REP/MAINT OF COMPOUND WALL, DRAIN AND FENCING ETC REP TO WALL, TILING PLUMBING ,WORK IN MES INTALLATION BLDG AT LEIMAKHONG

Amount

B/R work

M & L for PCC M-10 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.

M & L for PCC M-15 grade (Nominal mix) using 12.5mm graded crushed stone aggregate as in coping including necessary formwork complete all as specified and as directed.

M & L for pcc(1:2:4) type B1(using 20 mm graded stone aggregate) as in bond stone(for stone walling) set in cement mortar (1:6) including necessary form work.complete all as specified and directed.

M&L for RCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Supply only intergral water proofing compound ISI marked

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cm (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressedsurface n exc. 40 mm granite or trap stone. complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, fair finished complete all as specified and directed

S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed

S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured).complete all as specified and directed.

M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed.

M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M & L for rendering 5mm thick plaster in cement mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)

M & L for rendering 10mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed..(Using Dimapur Sand) [Note: WPC will be measured and paid separately)

M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

S&F GI tubing (ISI Marked) 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing (ISI Marked) 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 15mm dia of GI tubing and connections and removal from site complete all as specified and directed.

Taking up or down 20mm dia of GI tubing and connections and removal from site complete all as specified and directed.

S & F in repair bib taps(ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm dia or for brass ferule complete all as specified and directed.

S & F in repair pillar tap 15mm bore cast copper alloy (ISI marked) with capstan head complete all as specified and directed.

S & F in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 40mm dia Waste coupling of PTMT (half or full threaded)suitable for urinals complete all as specifed and directed. (Minimum weight 40mm-60gms)

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

M&L PVC SWR pipe dia 110mm single socketed in any length with rubber ring fixed in floor or wall. complete all as specified and directed.Includind taking down exist u/s pipe

M&L PVC SWR pipe dia 75mm single socketed in any leanth with rubber ring fixed in floor or wall. complete all as specified and directed.Includind taking down exist u/s pipe

M&L PVC SWR pipe dia 110mm single socketed in any leanth with rubber ring joints, laid in trenches or floors.complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers completed all as specified and directed.

S&F in repair stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. (Make: Blue Star Model No BSSBSD-52 or equivalent in Nirali Brothers / Prayag/ Cera)

S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, back inlet and integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

S & F in repair wash basin, vitreous china (flat back or angle back type), white, 550 x 440 mm size, white, including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

Dismantling of barbed wire from fencing post etc complete all as specified and directed.

M/S N JADUMANI SINGH

RK Enterprises

M/S BIJOYA LAXMI ENTERPRISE

SHARMA ENTERPRISE

M/s Ritz Marketing

M/s SSS Motors

SUBHASH CHAND GUPTA