RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Patient Care Beds For General Use ( 6 number ) 1/9 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) DIMENSIONS OF MATTRESS PLATFORM & FRAME Length of mattress platform & Overall length of bed >= 1900 mm & <=2000 mm >= 1900 mm & <=2000 mm
Required>=1950 mm & <= 2050 mm
Required>=2000 mm & <=2100 mm
Required>= 2050 mm & <=2100 mm
Required>=2100 mm & <=2150 mm
Required>= 2150 mm & <= 2200 mm
Required>= 2200 mm & <= 2250 mm Width of mattress platform 900 mm to 920 mm 900 mm to 920 mm
Required>920 mm to 950 mm
Required>950 mm to 1000 mm
Required>1000 mm to 1050 mm Material of mattress platform surface CRCA Sheet CRCA Sheet
RequiredSS Height of mattress platform 682 * Mattress platform surface thickness 1.2 mm and above * Type of mattress platform Perforated Perforated
RequiredWith Holes BED Overall length of Bed(in mm): 1900 * FRAME section
Requireddimensions
Requiredthickness and material MS ERW rectangular tube with 50 mmx30 mm or more
Requiredgauge 1.2 mm or more. * Frame width (in mm) 900 * Leg Shoe material - * HEAD AND LEG BOARD Height of Head board measured from mattress platform 350 * Material of Leg board and head board MS tubular SS laminated
RequiredMS tubular
RequiredPlastic Height of Leg board 350 * Pipe diameter of Head and Leg Boards 30 mm or more * Thickness of pipe of 1.2 mm or more * 2/9 Head and Leg board MISC Maximum Load Capacity must be >= 150 Kg Yes * Painting Powder coated Powder coated Colour of Bed Grey * Provision of I.V. poles Holder Yes * Provision of Mosquito net pole Holder Yes * Other details Drawing available on Web. No * If Yes
RequiredDrawing No. - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents