REPAIR/ REPLACEMENT OF SEWAGE LINE, MANHOLES, RAIN WATER PIPE, EXTERNAL DRAIN AND MISC WORK OF 105 TA, 202 CEDU, 1883 CER BTY, GE OFFICE, TRANSIT OFFRS ACCN, JCOs/OR ACCN AT KANDHAR LINE INCLUDING REPAIR/ REPLACEMENT OF OLD UNSV ELECTRICAL FITTINGS W

Amount

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/ PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT. complete all as specified and as directed.

Cleaning of Manhole depth of 0.9 mtr and any size of MH in the area and taking out sludge and depositing complete all as specified and as directed.

Cleaning of Manhole depth exc 1.2 mtr and above of any size of MH in the area complete all as specified and as directed.

Cleaning of Sewage line diameter 100mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 150mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 200mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 300mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter exc 300mm bore complete all as specified and as directed. Note :- For execution of item from Srl No. 1 to 7 above Agency should deploy minimum of 04 Nos Safaiwala and 01 Nos Supervisors on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families is not adversly affected. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non attending Complaints:- (a) Complaint pending 3-24 hours - 500 Rupees per complaint.

Taking down Cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc omplete all as specified and as directed. Engr-in-Charge .

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete.

Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (100-200mm internal dia) of any description set in cement mortar.

Supply and laying, DWCPE(SN8) 150 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified. .

Supply and laying, DWCPE(SN8) 200 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified. .

Demolation Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:6 all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 incl demolition of brick work built in cement mortar compolete all as specified and directed.

S & F in replacement precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 450mmx450mmx50mm omplete all as specified and as directed.

S & F in replacement precast fibre reinforced cement concrete Manhole/drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x50 mm omplete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L for Dewatering and desludging of septic tanks of 100 to 200 users capacity using( mechanical device system) by dewatering sludge water and removing sludge/waste material etc. through container/tanker to a distance exc 5KM and complete all as specified and directed by the Engr-in-Charge.

M&L for Dewatering and desludging of septic tanks of upto 100 users capacity using( mechanical device system) by dewatering sludge water and removing sludge/waste material etc. through container/tanker to a distance exc 5KM and complete all as specified and directed by the Engr-in-Charge.

Mechanically used water fitting Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. (Zone - B.)

M&L for cement concrete 1:2:4 type B-I, using 20 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete.

S&F in repair PVC (SWR) bends any radius, 75 mm bore complete.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation

S&F Cequered cement concrete tiles with grey cement and pigment 300cm X 300cm x 25mm thick set jointed and pointed in neat cement slurry in floors and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete including dismantling all as specified and as directed.

M & L for Non skid 300x300x6-7mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height including dismantling complete all as specified directed by Engr-in-Charge.

M&L in repair for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm complete all as specified and directed.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm complete all as specified and directed.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Dismantling RCC posts or struts (wood steel or RCC) any section embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed. Note : Dismantling of existing galvanized iron steel barbed wire / Chain link fencing shall be measured & paid for separately.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling old Chain link fencing of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel galvanized chain link fencing 3.15mm dia of mesh wire, mesh size 50x50mm with straining bolts, with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc), binding and jointing complete, including necessary drilling, bolting or revetting etc, complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for sepaRately as supply only.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Supply & fix mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) for fixing in chain link wire fencing , complete all as specified & directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long and dia of neck 5 to 10 mm, complete all as specified & directed.

Dismantling steel barbed wire of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches n exc 1.5m wide and exc 1.5 m but n.exc 3.0m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soil complete all as specified and directed.

Removing excavated material (Soil) to a distance n.exc 50 m and depositing where directed at alevel n.exc 1.5 m above the starting point complete all as specified and directed.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

S&F tubular square pipe sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

Taking down care fully copper/aluminium point wiring from caping/casing or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge.

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size, including coduit and make from the site complete all as specified.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface PVC conduits as suitable of site (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, 3 mm thick hylem sheet cover for terminal boxes painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

All as per item No 65 above but one light/fan point controlled by one switch.

All as per item No 65 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per item No 65 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

All as per item No 65 above but One bell point controlled by one bell push.

All as per item No 65 above but One light point controlled by two Nos two way switches

All as per item No 65 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 15 Amps socket out let on independent board.

M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified.

M&L switch piano flush type 5 Amp SP two way.

M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.

M&L bell push,flush type,5 amp ISI marked complete all as specified.

M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.

M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.

M&L bell electric (ding dong) 230 volt, SP all as specified and directed.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including in and including concealed / surface PVC conduits as suitable of site Medium grade of ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.

All as per item No 76 above but one light /Ceiling fan/exhaust fan point controlled by one switch.

All as per item No 76 above but one bell point controlled by one bell push.

All as per item No 76 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

All as per item No 76 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per item No 76 above but one light point controlled by two Nos two way switches

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in and including concealed / surface PVC conduits as suitable of site (Medium grade) of ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified

M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified.

M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.

M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified.

M&L switch modular type 6 amp SP two way ISI marked complete all as specified.

Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including in and including concealed / surface PVC conduits as suitable of site (Medium grade) not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6.0 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with four run of single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed one run of stranded copper conductor cable of 10 Sqmm size stranded conductor as earthwire. Note:- Four run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 110 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 110 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

S& F in replacement recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete Make : CG/Havells/Philips/Orient

S & F in replacement of decorative type wall mounted luminaire (comet) with under take poly carbonate material suitable for 1 x 12 watts LED bulb B-22 base complete all as specified and as directed.

S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

S & F LED bulb 12 watts, 900 lumens output, 6500K suitable for B-22 base .

Refixing of Ceiling fan / exhaust fan/ fresh air including taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only.

M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

S&F in replacement capacitor of 3.15 MFD.

S&F in replacement gun metal bush of any size and make sutiable for ceiling fans 1200 mm compete all as specified and directed.

S&F in replacement ball bearing No. 6202./6203

S&F in replacement worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed.

S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed.

M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed.

S&F in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed.

Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only.

S&F in replacement only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed.

S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

S&F in replacement heating element of 2 KW triangular type with nut bolt washer complete all as directed.

M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.

Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet.

M&L MCB SPN 40 Amp "C " curve all as directed.

M&L MCB SP 6 to 32 Amp "C" curve all as directed.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete all as specified & dirceted by Engineer-in-Charge

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

S&F against BER exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete.

S&F against BER fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep (against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note: BLDC Fan should work through electronic fan regulator.

Supply & Fix all accessories of PCB BLDC ceiling fan including remote any type, any make & any capacity, including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge

S & F PVC canopy upper & lower of ceiling fan of any size & make complete with nuts, bolts & washers complete all as specified & directed by Engineer-in-Charge

Taking down old unsv downrod and S & F 1.5/2 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed.

Taking down old unsv down rod and S & F 3 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed.

Taking down old unsv ceiling fan rotor & S and F new rotor of ceiling fan of any sweep & make & making in good condition complete all as specified & directed.

S & F in replacement only of ceiling fan housing body parts complete all as specified and as directed by Engineer-in-Charge

S & F in replacement only spring of ceiling fan complete all as specified and as directed by Engineer-in-Charge

S & F in replacement only motor screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge

S & F in replacement only capacitor clamp of ceiling fan complete all as specified and as directed by Engineer-in-Charge

S & F in replacement only blade screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge

S & F in replacement only rubber clamp of ceiling fan with nuts, bolts & washers & safety pin complete all as specified and as directed by Engineer-in-Charge

S & F in replacement PVC cable copper conductor multistranded flexible wire 23/0.0076 twin core & making connection from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge

Taking down old unsv ceiling fan starter & S and F new starter of ceiling fan of any sweep & make & making in good condition complete all as specified & directed by Engineer-in-Charge.

Taking down old unsv exhaust fan louvers any type / capacity and S & F new exhaust fan louvers of capacity 300 mm sweep or any other capacity as per requirement at site complete all as specified and as directed by Engineer-in-Charge

Schedule of Credit

AAY AAY CONSTRUCTION (BID ID -3387603)

M/S MANINDER CONSTRUCTION CO. (BID ID -3387343)

M/S ANIL KUMAR (BID ID -3377843)

M/S Sunil Steel Works (BID ID -3379706)