SPECIAL REPAIRS TO BLDG NO P 197 BURR ROAD OF 55 COY ASC SUP TYPE D BUNGLOW NO 10 FERRE ROAD AND CERTAIN MINOR WORKS UNDER AGE BR I IN GE C KIRKEE

Amount

Taking down chowkats and frame n.exc 1.5 Sqm each (Door/window/Ventilator ) including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 sqm each resecuring, easing, adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing, adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

Taking down shutter of any description n.exc 1 sqm each and removing to store complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and as directed.

S&F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, with and including PCC 1:2:4 type B0 (using 12.50mm graded stone agg) to fill in the frame & making good complete all as specified and as directed.

S&F 35 mm Factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed/gauged and skelton door shutter, factory made, open rebated and prepared to receive glass/gauged etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/gauged etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed.

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

M&L timber, 2nd class hardwood, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 15 Sqcm but n. exc 25sqcm. Including dismantling existing, complete all as specified and as directed.

S&F 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match as in cupboard door shutters complete all as specified and as directed.

S&F in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood leeping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and as directed.

S&F in repair 100mm Hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 100mm long stainless steel medium weight but hinges for door shutter and frames/welded to frames complete all as specified and as directed.

M&L 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

M&L 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

M&L for factory made solid PVC double moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawings.

S&F 75mm long stainless steel medium weight butt hinges for door shutter and frames complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.

S&F aluminium anodised handle cast type of size 150mm, fixed with screws complete all as specified and as directed.

S&F three track aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel wire cloth including all standard fittings complete all as specified & as directed.

M&L Machine cut cudappa stone slab 20-25mm thick as in Shelf/cooking platforms laid vertical or horizontal and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing Shelf/cooking platform complete all as specified and as directed.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and as directed by Engr-in-Charge

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of wrought iron complete all as specified and directed.

M&L preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and as directed.

M&L preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for including removing of debries all as specified and as directed.

M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete or as in sub base of floor complete all as specified and as directed.

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of sunken surfaceproviding 10 mm thick rendering in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof. (c)GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall complete all as specified and as directed.

M&L taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 12mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 complete all as specified and as directed.

M&L 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces and applying two costs of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces and applying two costs of oil bound distemper complete all as specified and as directed.

M&L three coats of white wash on walls including preparation of old decorated surface complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of wall, and applying two coats of cement base paint (white or tinned) over a coat of alkali resistant primer complete all as specified and as directed.

M&L preparation of old plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and as directed.

M&L applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

M&L two coats of white wash on ceiling including preparation of old decorated surface complete all as specified and as directed.

M&L cement concrete type B1 1:2:4 (20mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rouinded for chamfered angles and throating complete all as specified and as directed.

Dismantling existing PVC water tanks, exc 250 ltr and n exc 500 ltr removing to store complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 litres capacity triple layered cylindrical vertical with top closed hoisted and fixed in position complete all as specified and as directed.

S&F in repairs 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20 mm dia Ball valves, high pressure with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.

Labour only for Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Labour only for Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

S&F in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. (Make: Prayag Cat Part No 8308 or techno commercially equivalent makes specified in PS.)

S&F in repair angle stop valve cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.(Make Prayag Cat Part No :8310 or techno commercially equivalent makes specified in PS.)

S&F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and as directed.

S&F in repairs Stop valve (Concealed) cast copper alloy chromium plated fancy type screw down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed. (Make Queens Jaquar Cat Part No QQT-7053 or techno commercially equivalent makes specified in PS.)

S & F in repairs CP shower rose 100mm round with arm and flange including fixing to steel pipe fixed in repairs as directed. (Make Jaquar Cat Part No OHS-1989 or techno commercially equivalent makes specified in PS.)

S&F in repair for stainless steel kitchen plate rack SIZE (24"X36"X10") three tire ISI marked including all fittings all as specified and as directed by Engineer-in-charge.(Make: Prayag Cat Part No.P-336 or techno commercially equivalent makes specified in PS.)

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pully, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS complete all as specified and as directed.

M&L Black Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing cill/cooking platform complete all as specified and as directed.

S&F in repairs for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete all as specified and directed.

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection to union pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

S&F 32 mm bore PVC waste pipe of approved make suitable for WHB, Sink, Urinals etc all as specified and as directed.

S&F Grating doom 125 mm dia with or without waste hole of SS complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guities embeded in cement mortar (1:3) with steel screws etc, complete all as specified and as directed. (Make : Jaquar Cat part AQN-7711)

S&F 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

S&F 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any type of cement mortar complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed.

M&L non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick average thickness in cement mortar (1:6), complete all as specified and as directed.

M&L non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Glazed ceramic colour tiles in vertifical surface 300x600x7-8mm thick and 450x350x7-8mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 all as specified and as directed.

M&L machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

M&L machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

S&F in repairs Stainless steel fancy type curain rod 25 mm dia including SS brackets, decorative knobs, and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

S&F in repair Smart Shelf (12'') of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.(Make: Prayag Cat No. 190 or techno commercially equivalent makes specified in PS)

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.(Make: Prayag Cat No. BA-25 or techno commercially equivalent makes specified in PS)

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) laid in panels surface finished even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in subbase over rammed earth complete all as specified and as directed.

M&L 25mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 80mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement no pigment confirming to IS 15658-2006 complete all as specified and as directed.

Removing old tar felt, all loose dirt, old roof tiles, including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and M&L for rendering 15mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement finishing even and smooth without using extra cement over and including applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated sheeting any gauge thickness including AC sheet , Nainital or similar pattern as in roof covering complete all as specified and as directed.

Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work complete all as specified and as directed.

S&F timber work second class hard wood clean sawn in scantlings, complete all as specified and as directed.

M&L for preparation surfaces of wood and wood based material, new or old of any description and girth and treated with two coats of creosote complete all as specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with coach screws complete all as specified and as directed.

Fixing only asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with coach screws complete all as specified and as directed.

S&F for plain, galvanised mild steel sheeting in ridges hips valley gutters drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and directed.

S&F for E-board 'Everest' make 595x595x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including taking down wall/ceiling boards(fibre, pulp insulation etc) or insulation boards any thickness including fillets complete all as specified and as directed.

Taking down and re-fixing for old existing 4mm thick Non asbestos fibre cement building boards prepainted in white colour (E-board) (size 600x600mm), including or laid/ inserted to timber/GI/Aluminium framework with screws and making good as per complete as specified and as directed.

M&L for rendering 10mm thick plaster in cm (1:6) on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L complete removal of existing treatment on old plastered wall surface, and applying plaster of paris putty of avarage 10 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of lustre interior paint over one coat of alkali resistant primer complete all as specified and as directed.

Removing old paint complete by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and material and labour for applying French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

S&F in repairs Floor mounted coupled WC, bowl for coupled WC with PP soft close seat cover, Hinges, fixing accessories set, size 410 x 720 x 800mm, P or S trap 180mm, Cistern with cistern fittings all as specified and as directed.

S&F in repairs wall mixer with Provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges 15mm dia all as specified and as directed. (Make: Queens Jaquar Cat part No. QQT-7273UPR )

S&F in repairs centre hole basin mixer (Cat Part No QQT-7167B Make : Queens Jaquar) chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and as directed.

S&F in repairs Bib tap 15 mm bore, brass CP, with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.(Cat part QQT-7037 of Make : Queens Jaquar)

S&F in repair 2-way bib cock with wall flange all as specified and directed. (Make: Jaquar Cat Part No QQT-7041)

S&F in repair sink cock with regular swinging spout (wall mounted model) with wall flange all as specified and as directed. (Make : Jaquar Cat Part No QQT-7347)

S&F in repairs Towel rack 600mm long with lower hangers, stainless steel, complete all as specified and as directed. (Make : Jaquar Cat part No. AKP-35781PS)

S&F rotational moulded polyethylene water storage tanks 1000 lts capacity, Triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

M&L Vitrified Ceramic tiles dark shade, ultracharged designed 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in CM 1:6 set and joined in neat cement slurry and pointed in white or coloured cement to match dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

S&F in repair cast iron floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply only Sheet glass, 5.50mm ordinary quality, in squares exc 0.5 sq. m each pane, fixing in aluminium frames complete all as specified and as directed.

S&F in reapir Boarding, fixed with nails in any situation 25mm thick hardwood Plained one side and edges tongued and grooved or rebated as in cupboard and cabinets complete all as specified and as directed.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repair looking mirror made of 6mm glass and and fixed with brass screws and cap in wall complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions specified separately ) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sq.mm (nominal area) drawn in and including PVC casing and caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one light point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 Nos of cadmium coated screws and cup washers on existing MS concealed box for mounting of switches, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed.

All as per Sl Item No. 137 above but one fan / exhaust fan point with cables 1.5 sq.mm size.

All as per Sl Item No. 137 above but one bell point with cables 1.5 sq.mm size.

All as per Sl Item No. 137 above but one three pin 5 Amp socket outlet point with cables 1.5 sq.mm size on independent board.

All as per Sl Item No. 137 above but one three pin 5 Amps socket outlet point with cables 1.5 sqmm size on same board.

All as per Sl Item No. 137 above but FRLSH stranded copper cable of size 2.5 sq.mm for 3/6 pin socket outlet 15 Amps on one independent board alongwith all fittings and accessories.

Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH copper conductor cable of size 4.0 sq.mm drawn through in and including PVC casing caping of size with all accesories and one single core green colour FRLSH copper conductor cable of size 4 sq.mm as earth wire and connected to earth dolly, including taking down existing and making good to disturbed surfaces complete all as specified and as directed. NOTE:- Two runs of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM)

Supply and fix 5 Amps switch piano, flush type, single pole, one way all as specified and as directed.

Supply and fix 5 Amps bell push, flush type all as specified and as directed.

Supply and fix lamp holder of PVC/ polycarbonate type with back plate all as specified and as directed.

Supply and fix socket flush type 6 Amps, 5 pin, 230 volts all as specified and as directed.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps 230 volts all as specified and as directed.

Supply and fix ceiling rose surface bakelite three terminals all including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix call bell electric, ding dong, AC 240 volt, 50 Hz. including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix flush type electronic fan regulator with 5 step type, 240 Volts AC, 50 Hz all as specified and as directed.

Supply and fix MCB distribution board, IP 43 protection, double door, metal enclosure, SPN, 230 Volts, 8 way all as per Cat Part No- 6077 11 of Legrand or techno commercially equivalent models in Schneider/ABB including dismantling / taking down un serviceable one all as specified and directed.

Supply and fix MCB DB double door 4 way VTPN with 200 Amps rated bus bar 240 volts all as specified and as directed.

Supply and fix MCB TPN 40-63 Amps, 415 volts 10 KA all as specified and as directed.

Supply and fix MCB, double pole, 6 to 32 Amps, 415 Volts, 10 KA breaking capacity, ‘’C” curve all as per Cat Part No- 4086-28 to 4086-36 of Legrand or techno commercially equivalent models in Schneider/ABB including dismantling / taking down un serviceable one all as specified and directed.

Supply and fix MCB, single pole, 6 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve all as per Cat Part No- 4085-87 to 4085-95 of Legrand or techno commercially equivalent models in Schneider/ABB including dismantling / taking down un serviceable one all as specified and directed.

Supply and fix LED light batten 20 watt, 4 feet, AC, sleek and seamless profiled extruded aluminium / polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as per Wipro Cat part No-LL20-221-XXX-65NE3 or techno comercially equivalent models in Philips/Havells all as specified and as directed.

Supply and fix LED light batten 10 watt, 2 feet AC, sleek and seamless profiled extruded aluminium/polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as per Wipro Cat part No-LL20-111-XXX-65NE3 or techno comercially equivalent models in Philips/Havells all as specified and as directed.

Supply and fix LED lamp 9 watt, CDL, E-27 230V, PF-0.95 (min) . Make- CG / Havells/Bajaj/ Philips all as specified and as directed.

Supply and fix LED building security light 20 watt, 230 Volts complete with all accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable, one GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamp and fasteners all as per Wipro Cat part No- LR02-261-XXX-57-XX or techno comercially equivalent models in Philips/Havells all as specified and as directed.

Material and labour for rewinding of ceiling fan 1200/1400 mm sweep after dismanting complete motor assembly, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, varnishing, replacement of un serviceable bearings / bushings, assembling of motor and stator unit with capacitor, connecting wire, down rod, blades and testing complete all as specified and as directed. NOTE:- 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repairs, cost of transportation will be included in quoted rate. 2. Spares required for replacement of bearings, bushing, capacitor shall be measured and paid separately as supply and fixing only. 3. Cost of Connector bock and capacitor holder shall be included in the quoted rate.

All as per Sl Item No. 161 above but exhaust fan 280/300mm sweep size.

Supply and fix ball bearing No 6201 /6202 / 6203 / 6204 of SKF / Tata / NBC all as specified and as directed.

Supply and fix capacitor AC for 230 volts 50 Hz of capacity 2.0 / 2.25 / 2.5 Mfd all as specified and as directed.

Painting of ceiling fan 1200/1400 mm including scrapping, cleaning and removing dust from the blade on body and applying two coats of synthetic enamel paint over one coat of primer all as directed.

Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting, made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion all as specified and directed.

Supply, laying and testing of UG cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 16 sq.mm, 4 core including taking down the existing unserviceable cable complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft disintegrated rock all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick all as specified and as directed.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Material and labour for brick protection with sub class 'B' brick for UG cable all as specified and as directed.

Material and labour for point wiring complete with 1.5 sq.mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sq.mm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets,bell push and fan regulators complete including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed by Engineer-in-Charge. for the following:- (a) One light point /fan/exhaust fan/bell point controlled by one switch.

(b) One 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 sq.mm nominal area

(c) One 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 sq.mm nominal area.

(d) One 3 pin socket outlet 15/16 Amps independent board with cable of size 2.5 sq.mm nominal area.

(e) One 3 pin socket outlet 15/16 Amps independent board with cable of size 4 sq.mm nominal area.

Supply and fix modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/Legrand (myrius)

Supply and fix modular bell push, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crabtree(Athena/, Havells(Oro)/ Anchor(Vision)/Legrand (myrius)

Supply and fix modular socket, 5/6 Amps, 2/3 pin combined 2 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crabtree(Athena)/ Havells(Oro)/ Anchor(Vision)/ Legrand (Myrius )

Supply and fix modular switch 1 way, 16 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crabtree(Athena)/ Havells(Oro)/ Anchor(Vision)/ Legrand (Myrius )

Supply and fix modular socket, 6/16 Amps, 2/3 pin combined 2 module (ISI marked).complete all as specified and as directed. Make: Crabtree(Athena)/ Havells(Oro)/ Anchor(Vision)/ Legrand (Myrius )

Supply and fix modular type fan regulator 100 Watta - 2 module complete all as specified and as directed. Make: Crabtree(Athena)/ Havells(Oro)/ Anchor(Vision)/ Legrand (Myrius )

Material and labour for for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6 sq.mm (nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6 sq.mm as earth lead and connected to earth dolly including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE:- (a) Two runs of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Supply and fix Sheet metal enclosure SPN 12 way (MCB DB) double door, 240 Volts AC of Make Schneider /ABB/Legrand all as specified and directed.

Supply and fix LED building security light 20 watt, 230 Volts complete with all accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable, one GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fasteners all as specified and directed by Engr-in-Charge. Make-CG Cat Part No LSTS-20-CDL-M or equivalent in Philips/Bajaj/wipro

Supply and fix LED post top lantern 20 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. Make: Wipro/Philips/Crompton Greaves.

Supply and fix LED security fitting 45 watt with LED driver and lens complete with suitable size bracket made of GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm two core copper flexible conductor cable from junction box of pole incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. Make: Wipro Cat no: LR02-501-XXX-57-G1 or equivalent in Philips/Crompton Greaves.

Supply and fix LED garden light, efficient light distribution of 10/12 watt ,230 Volt AC including all fittings i.e PVC Conduit of required size,1.5sqmm wire lenght required at the site , necessary Excavation & PCC work complete all as specified and directed by Engr-in-Charge. Make : Wipro / Philips/Crompton Greaves.

Material and labour for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sqmm (nominal area) drawn through in and including PVC casing caping/PVC conduit of suitable size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two runs of cable with one run of earth wire and one run of casing capping/conduit will be measured as one unit length for payment purpose.

Supply and fix circular LED highbay with tapered finial design and excellent thermal management along with IP 66 protection, reliable / suitable for ceiling (surface/suspende ) mounted type complete . all as per CG Cat Part No- LHB11-140-CDL/60-M or techno commercially equivalent models in Philips, Havells and Bajaj including dismantling / taking down un serviceable one all as specified and directed.

S.R.M.K Enterprises

Veekay Enterprises

V.R.PRAJAPATI AND CO.

Vastushilpa Contrustion

ShreHari Civil Enginneering and Contractors