Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC BEING 1ST LOWEST BIDDER | |
| 2 | L2₹17.5 L+₹99,569 (6.02%)Rejected-Finance | L2 | Rejected-Finance 2nd Lowest Bidder after deducting of Sch of Credit amt to Rs 39900/- |
Tender Value
₹18.1 L
EMD Value
₹36,200
Closing Date
3 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) DHAR ROAD
GE (ARMY) DHAR ROAD
PROVN OF 02 X STORE ROOM (SIZE 19 L X 15 W AND 23 L X 20 W ) FOR ASCON NODE RC PEAK OF 591 SUB GROUP AND REPLACEMENT OF GI SHEETS MISC WORK IN BLDG NO P-12 MAIN BLDG AT ASCON NODE RC PEAK OF 591 SUB GP UNDER (ARMY) DHAR ROAD
2023_MES_583460_1
8068/NIT-63/2022-23
Open Tender
Civil Works
Item Rate
180 days
RC Peak
As per tender Documents
6 documents required · 6 mandatory
₹500
GE (ARMY) DHAR ROAD
₹36,200
Yes
1 May 2023
28 Feb 2023
5 Apr 2023
1 Mar 2023
3 Apr 2023
14 Mar 2023
Amount
Surface dressing n exc 15 cm deep in soft/loose soil
Excavation in trenches, not exceeding 1.50m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in cement concrete in foundations, filling and mass concrete complete all as specified and directed.
M&L Reinforced cement concrete M-25 using 20mm graded aggregates in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
All as per item No 4 above but in columns
All as per item No 4 above but in beams, cantilevers, bressummers, lintels over 1.5m span
All as per item No 4 above but in Chajjas
M&L Reinforced cement concrete M-25 using 20mm graded aggregatesas in slab supported on walls, beam and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L Form work to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L Form work to sides of rough finished square, rectaungular or polygonal surfaces of pillars, posts, struts, piers, columns and stanchions.
M&L Formwork to sides and soffit of rough finished flat surfaces of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L Form work to rough finished flat surfaces of chullah hoods, chajjas, troughs and similar items in- cluding edges
M&L Form work to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item No 14 above but 6mm to 8mm dia
All as per item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups etc
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement with WPC 3% weight of cement complete all as specified and directed. (WPC shall be measured and paid separately)
Supply only integral water proofing compound,
M&L Rendering 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.
All as per item No 20 above but 10mm thick in CM 1:3 in Ceilings finished even and smooth without using extra cement.
M&L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.
M&L Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.
M&L Preparation of new plastered surfaces of wall and applying three coats of white wash on wall ceilings complete all as specified.
S&F Steel window made up of box steel section of 16 gauge MS Sheet in outer frame, shutter frame and centre frame, with fixed type partly glazed and partly gauzed with outer side glazed shutter and inner side wire mesh shutter fixed with suitable steel handle dovetailed or welded with each shutters pannels complete with necessary clit and stopper all as specified as directed.
S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.00mm
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for two coats of synthetic enamel paint on steel surfaces, over a coat of red oxide primer incl preparation of new steel surfaces 10cm in width or grith not ohter wise described complete all as specified and directed.
M&L 50mm thick Cement conrete type C2, 1:3:6 using 40mm graded stone aggregates for plinth protection laid in alternate panels (n exc 2 Sqm each) and finish even and smooth without using extra cement all as specified and directed.
M&L 75mm thick Cement conrete type D2, 1:4:8 using 40mm graded stone aggregates as in sub-base, sub-floors, floors etc complete all as specified and directed..
M&L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in 1:4
Kota stone slab 18-20 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified.
Returning filling in and including spreading levelling watering and well ramming in layers n exc 25cm thick.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.
Factory made, 35 mm thick 2nd class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.
Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.
S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified .
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long.
S&F aluminium handles cast type, anodised, 150 mm size complete, all as specified .
Roof treatment for non-accessible roof :- (a) 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound, (b) Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm top surface of roof after carrying out treatment as specified here-in-before shall be provided with 2 coats of aluminium paint over a coat of primer as per manufacturing's instructions complete all as specified and directed. Note:- WPC shall be measured and paid separately under respective item
M&L 40 mm thick PCC 1:2:4 nominal mix, type B-0, using 12.5 mm graded stone aggregate in two layers of 20 mm each MIXED WITH WATER PROOFING COMPOUND AS PER MANUFACTURER INSTRUCTIONS on roof surfaces, surface finished even and smooth without using extra cement, complete all as specified. Note:- WPC shall be measured and paid separately under respective item.3
S&F Chicken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified
M&L Termite treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square meter of vertical surface (area of the sub structure in contact with backfill to be measured)
M&L Termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface
M&L Termite treating the soil under plinth protection at the rate of 5 litres of emulsion per square meter of surface
Dismantling of Plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. FE-290 grade E-165 complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 incl wall for crumple joint complete all as specified and as directed by Engr-in-charge.
Taking down cement plaster incl raking out joints hacking for key scrubbing down with water, etc.
M&L for rendering 15 mm thick in CM 1:4 on fare face of brickwork or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound.
M&L for rendering 15 mm thick in CM 1:6 on fare face of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified.
M&L for aplly two coats of cement base paint over a coat of alkali resistant primer on newly plaster surface of walls incl preparation
Preparing plastered surfaces of new walls and applying two coats of oil emulsion distemper of approved tint on walls by using roller/spray complete all as specified and as directed by Engr-in-charge.
M&L one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
S&F false ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595X595 mm of thickness not less than 9 mm incl with GI powder coated frame angle / tee grid frame work for ceiling with following specification (a) S&F angle of side 25X25X1 mm powder coated (b) 25x25x1 mm GI powder coated at bottom tee as in main members (c) 25x25x1 mm thick GI powder coated at bottom tee as in cross members (d) S&F 1.6 mm dia GI wire suspenders along with adjustable clamps to maintain leveling incl fixing to ceiling fasteners manufactureres instructions complete. Make : VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN).
M&L for complete removal of existing treatment of wall, by scrapping, sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of oil emulsion distemper of approved tint over one coat of wall care putty 1 mm thick prepare the surface even and smooth on walls by using roller/ spray complete all as specified and as directed by Engr-in-charge.
M&L for complete removal of existing treatment of wall, by scrapping, sand papering or by using mechanical sander and applying two coats of cement base paint over a coat of alkali resistant priming all as specified and as directed by Engr-in-charge.
Material and labour for Point wiring complete with 1.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly incl MS/CI sunken box and leminated sheet cover for fixing of switches/sockets/regulators etc complete all as spd and directed for the following:-
One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.
One switch socket outlet point 3 pin 5 Amps on Independent board.
Material and labour for Point wiring complete with 2.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit Medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly incl MS/CI sunken box and leminated sheet cover for fixing of switches/sockets etc complete all as spd and directed.
S&F Angle lamp holder fixed on wall /ceiling all as directed by Engineer-in-charge.
S&F Bulk Head fittings 10 watt LED including LED lamp on wall all as directed by Engineer-in-charge.
Supply and fixing LED 9 Watt lamp , 240 Volt, 50 Hz lamp
Supply and Fixing LED 20 Watt light fitting Batten integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories complete all as specified and directed by Engr-in-Charge.
Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as directed by EIC
S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of aluminium paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. Clamps as required to fix on concrete / steel poles complete all as specified and as directed
Supply and fixing of Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete.
Supply and fixing Ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement such as nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd complete.
S & F ceiling rose Ceiling rose, PVC/polycarbonate, isolated body all as specified and directed.
S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.
S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.
S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.
S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed
Supply & Fixing medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.
Supply & Fixing SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to latest IS complete all as specified and directed.
Supply & Fixing MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.
Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.
M&L as in repair for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe light grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in soft/loose soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.
Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose
M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.
Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.
M/S PAWAN KUMAR ANAND
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .