MISC REPAIR TO PATH HARDSTANDING BOUNDARY WALL, AREA DRAIN CLEANING AND CONNECTED WORK IN ZONE B AND C AREA OF AGE B/R-I UNDER GE (CENTRAL) KHADKI.

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for PCC 1:2:4 type B2 using 40mm graded aggregate as in fixing fencing post complete all as specified and directed.

Material and labour for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work and finished even and smooth without using extra cement complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out, in any type of soil complete all as specified and directed.

Returning filling in incl spreading , levelling watering and well ramming in layers n exc 25 cm thick (soil) all as specified and as directed.

Removing excavated material to a distance n exc. 50 mtr and depositing where directed at a level n exc.1.50 mtr above starting point complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix for mild steel framed work (Conforming to FE-290, Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fix Mild steel work as in fencing posts and struts, swan neck in fencing incl cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillets (for securing wire mesh) incl all necessary steel bars conforming to FE-410-O or FE-310-O incl one shop coat of primer zinc chromium complete all as specified and as directed.

Supply and fix for Mild steel screw bolts dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm & n.exc 10 cm long complete all as specified and as directed.

Supply and fix 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Dismantling fencing wire mesh, any type and size, complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specified and as directed.

Material and labour for pre-cast cement concrete solid block masonry with solid block of the grade C-1, (1:3:6) using 20mm graded aggregate set in CM (1:6) complete all as specified and as directed.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and as directed.

Description all as per item No 18 above but except stone.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as specified and directed.

Material and labour for Raised pointing to RR masonry in CM 1:4 brought up to course all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work block work stone work or concrete surfaces on walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of new surfaces (Plastered or un-plastered) of walls or RCC Jaffries and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered surface one coat with alkali resistant primer complete all as specified and directed. NOTE :- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat. (iii) height upto 15 mtr

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Supply and fix in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc all as specified and as directed. (each line wire to be measured)

Material and labour for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing granite or stone slabs of any type and position complete all as directed

Material and labour Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grad with grey cement and pigments over & including 40mm thick sand cushion and of approved design & pattern as approved by GE, set complete all as specified and as directed.

Material and labour for 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone agg) as in sub base all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs or mud stops slightly rounded or chamfered angles sides of path complete all as specified and diected.

Material and labour for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in floor, plinth protection, 100 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed.

Material and labour for excavatiing/desluding /desiliting as in liquid/dry mud/foul conditions of any type of any depth and cross section width 0.50m to 1.20m getting out from existing drain and cleaning the shrubs /grass from side of drain including removing existing RCC cover slab of any size and thickness and resetting in the same position and removing the sludge outside the defence land in covered container complete all as specified and as directed.

VP DEVELOPERS AND CONTRACTOR (BID ID -3294397)

MANIYA CONSTRUCTION CO (BID ID -3294600)

M/S KISHAN CONSTRUCTION (BID ID -3294460)

JP ENTERPRISES (BID ID -3292919)

S M MISHRA (BID ID -3294532)

S.R.M.K Enterprises (BID ID -3294112)

MAHESH DADAJI BACHHAV (BID ID -3293171)