REPAIR/MAINT OF SOLAR LIGHT, GARDEN LIGHT AND CONNECTED WORKS AT VARIOUS ZONES AT MILITARY STATION TALBEHAT

Amount

Taking down old unserviceable light fitting of any type and wattage.

Supply, fixing and testing high performance LED Street Light fittings of 90 Watts with minimum 100 Im/watt, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm complete all as specified and directed. Make : Bajaj/Philips/Havells/Jaquar

Supply, fixing in replacement and testing high performance LED Flood Light fitting/luminaries of 180 Watts power consumption with minimum 100 Im/Watt, made out of cast aluminium hosing, hermitically sealed to achieve IP 66 ingress protection, optical compartment shall be provided with heat ressistant toughened glass, whilr control gear shall be provided with die cat alumininum cover for safety including multistage current constant voltage topology driver suitable to operate in input voltage range of 150V to 270 V (nominal rated voltage-240V) with minimum 3KV surge protection. Power factor greater than 0.90 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire complete all as specified and directed. Make : Bajaj/Philips/Havells/Jaquar

Supply, fixing and testing in replacement High performance LED Flood light fitting/luminaires of 15/20 watt power consumption with minimum 100 Im/wall, made out of die cast aluminium housing, hermitically sealed to achieve IP 65 ingress protection, optical compartment shall be provided with heat resistant toughened glass, while control gear shall be provided with die cast aluminium cover for safety including multistage current constant voltage topology driver suitable to operate in input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 3KV surge protection. Power factor greater than 0.90 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire complete all as specified and directed. Make : Bajaj/Philips/Havells/Jaquar

Repair only LED Solar street light fitting all-in-one type incl any component required to be replaced for 09 to 12 Watt, cleaning of panels, and wiring as required complete all as specified and directed.

Replacement of 12 V 12 Ah inbuilt battery, lithium ferro phosphate for solar street light. Make : Solar Universe India/UTL Solar/Liv Guard

Supply and fixing in replacement of LED Solar street light fitting 11/12 Watt 12 volt DC IP 65, including inbuilt 12V 12 Ah battery and auto lighting time sensor complete all as specified and directed. Make : Solar Universe India/UTL Solar/Liv Guard

Supply and fixing Solar light Panel 12 volt 50 watt complete all as specified and directed. Make : Microtek /solar.UTL Solar/Liv Guard

Supply, fixing and testing ALL-IN-ONE Solar street light with high efficiency mono crystalline solar PV module, Lithium Ferro phosphate battery with inbuilt BMS technology, high efficacy LED of 12 watts, MPPT solar charge controller & aluminium extruded body, with progressive intelligent dimming, backup for 02 days including mounting pole 6.0 m long, 50 mm dia med grade GI pipe with MS clamp and nut bolts and PCC complete all as specified and directed by Engineer-in-Charge. Make : Surya/Philips/Havells

Supply and fixing LED driver 72/90 watt for street lights/tricolour led strip light complete all as specified and directed.

Supply and fixing LED Panel 72/ 90 watt for street lights complete all as specified and directed.

Supply and fixing in replacement, street light bracket on RCC/Steel tubular pole made out of 40 mm dia bore G I Pipe light grade of length not less than 1.5 mtr bend to required shape for holding the fitting with providing the clamp nut, bolt and washer etc. of required size and 02 nos mild steel supporting clamps shall be made out of flat iron of suitable size of requisite length mild steel work shall be painted with two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed by Engr-In-Charge. Make of GI Pipe:- JINDAL, PRAKASH, TATA.

S&F LED post top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and Warm White IP-65 protection of 40 watt, 240 volt, 50Hz. Make : Jaquar/Philips/Havells

S & F in replacement of outdoor type decorative Tri-colour LED strip light (Orange+white+green colour) in single strip, 220-240 V minimum 15 mtrs length, plug and play type with IP 65 protection Note:- Repair of each letter will be measured separately

Repair of glow shine board on LED lights letters including taking down letters from glow shine board and refixing after repair and replacement of driver as required complete all as specified and directed by Engr-In-Charge. Note:- Repair of each letter will be measured separately

Repair of LED lights letters under item No. 15.00 and refixing the same as specified and directed

Supply and fixing rain proof LED driver 12 volt 200 watt complete all as specified and directed. Make CE RoHS cat No WCCEL- NF-12V-200W

Supply and fixing mount sturdy LED Bollard with warm white colour and excellent light out put through its PMMA widow ensuring maximum illumination aspect in surrounding garden light 10 Watt, inbuilt driver, IP 65, 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Philips/Zaquar

Supply and fixing. Hot press PVC moulded (Fire Proof) junction box of size 180mmx100mmx60mm, complete with two No. aluminium bus bar of size 100mmx30mmx05mm for phase and neutral, mounted in insulators, front opening door, locking arrangement and fixing with suitable size, incorner and outgoing cable by GI nuts, bolts and washers of suitable size and proper lugs incl making holes in bus bar.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

m/s bobby enterprises