Repair replacement of Furniture at RMS Dholpur under GE Bharatpur

Amount

Almirah steel large /medium /small ( FD-1031,FD-1032, FD1033, ,FD-67(M), FD-104(M):-Taking out existing old UNSV MS handle of almirah steel large /medium /small (1031, FD-1032,FD1033, FD-67M,104(M)). S&F new MS handles chromium plated (ISI marked, make : Godrej/Rina/Link) suitable for Almirah steel large /medium /small. MS handle chromium plated will fixed with shutter of almirah steel large/medium, rest all as per drg and directed by Engr-in-charge.

Taking out existing old UNSV lock of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M) S&F new lock with double key (ISI marked, make : Godrej/Link) suitable for Almirah steel large/medium. Lock with double key will fixed with shutter of almirah steel large/medium, rest all as per drg and directed by Engr-in-charge.

Taking out existing old UNSV lock cap of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M). S&F for lock cap of almirah steel large /medium. Lock cap will be fixed by riveted or screws as applicable, rest all as per drg and directed by Engr-in-charge.

Taking out existing old UNSV complete locking device from shutter of Almirah steel large (1031 FD1033,FD-67M,104(M) and S&F new locking device on shutter of Almirah steel large (1031,FD1033, FD-67M,104(M) properly. Shutter locking device MS rod should be ISI marked not less then 08mm thick and PGI sheet assy not less then 01mm thick including two coats of syntshetic enamel paint after a coat of red oxide primer, rest all as per specified and directed by Engineer-in-charge. .

Taking out existing old UNSV complete locking device from shutter of Almirah steel small (FD-1032) and S&F new locking device on shutter of almirah steel small (FD-1032) properly. Shutter locking device MS rod should be ISI marked not less then 08mm thick and PGI sheet assy not less then 01mm thick including two coats of syntshetic enamel paint after a coat of red oxide primer, rest all as per specified and directed by Engineer-in-charge.

Taking out existing old UNSV leg portion of Almirah steel large, Almirah steel with glass door of FD1031, FD-1032, FD1033, FD-67M,104(M) and S&F by welding of leg portion made to shape by 18 gauge plain sheet(1.2mm) of size 470 x 82 x 100 mm duly painted by two coats of synthetic enamel paint after a coat of red oxide primer, rest all as per Drg and directed by Engr-in-Charge.

Removing of old UNSV leg portion of almirah steel medium/small (FD 1032) and S&F by welding of leg portion made to shape by 18 gauge plain sheet (1.2mm) of size 415 x 82 x 100 mm duly painted by two coats of synthetic enamel paint after a coat of red oxide primer as directed by Engineer-in-Charge.

(FD 1032, Fixing only of steel sheet shelves in almirah medium/small of any thickness and any size/ shape by providing new screws or brackets or stoppers as fixed in repair as directed by Engr-in-Charge (shelves to be obtained from old unserviceable steel almirah)

Removing of old UNSV shelves of almirah steel large ( FD-1031,FD-67M,104(M) , S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint after a coat of red oxide primer as directed by Engineer-in-Charge.

Taking out existing old UNSV both shutters of almirah steel large (FD-1031, FD-67(M)) and S&F new both shutters of almirah steel large (FD-1031, FD-67(M). properly including locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked including two coats of syntshetic enamel paint after a coat of red oxide primer. Rest all as specified and directed by Engineer-in-Charge.

Taking out existing old UNSV both shutters of almirah steel small (FD-1032) and S&F new both shutters of almirah steel small (FD-1032) properly including locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked including two coats of syntshetic enamel paint after a coat of red oxide primer. Rest all as specified and directed by Engineer-in-Charge.

(FD 1031,FD1032, FD 1033, FD-67(M))104(M) S&F godrej pattern hinges of MS and shape & size as existing in steel almirah by fixing duly welded if required all as directed.

M&L for preparing old painted steel surfaces of steel almirah (large) (FD-1031, FD-1033,FD 67(M))104(M) and painted to all internal and external surface complete by spray/brush with one coat of synthetic enamel paint (OG)

Ditto all as per Srl item No 13 but steel almirah medium and small (FD-1032, )

Stool steel 510 mm FD 81(M):- M&L for preparing old painted steel surfaces of stool steel 510 mm high and spray/Brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces complete (FD-81M). Rest all as specified and directed by Engineer-in-charge.

Table dinning T-402DL of (Godrej) :-Taking out old UNSV top of table dinning and S&F new top of table dinning of T-402 DL(Godrej including 4mm thick teak wood beading around the table top with fixed to table frame by fevicol & steel screw. Top should be made of 18 mm thick prelaminated particle board ISI marked exterior grade. rest all as specified and directed by Engr-in-charge.

M&L for preparing old painted steel surface of table dinning with one coat of synthatic enamal paint on surfaces complete all as spacified and directed Engineer-in-charge.

Chair CB steel without arms (FD 75(M)):M&L for back frame of chair CB steel without arms (FD 75(M)). Back frame should be made of well seasoned IInd class HW free from all knots and defect duly caned with white coloured of 2 to 2.5 mm wide half round cane and bordered with 3.5 mm half round cane and painted with two coats of black synthatic enamal paint over a coat of wood primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screw, washers and nut bolts as applicable including taking down old unserviciable back completed all as spacified and directed by Engineer-in-charge.

All as per items ser No18 but size of seat frame of chair CB steel without arms.

M&L for preparing old painted steel surface of chair CB steel with arms (FD-75(M)) with one coat of synthatic enamal paint on surfaces complete all as spacified and directed by Engineer -in charge.

Book self open large steel FD-69(M)):-Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint after a coat of red oxide primer as directed by Engineer-in-charge.

M&L for preparing old painted steel surfaces of book self open large steel FD-69(M) and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete

Table Writing (1145x 600 x 760mm) (FD-275, ) :Taking out of old unserviceable top of table writing (1145 x 600 x 760) mm and S & F new top of table writing including 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

Taking out of old unserviceable legs of Table writing (1145 x 600 x 760mm) and S & F new legs of Table writing (1145 x 600 x 760mm) including all wood work surface shall be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (Teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

All as per items ser No 24 but Top (long) rail of Table writing (1145 x 600 x 760mm).

All as per items ser No 24 but but Top (short) rail of Table writing (1145 x 600 x 760mm).

All as per items ser No 24 but but Lower rail of Table writing (1145 x 600 x 760mm).

Taking out of old unserviceable drawers of Table writing (1145 x 600 x 760mm)and S & F new drawers of Table writing (1145 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia, rest all as per shown in drawing and directed by Engineer- in-charge.

Prepration of surface of Table writing (1145 x 600 x 760mm) with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of Table writing (1145 x 600 x 760mm) with best work man ship, rest all as per shown in drawing and directed by Engineer- in-charge.

Table (900 x 900 x 760 mm) FD-291:-Taking out old UNSV partical board top/part of table 900 x 900 x 760 mm, and S&F new top/part on the same items. Top should be made of 18 mm thick prelaminated particle board ISI marked decorated type exterior grade, including half round teak wood beading around the table top with fixed to table frame by steel screws & fevicol complete. Beading should be made of teak wood not less than 6 mm thick. Rest as shown on Drg and directed by Engineer-in-charge.

Taking out old UNSV leg of Table (900 x 900 x 760 mm), and S&F new leg of Table (900 x 900 x 760mm), including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg, legs should be made of 1st class hard wood well seasoned (Teak wood) free from all knots & creck, rest all as per shown in Dring and directed by Engineer-in-charge.

All as per items ser No 31 but top long rail of table (900 x 900 x 760 mm), rest all as per shown in Drawing and directed by Engineer-in-charge.

Preparation of all wooden surface part of table 900 x 900 x 760 mm, for poliish including fixing all loose wooden parts by screw of furniure articles by well skilled work men ship and M&L two coat french polish on all exposed surface of table 900 x 900 x 760mm with best work man ship, rest all as per shown in Drawing and directed by Engineer-in-charge.

Table Steel Tublar 920 x 920 x 760mm :- M&L for preparing old painted steel surface of table and paint on the complete steel surface with one coat of synthatic enamal paint rest all as per drg of table 920 x 920 x 760mm spacified and directed by Engineer -in charge.

Charpoy GI Pipe 32mm MDF withTop (FD-220):-Taking out old UNSV long rail of charpoy GI MDF Top (FD-220) and S&F new long rail should be made of GI pipe 32 mm dia medium grade ISI marked, make: TATA/ JINDAL/ SALT of charpoy GI MDF board . One nos new flate iron size 900mm x 25mm x 6mm long in the centre of long rail of each charpoy to be fixed by welding duly one nos hols for fixing of MDF board by flate head nut bolt with washer and as directed by Engineer -in- Charge.

Taking out existing old broken short rail from charpoy GI pipe 32mm with MDF top and providing in position short rails made out of old broken longs rail obtained from taking down above item No 35 including threading on both ends complete fixing all as spacified and shown on drg and by Engineer-in-Charge.

Taking out existing old UNSV broken leg from charpoy GI pipe 32 mm with MDF top and providing in position made out from GI pipe 32 mm dia obtained from item No 36 and S&F legs with IInd class HW block fitted at bottom of leg with screw and two Nos MS clamp of size 25mm x 3 mm size welded on legs incl painting of clamps with two coat of synthetic enamel Silver paint over a coat of red oxide primer complete all as spacified and directed and by Engineer-in-charge.

Taking out old unserviceable MDF Top from each charpoy GI pipe 32 mm with MDF Top(FD-220) and S&F new commercial plywood ISI mark 12mm thick of size 6'6" x 3" on the top with flate head nut & bolt with washer, rest all as per directed by Engineer -in- charge.

Taking out old unserviceable three way elbow from long rail /short rail etc of Charpoy GI pipe with MDF Top (FD-220) and supply and fixing in position new three way eilbow 32mm dia med. grade (ISI marked) all as per drg and directed by the Engineer-in-charge.

Taking out old unserviceable check nut from long rail /short rail etc of GI pipe Charpoy (FD-220 ) and supply and fixing in position new check nut 32mm dia 6mm thick complete all as per drg and directed by the Engineer-in-charge.

Desk Steel FD 1020-Taking out old unserviceable top, seat & back portion of Desk and S&F new top and back in the same place of desk with nut and bolt. Top should be made of 18 mm thick prelaminated particle board on both faces decorated type exterior grade, including half round teak wood beading around the table top with fixed to table frame by steel screw complete.

M&L for preparing old painted steel surfaces of desk steel and spray/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of desk steel Rest all as spacified and directed by Engineer-in-charge.

Two Seater Chair with Desk achiver model No 2&3:- Taking out old unserviceable MS conduit pipe & PGI sheet part of desk achiver and S&F new MS conduite pipe & PGI sheet part on the same place by welding. All iron necessory loose MS part of desk achiver model No 2 & 3 will be fixed by welding and nut bolt including one coat of synthetic enamel painting of all steel part. Rest all as spacified and directed by Engineer-in-charge.

M&L for preparing old painted steel surfaces of desk achiver model No 2&3 and spray/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of desk achiver model No 2&3. Rest all as spacified and directed by Engineer-in-charge.

Bed MS Godrej, Model Opal:-Taking out old unserviceable leg from head rest side of bed MS Godrej, model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg legs should be made of Ist class well seasoned hard wood free from all knots & creck, rest all as per shown in drawing and directed by Engineer-in-charge.

Taking out old unserviceable leg from foot rest side of Bed MS Godrej, Model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of Ist class well seasoned hard wood free from all knots & creck, rest all as per shown in drawing and directed by Engineer-in-charge.

Locker bed side steel (FD-1029):-Taking out existing old MS handle of Locker bed side steel (FD-1029). S&F new MS handle chromium plated suitable for Locker bed side steel. MS handle chromium plated will fixed with shutter of Locker bed side steel, rest all per drawing and directed by Engineer-in-charge.

Taking out existing old UNSV Hapse and staple of locker Bed side steel (FD-1029). S&F new Hapse and staple suitable for locker bed side steel, rest all as per drawing and directed by Engineer-in-charge.

Removing of old leg portion of locker bed side steel (FD-1029). S&F new leg of locker bed side by welding of leg portion made to shape by 18 gauge plain sheet (1.2mm thick) duly painted by two coats of synthetic enamel paint after a coat of red oxide primer, rest all as per drawing and directed by Engineer-in-charge.

M&L for preparing old painted steel surface of Locker bed side steel (FD-1029) and sprey/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete.

Book self open small steel:- Taking out existing old shelves of book case open small steel , and S&F new in the same place . shelves should be made of 18 gauge plain sheet (1.2 mm) duly painted by two coats of synthetic enamel paint after a coat of red oxide primer, rest all as per drawing and directed by Engineer-in-charge.

M&L for preparing old painted steel surface of Book case open small steel and spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete. Rest all as per directed by Engineer-in-charge.

Form with back FD-78 :- Taking out old unserviceable seat of form with back ( FD-78 ) and S&F new plank on seat of form with back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knods & creck, rest all as per shown in drawing and directed by Engineer-in-charge.

Taking out old unserviceable back of form with back( FD-78,) and S&F new plank on back of form with back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knots & creck, rest all as per shown in drawing and directed by Engineer-in- charge.

Taking out old unserviceable MS conduit pipe of Form with back and S&F new MS conduite pipe on the same place by welding including one coats of black colour synthetic enamel painting of all steel part, rest as per specified and directed by Engineer-in-charge.

M&L for preparing old painted steel surface of form with back( FD-78,) with one coats of synthetic enamel paint on surface complete all as per specification and directed by Engineer-in-charge.

Form with out back FD 77(M):- Taking out old unserviceable seat of without back (FD-77M,) and S&F new plank on seat of Form without back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knods & creck, rest all as per shown in drawing and directed by Engineer-in-charge.

Taking out old unserviceable MS conduit pipe of Form with out back and S&F new MS conduite pipe on the same place by welding including one coats of black colour synthetic enamel painting of all steel part, rest as per specified and directed by Engineer-in-charge.

M&L for preparing old painted steel surface of form without back(FD-77M ) with one coats of synthetic enamel paint on surface complete all as per specification and directed by Engineer-in-charge.

Table centre (FD-274) :- Taking out of old unserviceable top of table centre and S & F new top of table centre (900X450X400)mm encluding 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

Table Centre (FD-274) :- Taking out of old unserviceable legs of table centre and S & F new legs of table centrer including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

All as per items ser No 61 but long rail of Table Centre.

All as per items ser No 61 but short rail of Table Centre.

All as per items ser No 61 but Bottom rail of Table Centre.

Prepration of surface of Table Centre with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of Table Centre with best work man ship, rest all as per shown in drawing and directed by Engineer- in-charge.

Peg Table FD-227, FD/MAP/11 : Taking out of old unserviceable top of peg table and S & F new top of peg table encluding 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

Taking out of old unserviceable legs/ top rail of peg table and S & F new legs/top rail of peg table including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

Sofa set 5/4 Seater (FD-281) :- Taking out of old unserviceable cushioned seat of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mmx560 mm for seat of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitch. Colour /quality of cloth shall be approved byEngineer-in-charge. Rest all as per shown in drawing and directed by Engineer-in-charge.

Sofa set 5/4 Seater (FD-281) :- Taking out of old unserviceable cushioned back of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mmx560 mm for seat of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitch. Cololur /quality of cloth shall be approved by Engineer-in-charge. Rest all as per shown in drawing and directed by Engineer-in-charge.

Teapoy Wooden 600x450x540mm (FD-278, ) : Taking out of old unserviceable top of Teapoy wooden and S & F new top of Teapoy wooden including 3mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS- 3087-1985 one side decorative type other side balansing white, rest all as per shown in drawing and directed by Engineer- in-charge.

Taking out of old unserviceable legs of Teapoy wooden and S & F new legs of Teapoy wooden including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (Teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

All as per items ser No 71 but Top long rail of Teapoy wooden.

All as per items ser No 71 but Bottom rail of Teapoy wooden

Prepration of surface of teapoy wooden with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of teapoy wooden with best work man ship, rest all as per shown in drawing and directed by Engineer- in-charge.

Table 1520x860x760 mm FD-280 : Taking out of old unserviceable top of table 1520x860x760 mm and S & F new top of 1520x860x760 mm including 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

Taking out of old unserviceable legs of table 1520x860x760 mm and S & F new legs of table 1520x860x760 mm including all wood work surface shell be one coat of wood primer except where painting is indicated in drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

All as per items ser No 75 but long rail of Table 1520x860x760 mm

All as per items ser No 75 but short rail of Table 1520x860x760 mm.

All as per items ser No 75 but Stiffner of Table 1520x860x760 mm

All as per items ser No 75 but Bracket of Table 1520x860x760 mm

Prepration of surface of Table 1520x860x760 mm with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of Table 1520x860x760 mm with best work man ship, rest all as per shown in drawing and directed by Engineer- in-charge.

Bed Ply wood top (FD-246/247):- Taking out of old unserviceable ply wood from bed ply wood top and S & F new ply wood 12mm thick, ISI marked commarcial BWR quality on bed ply wood top . Ply wood should be made of 12 mm thick ISI marked commarcial BWR with phenol fromaldehyde, rest all as per shown in drawing and directed by Engineer- in-charge

Taking out of old unserviceable head rest of bed ply wood top and S & F new Head rest with short rail of plywood top. head rest made of commercial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head rest, rest all as per shown in drawing and directed by Engineer- in-charge.

Taking out of old unserviceable foot rest of bed ply wood top and S & F new foot rest with short rail of plywood top. Foot rest made of commarcial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head rest, rest all as per shown in drawing and directed by Engineer- in-charge.

Taking out of old unserviceable long rail of bed ply wood top and S & F new long rail of plywood top including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st grade hard wood well seasoned (Teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

Taking out of old unserviceable wooden short rail of Bed ply wood top and S & F new short rail of bed ply wood top including all wood work surface shell be one coat of wood primer. short rail should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

Taking out of old unserviceable wooden legs of Bed ply wood top and S & F new legs of bed ply wood top including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

Prepration of surface of bed ply wood top with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of bed ply wood top with best work man ship, rest all as per shown in drawing and directed by Engineer- in-charge.

Table without Drawer (900 x 600 x 760mm) (FD-55(M)) : Taking out of old unserviceable top of table without drawer (900 x 600 x 760) mm and S & F new top of Table without drawer (900 x 600 x 760)mm encluding 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

Taking out of old unserviceable legs of table without drawer (900 x 600 x 760mm) and S & F new legs of table without Drawer (900 x 600 x 760mm) including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (Teak wood) free from all knots & creck, rest all as per shown in drawing and directed by Engineer- in-charge.

All as per items ser No 89 but top (long) rail of table without drawer (900 x 600 x 760mm).

All as per items ser No 89 but top (short) rail of table without drawer (900 x 600 x 760mm).

All as per items ser No 89 but but Lower rail of table with drawer (900 x 600 x 760mm).

Prepration of surface of table without drawer with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table without drawer with best work man ship,rest all as per shown in drawing and directed by Engineer- in-charge.

Table 3' x 2' for Hav's(OR's) ( FD-223) : Taking out of old unserviceable top of table (900 x 600 x 760) mm and S & F new top of table (900 x 600 x 760)mm encluding 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing and directed by Engineer- in-charge

M&L for preparing old painted steel surface of table 900x600x760mm with one coat of synthatic enamal paint on surfaces complete all as spacified and directed Engineer-in-charge.

Table dressing ladies:- Taking out old unserviceable Mirror of table dressing ladies and S&F new Mirror of table dressing ladies as per Drg. Mirror should be made of 5.5mm thick electro copper plated of polished sheet glass as specified ISI marked best quality, rest all as per shown in drawing and directed by Engineer-in-charge.

Table dressing Gents:- Taking out old unserviceable mirror of table dressing gents and S&F new mirror of table dressing gents as per drg. Mirror should be made of 5.5mm thick electro copper plated of polished sheet glass as specified ISI marked best quality, rest all as per shown in drawing and directed by Engineer-in-charge.

Desk and Chair for Single Student of overall size Make Durian:- Taking out old unserviceable MS conduit pipe & PGI sheet part of sk and Chair for Single Student of overall size and S&F new MS conduite pipe & PGI sheet part on the same place by welding. All iron necessory loose MS part of Desk and Chair for Single Student of overall size will be fixed by welding and nut bolt including one coat of synthetic enamel painting of all steel part. Rest all as spacified and directed by Engineer-in-charge.

M&L for preparing old painted steel surfaces of Desk and Chair for Single Student of overall size Make Durian and spray/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of Desk and Chair for Single Student of overall size Make Durian. Rest all as spacified and directed by Engineer-in-charge.

Taking out Old UNSV (FMN Set) for charpoy GI 32 mm width of MDF board and S&F new FMN Set Rest all as speicified and directed by Engr-in-charge

L.BHIMSEN

GLOBAL ENGINEERS AND INNOVATORS

AJAY TRADERS