GE/863/EWS-T-34 OF 2021-22

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of PCC block masonry built in any type of cement mortar incl all quoins ,arches, pillars etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m but n.exc 2 sq.m each complete all as specified and directed.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantaling water tanks and removing to store, capacity exc 500 but n. exc 1000 ltrs complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for grid size 605 x 605 mm complete all as specified and directed.

S&F for Anodised aluminium snap grid frame work size 605mm x 605mm for false ceiling complete all as specified and directed.

S&F for Non asbestos fibre cement building boards 10mm thick fixed or laid/ inserted in ceiling flat or sloping to timber/GI/Aluminium framework with screws complete all as specified and directed.

M & L for 25 mm thick Cement concrete type B0, 1:2:4 (using 12.50 mm graded stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed.

M & L for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 350 x 250 x 7 mm / 450x350x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Vitrified ceramic light shade coloured tiles 10mm thick square/rectungular, polished, area of each tile not exceeding 0.36 Sqm in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring for laying chequerd tiles complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, Set jointed and pointed neat cement slurry with grey cement & pigment laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M&L 75mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 using WPC 3% by weight of cement and finished surface even and smooth (without using extra cement) complete all as specified and directed. NOTE: - water proofing compound shall be measured and paid separately as 'supply only'.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 using WPC 3% by weight of cement and finished surface even and smooth (without using extra cement) complete all as specified and directed. NOTE: - water proofing compound shall be measured and paid separately as 'supply only'.

Supply only integral water proofing compound complete all as specified and directed

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed .

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed .

M & L for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed .

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified and directed .

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of steel surface complete all as specified and directed .

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed .

S&F in repair Brass chromium plated Tubular towel rail 20mm dia D type, 60 cm long between flanges complete all as specified and directed .

S&F in repair PTMT Towel Rail 600 mm long, fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S&F brass Hat and coat hooks, solid body 175mm to 250 mm complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surface of any description not otherwise described and exc 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

S&F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm complete all as specified and directed.

S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified and directed.

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S&F 6.3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm brass Ball valve complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S & F in repairs 20 mm bore fancy type Stop valves,cast copper alloy, chromimum plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S &F in repairs of brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed of bore dia 15 mm complete all as specified and directed.

S&F for PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Wash hand basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S & F in repair PTMT Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F PVC (SWR) floor trap , plain with grating including jointing with solvent cement, 75 mm dia complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith complete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of FRLS PVC insulated and unsheathed type alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC Box on top for fixing switches sockets etc. for one light point/ fan point controlled by one switch complete all as specified and directed.

All as per Srl item No 75 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.50 Sqmm.

All as per Srl item No 75 here-in-before but one 3 pin Socket outlet, 15 Amp, independent, with cable 2.50 Sqmm.

All as per Srl item No 75 here-in-before but one bell / buzzer point controlled by one push button on the same board with other switches or independent with cable 1.50 Sqmm

S&F of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

S&F of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

S&F of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

S&F of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

S&F of Bell push button, flush type, 5 Amp complete all as specified and directed.

S&F of Bell multi music type complete all as specified and directed.

S&F in replacement decorative ultra slim polycarbonate 22W LED lighting with high Lumen output, environmental friendly, energy efficient complete all as specified and directed.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement LED lamp 7W system lumen (NOM) 600 with all accessories complete all as specified and directed.

S&F in replacement bulk head light fitting LED type, 10 W with premium quality difuser for glarefree light complete all as specified and directed.

S&F in repair of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt with 200 Amps rated bus bar complete all as specified and directed.

S&F in repair MCB SPN 32 Amp with rupturing capacity 10 KA, 'C' curve complete all as specified and directed.

S&F in repair MCB SP 6 Amp to 32 Amp with rupturing capacity 10 KA, 'B' curve complete all as specified and directed.

M&L in repair submain wiring with mulitstranded copper conductor cable FRLS PVC insulated single core multistrand 1100 Volts grade 6 Sqmm 2 runs and one run 4 sqmm as earth wire all drawn through & incl PVC Casing & Caping of suitable size medium grade complete all as specified and directed.

M&L in repair cable under ground ,XLPE, PVC insulated & sheathed ( heavy duty ), Steel strip armoured , LT 1100 Volt grade with aluminium stranded conductor of size 16 Sqmm 2 core laid in trenches / in duct/ wall / floor complete all as specified and directed.

Excavation in trenches in hard / dense soil, not exceeding 1.5 mtr. Wide and not exc 1.5 mtr in depth, getting out for laying of cable/ foundation of pole etc. complete all as specified and directed.

Returning filling in excavated soil, including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm complete all as specified and directed.

Removing surplus soil / spoil to a distance not exceeding 50 metre away and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M & L for sand dry Locally available laid in trenches / ducts as in coushioning of cable complete all as specified and directed.

M & L for brick sub class 'B' , size 230mm x 115mm x 75mm and laid in trenches as in protection of UG cables complete all as specified and directed. .

M & L for GI tubing Light grade 50mm bore as in protection of UG cables complete all as specified and directed..

M&L for Earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire including taking out old earthing complete all as specified and directed.

M/S Shamsher Negi Dewa