REPAIR MAINT OF SUBMERSIBLE PUMP MOTORS CHLORONOME PLANTS AND SUPPLY OF CHLORINE AND ALLIED WORKS UNDER AGE EM AT GE FAIZABAD

Amount

S & F MCCB 4 pole 100 Amp, 415 volt, 25 kA Cat No: CM91712OOKOOG of make: L&T or equivalent in existing panel including taking out of old one all as specified and as directed

S & F On load Changeover 4 pole 100 Amp, 415 volt, open execution type Cat No: CO11000OOOO of make: L&T or equivalent in existing panel including taking out of old one all as specified and as directed

S & F digital type Voltmeter with LED display suitable for 3 phase with accuracy class 1 Cat No: WL132010OOOO of make: L&T or equivalent in existing panel including taking out of old one all as specified and as directed

M & L for 3 pole power contactor 415 volts with 70 Amp AC3 duty rating 2 NO + 2 NC of make: L&T, type ML-4, Cat No SS90910 or equivalent in Schneider/ Siemens in existing panel including taking out of old one all as specified and as directed

M & L for electronic timer for automatic star delta starter 415 volt 50 Hz 3 - 30 sec of make: L&T, type ST 100, Cat No ST80328OOOO in existing panel including taking out of old one all as specified and as directed

S & F digital type Ammeter with LED display suitable for 3 phase with accuracy class 1 Cat No: WL131010OOOO of make: L&T or equivalent in existing panel including taking out of old one all as specified and as directed

S & F tape wound ring type Current Transformer suitable for Bar primary of rating 50/5 Amp, burden 5 VA of make: Kappa/ Matrix or equivalent in existing panel including taking out of old one all as specified and as directed

S & F tape wound ring type Current Transformer suitable for Bar primary of rating 100/5 Amp, burden 5 VA of make: Kappa/ Matrix or equivalent in existing panel including taking out of old one all as specified and as directed

S & F Single phase Preventer Relay with adjustable time delay 30 sec to 5 min suitable for 415 volt AC, SPPR type, Cat No: XM81809OOOO of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel all as specified and as directed

S & F Three phase submersible pump controller with single phase preventer of rating 3 phase,415V,50 HZ, 30 HP , Type MU-G40 FASD, Cat no. CS90908LOGO of make L&T, Sceinider or equivalent including taking out of old one all as specified and as directed

S & F Three phase submersible pump controller with single phase preventer of rating 3 phase,415V,50 HZ, 40 HP ,Type MU-G40 FASD, Cat no. CS90908LOTO of make L&T, Sceinider or equivalent including taking out of old one all as specified and as directed

Supply only bleaching powder in 25 Kg bag (ISI marked) grade II all as specified and directed by Engr-In-Charge (Make : Punjab Alkalies/Modi Alkalies/Sriram as approved).

Supply only white crystal alum ferric of superior quality duly packed all as specified and directed

Supply only copper sulphate blue crystal of superior quality duly packed all as specified and directed

Supply only soda ash of superior quality all as specified and directed by Engr-In-Charge

Supply only sodium hypochloride liquid (chlorine content 10%) duly packed in sealed drum of make: M/s Declibac/ M/s Rayalshima Enterprise/ Bajaj Chemicals or equivalent all as specified and as directed.

Collection of water samples of bore wells located in different pockets of cantonment area in decontaminated sterilised bottles and testing of water samples for following essential parameters for drinking water as per IS:10500- 2012 from Govt Lab or NABL accredited laboratory: - (i) Colour (ii) odour (iii) taste (iv) pH value, (v) Turbidity (vi) TDS (vii) Total arsenic (viii) Silica (ix) Fluoride (x) Iron (xi) Magnesium (xii) Sulphate (xiii) Total Hardness (xiv) Total alkalinity (xv) Calcium (xvi) Conductivity (xvii) Chloride (xviii) Total Coliform and (xix) E Coli all as specified and as directed

Repair/ Maint of Bleaching Powder doser including replacement of unserviceable parts and thorough cleaning. [Note: All spares required for repair will be measured and paid under item no 21 to 30 of this schedule as 'Supply only']

Supply only Rubber bladder suitable for 105 litre Bleaching Powder Doser.

Supply only P.P. Funnel suitable for 105 litre Bleaching Powder Doser.

Supply only Orifice Plate suitable for 105 litre Bleaching Powder Doser

Supply only Drain Valve suitable for 105 litre Bleaching Powder Doser.

Supply only PVC pipe for Solution Dosing Line upto 3.0 m suitable for 105 litre Bleaching Powder Doser.

Supply only PVC Dose Control Valve suitable for 105 litre Bleaching Powder Doser.

Supply only Water Inlet Valve suitable for 105 litre Bleaching Powder Doser.

Supply only Solution Outlet Valve suitable for 105 litre Bleaching Powder Doser

Supply only Air release Valve suitable for 105 litre Bleaching Powder Doser.

Supply only Solution Feed Valve suitable for 105 litre Bleaching Powder Doser

Repair/ Maint of Chloronome plant including replacement of unserviceable parts and thorough cleaning. [Note: All spares required for repair will be measured and paid under item no 32 to 42 of this schedule as 'Supply only']

Supply only Rotor assembly with bearing brackets & tolerence ring for Chloronome plant. Part no.- PMBRPL2 of make: Declibac or equivalent

Supply only Single head feed rate control with shaft for Chloronome plant. Part no.- FC5040D of make: Declibac or equivalent

Supply only Pump head (including ferrules 1/4" & duckbill) for Chloronome plant. Part no.- UCPH7FD of make: Declibac or equivalent

Supply only Pump tube for Chloronome plant. Part no.- MCCP207 of make: Declibac or equivalent (pack of 5)

Supply only Injection check valve 3/8" for Chloronome plant. Part no.- MCINJ38 of make: Declibac or equivalent (pack of 5)

Supply only Weighted suction line strainer 3/8" for Chloronome plant . Part no.- ST138 of make: Declibac or equivalent

Supply only 3/8" white suction/discharge tubing for Chloronome plant. Part no.- MALT002 of make: Declibac or equivalent

Supply only Check valve duckbill only (PK-5) for Chloronome plant. Part no.- MCCVDBO of make: Declibac or equivalent (pack of 5)

Supply only Connecting nut 3/8" for Chloronome plant. Part no.- MANUT00 of make: Declibac or equivalent

Supply only Connecting nut 3/8" with adapter(PK-5) for Chloronome plant. Part no.- MCADPTR of make: Declibac or eqvlt (pack of 5)

Supply only Ferrule 1/4" (PK-24) for Chloronome plant. Part no.- MCAK200 of make: Declibac or equivalent (Pack of 24)

Chlorine ppm comparator test Kit with colour indicators having 0.1 to 2.0 PPM with Resolution 0.01 pH, make:Avon/ Aquasol or equivalent..

Supply of Liquid O-Tolidine solution in sealed bottle of 50 ml

Lifting of defective submersible pumping set up to 35 HP capacity from deep well 300mm housing along with connected accessories such as column pipe of 150mm dia appx 30 m submersible cable, steel pipe, spider, sleeve, line shaft, nut, bolts etc complete all as specified and directed by Engr-In-Charge. [Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/telephonically by JE E/M/AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor]

Transportation including loading & unloading of defective submersible pumping sets 3 phase any make and capacity 25 to 35 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engr-In-Charge. by Engr-in-charge.

Dismantling of defective submersible pumping set any make & model of capacity 25 HP to 35 HP, repairing the same including replacing old unserviceable parts and re-assembling and testing after repair complete all as specified and directed by Engr-In-Charge. [Note: (i) All the spares required for repair will be measured and paid seperately under item no 48 to 61 as supply only. (ii) Greasing of moving parts deemed to be included in the quoted rate]

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only stainless steel shaft with key for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Gun metal bush for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Stainless steel sleeve for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Sand Gaurd for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Impeller lock with key for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Neck ring (as per existing size and type) for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only turning & polishing of pump shaft (lathe work) for submersible pump capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Stainless steel thrust bearing for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only carbon plate for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only Gun metal bush for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only rubber bush for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only upper housing for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Supply only lower housing for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Turning , polishing of rotor & shaft (lathe work) for submersible motor of capacity 25 HP to 35 HP any make & model complete all as specified and directed by Engr-In-Charge

Rewinding with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete.

M&L for painting to pump set with two coat of synthetic enamel paint (grey colour) over a coat of red oxide primer after preparation of surface complete all as specified and directed by Engr-In-Charge.

Lowering, connecting, commissioning testing of repaired submersible set any make and capacity 25 HP to 35 HP 3 phase 415V into bore well 300/200mm with connected items such as column pipe approx 40 RM, properly connecting submersible cable etc complete all as specified and directed by Engr-In-Charge by Engineer-in-Charge. [Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/ telephonically by JE E/M/ AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor].

Complete servicing of Fire fighting pump set any make & model of capacity 60 HP including replacement of minor spares and testing after servicing complete all as specified and directed by Engr-In-Charge. [Note: (i) Greasing of moving parts deemed to be included in the quoted rate (ii) All type of T&P main switch ,electric multi meter/ tong tester for fault detecting , etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

M & L for Hose box made of 18 gauge MS Sheet with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside for yard hydrant (suitable for housing 2 Nos Hose reel drum for 36 m long hose of size not less than 800 mm X 600 mm X 250 mm including taking out of old one complete all as specified and as directed.

S & F Hose reel drum with hose pipe 36 m long including male/ female brass coupling for fixing with fire hydrant valves including taking out of old one complete all as specified and as directed.

S & F Branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet, 15 mm bore nozzle short including taking out of old one complete all as specified and as directed.

Flat three core submersible cable PVC insulated and sheathed multistranded copper conductor of cross sectional area 16 sqmm of make: Havells/ Polycab or equivalent

Material and Labour for Mild Steel ERW (Electro Resistance Welded) pipe with flanged ends suitable for Column Pipe of bore dia 150mm ncluding taking out of old pipes all as specified and directed by EIC including taking out of old one. [Note: The pipes should be in 3.0 mtr length with both side flanged suitable for column pipe for Bore well]

Supply only rubber packing 6mm thick consisting of 8/6" holes for 100mm to 150 mm dia column pipe complete all as specified and directed by Engr-In-Charge.

Complete servicing of suction sweeper comprising 600mm long MS/ CI fabricated suction head with PVC wheels, spring loaded brush and fiber squeezer including trolley mounted electric driven non clog self priming type centrifugal pumping set with 02 HP Motor 03 phase , 415 V electric driven DOL Push button starter along with repair to minor defects such as repair/ replacement to electric contact, kit-kat fuse, pumping set gland rope, coupling nuts & bolts, bush/ thrust bearing of existing size , push button, contactor block & relay of starter ,oiling/ greasing and testing etc complete including painting with two coat of synthetic enamel paint -of existing colour after removal of old paint / cleaning to rusted/ corrosive portion - 04 Sets [Note:- (i) All type of T&P main switch ,electric multi meter/ tong tester for fault detecting , etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate. (ii) Supply of major items required for repair/replacement shall be measured and paid separately under relevant item of this schedule as 'supply only']

Supply only Nylon-rope of 14-20mm size for suction sweeper.

Supply only Spire Brush suitable for cleaning of swimming pool.

S & F PVC wheel with bush and nut bolt set of 04 nos suitable for suction sweeper machine all as specified and directed by Engr-In-Charge

Rewinding of 2 HP motor 3 phase 415 volt 50 Hz AC

Supply and fixing PVC Floats suitable for Swimming pool including taking out of old one

Periodical maintenance including complete servicing of Diesel Engine Generator set of 160 KVA capacity at Military Hospital of make: Kirloskar or any other make and connected accessories including replacement of oil /lubricant filter to keep the plant in running condition including routine maintenance complete all as specified and as directed. [Note: (i) The Contractor need to get the job done through authorised service centre/ agency of Kirloskar Oil Engine Ltd or any other OEM (Original Equipment Manufacturer) located near Faizabad. The cost thereof deemed to be included in the quoted rate. (ii) All Spare parts for routine maintenence will be measured and paid seperately under relevent items of this schedule as 'Supply Only' (iii) Labour charges for routine maintenance including properly dismantling of old parts deemed to be included in the quoted rate]

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 2

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 3

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 4

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 5

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 7

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 8

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 9

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 10

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 11

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 12

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at STP Kandahar Line

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at STP Himachal niwas.

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Signal Centre

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Amn Dump

All as per item Ser No 79 here-in-before but of Trolly Mounted Diesel Engine Generator Set of 62.5/ 63 kVA capacity at Pump House No 1

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 40 kVA capacity at Records

All as per item Ser No 79 here-in-before but of Diesel Engine Generator Set of 15 kVA capacity at Stn HQ

Supply only Lubricant oil filter for DG set 160 KVA

Supply only Fuel filter (Pre) for DG set 160 KVA .

Supply only Fuel filter (Micro) for DG set 160 KVA

Supply only Air filter for DG set 160 KVA

Supply only Lubricant oil filter for DG set 62.5/ 63 KVA

Supply only Fuel filter (Pre) for DG set 62.5/ 63 KVA

Supply only Fuel filter (Micro) for DG set 62.5/ 63 KVA

Supply only Air filter for DG set 62.5/ 63 KVA

Supply only Lubricant oil filter for DG set 40 KVA .

Supply only Fuel filter (Pre) for DG set 40 KVA

Supply only Fuel filter (Micro) for DG set 40 KVA

Supply only Air filter for DG set 40 KVA

Supply only Lubricant oil filter for DG set 15 KVA

Supply only Fuel filter for DG set 15 KVA

Supply only Air filter for DG set 15 KVA of make

Supply only Coolant for DG Set

Supply only lead acid battery 12 volt 160 Ah including initial charge of make: Exide or equivalent complete all as directed by Engr-In-Charge

Material and labour for Automatic Voltage Regulator for DG Set of capacity 15 to 62.5/ 63 kVA make: Kirloskar or equivalent including taking out of old one.

Material and labour for Calibration of Fuel Injection Pump including properly dismantling and transporting to service center/workshop for over hauling/ calibration and refixing on DG Set after calibration for DG Sets of capacity 160 kVA including taking out of old one.

All as per item Ser No 65 above but for DG Sets of capacity 62.5/ 63 kVA

All as per item Ser No 65 above but for DG Sets of capacity 40 kVA

All as per item Ser No 65 above but for DG Sets of capacity 15 kVA

Material and labour for Turbo charger with all accessories suitable for DG set of capacity 62.5/ 63/ 40 KVA complete all as directed by Engr-In-Charge Make - Kirloskar or equivalent including taking out of old one.

Digital Tachometer, non contact type with range 5 to 99999 RPM with measuring time 0.8 sec (Over 60 rpm) and in-built memory for Max Value, Min Value and Last Value, accuracy class 0.5 with LCD display of make: Mextech/ CE or equivalent

Digital Frequency meter suitable for operation at 415 volt with 4 digit display accuracy class 0.5 with range 40 to 400 Hz with LED display of make: Yokins/ CE or equivalent

Material and labour for Banjo Bolt M 14 x 1.5 including taking out of old one.

Material and labour for Flexible fuel pipe type 7.5 14 x 14 B 700 PB of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Expansion bellow suitable for 15 kVA DG Set of make: Kirloskar including taking out of old one.

Material and labour for Starter Ring suitable for 15 kVA DG Set of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Starter Ring suitable for 62.5 kVA DG Set of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Fuel Pump mounted STOP solenoid switch suitable for 15 kVA DG set of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Fuel Pump mounted STOP solenoid switch suitable for 62.5 kVA DG set of make: Kirloskar or equivalent including taking out of old one

Material and labour for Fan Belt suitable for 62.5 kVA DG set of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Carefully dismantling the radiator and transporting to workshop, repair of all leakage, cleaning and transporting back and refitting in original position and testing after completion for DG set of capacity 160 kVA all as specified and as directed including taking out of old one

All as per item Ser No 130 above but for DG Sets of capacity 62.5/ 63 kVA

Material and labour for Self starter 12 volt DC operated suitable for DG set of capacity 62.5/ 63 kVA of make: Kirloskar or equivalent including taking out of old one

Material and labour for Self starter 12 volt DC operated suitable for DG set of capacity 160 kVA of make: Kirloskar or equivalent including taking out of old one.

Material and labour for Carefully dismantling the self starter and transporting to workshop, rewinding of armature and field coils and transporting back and refitting in original position and testing after completion for DG set of capacity 62.5/ 63 kVA all as specified and as directed including taking out of old one.

M&L for rectification of leakage from GI Pipe line of 80mm bore joints including excavation, returning and filling etc incl fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed.

M&L for rectification of leakage from GI Pipe line of 50mm bore joints including excavation, returning and filling etc incl fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed.

M&L for rectification of leakage from GI Pipe line of 40mm bore joints including excavation, returning and filling etc incl fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed.

M&L for rectification of leakage from GI Pipe line of 25mm bore joints including excavation, returning and filling etc incl fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed.

M&L for rectification of leakage from GI Pipe line of 20mm bore joints including excavation, returning and filling etc incl fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed.

S&F gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of 20mm bore.

S&F gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of 25mm bore.

S&F gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of 40mm bore.

S&F gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of 50mm bore.

Taking out unserviceable sluice valve/ butterfly valve from water mains of 80mm bore.

Taking out unserviceable sluice valve/ butterfly valve from water mains of 100mm bore.

Taking out unserviceable sluice valve/ butterfly valve from water mains of 150mm bore.

S&F connection & testing sluice valve 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts and gasket etc for fixing complete all as specified and directed of 80mm bore. [Note: For sluice valves fixed with pillars of over head tank, breaking of RCC/lead/ flange joints and repairing the same after fixing of valve deemed to be included in the quoted rates]

All as per item no. 147 but of 100mm bore.

All as per item no. 147 but of 150mm bore.

All as per item Ser No 147 here-in-before but Butterfly valve of size 150 mm

M&L for rectification of leakage from CI Pipe line of joints incl excavation in mud/soil and coucking with pig lead , returning filling complete all as directed of 150mm bore.

M&L for rectification of leakage from CI Pipe line of joints incl excavation in mud/soil and coucking with pig lead , returning filling complete all as directed of 100mm bore.

M&L for rectification of leakage from CI Pipe line of joints incl excavation in mud/soil and coucking with pig lead , returning filling complete all as directed of 80mm bore.

Taking up cement pipe/ CI water mains (including all fittings ) of 100mm bore. (Note - Excavation& earth work shall be measured and paid seperately)

Taking up cement pipe/ CI water mains (including all fittings ) of 150mm bore. (Note - Excavation& earth work shall be measured and paid seperately)

Supplying & laying of 100mm nominal bore ductile iron pipes class K-9 'ISI marked' in any length laid in trenches of the following sizes all as specified and directed by EIC. (Note - Excavation, earth work and joint shall be measured and paid seperately).

Supplying & laying of 150mm nominal bore ductile iron pipes class K-9 'ISI marked' in any length laid in trenches of the following sizes all as specified and directed by EIC. (Note - Excavation, earth work and joint shall be measured and paid seperately).

M&L DI fittings for flanged/ Spigot socket pipes bends (any type,radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc)Tee,pieces, single branch "Y" juction double ,cross (all sockets or socket and spigot) collar,caps and plugs up to 150 mm bore complete all as specified and directed by Engr-in-charge. (Note - Excavation and earth work shall be measured and paid seperatly).

Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying / taking out water supply pipe line in soft/loose soil, taking out excavated material,forming bottom etc complete all as specified and directed..

Returning filling in including,spreading ,levelling watering and well ramming in layer in n.exc 25 cm in soft/lose soil all as specified directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point as in soft/loose soil complete all as specified and directed.

Aey Key Enterprises

sethi tradres

M/S AVADH ENTERPRISES