Restoration of SIDBI Apartments at Panchkula

ABSTRACT OF COST

S.N. DESCRIPTION OF ITEM DSR AMOUNT (IN LACS) MR AMOUNT (IN LACS)

1 EXTERIOR SITE WORK 1,02,95,745.14 62,34,105.05

2 BHK Civil, Electrical, Plumbing works including Solar

2 Panels, Lifts, SS Railings, Flooring of common lobby area, 3,90,99,071.31 2,05,07,338.47

Waterproofing of Terrace area

3 BHK Civil, Electrical, Plumbing works including Solar

3 Panels, Lifts, SS Railings, Flooring of common lobby area, 1,93,88,453.14 92,88,102.70

Waterproofing of Terrace area

6 FIRE FIGHTING WORK 84,60,079.55 0.00

8 RAIN WATER HARVESTING 15,21,000.00

7 MULTIPLYING FACTOR FOR 18 % GST 1.0633

8 Total Rs including 18 % GST 90452645.14 3,83,04,971.29

10 GRAND TOTAL Rs with GST 135089301.59

10 GRAND TOTAL Rs with GST 135089301.59

Digitally signed by SANJAY

Sl No DSR No Description of Item Location Unit Quantity DSR rate Amount(Rs) Market Rate Amount(Rs)

Sub-Head : Site works

Demolishing brick work manually/ by mechanical means including stacking of

1 15.7 serviceable material and disposal of unserviceable material within 50 metres lead West side boundary wall

as per direction of Engineer-in-charge..

15.7.4 In cement mortar (One side Boundary wall) Cum 62.55 1,698.45 1,06,238.05

Dismantling old plaster or skirting raking out joints and cleaning the surface for

2 15.56 Boundary Wall plaster Both Side Sqm 768.30 45.05 34,611.92

plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing R.C.C. work by mechanical means and stockpiling at designated

locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking Plinth, top beam of sagged

serviceable and unserviceable material separately including cutting reinforcement Bounday wall

Demolishing cement concrete manually/ by mechanical means including disposal

4 15.2 CC flooring of the campus 0.00

of material within 50 metres lead as per direction of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 850.00 2,007.10 17,06,035.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 50.00 93.40 4,670.00

Dismantling stone slab flooring laid in cement mortar including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling asbestos cement pressure pipes including excavation and refilling

Sewage and Waste Water Drain

7 15.47 trenches after taking out the pipes manually/ by mechanical means and stacking

the pipes within 50 metres lead as per direction of Engineer-in-charge :

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

Excavating trenches of required width for pipes, cables, etc including excavation

for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer by

ramming, watering, etc. and disposing of surplus excavated soil as directed, within

a lead of 50 m :

2.10.1 All kinds of soil

2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm metre 195.00 651.55 1,27,052.25

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on

plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including

getting out the excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50

2.8.1 All kinds of soil cum 120.00 286.85 34,422.00

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

11 2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each cum 100.00 253.95 25,395.00

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extention of Bounday wall+ new

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

12 6.4 boundary wall+other

7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

mislaneous works

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 75.20 8,512.10 6,40,109.92

Providing and laying factory made chamfered edge Cement Concrete paver

blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required

strength, thickness & size/ shape, made by table vibratory method using PU mould,

laid in required colour & pattern over 50mm thick compacted bed of sand,

13 16.91.2 compacting and proper embedding/laying of inter locking paver blocks into the Along the existing CC Road

sand bedding layer through vibratory compaction by using plate vibrator, filling the

joints with sand and cutting of paver blocks as per required size and pattern,

finishing and sweeping extra sand. complete all asper direction of Engineer-in-

80 mm thick C.C. paver block of M-30 grade with approved colour design and

Digitally signed by SANJAY

Providing and laying at or near ground level factory made kerb stone of M-25

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints

with or without grooves (thickness of joints except at sharp curve shall not to more

At the sides of paver blocks

14 16.69 than 5mm), including making drainage opening wherever required complete etc. Cum 4.00 8,613.55 34,454.20

along the boundary wall

as per direction of Engineer-in-charge (length of finished kerb edging shall be

measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

Providing and laying at or near ground level factory made kerb stone of M-25

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints

with or without grooves (thickness of joints except at sharp curve shall not to more

1 16.69 than 5mm), including making drainage opening wherever required complete etc. Cum 15.00 8,613.55 1,29,203.25

as per direction of Engineer-in-charge (length of finished kerb edging shall be

measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

15 16.3 Supplying and stacking at site.

Supplying and stacking of well decayed cattle manure at site including

16 2.26 royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in CUM 164 247.5 40,590.00

stacks will reduced by 8% for Payment).

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry

palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in

full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the

officer-in-charge.

Providing and stacking winter seasonal seedlings/cuttings at site of work well

18 10.1 developed and healthy free from disease in per tray and each tray having 100 Nos

plants as per direction of the officer-in-charge.

10.1.22 Nasturtium Each 70 500 35,000.00

SITC for Bollards: LED150, Warm White, PSU 220-240V

SITC for Light poles with fixtures : Light fixture IP65 post top lantern with symmetric

MR light distribution and limited upward with suitable mounting pole - 3 m High , rust No 25.00 20,000.00 5,00,000.00

resistant, stainless steel complete

MR SITC for Landscape/ tree uplighter: Description: Led,12-Watt COB Garden Spike No 15.00 1,700.00 25,500.00

MR Supply and installation of Wall Uplighter for highlighting the External Boundary wall No 15.00 2,200.00 33,000.00

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10

metrenheight, backing filled with a grout of average 12 mm thick cement mortar

1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1

white cement : 2 stone dust) with an admixture of pigment matching the stone

shade :(To be secured to the backing and the sides by means of cramps and pins

shall be paid for separately) :

Red sand stone - exposed face fine dressed with rough backing.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Tiles in UG Water Tank+ Fire

Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Fighting tank

sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints

with white cement and matching pigments etc., complete.

Digitally signed by SANJAY

Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement,

water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels

/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts

integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts

integral crystalline slurry : 1 part water) for horizontal surfaces and applying the

same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by

reducing permeability of concrete by more than 90% compared with control

concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative

side. The crystalline slurry shall be capable of self-healing of cracks up to a width of

0.50mm. The work shall be carried out all complete as per specification and the

direction of the engineer-in-charge. The product performance shall carry

guarantee for 10 years against any leakage.

22.23.1 For vertical surface two coats @ 0.70 kg per sqm sqm 150.00 406.25 60,937.50

22.23.2 For horizontal surface one coat @1.10 kg per sqm. sqm 50.00 311.05 15,552.50

Providing and laying flamed finish Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

5 11.55 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with Steps & common area

cement slurry and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or

6 MR SITC of Advnace light arrestor with foundation and all required items needed Nos. 2.00 2,200.00 4,400.00

Cleaning of drinking water Ug Tank along with Fire fighting tank with non harardous

chemicals and biocleners

8 MR One time repair of existing motors, pipes in water, drain, fire system Quotation 1job 1.00 2,00,000.00 2,00,000.00

9 MR Shifting of DG set, Reassembling , repair and Testing of existing Dg set Quotation 1job 1.00 2,00,000.00 2,00,000.00

10 MR SHIFTING OF DG SYSTEM INCLUDING CABLES AND PANEL COST Quotation 1job 1.00 2,00,000.00 2,00,000.00

11 MR SHIFTING OF ELECTRICITY METERS Quotation 1job 1.00 5,00,000.00 5,00,000.00

Supply,installation, testing and commitioning of Water Softener system for both

13 MR NEW MAIN GATES (SS or in MS) for old gate and new gate proposed 2 Gates kg 700.00 841.48 5,89,038.51

14 MR Boom Barrier

Boom Length in 2.75 mtr. LED Type Boom, LED Connectivity

Options., Automatic Barrier Feature:

Barriers Hydraulic barrier (Right /Left Version)with boom

Opening/ Closing Time – 4-5 Sec. Fully.

Automatic with use cycles 100% with push button, Four J

hooks, Foundation plate. Round Boom. Push Button.

BARRIER MODEL 630 STD

Power supply (Vac / Hz) 230 {+6%/ -10%} / 50

Absorbed power (W) 220

Absorbed current (A) 1

Type of oil FAAC HP OIL

Oil quantity (Lt) ~ 1.8 , Barrier weight – 73 Kg

Winding heat protection (°C) 120

Anti-crushing system standard by-pass valves

Type of slow-down Electronic

Operating ambient temperature (°C) -20 / +55

Hood protective treatment Catachresis AISI 316 L

Protection class IP 44

Body Dimensions 390,290, 200,94

Photocell (Safety Beam Sensor) nos 2.00 2,63,813.72 5,27,627.45

SITC of above items

Supply and instalation of SIDBI Logo of appropriate size as per architect/ engineer

in charge over the top of Fascade visi

Digitally signed by SANJAY

Providing and fixing double scaffolding system (cup lock type) on the exterior side

of building/structure, up to 25 metre height, above ground level, including

additional rows of scaffolding in stepped manner as per requirement of site, made

with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical

tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps

and staircase system in the scaffolding for working platform etc. and maintaining it

in a serviceable condition for execution of work of cleaning and/ or pointing and/

or applying chemical and removing it thereafter.

The scaffolding system shall be stiffened with bracings, runners, connecting with the

building etc, wherever required, if feasible, for inspection of work at required

locations with essential safety features for the workmen etc., complete as per

directions and approval of Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be measured for payment

(2) The payment will be made once only for execution of all items for such works. Sqm 450.00 285.00 1,28,250.00

Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven percussion

type or of approved make including tapering of all edges, making square

shoulders of cavities including cleaning the exposed concrete surface and

reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all

complete as per direction of Engineer-In-Charge

26.28.2 50mm average thickness Sqm 3,600.00 211.55 7,61,580.00

Providing and injecting approved grout in proportion recommended by the

manufacturer into cracks/honey-comb area of concrete/ masonry by suitable

2 26.35 gun/pump at required pressure including cutting of nipples after curing etc.

complete as per directions of Engineer-in- Charge. (The payment shall be made on

the basis of actual weight of approved grout injected.)

26.35.3 Epoxy injection grout in concrete/RCC work of approved make KG 1,000.00 793.25 7,93,250.00

Providing, erecting, maintaining and removing temporary protective screens made

3 26.36 out of specified fabric with all necessary fixing arrangement to ensure that it

remains in position for the work duration as required by the Engineer-in-charge.

Cleaning of exposed concrete surface of sticking material including loose and

4 26.37 foreign material by sand blasting with coarse sand followedby and including sqm 500.00 370.15 1,85,075.00

cleaning with oil free air blast as per direction of Engineer in charge.

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design

mix concrete having the specified minimum characteristic compressive strength

[with ordinary portland cement, coarse sand and graded stone aggregate of 10

mm maximum size in proportion as per design criteria] including the cost of

centering and shuttering at edges and corners etc. as directed by Engineerin-

Charge Note: Rates shall include the providing necessary ground wires etc.

The levelling gauges, if used, shall be paid for separately. Payment

under this item shall be made only after proper wet curing has been done and

surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal

26.38.2 50mm thick in Grade M 25 with cement content not less than 330 kg per cum sqm 417.00 1,073.45 4,47,628.65

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb

area and along crack line including drilling of holes of required diametre (20mm to

30mm) up to depth from 30mm to 80mm at required spacing and making the hole

& crack dust free by blowing compressed air, sealing the distance between

injection nipple with adhesive chemical of approved make and allow it to cure

complete as per direction of Engineer-In-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm

mesh or other suitable size wire mesh to be fixed & firmly anchored

7 26.40 to the concrete surface by means of "L" shaped mild steel shear key welded with sqm 417.00 820.80 3,42,273.60

existing reinforcement including the cost of materials, labour, tool & plants as

approved by Engineer-in-charge.

Digitally signed by SANJAY

Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom

and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside

cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1

cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and

making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating coat of neat

cement, all complete as per standard design :

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)

560 mm internal diameter conforming to I.S. 12592, total weight of cover and

frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering,

shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 15.00 11,886.45 1,78,296.75

11 19.9.1.2 With Sewer bricks conforming to IS : 4885 each 20.00 11,666.90 2,33,338.00

Preparation of complete set of shop drawings including finishing, MEP services,

details, design calcualtions etc. and any other details as and when desired by

Engineer In charge /client. A qualified professsional for the purpose shall be

appointed after due appproval from Engineer In Charge.

Repair and maintenance of mislaneous items on site unearthed during the

restoration and revitalization process.

Digitally signed by SANJAY

SUMMARY OF 2 BHK Block (28 Flats) Works

DESCRIPTION OF ITEM DSR AMOUNT NSDR AMOUNT REMARKS

2 ELECTRICAL WORKS 5892449.00 3507627.58

3 PLUMBING WORKS 1415254.31 91009.26

INCLUDING SOLAR PANELS,

LIFTS, SS RAILINGS,

GRAND TOTOL FOR 28 FLATS 2 BHK 59606409.78 FLOORING OF COMMON

WATERPROOFING OF

PER 2 BHK FLAT COST 2128800.35

SUMMARY OF 3 BHK Block (8 Flats) Works

DESCRIPTION OF ITEM DSR AMOUNT NSDR AMOUNT REMARKS

2 ELECTRICAL WORKS 3127663.00 1763338.34

3 PLUMBING WORKS 661843.14 91014.43

INCLUDING SOLAR PANELS,

GRAND TOTOL FOR 8 FLATS 3 BHK 28676555.84 LIFTS, SS RAILINGS,

FLOORING OF COMMON

WATERPROOFING OF

PER 3 BHK FLAT COST 3584569.48

Sl No DSR No Description of Item Unit Quantity DSR Rate (Rs) Amount(Rs) MarketRate (Rs) Amount(Rs)

Demolishing brick work manually/ by mechanical means including

1 15.7 stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge..

15.7.4 In cement mortar opening kitchen wall Cum 40.57 1,698.45 68,910.00

Dismantling doors, windows and clerestory windows (steel or wood)

2 15.12 shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below No. 252.00 302.70 76,280.00

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead

3 15.23.1 15.23.1 For thickness of tiles 10 mm to 25 mm 1680 60.50 1,01,640.00

Dismantling old plaster or skirting raking out joints and cleaning the

4 15.56 surface for plaster including disposal of rubbish to the dumping ground Sqm 3,438.00 45.05 1,54,882.00

within 50 metres lead.

Dismantling of cement concrete platform along with curtain walls and

5 15.55 base concrete etc. including stacking of useful materials near the site

and disposal of unserviceable materials within 50 metres lead :

Removing dry or oil bound distemper, water proofing cement paint

6 13.91 and the like by scrapping, sand papering and preparing the surface Sqm 6,050.00 20.85 1,26,143.00

smooth including necessary repairs to scratches etc. complete.

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead

7 15.45 caulked joints, melting of lead and making into blocks including

stacking of pipes & lead at site within 50 metre lead as per direction of

Engineer-in-charge:

Dismantling asbestos cement pressure pipes including excavation and

refilling trenches after taking out the pipes manually/ by mechanical

means and stacking the pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China)

9 15.52 including stacking of useful materials near the site and disposal of No. 56.00 744.60 41,698.00

unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading,

10 15.60 transporting, unloading to approved municipal dumping ground or as Cum 1,000.00 219.35 2,19,350.00

approved by Engineer-in-charge, beyond 50 m initial lead, for all leads

including all lifts involved.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating

coat of neat cement.(External)

Extra for plastering exterior walls of height more than 10 m from ground

level for every additional height of 3 m or part thereof.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5

sq.meters and under, including cutting the patch in proper shape,

14 14.1 raking out joints and preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge

With cement mortar 1:4 (1cement: 4 coarse sand)with chiken mesh/

Digitally signed by SANJAY

Extra for providing and mixing water proofing material in cement

plaster work in proportion recommended by the manufacturers.

Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than

0.08%and conforming to IS : 15622 , of approved make, in all colours

15 11.41 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including

grouting the joints with white cement and matching pigments etc.,

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300

mm or more (thickness to be specified by the manufacturer), of 1st

quality conforming to IS : 15622, of approved make, in all colours,

16 11.40 shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm Sqm 252.00 1,225.10 3,08,725.00

thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3kg/sqm including pointing the joints with white

cement and matching pigments etc., complete.

13.6 20 mm cement plaster of mix :

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg /sqm mixed with water proofing cement

compound @ 0.253 kg/sqm. This

17 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of slurry of SQM 252 516.6 1,30,183.00

cement @ 0.242 kg/ sqm mixed with water proofing cement

compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4

hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and

compacting Foam Concrete for raising level of toilets and pantry and

18 finishing in a coat of lean concrete screeding with waterproofing CUM 75.6 5,524.91 4,17,683.00

compound complete in all respects to take Tile Flooring as per flooring

specifications.

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels

8.2.2 Granite stone slab colour black, Cherry/Ruby red Sqm 112.00 4,425.35 4,95,639.00

Providing edge moulding to 18 mm thick marble stone counters,

21 8.3 Vanitiesetc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work metre meter 112.00 418.85 46,911.00

Digitally signed by SANJAY

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with

white cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

Three track three panels sliding window with fly proof SS wire mesh (Two

nos. glazed & one no. wire mesh panels) made of (small series) frame

23 9.147D.2 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 Sqm 336.00 10,030.30 33,70,181.00

mm and single glazing bead of appropriate dimension (Area of

window up to 1.75 sqm).

Casement window single panel with S.S. friction hinges (300 x 19 x 1.9

mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both

having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing

bead of appropriate dimension. (Area of window up to 0.75 sqm.)

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

complete. (Internal Walls)

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface

having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50

grams/ litre. of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour.

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound ) content.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm

over and including priming coat of exterior primer applied

14.14.1 Red/ white sand stone slabs 30 to 50 mm thick. Sqm 126.00 1,099.15 1,38,493.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners ,

stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

Digitally signed by SANJAY

Providing and laying in situ seven course water proofing treatment with

APP (Atactic Polypropylene) modified Polymeric membrane over roof

consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th &

6th courses of bonding material @ 1.20 kg/sqm, which shall consist of

blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th

layers of roofing membrane APP modified Polymeric membrane 2.0

mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated

with centre core as 100 micron HMHDPE film sandwiched on both sides

with polymeric mix and the polymeric mix is protected on both side

with 20 micron HMHDPE film.

7th, the top most layer shall be finished with brick tiles of class

designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand)

mixed with 2% integral water proofing compound by weight of cement Sqm 450.00 732.75 3,29,738.00

over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and

finished neat (item of laying brick tiles shall be paid for separately).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement,

including cement slurry, but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 450.00 545.00 245250

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and

initial emittance > 0.75 on waterproof and sloped surface of terrace,

laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement :

4 coarse sand) and grouting the joints with mix of white cement &

marble powder in ratio of 1:1, including rubbing and polishing of the

surface upto 3 cuts complete, including providing skirting upto 150 mm

height along the parapet walls in the same manner.

Providing and fixing double scaffolding system (cup lock type) on the

exterior side of building/structure, up to 25 metre height, above ground

level, including additional rows of scaffolding in stepped manner as per

requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre

35 24.2 centre to centre, horizontal & vertical tubes joint with cup & lock system

with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in

the scaffolding for working platform etc. and maintaining it in a

serviceable condition for execution of work of cleaning and/ or

pointing and/ or applying chemical and removing it thereafter.

The scaffolding system shall be stiffened with bracings, runners,

connecting with the building etc, wherever required, if feasible, for

inspection of work at required locations with essential safety features

for the workmen etc., complete as per directions and approval of

Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be measured

for payment purpose.

(2) The payment will be made once only for execution of all items for

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to

a height of 5 m above floor level, over first class kail wood strips 25x6

mm with 10 mm gap in between and reinforced with rabbit wire mesh

fixed to wooden frame (frame work to be paidseparately):

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum

anhydrous) ceiling.

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately). Second class teak wood

Digitally signed by SANJAY

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block board construction with

frame of 1st class hard

39 9.20.1 wood and well matched teak three ply veneering with vertical grains Sqm 262.50 3,086.10 8,10,101.00

or crossbands and face veneers on both faces of shutters.35 mm thick

Fixing with hinges of required size and necessary screws

(Note: Hinges and necessary screws hall be paid separately

SITC Stainless steel SS-304 kitchen sink - with drain board 510 x 1040 mm

bowl depth 250 mm

Providing and fixing bright /matt finished Stainless Steel handles of

approved quality & make with necessary screws etc all complete.

Providing and fixing bright finished brass 100 mm mortice latch with one

dead bolt and a pair of lever handles of approved quality with

necessary screws etc. complete.

Providing and fixing modular kitchen units for the kitchen platform and

top wall units to be fabricated by using HDHMR board of thickness 18

mm for making cabinets of required sizes to match with the sizes SS

kitchen jali units and size of the SS sink as per following details:-

Front , bottom , top , sides and shelf partitions of the modular cabinets

shall be of 18 mm thick HDHMR boards of M/s Green panel Industries or

approved equivalent and back portion shall be of 8 mm thick HDHMR

board or approved equivalent with necessary fittings , screws , pasting

materials, finishing all exposed cut surfaces with self adhesive PVC tape

in matching shade as that of laminate . The shutters and the pull out

units shall be fixed 50 mm above the kitchen floor level . All the inner

portions of the cabinets shall be finished with 0.8 mm thick laminate of

white colour and approve make .. The front face of the cabinet shall

be finished with1 .0 mm ultra gloss laminate shade 21162 MR+ & 21069

MR+ Merino make The fittings like handles , telescopic channels , SS

baskets , auto closing hinges shall be paid separately under respective

items below. Quoted rates shall be inclusive of labour , materials ,

wastage , scaffolding , fixing arrangements of top and bottom units

with necessary dash fasteners , repairing the damages, shifting the

debris out of colony , CP , taxes etc all as required for the execution of

the work . Note :-Only front elevation area shall be measured for

payment purpose,

Top wall units of depth 300 mm approx. with shelves Sqm 105.00 18,000.00 18,90,000.00

Providing and fixing stainless steel baskets and other fittings, accessories

43 MR of modular kitchen of M/s Hettich or approved equivalent make as per each 224.00 3,000.00 6,72,000.00

below mentioned details :-

Complete Dismantling of internal wiring, switch boards change of

internal Wiring along with Switchboards, fans lights and etc

#REF! MR Dismantling of Water Tank over the roof with proper disposal of parts each 4.00 10,000.00 40,000.00

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

Complete dismantling of lifts along with disposal of old machine parts

as per Engineer incharge

Digitally signed by SANJAY

TV Cabinet Unit- in 18 mm HDHMR ply of size 1500mm x 1200 mm having

setup box holder, size 1200 mm x 200 mm placed 100 mm from bottom

#REF! MR of TV unit. All side with 2mm laminate of approved colour and provision Sqm 74.20 11,472.00 8,51,222.40

of 6/16 Amp socket at top, TV cable with switch plate. Two numbers of

n6/16 Amp socket with control switch above set up box

Low side Airconditioning works including chasing, Copper piping,

insulation of copper pipe, and repairing of chased area with cement

and mortar wherever required to match existing plastered surface.

#REF! MR Specified brand for insulation Superlon with wall thickness of minimum rmt 800.00 1,050.00 8,40,000.00

13mm. SPecified brand for copper piping. Only One (1) length

between indoor and outdoor unit shall be measured for payment.

Low side Airconditioning works including chasing, laying of drain pipe,

sealing of all joints, and repairing of chased area with cement and

mortar wherever required. For drain piping Supreme UPVC pipes of

10KGF to be used. Of 25mm Diameter.

Interconnecting cable for AC units between indoor & Outdoor untis

#REF! MR SITC Of chimney for kitchen. nos. 28.00 12,000.00 3,35,999.89

#REF! MR SITC of wardrobe as per design and detail. nos. 56.00 80,000.00 44,80,000.00

#REF! MR SITC of 20L gyeser nos. 56.00 12,000.00 6,71,999.79

#REF! MR SITC of 3L gyeser nos. 28.00 5,000.23 1,40,006.39

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling

#REF! MR @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on rmt 28.00 1,425.14 39,903.91

vertical & 12mm thk. Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

#REF! MR SITC of concealed door closer Nos. 28.00 6,241.99 1,74,775.68

#REF! MR SITC of Curtain Rod m 28.00 643.77 18,025.43

SITC of SS-304 Steel Safety Main door, with inetrnal SS-304 Mosquito

Mesh, with heavy duty interlock

1 SOLAR PANELS

Supply, Installation, Testing and Commissioning of on grid Solar

of Rates & Delhi

Photovoltaic Power Plant conforming to MNRE specifications as

amended, consisting of Mono/ Poly Crystalline silicon solar cells, net

metering facility, necessary protections, earthing, mounted on

(Item for Solar

Aluminium/ GI structure of suitable strength with following components

complete as required:-

a)Solar Photo voltaic Module of capacity 330W por above,

manufactured in India, conforming to IS 14286/ IEC61215, IS/ IEC61730 -

Part - 1, IS/IEC61730 - Part - 2. Solar Photo voltaic Module conversion

efficiency shall not be less than 16.5%. PV modules used in solar power

plants / systems must be warranted for their output peak watt capacity

,which should not be less than 90% at the end of 10 years and 80% at

the end of 25 years.

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range

and 400 V AC, three phase, 4 wire, 50 Hz+/- 2.5Hz, output voltage

suitable to generate AC Power with efficiency not less than 97%, total

harmonic distortion less than 3% and suitable for ambient temperature

from 0 to 50 degree C. The PCU shall adjust the voltage and frequency

level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP65 protection

and termination arrangement for incoming and out going cable along

with glands, lugs and other accessories etc. as required.

e) Lightning and surge voltage protection.

Digitally signed by SANJAY

f) Connections & Interconnections by supplying & fixing required size

XLPE insulated copper conductor 1.1kV grade armoured power and

control cables between solar modules, main power cable to grid kWp 20.00 76,325.00 15,26,500.00

supply PCU unit along with supplying & fixing of necessary channel/

conduit lugs and other accessories etc. as required.

WIRING IN STEEL

DSR NO/MR Sub Head 1 : WIRING IN STEEL AND PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent switch etc.) with 1.5 sq. mm

2 1.55 FRLS PVC insulated copper conductor single core cable in surface/

recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch, modular

suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as

Wiring for circuit/ submain wiring alongwith earth wire with the following

4 1.14 sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and drawing co-axial TV cable, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/ recessed

steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Digitally signed by SANJAY

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated

9 annealed copper conductor, armored telephone cable as required

similar to Skytone or equivalent.

Supplying and fixing two module stepped type electronic fan

10 1.25 regulator on the existing modular plate switch box including 168.0 Each 369.00 61,992.00 0.00

connections but excluding modular plate etc. as required.

Supplying and fixing following modular switch/ socket on the existing

11 1.24 modular plate & switch box including connections but excluding

modular plate etc. as required.

c 1.24.6 Telephone socket outlet 84.0 Each 148.00 12,432.00 0.00

d 1.24.7 TV antenna socket outlet 84.0 Each 148.00 12,432.00 0.00

RJ 45 Socket For Internet Similar to Legrand Cat Ref. 673155 or

Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing and fixing

3 pin 5/6 A modular socket outlet and 5/6 A modular switch,

connections etc. as required.

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing

and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and

15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in

front on surface or in recess including providing and fixing 25 A modular

socket outlet and 25 A modular SP MCB, “C” curve including

connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V,

complete as required.

Installation, testing and commissioning of ceiling fan, including wiring

17 1.44 the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS 168.0 Each 213.00 35,784.00 0.00

PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making

good the damage, connection, testing,commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust

fan of all sizes.

Digitally signed by SANJAY

Supply, installation, testing & commissioning of following size Telephone

KG Krone Box with hing door and mounting accessories as required.

Supply Installation testing and commissioning of Pach panel for internet

of following port with all additional accessories as required.

Supply Installation Testing & Commissioning of 2U Wall Mountable

24 MR powder coted Rack with 3x5A Power Manager, 1 position fan, min 2 7.0 Each 5,400.00 0.00 37,800.00

nos of shelf, Front Glass door with Lock & key at respective floor.

25 MR Supply, installation, testing & commissioning of TV Splitter Box. 28.0 Each 860.00 0.00 24,080.00

Sub Head 2 : DBs & MCBs

Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

1 2.3 copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 240/415 V, 10 kA, “C” curve, miniature circuit

breaker suitable for inductive load of following poles in the existing

MCB DB complete with connections, testing and commissioning etc. as

b 2.10.3 5 to 32 Amp. Double pole 28.0 Each 656.00 18,368.00

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red colour

on front side as required.

Sub Head 3 : Surface/Recess Luminaire

Supplying installation testing and commissioning Recess/Surface Mount

Downlighter Mollis Recess Downlighter 15W LED complete in all respect.

4 MR (RA-9) Supplying of 1200mm sweep ceiling fan (BLDC) 168.0 Each 3,214.63 5,40,057.10

Supplying installation testing and commissioning of 450mm sweep 1500

RPM heavy Duty Exhaust Fan .

6 MR Supplying installation testing and commissioning of 20W LED TUB LIGHT 84.0 Each 1,190.52 1,00,003.34

Sub Head 1 : Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 meter long etc. with

charcoal/ coke and salt as required.

Digitally signed by SANJAY

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

2 5.2 locking arrangement and watering pipe etc. with charcoal/coke and 16.0 Each 6,855.00 1,09,680.00 0.00

salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter

below ground as strip earth electrode, including connection/

3 5.9 terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing 30.0 Meter 144.00 4,320.00 0.00

shall be done by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50 mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from

4 5.11 earth electrode including connection with G.I. nut, bolt, spring, washer 500.0 Meter 706.00 3,53,000.00 0.00

excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required.

Sub Head 2 : Panel, Cable & End Termination

BUILDING L.T PANEL

The Main LT Panel shall use all draw out type breakers suitable for 415 V

AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have

AMF facility to achieve electrical interlocking, synchronizing,

buscoupler switching, auto operation of incommer and bus coupler,

auto start of D.G. Sets, auto D.G. running by pre set timing, auto

changeover etc and having following incomming and outgoing Air

Circuit Breakers, FSU's as per the drawing and specification.interlocking,

buscoupler switching, auto operation of incommer and bus coupler,

1 MR auto start of D.G. Sets, auto D.G. running by pre set timing, auto 1.0 Set 3,25,000.07 3,25,000.07

changeover etc and having following incomming and outgoing Air

Circuit Breakers, FSU's as per the drawing and specification.Each

incoming breaker will have microprocessor based releases and all

outgoing breaker will have minimum electrostatic releases or mention

as mention in BOQ. The Panel will be made as per detailed

specifications & drawings forming part of this document. Fault level of

panel shall be 35 MVA.

2 Nos. 160 Amp FP MCCB

1 Nos. 200 Amp TPN busbars of aluminium alloy as per SLD.

AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.

Load Management through PLC

Contactor for Load Management System

Buscoupler switching.

4 Nos. 63 Amp TP MCB

30 Nos. 40Amp DP MCB

2 sets of multifunction meter with parameter

current,voltage,KWH,KVAH,Power factor on incoming from transformers.

2 Sets of phase indicating lights (RYB) with protection fuses (one set for

each incoming breaker).

2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming

2 Sets auto trip indicating lamp .

Note: All outgoings should have ammeter and RYB indications with

backup MCB as indicated in single line diagrams.

30 Nos. Single Phase Energy Meter

Digitally signed by SANJAY

UNDER GROUND CABLES

Supply of 3.5core and 4 core 1.1 KV LT power cable with

solid/stranded compacted aluminium conductor, XLPE insulated colour

7 coaded, Laid up, PVC inner shethed armoured with single layer of

galvenized round wire or flat strip and over all ST-2 Grade PVC shethed

conforming to IS 7098 (part-1) and ISI marked.

Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 kV grade of following size direct in ground including

8 7.3 excavation and refilling the trench etc. as required, but excluding sand

cushioning and protective covering.

b 7.3.2 Above 35 sq. mm and upto 95 sq. mm 250.0 Meter 217.00 54,250.00 0.00

Laying of one number PVC insulated and PVC sheathed / XLPE power

9 cable of 1.1 kV grade of following size in the existing RCC/ HUME/

METAL pipe as required.

b 7.5.2 Above 35 sq. mm and upto 95 sq. mm 100.0 Meter 57.00 5,700.00 0.00

Laying of one number PVC insulated and PVC sheathed / XLPE power

10 7.6 cable of 1.1 kV grade of following size in the existing masonry open

duct as required.

b 7.6.2 Above 35 sq. mm and upto 95 sq. mm 100.0 Meter 45.00 4,500.00 0.00

Laying and fixing of one number PVC insulated and PVC sheathed /

11 7.8 XLPE power cable of 1.1 kV grade of following size on cable tray as

a 7.6.3 Upto 35 sq. mm (clamped with 1mm thick saddle) 330.0 Meter 63.00 20,790.00 0.00

Above 35 sq. mm and upto 95 sq. mm (clamped with 25 x 3mm MS flat

END TERMINATION

Supplying and making cable end terminations with brass compression

gland and aluminium lugs for folowing sizes of 3.5 Core and 4 Core

12 PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1

KV grade, complete as required.

1 Providing and fixing white glazed earthen wate (European type) W.C.

PWD SOR 2022 Pan 580mm dia,(10 ltr) C.I. Flushing Cistern complete with G.I. Pull each 56.00 3,850.00 2,15,600.00

SI.No.(4+8+6) chain,M.S.Bracket of Engineer-in-Charge.(Standered size)

2 Providing & fixing white vitreous china wash basin with C.I. brackets

painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber

plug, 32mm C.P. brass waste of standerd pattern including cutting &

making good the walls wherever required.

a)White Vitreous China Wash basin size 630x450 mm with a pair of 15

mm C.P. brass pillar taps

Digitally signed by SANJAY

3 Providing and fixing white vitreous china flat back half stall urinal of size

580*380*350mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps

(all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass including painting of fittings

and cutting and making good the walls and floors wherever required:

Range of single half stall urinals with 5 litre PV.C. automatic flushing

17.5.1 cistern.

4 Providing and fixing P.V.C. waste pipe for sink or wash basin including

17.28 P.V.C. waste fittings complete.

17.28.1 Semi rigid pipe

5 Providing and fixing 600x450mm bevelled edge mirror of superior glass

(of approved quality) complete with 6mm thick hard board ground

fixed to wooden cleats with C.P. brass screws and washers complete.

6 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S.

13983 with C.I. brackets and stainless steel plug 40 mm including

painting of fittings and brackets, cutting and making good the walls

17.10 wherever required :

17.10.1 Kitchen sink with drain board

7 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink

Bottle trap 38 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the waste

coupling, 77 mm breadth with 25 mm minimum water seal, weighing

17.70.2 not less than 263 gms

8 Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings

17.73 arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms. each 56.00 521.18 29,186.08

CP Brass fittings

9 Providing and fixing unplasticised PVC connection pipe with brass

18.21.2 45 cm length

10 Providing and fixing C.P. brass bib cock of approved quality

18.49 conforming to IS:8931

11 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

12 Providing and fixing C.P. brass angle valve for basin mixer and gyser

18.53 points of approved quality conforming to IS:8931

13 18.22 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet

Digitally signed by SANJAY

14 Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931:

18.52.1 15mm nominal bore each 4.00 516.32 2,065.28

1 Providing and fixing unplasticised-PVC pipe clips of approved design to

unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs,

screwed with MS screws of required length including cutting brick work

and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

2 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand

: 10 graded stone aggregate 20mm nominal size) around P.V.C Soil

DSR no.19.2.1 and waste pipe including bed concrete as per standard

design(embedded in the flooring / ground)

3 Providing and fixing on wall face unplasticised-Rigid PVC rain water

pipes conforming to IS: 13592 Type A including jointing with seal ring

conforming to IS: 5382 leaving 10mm gap for thermal expansion.

4 Providing and fixing on wall face unplasticised PVC moulded

fittings/accessories for unplasticised Rigid PVC rain water pipes

conforming to IS:13592 Type A including jointing with seal ring

12.42 conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.42.5.2 Bend 87.5 degree

12.42.6 Shoe (Plain)

5 Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams. Each 14.00 41.58 582.12

6 Providing and fixing unplasticised-PVC pipe clips of approved design to

unplasticised-PVC rain water pipes by means of 50x50x50 mm hard

wood plugs, screwed with MS screws of required length including

cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse

sand) and making good the wall etc. complete.

7 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse Each 14.00 231.44 3,240.16

sand) and a coat of neat cement,punning,rounding the edges and

making and finishing the outlet complete.

III INTERNAL WATER SUPPLY

1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the

same including testiang of joints complete as per direction of Engineer

Digitally signed by SANJAY

Concealed work including cutting chases and making good the walls

18.8.3 25mm dia nominal outer dia pipes Rm. 350.00 543.49 1,90,221.50

18.9.6 50mm dia nominal outer dia pipes Rm. 80.00 704.78 56,382.40

2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work-Exposed on wall

18.7.2 20 mm nominal outer dia Pipes Metre 350.00 282.23 98,780.50

3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good the walls

18.8.2 20 mm nominal outer dia Pipes Metre 180.00 446.00 80,280.00

4 Providing and fixing gun metal gate valve with wheel of approved

18.17 quality.

18.17.1 25mm dia nominal bore Each 11.00 462.15 5,083.65

17.17.4 50mm dia nominal bore Each 6.00 762.43 4,574.58

5 18.16 Providing and fixing brass stop cock of approved quality.

6 Providing and placing on terrace (at all floor levels)polyethylene water

storage tank ISI : 12701 marked indicating the BIS License No. with

cover and suitable locking arrangement and making necessary holes

for inlet, outlet and over flow pipes but without fitting and base support

for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI

18.48 license].

Capcity in Per Liters 25,000.00 8.42 2,10,500.00

TOTAL[III] 14,15,254.31

1 Providing and fixing in floor and wall face Ringfit UPVC Conventional

system for soil and waste water pipes conforming to Type B including

jointing with seal ring. (i) Double socketed pipes.

2 Providing & fixing UPVC Floor trap of self cleansing design with CP Jali

NSR complete in all respects.

P-Trap type Floor Trap 110 x 90 mm Nos. 20.00 270.09 5,401.77

3 NSR Providing and fixing terminal guard.

4 Providing and fixing on wall face unplasticised - PVC moulded

fittings/accessories for unplasticised Rigid PVC pipes including jointing

NSR with seal ring leaving 10 mm gap for thermal expansion.

Digitally signed by SANJAY

Single tee with door

5 Providing and fixing C.P. brass Two-way angle valve for EWC points &

for fixing Ablution Health Fauct of approved quality conforming to15

NSR mm nominal bore Each 10.00 1,270.22 12,702.22

6 NSR Providing and fixing clean out plug

7 Providing and fixing on wall face unplasticised-Rigid PVC pipes

conforming to IS: 13592 Type A including jointing with seal ring

NSR conforming to IS: 5382 leaving 10mm gap for thermal expansion.

160mm dia Under floor Metre 10.00 1,130.08 11,300.82

8 Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size fabricated

from 110 mm dia PVC pipes(approx. length=150mm to 300mm) and

fixed to PVC trap with joint and set in cement concrete as per standard

NSR drawing complete. Each 20.00 750.00 15,000.00

TOTAL [IV] 91,009.26

TOTAL INTERNAL WATER SUPPLY & SANITATION WORKS [I+II+III+IV+V] 15,06,263.57

Digitally signed by SANJAY

Sl No DSR No Description of Item Unit Quantity DSR Rate Amount(Rs) Market Rate (Rs) Amount(Rs)

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of

Engineer-in-charge..

15.7.4 In cement mortar opening kitchen wall Cum 10.00 1,698.45 16,985.00

Dismantling doors, windows and clerestory windows (steel or

2 15.12 wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below No. 120.00 302.70 36,324.00

Dismantling old plaster or skirting raking out joints and cleaning

3 15.56 the surface for plaster including disposal of rubbish to the

dumping ground within 50 metres lead.

Outer plaster Sqm 980.00 45.05 44,149.00

inner plaster Sqm 100.00 45.05 4,505.00

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead

4 15.23.1 15.23.1 For thickness of tiles 10 mm to 25 mm 760.00 60.50 45,980.00

Dismantling of cement concrete platform along with curtain

walls and base concrete etc. including stacking of useful

materials near the site and disposal of unserviceable materials

within 50 metres lead :

Removing dry or oil bound distemper, water proofing cement

paint and the like by scrapping, sand papering and preparing

the surface smooth including necessary repairs to scratches

for internal walls Sqm 940.80 20.85 19,616.00

for External ceiling Sqm 960.00 20.85 20,016.00

Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical

7 15.45 means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-charge:

Dismantling asbestos cement pressure pipes including

excavation and refilling trenches after taking out the pipes

manually/ by mechanical means and stacking the pipes within

50 metres lead as per direction of Engineer-in-charge :

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous

9 15.52 China) including stacking of useful materials near the site and No. 24.00 744.60 17,870.00

disposal of unserviceable materials within 50 metres lead.

Digitally signed by SANJAY

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means, including

#REF! 15.60 loading, transporting, unloading to approved municipal Cum 200.00 219.35 43,870.00

dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a

floating coat of neat cement.(External)

Extra for plastering exterior walls of height more than 10 m from

ground level for every additional height of 3 m or part thereof.

Repairs to plaster of thickness 12 mm to 20 mm in patches of

area 2.5 sq.meters and under, including cutting the patch in

proper shape, raking out joints and preparing and plastering

the surface of the walls complete, including disposal of rubbish

to the dumping ground, all complete as per direction of

Engineer-in-Charge

With cement mortar 1:4 (1cement: 4 coarse sand) with chiken

mesh/ fiber mesh

Extra for providing and mixing water proofing material in of 50kg

15 13.21 cement plaster work in proportion recommended by the cement 600.00 60 36,000.00

manufacturers. used in

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08%and conforming to IS : 15622 , of

16 11.41 approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey

cement slurry @ 3.3kg/sqm including grouting the joints with

white cement and matching pigments etc., complete.

Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4

(1 Cement : 4 Coarse sand), jointing with grey cement slurry @

3.3kg/sqm including pointing the joints with white cement and

matching pigments etc., complete.

18 13.6 20 mm cement plaster of mix : (for external walls)

19 15 mm cement plaster of mix: (for internal walls)

1:4 (1 cement: 4 coarse sand) Sqm 50.00 354.50 17,725.00

Digitally signed by SANJAY

Providing and laying water proofing treatment in sunken

portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of

applying : a) First layer of slurry of cement @ 0.488 kg /sqm

mixed with water proofing cement compound @ 0.253 kg/sqm.

20 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of SQM 216 516.6 1,11,586.00

slurry of cement @ 0.242 kg/ sqm mixed with water proofing

cement compound @ 0.126 kg/ sqm. This layer will be allowed

to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing

of all joints, corners, junctions of pipes and masonry with

polymer mixed slurry.

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling

and compacting Foam Concrete for raising level of toilets and

21 pantry and finishing in a coat of lean concrete screeding with CUM 64.8 5,525.00 358020

waterproofing compound complete in all respects to take Tile

Flooring as per flooring specifications.

TILE DADO :- Providing and fixing Ist quality ceramic glazed

wall tiles conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved

22 8.31 by Engineer-in-Charge, in skirting, risers of steps and dados, sqm 620 1063.45 6,59,339.00

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias and similar

locations of required size, approved shade, colour and texture

23 8.2 laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 Sqm

coarse sand), joints treated with white cement, mixed with

matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc.

complete at all levels

8.2.2 Granite stone slab colour black, Cherry/Ruby red Sqm 96.00 4,425.35 4,24,834.00

Providing edge moulding to 18 mm thick marble stone

counters, Vanitiesetc., including machine polishing to edge to

give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

8.3.2 Granite work metre meter 96.00 418.85 40,210.00

Digitally signed by SANJAY

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings

with 18 mm thick stone slab over 20 mm (average) thick base

25 11.56 of cement mortar 1:4 (1 cement : 4 coarse sand) laid and

jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

Three track three panels sliding window with fly proof SS wire

mesh (Two nos. glazed & one no. wire mesh panels) made of

26 9.147D.2 (small series) frame 92 x 44 mm & sash 32 x 60 mm both having Sqm 288.00 10,030.30 28,88,726.00

wall thickness of 1.9 ± 0.2 mm and single glazing bead of

appropriate dimension (Area of window upto 1.75 sqm).

Casement window single panel with S.S. friction hinges (300 x 19

x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x

27 9.147A.1 68 mm both having wall thickness of 1.9 ± 0.2 mm and single Sqm 120.00 10,443.75 12,53,250.00

glass pane glazing bead of appropriate dimension. (Area of

window upto 0.75 sqm.)

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over

the plastered wall surface to prepare the surface even and

smooth complete.

Applying priming coats with primer of approved brand and

29 13.85 manufacture, having low VOC (Volatile Organic Compound )

With water thinnable cement primer on wall surface

having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less

31 13.83 than 50 grams/ litre. of approved brand and manufacture,

including applying additional coats wherever required to

achieve even shade and colour.

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over

the plastered wall surface to prepare the surface even and

smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required

New work (Two or more coat applied @ 1.67 ltr/10 sqm

34 13.46.1 over and including priming coat of exterior primer applied Sqm 960.00 166.85 1,60,176.00

35 14.14.1 Red/ white sand stone slabs 30 to 50 mm thick. Sqm 50.40 1,099.15 55,397.00

Digitally signed by SANJAY

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts

and bolts complete, i/c fixing the railing with necessary

36 10.28 accessories & stainless steel dash fasteners , stainless steel bolts Kg 3,375.00 612.25 20,66,344.00

etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-in

charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such

as nuts, bolts, fasteners etc.).

Providing and laying in situ seven course water proofing

treatment with APP (Atactic Polypropylene) modified Polymeric

membrane over roof consisting of first coat of bitumen primer

@ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material

@ 1.20 kg/sqm, which shall consist of blown type bitumen of

14.88 grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing

membrane APP modified Polymeric membrane 2.0 mm thick of

3.00 Kg/sqm weight consisting of five layers prefabricated with

centre core as 100 micron HMHDPE film sandwiched on both

sides with polymeric mix and the polymeric mix is protected on

both side with 20 micron HMHDPE film.

7th, the top most layer shall be finished with brick tiles of class

designation 10 grouted with cement mortar 1:3 (1 cement : 3

fine sand) mixed with 2% integral water proofing compound by

weight of cement over a 12 mm layer of cement mortar 1:3 ( 1

cement : 3 fine sand) and finished neat (item of laying brick

tiles shall be paid for separately).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of

nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 260.00 545.00 1,41,700.00

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300

mm x 20 mm) with SRI (solar refractive index) > 78, solar

reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand

39 12.55 mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and Sqm 250.00 1,444.90 3,61,225.00

grouting the joints with mix of white cement & marble powder

in ratio of 1:1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm

height along the parapet walls in the same manner.

Digitally signed by SANJAY

Providing and fixing double scaffolding system (cup lock type)

on the exterior side of building/structure, upto 25 metre height,

above ground level, including additional rows of scaffolding in

stepped manner as per requirement of site, made with 40mm

dia M.S. tube, placed 1.5 metre centre to centre, horizontal &

40 24.2 vertical tubes joint with cup & lock system with M.S. Tubes, M.S.

tube challis, M.S. clamps and staircase system in the

scaffolding for working platform etc. and maintaining it in a

serviceable condition for execution of work of cleaning and/

or pointing and/ or applying chemical and removing it

The scaffolding system shall be stiffened with bracings, runners,

connecting with the building etc, wherever required, if feasible,

for inspection of work at required locations with essential safety

features for the workmen etc., complete as per directions and

approval of Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be

measured for payment purpose.

(2) The payment will be made once only for execution of all

items for such works.

Size of Tile 800x800 mm

Providing 10 mm thick plaster of Paris (gypsum anhydrous)

ceiling up to a height of 5 m above floor level, over first class

41 12.31 kail wood strips 25x6 mm with 10 mm gap in between and

reinforced with rabbit wire mesh fixed to wooden frame (frame

work to be paid separately):

Extra for sunk or raised mouldings in the plaster of Paris

(Gypsum anhydrous) ceiling.

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in

43 position with hold fast lugs or with dash fasteners of required cum 4.00 1,31,576.95 5,26,308.00

dia & length (hold fast lugs or dash fastener shall be paid for

separately). Second class teak wood

Providing and fixing ISI marked flush door shutters conforming

to IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood and well

44 9.20.1 matched teak three ply veneering with vertical grains or cross Sqm 56.00 3,086.10 1,72,822.00

bands and face veneers on both faces of shutters. 35 mm thick

Fixing with hinges of required size and necessary screws (Note:

Hinges and necessary screws hall be paid separately

SITC Stainless steel SS-304 kitchen sink - with drain board 510 x

1040 mm bowl depth 270 mm (min)

Providing and fixing bright /matt finished Stainless Steel handles

of approved quality & make with necessary screws etc all

Digitally signed by SANJAY

Providing and fixing bright finished brass 100 mm mortice latch

with one dead bolt and a pair of lever handles of approved

quality with necessary screws etc. complete.

Providing and fixing modular kitchen units for the kitchen

platform and top wall units to be fabricated by using HDHMR

48 MR board of thickness 18 mm for making cabinets of required sizes

to match with the sizes SS kitchen jali units and size of the SS sink

as per following details:-

Front , bottom , top , sides and shelf partitions of the modular

cabinets shall be of 18 mm thick HDHMR boards of M/s Green

panel Industries or approved equivalent and back portion shall

be of 8 mm thick HDHMR board or approved equivalent with

necessary fittings , screws , pasting materials, finishing all

exposed cut surfaces with self adhesive PVC tape in matching

shade as that of laminate . The shutters and the pull out units

shall be fixed 50 mm above the kitchen floor level . All the inner

portions of the cabinets shall be finished with 0.8 mm thick

laminate of white colour and approve make .. The front face of

the cabinet shall be finished with1 .0 mm ultra gloss laminate

shade 21162 MR+ & 21069 MR+ Merino make The fittings like

handles , telescopic channels , SS baskets , auto closing hinges

shall be paid separately under respective items below. Quoted

rates shall be inclusive of labour , materials , wastage ,

scaffolding , fixing arrangements of top and bottom units with

necessary dash fasteners , repairing the damages, shifting the

debris out of colony , CP , taxes etc all as required for the

execution of the work . Note :-Only front elevation area shall

be measured for payment purpose,

Top wall units of depth 300 mm approx. with shelves Sqm 40.00 18,000.00 7,20,000.00

Providing and fixing stainless steel baskets and other fittings,

50 MR accessories of modular kitchen of M/s Hettich or approved each 96.00 3,000.00 2,88,000.00

equivalent make as per below mentioned details :-

Supply and instalation of heavy duty SS 304 external grade

Cloth Hanger/Dryer for Balony, celing mounted with with UV

Protected Nylon Rope and Individual Drop Down Railer syetem

upto 12ft length

Complete Electrical works including Dismantling of internal

52 MR wiring, switch boards change of internal Wiring along with 8.00 5,310.00 42,480.00

Switchboards, fans lights and etc

Dismantling of Water Tank over the roof with proper disposal of

Digitally signed by SANJAY

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with cover

54 18.48 and suitable locking arrangement and making necessary holes per litre 20,000.00 9.70 1,94,000.00

for inlet, outlet and overflow pipes but without fittings and the

base support for tank.

Complete dismantling of lifts along with disposal of old

machine parts as per Engineer incharge

TV Cabinet Unit- in 18 mm HDHMR ply of size 1500mm x 1200

mm having setup box holder, size 1200 mm x 200 mm placed

100 mm from bottom of TV unit. All side with 2mm laminate of

approved colour and provision of 6/16 Amp socket at top, TV

cable with switch plate. Two numbers of n6/16 Amp socket with

control switch above set up box

Low side Airconditioning works including chasing, Copper

piping, insulation of copper pipe, and repairing of chased area

with cement and mortar wherever required to match existing

plastered surface. Specified brand for insulation Superlon with

wall thickness of minimum 13mm. SPecified brand for copper

piping. Only One (1) length between indoor and outdoor unit

shall be measured for payment.

Low side Airconditioning works including chasing, laying of

drain pipe, sealing of all joints, and repairing of chased area

#REF! MR with cement and mortar wherever required. For drain piping rmt 600.00 391.00 2,34,600.00

Supreme UPVC pipes of 10KGF to be used. Of 25mm Diameter.

Interconnecting cable for AC units between indoor & Outdoor

#REF! MR SITC Of chimney for kitchen. nos. 8.00 12,000.00 95,999.97

#REF! MR SITC of wardrobe as per design and detail. nos. 24.00 80,000.00 19,20,000.00

#REF! MR SITC of 20L gyeser nos. 24.00 12,000.00 2,87,999.91

#REF! MR SITC of 3L gyeser nos. 8.00 5,000.23 40,001.83

SITC of Inetrior Items Like, Pelmets,Curtain rods, Door Closeer,

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from

ceiling @1000mm centre to centre with 2 nos of 6mm thk.

Commercial ply on vertical & 12mm thk. Commercial ply on

horizontal surface (straight & curved). Inclusive of finishing in

#REF! MR SITC of concealed door closer Nos. 8.00 6,241.99 49,935.91

#REF! MR SITC of Curtain Rod m 8.00 643.30 5,146.41

SITC of SS-304 Steel Safety Main door, with inetrnal SS-304

Mosquito Mesh, with heavy duty interlock

1 SOLAR PANELS

Digitally signed by SANJAY

Schedule of Supply, Installation, Testing and Commissioning of on grid Solar

Rates & Delhi Photovoltaic Power Plant conforming to MNRE specifications as

Analysis of amended, consisting of Mono/ Poly Crystalline silicon solar

Rates (E&M) cells, net metering facility, necessary protections, earthing,

(Item for Solar mounted on Aluminium/ GI structure of suitable strength with

Photovoltaic following components complete as required:-

a)Solar Photo voltaic Module of capacity 330W por above,

manufactured in India, conforming to IS 14286/ IEC61215, IS/

IEC61730 - Part - 1, IS/IEC61730 - Part - 2. Solar Photo voltaic

Module conversion efficiency shall not be less than 16.5%. PV

modules used in solar power plants / systems must be

warranted for their output peak watt capacity ,which should

not be less than 90% at the end of 10 years and 80% at the end

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage

range and 400 V AC, three phase, 4 wire, 50 Hz+/- 2.5Hz, output

voltage suitable to generate AC Power with efficiency not less

than 97%, total harmonic distortion less than 3% and suitable for

ambient temperature from 0 to 50 degree C. The PCU shall

adjust the voltage and frequency level to suit the Grid Voltage

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP65

protection and termination arrangement for incoming and out

going cable along with glands, lugs and other accessories etc.

e) Lightning and surge voltage protection.

f) Connections & Interconnections by supplying & fixing

required size XLPE insulated copper conductor 1.1kV grade

armoured power and control cables between solar modules,

main power cable to grid supply PCU unit along with supplying

& fixing of necessary channel/ conduit lugs and other

accessories etc. as required.

Sub Head 1 : WIRING IN STEEL AND PVC CONDUIT

Digitally signed by SANJAY

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium PVC conduit

modular switch, modular plate, suitable GI box and earthing

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

2 1.55 conductor single core cable in surface/ recessed medium PVC

conduit conduit, and earthing the point with 1.5 sq. mm FRLS

PVC insulated copper conductor single core cable etc. as

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium PVC conduit conduit, 2 way modular switch,

suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium PVC conduit conduit

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Digitally signed by SANJAY

Supplying and drawing co-axial TV cable, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

8 1.21 cutting the wall and making good the same in case of

conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

9 insulated annealed copper conductor, armored telephone

cable as required similar to Skytone or equivalent.

Supplying and fixing two module stepped type electronic fan

10 1.25 regulator on the existing modular plate switch box including 48.0 Each 369.00 17,712.00 0.00

connections but excluding modular plate etc. as required.

Supplying and fixing following modular switch/ socket on the

11 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

c 1.24.6 Telephone socket outlet 32.0 Each 148.00 4,736.00 0.00

d 1.24.7 TV antenna socket outlet 32.0 Each 148.00 4,736.00 0.00

RJ 45 Socket For Internet Similar to Legrand Cat Ref. 673155 or

Supplying and fixing following size/ modules, GI box alongwith

12 1.27 modular base & cover plate for modular switches in recess etc.

Digitally signed by SANJAY

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing

and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing

and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and

15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

fixing 25 A modular socket outlet and 25 A modular SP MCB,

“C” curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase,

230 V, complete as required.

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5

sq. mm FRLS PVC insulated, copper conductor, single core

cable etc. as required.

Installation of exhaust fan in the existing opening, including

19 1.50 making good the damage, connection, testing,commissioning

etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes.

Supply, installation, testing & commissioning of following size

22 Telephone KG Krone Box with hing door and mounting

accessories as required.

Supply Installation testing and commissioning of Pach panel for

23 internet of following port with all additional accessories as

Supply Installation Testing & Commissioning of 2U Wall

Mountable powder coted Rack with 3x5A Power Manager, 1

position fan, min 2 nos of shelf, Front Glass door with Lock & key

at respective floor.

Digitally signed by SANJAY

Supply, installation, testing & commissioning of TV Splitter Box.

Sub Head 2 : DBs & MCBs

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

1 2.3 complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess

mounting, vertical type, 415 V, TPN MCB distribution board of

sheet steel, dust protected, duly powder painted, inclusive of

2 2.5 200 A tinned copper bus bar, common neutral link, earth bar,

din bar for mounting MCBs (but without MCBs and incomer ) as

required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

Supplying and fixing following rating, four pole, 415 V, isolator

3 in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing 240/415 V, 10 kA, “C” curve, miniature

circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red

colour on front side as required.

Sub Head 3 : Surface/Recess Luminaire

Supplying installation testing and commissioning Recess Mount

1 MR (RA-6) Downlighter Mollis Recess Downlighter 15W LED complete in all 200.0 Each 2,134.00 4,26,800.00

Digitally signed by SANJAY

4 MR (RA-9) Supplying of 1200mm sweep ceiling fan 48.0 Each 3,214.63 1,54,302.03

Supplying installation testing and commissioning of 450mm

sweep 1500 RPM heavy Duty Exhaust Fan .

Supplying installation testing and commissioning of 20W LED

Sub Head 1 : Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of

2.7 meter long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia

2 5.2 including accessories, and providing masonry enclosure with 16.0 Each 6,855.00 1,09,680.00 0.00

cover plate having locking arrangement and watering pipe

etc. with charcoal/coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter

below ground as strip earth electrode, including connection/

3 5.9 terminating with G.I. nut, bolt, spring, washer etc. as required. 30.0 Meter 144.00 4,320.00 0.00

(Jointing shall be done by overlapping and with 2 sets of G.I.

nut bolt & spring washer spaced at 50 mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

4 5.11 pipe from earth electrode including connection with G.I. nut, 500.0 Meter 706.00 3,53,000.00 0.00

bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

9 5.15 recess for connections etc. as required. 210.0 Meter 244.00 51,240.00 0.00

Sub Head 2 : Panel, Cable & End Termination

BUILDING L.T PANEL

Digitally signed by SANJAY

The Main LT Panel shall use all draw out type breakers suitable

for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The

panel shall have AMF facility to achieve electrical

interlocking, synchronizing, buscoupler switching, auto

operation of incommer and bus coupler, auto start of D.G.

Sets, auto D.G. running by pre set timing, auto changeover etc

and having following incomming and outgoing Air Circuit

Breakers, FSU's as per the drawing and

specification.interlocking, buscoupler switching, auto

operation of incommer and bus coupler, auto start of D.G.

Sets, auto D.G. running by pre set timing, auto changeover etc

and having following incomming and outgoing Air Circuit

Breakers, FSU's as per the drawing and specification.Each

incoming breaker will have microprocessor based releases and

all outgoing breaker will have minimum electrostatic releases

or mention as mention in BOQ. The Panel will be made as per

detailed specifications & drawings forming part of this

document. Fault level of panel shall be 35 MVA.

2 Nos. 160 Amp FP MCCB

1 Nos. 200 Amp TPN busbars of aluminium alloy as per SLD.

AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.

Load Management through PLC

Contactor for Load Management System

Buscoupler switching.

8 Nos. 63 Amp TP MCB

4 Nos. 40Amp DP MCB

2 sets of multifunction meter with parameter

current,voltage,KWH,KVAH,Power factor on incoming from

2 Sets of phase indicating lights (RYB) with protection fuses (one

set for each incoming breaker).

2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each

incoming breaker).

2 Sets auto trip indicating lamp .

Note: All outgoings should have ammeter and RYB indications

with backup MCB as indicated in single line diagrams.

8 Nos. 3 Phase Energy Meter

UNDER GROUND CABLES

Digitally signed by SANJAY

Supply of 3.5core and 4 core 1.1 KV LT power cable with

solid/stranded compacted aluminium conductor, XLPE

insulated colour coaded, Laid up, PVC inner shethed armoured

7 with single layer of galvenized round wire or flat strip and over

all ST-2 Grade PVC shethed conforming to IS 7098 (part-1) and

Laying of one number PVC insulated and PVC sheathed / XLPE

8 7.3 power cable of 1.1 kV grade of following size direct in ground

including excavation and refilling the trench etc. as required,

but excluding sand cushioning and protective covering.

b 7.3.2 Above 35 sq. mm and upto 95 sq. mm 250.0 Meter 217.00 54,250.00 0.00

Laying of one number PVC insulated and PVC sheathed / XLPE

9 power cable of 1.1 kV grade of following size in the existing

RCC/ HUME/ METAL pipe as required.

b 7.5.2 Above 35 sq. mm and upto 95 sq. mm 100.0 Meter 57.00 5,700.00 0.00

Laying of one number PVC insulated and PVC sheathed / XLPE

10 7.6 power cable of 1.1 kV grade of following size in the existing

masonry open duct as required.

b 7.6.2 Above 35 sq. mm and upto 95 sq. mm 100.0 Meter 45.00 4,500.00 0.00

Laying and fixing of one number PVC insulated and PVC

11 7.8 sheathed / XLPE power cable of 1.1 kV grade of following size

on cable tray as required.

a 7.6.3 Upto 35 sq. mm (clamped with 1mm thick saddle) 170.0 Meter 63.00 10,710.00 0.00

Above 35 sq. mm and upto 95 sq. mm (clamped with 25 x 3mm

END TERMINATION

Supplying and making cable end terminations with brass

12 compression gland and aluminium lugs for folowing sizes of 3.5

Core and 4 Core PVC insulated PVC sheathed/XLPE aluminium

conductor cable of 1.1 KV grade, complete as required.

Unit Quantity DSR Rate Amount(Rs) Market Rate (Rs) Amount(Rs)

Digitally signed by SANJAY

1 Providing and fixing white glazed earthen wate (European

PWD SOR type) W.C. Pan 580mm dia,(10 ltr) C.I. Flushing Cistern complete

2022 with G.I. Pull chain,M.S.Bracket of Engineer-in-

SI.No.(4+8+6) Charge.(Standered size) each 24.00 3,850.00 92,400.00

2 Providing & fixing white vitreous china wash basin with C.I.

brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass

chain with rubber plug, 32mm C.P. brass waste of standerd

pattern including cutting & making good the walls wherever

17.70 required.

a)White Vitreous China Wash basin size 630x450 mm with a pair

17.7.1 of 15 mm C.P. brass pillar taps each 24.00 1,974.99 47,399.76

3 Providing and fixing white vitreous china flat back half stall

urinal of size 580*380*350mm with white PVC automatic flushing

cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in D.P. brass) with waste

fitting as per IS : 2556, C.I. trap with outlet grating and other

couplings in C.P. brass including painting of fittings and cutting

and making good the walls and floors wherever required:

Range of single half stall urinals with 5 litre PV.C. automatic

17.5.1 flushing cistern. each 0.00 8,792.65 0.00

4 Providing and fixing P.V.C. waste pipe for sink or wash basin

17.28 including P.V.C. waste fittings complete.

17.28.1 Semi rigid pipe

5 Providing and fixing 600x450mm bevelled edge mirror of

superior glass (of approved quality) complete with 6mm thick

hard board ground fixed to wooden cleats with C.P. brass

17.31 screws and washers complete. each 24.00 1,225.06 29,401.44

6 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink

as per I.S. 13983 with C.I. brackets and stainless steel plug 40

mm including painting of fittings and brackets, cutting and

17.10 making good the walls wherever required :

17.10.1 Kitchen sink with drain board

7 Providing and fixing PTMT Bottle Trap for Wash basin and sink

Bottle trap 38 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the

waste coupling, 77 mm breadth with 25 mm minimum water

seal, weighing not less than 263 gms

Digitally signed by SANJAY

8 Providing and fixing PTMT towel rail complete with brackets

fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78

mm and effective height of 88 mm, weighing not less than 190

CP Brass fittings

9 Providing and fixing unplasticised PVC connection pipe with

18.21 brass unions

18.21.2 45 cm length

10 Providing and fixing C.P. brass bib cock of approved quality

18.49 conforming to IS:8931

11 Providing and fixing C.P. brass long body bib cock of approved

quality conforming to IS standards and weighing not less than

12 Providing and fixing C.P. brass angle valve for basin mixer and

gyser points of approved quality conforming to IS:8931

13 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet

14 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to IS:8931:

II RAIN WATER SUPPLY

1 Providing and fixing unplasticised-PVC pipe clips of approved

design to unplasticised-PVC pipes by means of 50x50x50 mm

hard wood plugs, screwed with MS screws of required length

including cutting brick work and fixing in cement mortar 1:4 (1

cement : 4 coarse sand) and making good the wall etc.

12.43 complete.

2 Providing and laying cement concrete 1:5:10(1 cement : 5

coarse sand : 10 graded stone aggregate 20mm nominal size)

around P.V.C Soil and waste pipe including bed concrete as

DSR no.19.2.1 per standard design(embedded in the flooring / ground)

Digitally signed by SANJAY

3 Providing and fixing on wall face unplasticised-Rigid PVC rain

water pipes conforming to IS: 13592 Type A including jointing

with seal ring conforming to IS: 5382 leaving 10mm gap for

12.41 thermal expansion.

4 Providing and fixing on wall face unplasticised PVC moulded

fittings/accessories for unplasticised Rigid PVC rain water pipes

conforming to IS:13592 Type A including jointing with seal ring

conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.42.5.2 Bend 87.5 degree

12.42.6 Shoe (Plain)

5 Providing and fixing to the inlet mouth of rain water pipe cast

iron grating 15 cm diameter and weighing not less than 440

6 Providing and fixing unplasticised-PVC pipe clips of approved

design to unplasticised-PVC rain water pipes by means of

50x50x50 mm hard wood plugs, screwed with MS screws of

required length including cutting brick work and fixing in

cement mortar 1:4 (1 cement : 4 coarse sand) and making

12.43 good the wall etc. complete.

7 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate of 20 mm nominal size) over PVC

sheet 1m x 1 m x 400 micron, finished with 12 mm cement

plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement,punning,rounding the edges and making and finishing

the outlet complete.

III INTERNAL WATER SUPPLY

1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing the

pipe with clamps at 1.00m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testiang of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good

18.8.3 25mm dia nominal outer dia pipes Rm. 125.00 543.49 67,936.25

Digitally signed by SANJAY

18.9.6 50mm dia nominal outer dia pipes Rm. 15.00 704.78 10,571.70

2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Internal work-Exposed on wall

18.7.2 20 mm nominal outer dia Pipes Metre 150.00 282.23 42,334.50

3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

18.8.2 20 mm nominal outer dia Pipes Metre 150.00 446.00 66,900.00

4 Providing and fixing gun metal gate valve with wheel of

18.17 approved quality.

18.17.1 25mm dia nominal bore Each 11.00 462.15 5,083.65

17.17.4 50mm dia nominal bore Each 6.00 762.43 4,574.58

5 18.16 Providing and fixing brass stop cock of approved quality.

6 Providing and placing on terrace (at all floor

levels)polyethylene water storage tank ISI : 12701 marked

indicating the BIS License No. with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and

over flow pipes but without fitting and base support for

tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid

18.48 ISI license].

Capcity in Per Liters 6,000.00 8.42 50,520.00

TOTAL[III] 6,61,843.14

NON SCHEDULED ITEMS

IV SANITARY INSTALLATIONS & C.P FITTINGS

1 Providing and fixing in floor and wall face Ringfit UPVC

Conventional system for soil and waste water pipes conforming

to Type B including jointing with seal ring. (i) Double socketed

Digitally signed by SANJAY

2 Providing & fixing UPVC Floor trap of self cleansing design with

NSR CP Jali complete in all respects.

P-Trap type Floor Trap 110 x 90 mm Nos. 20.00 270.09 5,401.77

3 NSR Providing and fixing terminal guard.

4 Providing and fixing on wall face unplasticised - PVC moulded

fittings/accessories for unplasticised Rigid PVC pipes including

jointing with seal ring leaving 10 mm gap for thermal expansion.

Single tee with door

5 Providing and fixing C.P. brass Two-way angle valve for EWC

points & for fixing Ablution Health Fauct of approved quality

NSR conforming to15 mm nominal bore Each 10.00 1,270.00 12,700.00

6 NSR Providing and fixing clean out plug

7 Providing and fixing on wall face unplasticised-Rigid PVC pipes

conforming to IS: 13592 Type A including jointing with seal ring

conforming to IS: 5382 leaving 10mm gap for thermal

NSR expansion.

160mm dia Under floor Metre 10.00 1,130.08 11,300.82

8 Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size

fabricated from 110 mm dia PVC pipes(approx. length=150mm

to 300mm) and fixed to PVC trap with joint and set in cement

concrete as per standard drawing complete.

TOTAL [IV] 91,014.43

TOTAL INTERNAL WATER SUPPLY & SANITATION WORKS [I+II+III+IV+V] 7,52,857.57

Digitally signed by SANJAY

Sr. No. Specifications Unit Quantity Rate Amount

A Design, manufacture, supply, installation, testing, commissioning,

1 Designation of Lifts Gearless Machine Room Lift

2 No. of Elevator 02

3 Type and Capacity 8 Passenger

4 Speed 1.0 m/s or more

6 Location of Machine Room Top of Shaft

7 Total Travel 21 mts (Approx)

8 Serving 07 Floors

9 No. of Stops 7

10 Wll Size 2000 mm (W) X 2034 mm (D)

11 Power Supply 415 V Three Phase 50 Cycles AC

12 Auxiliary Single Phase 220V 50 Cycles AC

13 Car Size 1600 mm (W) X 1500 mm (D)

14 Pit Depth 1600 mm

15 Head Room 6000 mm

16 CAR ENCLOSURE

Car Ceiling SS Hairline Finish or as approved

Car Panels SS Honeycomb Finish or as approved

Car Flooring PVC or as approved

Car Illumination LED

17 No. Of Entrance One location Front

Centre Opening Power Door in

18 Car Entrance Powder Coated

19 Door Safety Full Height Infra-red safety curtains

Centre Opening Power Door in

20 Landing Entrance Powder Coated

21 Clear Opening 1000mm (W) X 2000 (H)

22 Control Full Collective Simplex

KDS 90 Full Height COP- Surface

Mounted Buttons-White LED

KDS 90 LCI- Surface Mounted Buttons-

17 The lift to have following minimum specifications/ features and/or as

a OEM Motor / Machine

b 2 Hr Fire rated (min) landing doors (Approved and certified by an

c 24/7 Connected Services (IOT Services) / Elevator 24/7 Real time data

d L.W.D ( Load Weighing Device )

e Car Door Mechanical Lock as standard (Safety Feature).

f Daily Automatic Brake Testing (Safety Feature).

g Automatic Phase Reversal

h Automatic Rescue Device (Safety Feature)

i Direction & Position Indicator In Car

j Emergency Alarm

k 2 Phase Fireman Drive

l Hands Free Press & Speak Intercom

m Full height infra red safety curtains

p Signal Fixtures In Stainless Steel Finish

q Emergency Light With Rechargeable Battery

r Adjustable Guide Shoes

s Micro Movement LED Based Buttons.

t +10% to -10% Volt. Fluct. Withstand Capacity NOS 2 25,03,840.35 50,07,680.69

Sr. No. Specifications Unit Quantity Rate Amount

A Design, manufacture, supply, installation, testing, commissioning,

1 Designation of Lifts Gearless Machine Room Lift

2 No. of Elevator 01

3 Type and Capacity 8 Passenger

4 Speed 1.0 m/s or more

6 Location of Machine Room Top of Shaft

7 Total Travel 12 mts (Approx)

8 Serving 03 Floors

9 No. of Stops 3

10 Wll Size 2000 mm (W) X 2034 mm (D)

11 Power Supply 415 V Three Phase 50 Cycles AC

12 Auxiliary Single Phase 220V 50 Cycles AC

13 Car Size 1600 mm (W) X 1500 mm (D)

14 Pit Depth 1600 mm

15 Head Room 6000 mm

16 CAR ENCLOSURE

Car Ceiling SS Hairline Finish or as approved

Car Panels SS Honeycomb Finish or as approved

Car Flooring PVC or as approved

Car Illumination LED

17 No. Of Entrance One location Front

Centre Opening Power Door in

18 Car Entrance Powder Coated

19 Door Safety Full Height Infra-red safety curtains

Centre Opening Power Door in

20 Landing Entrance Powder Coated

21 Clear Opening 1000mm (W) X 2000 (H)

22 Control Full Collective Simplex

KDS 90 Full Height COP- Surface

Mounted Buttons-White LED

KDS 90 LCI- Surface Mounted Buttons-

17 The lift to have following minimum specifications/ features and/or as

a OEM Motor / Machine

b 2 Hr Fire rated (min) landing doors (Approved and certified by an

c 24/7 Connected Services (IOT Services) / Elevator 24/7 Real time data

d L.W.D ( Load Weighing Device )

e Car Door Mechanical Lock as standard (Safety Feature).

f Daily Automatic Brake Testing (Safety Feature).

g Automatic Phase Reversal

h Automatic Rescue Device (Safety Feature)

i Direction & Position Indicator In Car

j Emergency Alarm

k 2 Phase Fireman Drive

l Hands Free Press & Speak Intercom

m Full height infra red safety curtains

p Signal Fixtures In Stainless Steel Finish

q Emergency Light With Rechargeable Battery

r Adjustable Guide Shoes

s Micro Movement LED Based Buttons.

t +10% to -10% Volt. Fluct. Withstand Capacity NOS 1 28,16,820.39 28,16,820.39

S. No. DSR Code Description Unit Qty DSR Rate Amount Market Rate Amount

Surface dressing of the ground including removing vegetation and

1 2.28 inequalities not exceeding 15 cm deep and disposal of rubbish, lead

up to 50 m and lift up to 1.5 m.

2.28.1 All kinds of soil SQM 112.5 28.15 3,166.88

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth,

2 2.6.1 1.5 m in width as well as 10 sqm on plan) including getting out and Cum 187.5 205.45 38,521.88

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.- All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead

up to 50 m and lift upto 1.5 m.

Disposal of surplus earth by mechanical transport including loading,

unloading for a lead upto 10 Km.

Providing and laying in position cement concrete of specified grade

4.1 excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominal size)

Providing and laying in position ready mixed or site batched design

mixcement concrete for reinforced cement concrete work; using

coarseaggregate and fine aggregate derived from natural sources,

PortlandPozzolana / Ordinary Portland /Portland Slag cement,

admixtures inrecommended proportions as per IS: 9103 to

accelerate / retard settingof concrete, to improve durability and

workability without impairingstrength; including pumping of

concrete to site of laying, curing, carriagefor all leads; but

excluding the cost of centering, shuttering, finishingand

reinforcement as per direction of the engineer-in-charge; for

thefollowing grades of concrete.

Note : Extra cement up to 10% of the minimum specified cement

contentin design mix shall be payable separately. In case the

cement contentin design mix is more than 110% of the specified

minimum cementcontent, the contractor shall have discretion to

either re-design the mixor bear the cost of extra cement

5.33.1 All works upto plinth level

Concrete of M25 grade with minimum cementcontent of 330 kg

Steel reinforcement for R.C.C. work including straightening, cutting,

5 5.22 bending, placing in position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars KG 20439.10125 89.65 18,32,365.43

Centering and shuttering including strutting, propping etc. and

removal of form for :

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete SQM 134.45 307.95 41,403.88

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Providing and fixing 1st quality ceramic glazed floor tiles conforming

to IS : 15622 (thickness to be specified by the manufacturer ) of

approved make in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge in

skirting, risers of steps and dados over 12 mm thick bed of cement

Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm including pointing in white cement mixed with

pigment of matching shade complete.

Providing and mixing integral crystalline admixture for water

proofing treatment to RCC structures like basement raft, retaining

walls, reservior, sewage & water treatment plant, tunnels / subway

and bridge deck etc. at the time of transporting of concrete into

the drum of the ready-mix truck, using integral crystalline admixture

@ 0.80% (minimum) to the weight of cement content per cubic

meter of concrete) or higher as recommended by the

manufacturer’s specification in reinforced cement concrete at site

of work. The material shall meet the requirements as specified in ACI-

212-3R- 2010 i.e. by reducing permeability of concrete by more than

90%, compared with control concrete as per DIN 1048 and resistant

to 16 bar hydrostatic pressure. The crystalline admixture shall be

capable of self-healing of cracks up to a width of 0.50mm. The work

shall be carried out all complete as per specification and the

direction of the Engineer-in-charge. The product performance shall

carry guarantee for 10 years against any leakage.

Supplying, installation, testing and commissioning of Electric driven

1 1 Main Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required:

(a) Horizontal type, multistage, centrifugal, split casing pump of cast

iron body & bronze impeller with stainless steel shaft, mechanical

seal conforming to IS 1520.

(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous

speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz,

AC supply with IP 55 protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered with anti

vibration pads.

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and

consisting of following, complete in all respects, as required : (Diesel

Horizontal type, multistage, centrifugal pump of cast of iron body

and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520.

Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting

mechanism, 12 /24 volts electric starting equipment, diesel tank,

exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick aluminium

sheet cladding, residential silencer, instruments and protection as

per standard specification, stop solenoid for auto stop in the event

of fault with audio indications, painted with post office red colour

etc. as required.

M.S fabricated, common base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Supplying, installation, testing and commissioning of electric driven

3 3 pressurisation pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520.

Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS : 325.

M.S.fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Fabrication, supply, Insallation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley,

interconnection with suitable size copper conductor cable/solid

copper strip, having switchgears and accessories, mountings and

internal wiring, earth terminals, numbering etc. complete in all

respect, suitable for main fire pump, pressurisation pump & diesel

pump set complete as per CPWD specification with following in

coming and Outgoings, suitable for operation on 415V, 3 phase,

50Hz Ac Supply with enclosure protection class IP 42 as required :

4.1 5.1 Incomings

250A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector swtich & CTs

LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps

Set of Copper Bus Bar 300A

( Note : All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating lamps)

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta

starter suitable for 60 HP pump with overload protection, current

sensing type single phase preventor complete with all acceessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto/manual/OFF operation.

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic

Star/Delta starter with overload protection, current sensing type

single phase preventor complete with all acceessories and internal

wiring required for automatic operation, selector switch for

local/remote, auto/manual/OFF operation.

Diesel Engine Control

Control for diesel engine comprising -

Automatic/Manual selctor switch & 3 attempt starting device, timers

and relays as required, push buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp

and Engine on indication

Battery charger suitbale for 12V/24 V DC with boost and trickle

selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter

All standard relays and accessories for automatic operation of

System Controller

Designing, Supply, Installation, Testing and commissioning of system

controller to control operation of main electric fire pump, diesel

pump, Pressurization pump, Terrace pump in sequence as per

specification consisting of relays, timers. Sensors, annunciation

window for fault indication, complete as per specification

Providing laying, testing & commissioning of 'C' class heavy duty MS

Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. in ground including welding,

excavation & providing cement concrete blocks as supports,

anticorrosive treatment with coaltar/asphalt tape as per IS 10221,

refilling the trench etc. of following sizes complete as required.

Supplying and fixing Single headed external yard hydrant valve with

1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling

and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with

blank Gunmetal/Stainless Steel cap and chain as required :

6.1 10.1 Single headed Gunmetal Set 7.00 7,646.00 53,522.00

Supplying, fixing, testing and commissioning of butterfly valve of PN

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes

Supplying, fixing, testing & commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat,

ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required :

Supplying and fixing orifice plate made out of 6 mm thick stainless

steel (Grade 304) with orifice of required size to be fitted between

9 13 flange & landing valve of external and internal hydrants to reduce Each 0.00 0.00

pressure at the outlet to the level of 3.5 kg/cm2 complete as

Providing, installation, testing and commissioning of non-return valve

10 14 of following sizes confirming to IS: 5312 complete with rubber gasket,

GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of stainless steel Y-

11 15 strainer fabricated out of 1.6 mm thick stainless steel, Grade 304,

sheet with 3 mm dia holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm

12 16 dia male and female couplings duly bound with GI wire, rivets etc.

conforming to IS 636 (type-A) as required :

Supplying and fixing first-aid Hose Reel with MS construction spray

13 17 painted in post office red, conforming to IS 884 complete with the

following as required.

20 mm nominal internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall. Connections

from riser with 25 mm dia stop gun metal valve & M.S. Pipe and

Supplying & fixing 63 mm dia gun metal short branch pipe with 20

mm nominal internal diameter size nozzle conforming to IS 903

suitable for instantaneous connection to interconnect hose pipe

coupling as required :

Supplying and fixing of fire brigade connection of cast iron body

with gun metal male instantaneous inlet couplings complete with

cap and chain as reqd. for suitable dia MS pipe connection

conforming to IS 904 as required :

Providing and fixing ISI Marked of approved make Fire Extinguishers

complete with all accessories as per manufacturer's specifications.

MR CO2 gas nozzle type - 6.5 Litre capacity (IS:15683). Nos 40.00 9,153.00 3,66,120.00 0.00

BOQ OF MATERIALS FOR CCTV INSTALLATION

S No. Item Type Complete Technical Specification UNIT QTY RATE AMOUNT

Bullet CCTV OUTDOOR IP IR 4MP,

1/2.8" progressive scan CMOS

High quality imaging with 4 MP resolution

Excellent low-light performance with powered-by-DarkFighter technology

Audio visual alarm: The white flashing light and audible warning can be

triggered by certain events

25× optical zoom and 16× digital zoom provide close up views over

expansive areas

Expansive night view with up to 200 m IR distance

Focuses on human and vehicle targets classification based on deep

Face capture: Up to 5 faces captured at the same time

Up to 40-ch IP camera inputs

H.265+/H.265/H.264+/H.264 video formats

Up to 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity

2 NVR-8Ch 1 HDMI and 1 VGA interfaces: both interfaces support independent video NO 1.00 1,28,443.91 128443.9114

2 SATA interfaces for HDD connection (up to 10 TB capacity per HDD)

Up to 80 Mbps incoming bandwidth

Plug-and-play with 8 power over Ethernet (PoE) interfaces

2TB WD Purple Surveillance Internal Hard Drive HDD - SATA 6 Gb/s, 256 MB

6CORE OFC CABLE ARMOURED OS2

No. of Cores- 6 Core

Cable Type-Armoured

Cable Length-2Km

Mode Type-Single Mode

Jacket Material-LSZH

Operating Temperature--40 deg C to +70 deg C

Storage Temperature--40 deg C to +60 deg C

Bend Radius-Short term : 20D,Long Term : 10D

Jacket Thickness-1.8 +- 0.2 mm

5 Power Cable CABLE,CU,3CX1.5SQMM,ARMOURED,1.1KV,XLPE M 750.00 194.55 145910.2186

Media Converter FO/Ethernet

Standards and ProtocolsIEEE 802.3i, IEEE 802.3u

Basic FunctionAdopts WDM technology

Half/Full-Duplex transfer mode for FX port

Extends fiber distance up to 20km

Ports1 100M SC/UPC port

1 10/100M RJ45 port (Auto MDI/MDIX)

Wave Length1310nm Tx/1550nm Rx

Network Media 10BASE-TUTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

Network Media 100BASE-TUTP category 5, 5e cable (maximum 100m)

6 Media Converter EIA/TIA-568 100Ω STP (maximum 100m) NO 2.00 5,310.32 10620.63549

Network Media 100BASE-FXSingle-mode Fiber

LED IndicatorsPWR, Link/Act

Dimensions (W*D*H)3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)

Power SupplyExternal Power Adapter

Max Power Consumption2.41W

Safety & Emission FCC, CE, RoHS

Package Contents• Media Converter MC112CS

• Power Adapter

• Installation Guide

Environment Operating Temperature: 0℃~40℃ (32℉~104℉)

Storage Temperature: -40℃~70℃ (-40℉~158℉)

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~90% non-condensing

Digitally signed by SANJAY

8-Port Gigabit VPN Router

7 Router Port Configurable:1 port configurable (LAN/WAN) NO 2.00 20,060.60 40121.20387

Connectivity Technology: rj-45, USB

Number of Ports:8

8 Ethernet Switch NO 2.00 21,240.00 42480

Connector Type:Ethernet

LIU 6 PORT Rack Mount - Loaded

PATCH CORD SINGLE MODE DUPLEX 3M SC,

PIGTAIL SINGLE MODE (SC)

TERMINATION BOX 2WAY MODEL (Economy)

14 OutDoor N/W Rack IP 66 Outdoor Wall Rack 6U X 550mm W X 500 mm with PDU & FAN, IP66 NO 3.00 7,500.09 22500.26589

TOTAL 754425.06

Digitally signed by SANJAY

Sl No DSR No Description of Item Location Unit Quantity DSR rate Amount(Rs) Market Rate Amount(Rs)

Sub-Head : Rain Water Harvesting works

SITC of Rainwater Harvesting System as per Below mentioned procedure : Pit

excavation of 4x2x2 including boring of 300 dia of desired depth using UPVC

CM/RMS pipe 150 mm dia with MS/PVC Bail Plug and MS/PVC End Cap, including

preparation of base structure, Splitting of Stone Aggregate 20mm nominal Size/

Boulders 150mm, Jamuna sand layer 100 mm thick, including Installation/laying of

Non-Woven Geotextiles 400 GSM in Double layer, Installation of Modular cross

waves layer (Recycled Polypropylene made) Laying of Spacers on top Layer for

making monolithic/interlocking structure, Wrapping & Welding of Non-Woven

Geotextiles, Providing and laying Jamuna sand layer 50mm thick on top of

Geotextile, Refilling of Earth Excavation of Earth for Filter & Filter` Chamber up to

required depth Providing and laying CC 1: 5: 10 & 1: 2: 4 as base for fixing of pure

rain filters Installation of pure rain filters FRP Based, Construction of brick masonry silt

chamber Interconnection of UPVC Pipe with storm water drain and silt chamber,

filter, cross wave structure, testing of