Repair and maintenance of anganvadi at Kamaraj nagar ward-2 in Bhavani municipality

Dismanteling of plain cement concrete and clearing away from site including all charges as per directed by departmental officer.

Brick work in cement mortar 1:5 mix (one cement and five sand) using second class ground bricks of size 23cm x 11cm x 7cm including cost, conveyance of all materials at site and all labour charges and incidental charges etc., complete as per standard specification

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Supply and fixing of cuddapah slab of required size and thickness of 20/30 mm thick including cost of materials and labour charge. complete as per standard specification

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulatedpanels with external 0.50mm total coated thicknesspre painted Galvalume sheet with trapezoidal roofingprofile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thicknesspre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluorocarbon and hydro chlorofluoro carbon free, highperformance rigid polyurethane foam (PUF) conformingto IS 12436 having density not less than 40±2Kg/M3,Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessoriessuch as screws ,fastners ,sealants etc for fixing the paneletc., complete complying with standard specification.50mm (+38mm) thick PUF roof panel

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats with ready mixed plastic emulsion paint of First class quality of approved colour etc., over plastered surface including priming coat and cost and conveyence of all meterials etc., complete as per standard specification.