c) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

(d) M & L for welding to broken steel frame of Chair School with Hand Board.

Table Dining Ors (FD-165(M))

(a) Removing old unserviceable top and S&F new table top of suitable size shall be made of 18 mm thick Prelaminated MDF Board exterior grade I type I (Make: Green/Century/Action Tesa) ISI marked confirming to IS-14857 one side with approved shade and one side white balancing white lamination with wooden beading of Ist class teak wood of size 18mmx6mm thick all round duly polished with french polish of best quality complete as specified and directed by Engr-in-charge

(b) M & L for welding to broken steel frame of table dining OR

(c) M&L for prepartation of old painted iron & steel surfaces of table dining Ors by scrapping & rubbing down with sand paper, removing dents & Scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint( Ist grade quality) over a coat of primer complete after preparation of surfaces all as specified and directed by Engr-in-charge.

M&L for polishing of one coat after rubbing/smoothening of surface with grinder machine wherever required or as directed by EIC/GE to acquire laquer finish to the following furniture articles all are of MES pattern viz F/DB/FD/MAPseries or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (MIS) Mhow including BSO's Furniture Yard as directed by EIC/GE

Bin Soiled linen (FD-15/70/212/244)

Book Shelf / Book Case (DB-4121/F-13/45/58/237/355)

Chair dining offrs (FD/MAP-II/04, FD/E6/MAP/10 FD/E6/MAP/10 ®/Grade I)

Chair dining/Chair dining JCO's / ORs (FD-228/279/ FD/MAP/03 FD/MAP-II/05)

Chair Easy (FD-201/229/281)

Chair writing (FD-202/280/Grade I)

Table Peg (FD-25/236/277/384 )

Side Board (FD-26/241/371/372)

Sofa set (5 seater)/Single seater wood (FD-281/373/ FD/MAP-II/02/Grade I)

Sofa Set (4 seater)(FD-281/373/ FD/MAP-II/02)

Table bed side (FD-28/210/248/ 276/Grade I/Grade II)

Table centre (FD-29/235/274 )

Table dining (6/8 pers) (FD-30/239 /273/376/1115/ FD/MAP-II/03/Grade I/Grade II)

Table writing (F-12/FD-33/275/ Grade I)

Table 3'x 2' with /without drawer (FD-41/42/55/223/224/283/284)

Table dressing ladies with mirror (FD-32/251/378/FD/MAP-II/07)

Teapoy (FD-232/278/34/382)

Table 900x900 (FD-88/291)

Table centre two tier(Steel) (CWE/M/F/29/95)

Coffee table grade I(Wooden) (TP)

TV Trolley (Wooden)(TP)

Table dressing gents with mirror(FD-31/230/379/FD/E6/MAP/18)

Stool Dressing (FD/E6/MAP/14)

Budget Furniture Industries (BID ID -3171686)

M/S JAI BALAJI TRADERS (BID ID -3173044)

SUNIL ENTERPRISE (BID ID -3173844)