Providing internal and external painting to Girls Hostel Block-4 (SHARAVATHI) building, in NITK.

Amount

Painting Work: Plastic with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on wall and ceiling surface after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all materials, labour, complete as per specification and directions of Engineer in charge.

Repairs to buildings works: Cleaning and washing the external wall / sloping roof surface spoiled by fungus, smoke, soot, by using jet machine, wire brush with clear water and papering the surface even and sand paper smooth including cost of all material, labour, machinery scaffolding at all levels and heights etc complete as per specifications.

Painting Work: Providing and applying painting with External emulsion paint with one coat of approved brand (Asian Apex / Berger, Dulex, Nippon equivalent make) to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter Including cost of preparing the surface even and sand paper smooth with necessary repairs to scratches in wall /sloping roof surface with putty etc at all levels and heights including cost of all materials, labour, complete as per specifications & Direction of Engineer incharge.

Painting Work: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One coats on old wood surface after cleaning oil grease, dirt and other foreign matter including cost of all materials, labour etc complete as per specifications and directions of Engineer in charge.

Painting works: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One coats on Steel surface with one coat of primer after scraping, cleaning oil, grease, dirt and other foreign matter including cost of all materials, labour etc complete as per specifications and directions of Engineer in charge.

Finishing works: Polishing in high gloss/matt finish melamine clear polish on wood work in required color /wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

SONU CONSTRUCTION (BID ID -3236995)

SUDHIR ELECTRICALS (BID ID -3237227)

Komere Manoj Kumar (BID ID -3237089)

sanjeeth (BID ID -3232290)

Narayan s (BID ID -3234054)

MOHD AKRAM (BID ID -3236352)

WASEEM AHMAD (BID ID -3235055)

umar anees (BID ID -3236063)

MOHD. SHAHNAWAZ (BID ID -3236300)

DREAM HOME CONCEPT (BID ID -3237041)

CHHAJWA CONSTRUCTION CO (BID ID -3233797)

MARUTHI ENGINEERS (BID ID -3236555)