Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC PLOT NO 59 60 WAZIDPUR JAIMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹21.7 L+₹75,571 (3.61%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹21.8 L+₹84,199.80 (4.02%)Rejected-Finance B 11 SCHOOL ROAD UTTAM NAGAR NEW DELHI 110059 | NEW DELHI | DELHI | DELHI | 110059 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹22.0 L+₹1.0 L (4.94%)Rejected-Finance 35 MODEL TOWN G T ROAD JANDIALA GURU DISTRICT AMRITSAR | JANDIALA GURU | AMRITSAR | PUNJAB | L4 | Rejected-Finance Rejected | |
| 5 | L5₹22.6 L+₹1.6 L (7.73%)Rejected-Finance | L5 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | B. S BUILDERS L7 | STAR CONSTRUCTION CO L4 | LAIQ RAM VERMA L5 | Dhirendra Singh & Sons L1 | M/s Naresh Kumar Gupta & Co. L3 | HARICHAND CONSTRUCTION L6 | RIZCON L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-Charge. | 2,550 | Sqm | 9 ₹22,950 | 4 ₹10,200 Lowest | 10 ₹25,500 | 5 ₹12,750 | 20 ₹51,000 | 9 ₹22,950 | 5 ₹12,750 |
| 2.00 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement including water proofing compound complete all as specified and directed by Engineer-in-Charge. | 3,000 | Sqm | 231 ₹6,93,000 | 158 ₹4,74,000 | 122 ₹3,66,000 | 140 ₹4,20,000 | 70 ₹2,10,000 Lowest | 191 ₹5,73,000 | 120 ₹3,60,000 |
| 3.00 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tined) with silicon additives @ 1.43 Ltr/10 sqm over and including primer coats of exterior primer applied @ 0.90 Ltr/10sqm over new surface over a coat of primer (chalk whiting ) complete all as specified and directed by Engineer-in-Charge. | 3,000 | Sqm | 61 ₹1,83,000 | 35 ₹1,05,000 Lowest | 55 ₹1,65,000 | 52 ₹1,56,000 | 40 ₹1,20,000 | 75 ₹2,25,000 | 46 ₹1,38,000 |
| 4.00 | Dismantaling of brick masonry work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Chrage. | 50 | Cum | 391 ₹19,550 | 150 ₹7,500 | 100 ₹5,000 | 100 ₹5,000 | 20 ₹1,000 Lowest | 150 ₹7,500 | 99 ₹4,950 |
| 5.00 | M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 45 | Cum | 3,191 ₹1,43,595 Lowest | 3,500 ₹1,57,500 | 3,500 ₹1,57,500 | 3,800 ₹1,71,000 | 3,800 ₹1,71,000 | 3,900 ₹1,75,500 | 3,800 ₹1,71,000 |
| 6.00 | M&L for brick work with sub class except "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 5 | Cum | 992 ₹4,960 | 1,850 ₹9,250 | 1,800 ₹9,000 | 1,500 ₹7,500 | 290 ₹1,450 Lowest | 3,900 ₹19,500 | 2,500 ₹12,500 |
| 7.00 | Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed by Engineer-in-Charge. | 2.5 | Per 1000 Nos | 1,000 ₹2,500 | 1,000 ₹2,500 | 100 ₹250 Lowest | 1,000 ₹2,500 | 190 ₹475 | 1,109 ₹2,772.5 | 1,000 ₹2,500 |
| 8.00 | M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. | 4,900 | Kg | 89 ₹4,36,100 | 75 ₹3,67,500 Lowest | 85 ₹4,16,500 | 78 ₹3,82,200 | 90 ₹4,41,000 | 99 ₹4,85,100 | 95 ₹4,65,500 |
| 9.00 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 311 | Sqm | 61 ₹18,971 | 40 ₹12,440 | 40 ₹12,440 | 35 ₹10,885 Lowest | 35 ₹10,885 Lowest | 45 ₹13,995 | 35 ₹10,885 Lowest |
| 10.00 | Demolition (reinforced) cement concrete of any description and in any position complete all as specified and directed by Engineer-in-Charge. | 13.2 | Cum | 1,000 ₹13,200 | 100 ₹1,320 | 100 ₹1,320 | 200 ₹2,640 | 40 ₹528 Lowest | 211 ₹2,785.2 | 100 ₹1,320 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
8 Oct 2025, 6:00 pmClosed
AGE I U B R
AGE I U B R Delhi Cantt
REPAIR/REPLACEMENT TO BOUNDRY WALL, FENCING OF INSTALLATION BUILDING UNDER THE AOR OF AGE E/S-I AND AGE W/S-I UNDER AGE (I) (U) B/R DELHI CANTT-10
2025_MES_730013_1
AGE(I)(U)B/R/T-28/2025-26
Open Tender
Civil Works
Item Rate
180 days
Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
AGE I U B R Delhi Cantt
₹80,000
Yes
27 Nov 2025
9 Sept 2025
11 Oct 2025
9 Sept 2025
8 Oct 2025
24 Sept 2025
Amount
Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement including water proofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tined) with silicon additives @ 1.43 Ltr/10 sqm over and including primer coats of exterior primer applied @ 0.90 Ltr/10sqm over new surface over a coat of primer (chalk whiting ) complete all as specified and directed by Engineer-in-Charge.
Dismantaling of brick masonry work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Chrage.
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class except "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed by Engineer-in-Charge.
M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Demolition (reinforced) cement concrete of any description and in any position complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches , not exc 1.5 m wide and n exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates), as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.
All as per item No. 13 above but 6 to 8 mm dia
M&L for Formwork to sides of flat concrete foundations, footings, bases of coullmns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work complete all as specified and directed by Engineer-in-Charge.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and sanchions complete all as specified and directed by Engineer-in-Charge.
M&L for RCC (nominal mix) concrete type B1 1:2:4, using 20 mm graded stone aggregate as in foundation including rafts footings , foundations beams, plinth beams, bases for coulmns etc basement slab, undereamed piles and mass concerte complete all as specified and directed by Engineer-in-Charge.
M&L for Reinforced cement concrete (nominal mix) of 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge..
Returning , filling in incl spreading levelling and well ramming and watering in layers n exc 25 cm complete all as specified and directed by Engineer-in-Charge.
M&L for Removing excavated material n.exc 50 m and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for 20 mm thick granite ( of any type ) work (table rounded and polished) in coloumn, jambs, brick pillars, over 15mm thick rendering in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.
Dismantaling posts or struts (steel or RCC) any section, embedded in cement concrete including taking out embedded portion of posts or struts and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.
Dismantaling wrought iron or mild steel work of any description complete all as specified and directed by Engineer-in-Charge.
Excavation in post holes (or similar holes) in soft/loose soil, each n.exc 0.50 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 1:3:6 (40 mm graded stone aggregate) in foundation filling and mass concrete etc including necessary formwork as ordered complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel works such as post and struts in fencing including cutting tops to shape as direted, drilling holes, notching for wire etc, including all necessary drilling boltinh or riverting etc and similar work, conforming to Fe-290,Gde-E-165, complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel round bars 10mm dia (Fe-410-W Gde E-250) quality- A or Fe 290 (gde E-165) and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.
Dismantling fencing wire mesh of any descripition, complete all as specified and directed by Engineer-in-Charge.
Supply only chain link fencing 100x100mm mesh with 4.00mm dia Mild steel galvanised wire, complete all as specified and directed by Engineer-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of mild steel binding wire (annealed) not less than 0.90mm dia, complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel screw bolts (machine made) 5.00mm to 10.00mm diameter of neck and length of bolt exc 5.0 cm and n.exc 10cm with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and directed by Engineer-in-Charge.
S&F of concentrina coil fencing with punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal complete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed by Engineer-in-Charge.
RIZCON (BID ID -3440573)
M/s Naresh Kumar Gupta & Co. (BID ID -3440935)
STAR CONSTRUCTION CO (BID ID -3440566)
LAIQ RAM VERMA (BID ID -3439746)
HARICHAND CONSTRUCTION (BID ID -3439377)
B. S BUILDERS (BID ID -3439947)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .