40 mtr span bridge over Khera Nallah

Amount

Earth work in excavation for structures by manual/mechanical means in all depths as per drawing and technical specification clause including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock(where blasting is prohibited) all earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of useful materials for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner treaming filling of unevenness blindage and finishing of the road to specified dimension or as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 4952.25 cum (Four thousand nine hundred fifty two decimal two five ) cubic metre @ Rs. 300/- (Rupees three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain/ reinforced Cement concrete grade M- 10 (Ten) design mix and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may be arise at the time of laying under water complete for all heights and depths including the cost of form work, and including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated plain/Reinforced cement concrete M-30 (Thirty)grade Design Mix using graded crushed stone aggregate with minimum cement contents 450 Kg (Four hundred fifty) Kilogramme per Cubic metre with admixture as specified in design mix in foundation complete including pumping or bailing out water, dewatering, removal of slush as required at site which may be arise at the time of laying under water complete for all heights and depths including the cost of form work, curing complete and including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement made of TATA SAIL, TISCO. in foundation in all heights including the cost of binding wire and cost of cutting, binding, and placing in postion of bars complete as per drawing and technical specfication including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing and laying mechanically mixed and vibrated Reinforced cement concrete M-30 (Thirty) grade using gradeed/crushed stone aggregate 20(Twenty) millimetres Nominal size design mix with minimum cement contents 450 Kg (Four hundred fifty Killogramme) with admixture in substructure and curring complete including pumping or bailing out water, dewatering, removal of slush including the cost of form work, and including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement made of TATA Tiscon SAIL. in sub structure in all heights including the cost of binding wire and cost for cutting, binding, bending, placing in postion of bars complete as per drawing and technical specfication including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing and laying filter media with granular material / stone crushed aggregates specfication to a satisfying the requiremnts to laid down in clause 2504.2.2 of MORTH thickness of not less than 600mm(six hundred millimeter) with similar size towards the soils and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return walls, to the full height compacted to firm condition complete as per drawing and technical specification Rural Road . including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in abutment,wing wall, retaining walls, breast walls and the like with 100mm ( One hundred )millimetre dia AC pipeof Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and MoRTH technical specification clause 2706 with in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and Technical Specifications and BS: 5400,(fifty four hundred) section 9.1 & 9.2 (for PTFE) and clause 2004 of MORTH specification including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Furnishing and Placing Reinforced/Prestressed RCC grade M-40 (Forty) grade design mix using graded /crushed stone aggregate with minimum cement contents 475.00 Kg (Fourt hundred seventy five) Kilograme per Cubic metre with admixture as specified in design mix Mechanically mixed and vibrated cement concrete in super-structure as per drawing and Technical specification including the cost of form work and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying reinforced Cement concrete M-30 (Thirty) grade Design mix with minimum cement contents 425.00 Kg (Four hundred twenty five) Kilograme per Cubic metre with admixture Mechanically mixed and vibrated in Approach slab including reinforcement and form work complete as per drawings and MoRTH technical specifications Clause 2704 including the cost of form work and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying concrete Mechanically mixed and vibrated wearing coat M-30 (Thirty) grade Design mix using graded /crushed stone aggregate and minimum cement contents 450.00 Kg (Four hundred fifty) Kilograme per Cubic metre with admixture specified in design mix including reinforcement complete as per drawings and MoRTH technical specifications Clause 2702 including the cost of form work and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD Bars reinforcement made of TATA Tiscon,SAIL in superstructure including cost of bending, binding, cutting and placing in postion of bars complete as per drawing and technical specifications including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Prviding and fixing precast RCC railing mechanically mixed and vibrated cement concrete design mix minimum compressive strengthof grade M-30 (thirty) with admixture with graded crushed stone aggregate size not exceeding 12 mm (twelve milimeters), true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand milimeters), leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications and reference to MORT&H specification 2703, 1500, 1600 & 1700 including the cost of form work and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Drainage Spouts complete as per drawing and Technical specification of MORT&H Section 2705 as directed by the Engineer-in-Charge including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 (Seventy) millimetres , complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation and curing complete including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing in position 20(Twenty) millimetres thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm (twenty millimetres), covered with sealant complete as per drawing and technical specifications including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6(Six) percent cent bitumen by weight including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting complete as per drawing and Technical Specifications of MORT&H including entire carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Compacting the orginal ground supporting Sub grade Loosening of the ground upto any level below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2. including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of Sub-grade and Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MoRD Technical Specification Clause 303.1 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of granular sub base by providing well graded materials grading -1 spreading in uniforms layers with tractor mount grader on prepared surface, mixing in a mechancally mix plant at OMC, Carriage of mix material to spreading in uniform layer with motor grader on prepared surface and compacting with vibrator roller to achieve the desired denisty, complete as per MoRD technical specification Clause 401 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100KN ( eighty into hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 and 400.12 and MoRD Technical Specification Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85kg/sqm (Zero point eight five kilogram per square metre ) using mechanical means as per MoRD Technical Specification Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 Kg per sqm (Zero point two seven five kilogram) per square metre on prepared bituminious surface and cleaned with hydraulic broom as per MoRD technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying and rolling of open graded premix carpet of 20mm (Twenty millimetre) compacted thickness composed of 13.2mm to 5.6mm ( Thirteen point two millimetre to five point six millimetre) course stone agreegate @ 0.27( Zero point two seven) cubic metre per 10 (Ten) square metre mixed with 14.6 ( Fourteen point six ) Kilogramme per 10 (ten) square metre bitumen VG-10 (Viscosity Grade-Ten) M/S INDIAN OIL CORPORATION Ltd., M/S TOTAL OIL INDIA Pvt. Ltd. andBharat petrolium to required line,grade and level to serve as wearing course on previously prepared base including mixing and heating binder and aggregate in a suitable hotmix plant 30/40 (thirty to forty) tonne per hour capacity transporting mixed material and laying with paver finisher and rolling with a Three wheel 80-100 KN (Eighty- hundered ) capacity static roller finished to required level and grades to be followed by seal coat Type B as per MORD Technical specification clause 506 by machenical means as per direction of Engineer-in-Charge including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per MoRD Technical specification clause 508 using VG-10 (Viscosity Grade - Ten) M/S INDIAN OIL CORPORATION Ltd., M/S TOTAL OIL INDIA Pvt. Ltd. and Bharat petrolium at the rate 6.8 (Six point eight kilograme) per 10 Sqm (ten Square metre) premix with 0.06 Cum (Zero point zero six )Cubic metre of fine aggregate per 10 Sqm (Ten Square metre ) by mechanical means and rolling with power road roller with three wheel 80 to100 ( Eighty to hundred ) capacity, as per direction of Engineer-in-Charge including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

M.S JAGDISH CHAND GUPTA

V K Gupta and Associates