Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-AOC PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹16.4 L+₹1.2 L (7.78%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹16.2 L
EMD Value
₹32,400
Closing Date
2 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Navy Chennai
AGE(I) Navy Chennai Military Engineer Services Fort St George Rajaji Salai Chennai 600 009
ADDN AND ALTERATION TO DUTY ROOM ALONGWITH TOILET FOR QRT NEAR MAIN GATE BLDG NO. P-32 AT INS ADYAR UNDER AGE(I) NAVY CHENNAI
2023_MES_621198_1
AGE(I)/NAVY/CHN/8456 of 2023- 24
Open Tender
Civil Works
Item Rate
120 days
Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
AGE(I) Navy Chennai
₹32,400
Yes
21 Nov 2023
30 Sept 2023
4 Nov 2023
30 Sept 2023
2 Nov 2023
14 Oct 2023
2 Oct 2023 - 7 Oct 2023
Amount
Dismantling/chipping of Existing RCC Col /beams of any description and in any position not otherwise specifically provided for complete all as specified and as directed
Dismantlig of Brickwork of one brick layer built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
M&L for RCC M-30 design Mix (using 20mm graded agregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed
M&L for RCC M-30 design Mix (using 20mm graded agregate) as in lintel Beams, cantilevers, bressummers, lintels over 1.5m span including chajjas etc complete all as specified and as directed
M&L for RCC M-30 design Mix (using 20mm graded agregate) as in slabs supported on walls, roof beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed
M&L for RCC M-30 design Mix (using 20mm graded agregate) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed
M&L for formwork to sides of concrete roof beams, sides soffits of lintel beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed
S&F for drilling the holes of required diameter & depth, cleaning of the same providing/filling the hole with high strength polyester resin anchor grout of (Lokfix S of FOSROC) make inserting reinforcement bars to RCC Col/ beams etc complete as per Manufacture instruction. The work shall be carried out by the technical workmens/agency approved by the manufacture and under technical supervision of Manufacture of injuction grount including all materials, tool tackles, labours etc complete For 16mm dia (Holes will be 20mm dia to depth 300mm) Note :-(Reinforcement bars shall be paid extra under relevent items of work)
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and hooking ends and throughout welding with existing reinforcement or where required and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified and as directed
S&F mild steel TMT bars 6 mm dia over upto and including 10 mm dia in strrups, spaces and binders and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified and as directed
M&L for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
All as per SL item No. 13 above but for half brick thick walls built in CM (1:4)
Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed
M&L glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.
S&F Vitrified dark shade ceramic tiles 10 mm thick (square/ rectangular) of double charged, area of each tile exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match ncluding 15 mm thick screed bed in CM 1:6.complete all as specified and directed
All as per Sl item No. 18 above but as in skirting/ dado including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.
M&L for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)
Supply only Integral water proofing compound complete all as specified and as directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed
M&L for 10 mm thick rendering in CM (1:3) on ceiling on soffits and top of roof slab and finised even and smooth (without using extra cement) complete all as specified and directed
M&L for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over one or more coat of birla wall care putty complete all as specified and directed. Make :- Interior grade acrylic emulsion shall be of the make : Asian paints "Premium Emulsion", Nerolac Paints "Beauty Gold Acrylic Emulsion, ICI Dulux "Super Smooth Acrylic Emulsion, Berger " Rangoli Acrylic Emulsion or equivalent as specified in PS.
M&L fo Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 2mm thick exterior birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. The makes of exterior grade acrylic emulsion shall be : Asian Paints " Apex Ultima", Nerolac paints " Excel Anti Peel Emulsion", ICI Dulux " Weather Shield Max / Ultra Clean Emulsion", Berger"Weather Coat All Guard Emulsion" or equivalent as specified in PS
M&L for Preparation new plastered surfaces plastered and applying three coat of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over one or more coat of birla wall care putty and including necessary scaffoldings as reqd etc complete all as specified and directed . Make :- Interior grade acrylic emulsion shall be of the make : Asian paints "Premium Emulsion", Nerolac Paints "Beauty Gold Acrylic Emulsion, ICI Dulux "Super Smooth Acrylic Emulsion, Berger " Rangoli Acrylic Emulsion" or equivalent as specified in PS.
M&L for complete removal of existing treatment on walls including washing down, rubbing down and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 2mm thick exterior birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. The makes of exterior grade acrylic emulsion shall be : Asian Paints " Apex Ultima", Nerolac paints " Excel Anti Peel Emulsion", ICI Dulux " Weather Shield Max / Ultra Clean Emulsion", Berger"Weather Coat All Guard Emulsion" or equivalent as specified in PS
S&F Aluminium powder coated frame with shutter doors , windows and ventilators including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.
S&F for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.
S&F aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.
S&F 4 mm thick sheet glass figured glass, pin head ,obscured or frosted, on one side type and aluminium glazing beads in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 100mm long Mortice lock with four levers (vertical type), Brass body and fixed complete all as specified and directed
S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg aluminum die cast body complete all as specified and directed
S&F rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) including all fittings i.e tank nipple, of 25mm dia Ball brass valves, high pressure, with polythene float and flynut etc make- SINTEX hoisted and fixed in position complete all as specified and directed.
S&F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
All as per Sl item No. 37 above but for 25 mm dia
S&F PPR gate valves (brass insert) outer dia of pipe 20 mm complete all as specified and directed.
All as per Sl item No. 39 above but for 25 mm dia
S&F PVC pipe 110mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 6mm dia round iron stays every 1mtr , including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F PVC pipe 75mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F PVC (SWR) bends any radius bore of dia 110mm with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius bore of dia 110mm complete all as specified and directed.
S&F PVC (SWR) bends any radius bore of dia 75mm with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius bore of dia 75mm complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for Concrete bed to drain pipes including packing under, & completely surrounding pipes with concrete after they are laid & tested in cement concrete (1:3:6) type C-2 bore of pipe 200 mm dia.
M&L for pre cast factory made heavy duty 75 mm thick 450mmx900mm size of manhole cover setting in cement mortar 1:3 and flaunching with cement concrete (1:2:4) type B1 including 8mm dia steel bars @ 150c/cboth ways complete all as specified and as directed.
S&F for EWC Single piece incl flusing cistern of size690x360x640mm, vitreous china of one piece including cutting for and pinning in ends of fixing or erecting stand inclusive of waste pipe and seat cover and P / S Traps etc complete all as specified. Make Jaquar Cat Part No- SLS-WHT-0208
S&F Stainless steel health faucet 15 mm dia and 1.00 mtr long Flexible tube iand wall hook for fixing to walls complete all as specified. Make -Jaquar Cat Part No ALD-573 or equivalent as specified in PS
S&F for SS Toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.
S&F Wash basins, vitreous china (flat back or angle back type) of 550 x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified.
S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. .
S&F for 15mm dia long body Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed complete all as specified and directed.
S&F Angle/ stop valve15 mm dia of CP any colour high pressure screwed for iron pipe and fixed.complete all as specified and directed.
S&F 15mm dia CP fancy type Bib taps of chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F CP tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete
S&F factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete
S&F butt hinges 75mm size, Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.
S&F aluminium handles cast type anodised for 100 mm all as specified and directed.
S&F aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.
M&L for 18-20 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in steps,jambs, pillars, windows, cills, cooking plateforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink complete all as specified and as directed.
M&L for 10mm thick rendering on roof top surfaces in CM 1:3 with using with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement. Finishing the even and smooth surface etc complete all as specified and directed. Note :- Integral waterproofing compound Conplast WL will be measured paid sepatarely.
Supply only Liquid waterproofing compound Conplast WL
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over a tack coat of hot bitumen 85/25 @1.2kg/sqm over compitable primer at 0.40 ltr/sqm after fixing of APP membrane and clean the surface on top and applying two coat of Aluminium paint etc all as per instructed manufacturer instructions and work to be carried Authorized applicator complete all as specified and directed.
S&F Hangers 6 mm dia G.I(upto 1200 mm length) adjusting level fixed to roof slabs by means ofceiling cleats made out of G.I) flats 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.
S&F Anodised aluminum snap grid frame work as required grid (size of grid 605x605 mm) ceiling all as speciifed.
M&L for 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws for fixing in 600 mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.
M&L for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit
M&L for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit
M&L for point wiring (concealed) foe One light point controlled by one switch on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.
All as per Sl item No. 77 above but for One fan point controlled by one switch
All as per Sl item No. 77 above but for One switch socket outlet modular type 3 pin 6 amp on same board.
All as per Sl item No. 77 above but for 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.
All as per Sl item No. 77 above but for 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
S&F Switch modular type, single pole one way 6 Amps
S&F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.
S&F socket modular type 6 Amps multistandard 240 volts all as specified and as directed.
M&L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.
S&F switch modular type 16 Amps, 240 volts all as specified and as directed.
S&F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.
S&F for Modular white cover plate with frame,3 Module
S&F for Modular white cover plate with frame,6 Module
S&F for Modular Metal flush box,3 Module
S&F for Modular Metal flush box,6 Module
S&F wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.
S&F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.
S&F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.
S&F MCB SP 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.
S&F 2 core 1.5 sqmm PVC insulated PVC sheathed weather proof multistranded Copper conductor cable 1100 volts grade including in PVC conduit 20 mm complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.
Taking down old unserviceable UG cable and Supply & Laying cable XLPE insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.
BESPOKE ENGINEERING
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .