Construction of Boundary Wall and Renovation Work of Shiv Dharamshala in Mo. Shyam Nagar Ward at Nagar Panchayat Atsu.

CONSTRUCTION OF DRAIN ALONG WITH BOUNDARY WALL(OUTSIDE)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). As per SI 13.47.1

BOUNDARY WALL

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coradse aggregate and fine aggregate derived from natural sources, portland/pozzolona/ordinary portland/ portland slag cement, admixture in recommonede proportion as per IS:9103 to accelerate/ retard setting of concrete to improve durability and workability without imparing strenght including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of engineer-in-charge Concrete of M30 grade with minimum cement 350kg/cum

First class brick work in 1:4 cement and COARSE sand of mortar in super structure including supply of all materials, labour and T&P etc. required for proper completion of work. 9" thick wrick work

15 mm cement plaster (1 Cement:3Coarse Sand) in single coat on fair side of single or half brick wall for interrior plastering includign arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in girth and finished even and smooth. As per SI 10

12 mm cement plaster (1 Cement:3Coarse Sand) in single coat on fair side of single or half brick wall for interrior plastering includign arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in girth and finished even and smooth. As per SI 10

Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. (Make TATA/JINDAL/SAIL or Approved by Enc.)

COST OF HIGH MAST LIGHT, SOLAR LIGHTS ,SOLAR POWER PLANT & SUBMERCIBLE PUMP

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). As per SI 13.47.1

SUBMERCIBLE PUMP

Cost for bench (M.R.)

Electric Work 10%

Please Enable Macros to View BoQ information