Repair of two room H.S. Bhikkar Under P.R.I. Capex Budget.

Amount

Random Rubble masonry with hard in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like. a) Cement mortar 1:6:12 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

20mm cement plaster of mix. 1:6 (1 cement: 6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Providing and fixing strips in joints of terrzo / cement concrete floors. A) 40mm wide and 6mm thick (including all leads and lifts carriages of material by MT/HL)

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. a) 50mm thick with 20mm nominal size stone aggregate (including all leads and lifts carriages of material by MT/HL)

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 30% boulders (including all leads and lifts carriages of material by MT/HL)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 30mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. a) Second class deodar wood.

Providing and fixing fly proof wire gauze to windows and clerestory windows using wire gauze with av. Width of aperture 1.4mm in both direction all complete. a) With 2nd class teak wood beading 62x19mm.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm).

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel work.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63mm thick with zinc coating not less than 275 gram/m2.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 127.00 Km. by M.T.& 1.50 km. by H.L. b) Stone aggregate 40mm nominal size & above from Kathua for an average lead of 127.00 Km. by M.T.& 1.50 km. by H.L. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 127.00 Km. by M.T.& 1.50 km. by H.L. d) Stones/boulders from chiril nallah for an av. lead of 8.00 km. by M.T. .& 1.50 km. by H.L.

NAZIR AHMAD KHAN GOVT CONTRACTOR

DEEp KUMAR