SPL REPAIRS TO BDY WALL ADJACENT TO DILKUSHA GARDEN AT GAUR ENCLAVE UNDER GE (W) LKO

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Surface dressing n exc 15 cm deep soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m in depth for foundation ,. n.exc. 10 sqm on plan and n.exc 1.5 mtr in depth and getting out complete in soft/loose soil complete all as specified and directed.

M & L for cement concrete type D2 1:4:8 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified and directed.

M & L for form works rough finished surfaces of concrete side of concrete foundation , footing , bases of coloumns raft and raft beams sides and sofits if any of foundation and plinth beams and similar work flat , vertical or to batter complete all as specified and directed.

M&L for form work to sides of pillar, posts, struts ,columns etc complete all as specified and directed.

M&L for form work to sides and soffits of beams lintel band and the like complete all as specified and directed.

S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F for MS TMT bars 5mm to 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete in foundation, footings complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in beam cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) complete all as specified and directed.

M & L for 15 mm thick rendering cement plastering on other than fair faces of brick work or concrete surfaces 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L preparation of new plaster surface and applying two coats of cement base paint over a coat of primer over newly plastered wall surfaces complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for fising to beep hole etc complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; cement concrete 1:3:6 type C-2 complete all as specified and directed.

S&F 300 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe-290-Gde-E-165 complete all as specified and directed.

S&F in repair 2.50 mm dia of wire Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at rossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Concertina coil fencing with punched tape coil 450mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shape barbs with 18 SWG sheet, spring core 2.5mm thick wire with tape 0.52mm thick and weight of each coil should not be less than 7.50 Kg, each coil should have 50 rounds and should covers 6 RM length, fixed over and including 6 lines of horizontal RBT (reinforced barbed tape) wire or razor wire at points wherever coil touches the bottom of wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed. NOTE: (i) Hogging shall be fixed at a interval of 600mm centre to centre, wherever it touches with the razor wire. (ii) Overlapping of concertina coil and razor wire shall be 300mm. (iii) Y shaped angle iron post shall be measured and paid separately under respective items. MAKE: M/s Global Engg or M/s Specials steels Ltd or M/s Super Fence or other equivalent make as approved by GE.

M &L for preparation of steel surfaces of any description over 10cm in width or girth not otherwirse described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil as required complete all as specified and directed.

Removing excavated materials soil n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

Earth filling under floor filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcomplete all as specified and directed. Note- Material obtained from excavation shall be reused.

M & L for angle posts and struts in fencing including cutting tops to shape as directed drilling holes notching for hole including necessary drilling bilting or rivetting complete or forged into spikes framed guards bars conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even incl Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note :- WPC shall be measured and paid seperatelly

M/S PERFECT CONSTRUCTION CO. (BID ID -3511926)

Spectrum Enterprises (BID ID -3506114)

M/S S S A ASSOCIATES (BID ID -3509923)

Matrubhoomi Construction (BID ID -3505673)