REPAIR/REPLACEMENT OF ELECTRIC AND FIXTURES, DBs, WIRING, SUB MAIN, EARTHING ETC. REPAIRS/OVERHAULING OF CEILING FANS, EXHAUST FANS, WALL FANS, AIR CIRCULATORS AND GEYSER AND ALLIED WORKS AT BLOCK A , BLOCK B, MD ACCN COMPLAINT CELL, AT MH UNDER AG

Amount

Material & labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated FRLS copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings:- (Rate for cutting chases of walls all are included in the quated rate)

(a) One light point or one fan point or bell point controlled by one switch or bell push

(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 1 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor FRLS cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in Existing PVC concealed Conduit Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC FRLS insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light point or one fan point or bell point controlled by one switch or bell push

One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 3 here in before but with 2.5 Sqmm nominal cross sectional area FRLS copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, FRLS PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in open conduit/casing caping of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light point or one fan point or bell point controlled by one switch or bell push

One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 5 here in before but with 2.5 Sqmm nominal cross sectional area FRLS copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch board including modular metal flush box with white suitable cover plate with frame as per site requirment. two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing for the following. [Note:- cutting chasis of walls and making good surface to as exiting are included in the quated rate)

One light point or one fan point or bell point controlled by one switch or bell push

One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 7 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, FRLS PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Taking down carefully copper/aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.

S & F Modular Switch 1 way 6 A, 1 module

S & F Modular Switch 1 way 16 A, 1 module

S & F Modular Socket 6 A, 2/3 pin combined 2 module

S & F Modular Socket 15 A/ 16 A, 2/3 pin combined 2 module

S & F Modular Fan step regulator, 120 watt, 2 module

S & F Modular Bell push 6A, 1 module

S & F Modular Blank plate, 1 module

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed .

Supply & fixing of bell push, flush type 05/06 Amps, 240 volts complete all as specified & directed .

Supply & fixing bell, AC, 230 volts, single pole, ding dong type size compete all as specified & directed.

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing ceiling fan regulator, electronic, type, rotary 0 to 04 steps, hum free, AC, 230 volts, 100 watts duty ISI Marked with and including modular white surround complete all as specified & directed.

Supply & fixing lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

S & F in replacement hanging switch board including accessories/fittings, brass screws, washers etc, alongwith Sunk Zinc coated pressed steel terminal boxes as per site requirment. including all cutting/chases etc in walls, making good to walls to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing. [Note: - cutting chases of walls and making good surface to as exiting are included in the quated rate)

All as per srl No 26 here in before but 05/06 independent switch board including Sunkk Zinc Coated steel teminal Boxes

All as per srl No 26 here in before but 15/16 independent switch board including Sunkk Zinc Coated steel teminal Boxes

S&F 10 watts Light emitting Diode (LED) tube light fitting wall mounting, indoor PC LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 2' long, easy to install, Efficiency:100 lumen/watt, Minimum 3.5 KV Voltage Surge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting, indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install, Efficiency:100 lumen/watt, Minimum 3.5 KV Voltage Surge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S & F Recess mounted economical LED panel light 2`X2` 36 watt with high effciency, efficiency 110 lumen/watt LED luminaires LED luminaire made in CRCA sheet metal with wider light window and opal polystyrene diffuser for spotless glare-free uniform lighting complete all as specified and directed.

S&F LED 10 watts wall bracket light aesthetically designed wall bracket light with B22d Lamp holder and bulb as per sample complete all as specified and directed.

Supply and fix in repair LED post top for gate light 45 Watt with spun aluminium housing and pressure die-cast spigot. Clear polycarbonate diffuser for uniform bright light,CCT 5700K, with IP65 degree of protection & impact resistance complete all as specified and directed.

Supply & Fix in replacement LED Emergency LED linear Lamp, Wattage 10W, Voltage /frequency 220-240V/ 50-60Hz, Cool Day light, PF > 0.9 CCT 6500K, upto 4 Hrs Back up all as specified and directed by Engineer-in-Charge.

Supplying, fixing in replacement LED Security light with inbuilt day light sensor which switches ON/OFF Automatically in the absence of sunlight IP66, including connecting and made out of pressure die cast anodised aluminium with toughened glass cover housing, 45 watts LED to achieve electrical safety class 1, Pf >0.95, lumens >110 lm/W, Ingress protection not less than IP65, including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

Supply and fix in repair 09 Watt LED bollard light with opal acrylic diffuser, fiting for pathways and garden rectangular shaped victorian design, clear/ milky diffuser spun cover, die cast pole mounting, efficacy 95 lm/watt, IP 65, module including fixing in concrete post suitable size GI pipe complete all as specified and directed.

Supply and fixing (for High Mast) LED flood light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement, as directed by the Engineer-in-Charge. (for foundation of post top and bollard).

S&F in repair PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs, including Taking down old unserviceable cable any size and type complete all as specified and as directed.

M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings, brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing including Taking down old unserviceable sub main wiring any size and type complete all as specified and as directed.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing including taking out old u/s submain wiring any size/ any type complete all as specified & directed.

M & L for sub main wiring with 10 Sqmm nominal cross sectional area, 4 single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 10.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing including taking out old u/s submain wiring any size/ any type complete all as specified & directed

Supplying and fixing 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor,drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular including taking out old u/s cable any size complete all as specified and directed.

Supplying and fixing 6 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etcserved with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, two twin core cable flat or circular including Taking down old unserviceable cable any size and type complete all as specified and as directed.

Supply & fixing MCB, SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs, including taking down old U/S MCB SP complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs including taking down old U/S MCB SPN complete all as specified & directed.

Supply & fixing MCB, TPN, 415 volts of 100 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs including taking down old U/S MCB TPN complete all as specified & directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing inluding taking down Old U/S DB all as specified & directed.

Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing inluding taking down Old U/S DB all as specified & directed.

Supply & fixing MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing inluding taking down Old U/S DB all as specified & directed.

Supply & fixing Sheet Metal Enclosures TPN, 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing including taking down old u/s DB any type and size all as specified & directed.

Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing inluding taking down Old MCCB DB all as specified & directed.

S&F MCCB 4Pole 415 V fixed type, 63/100 Amps with breaking capacity 16 KA inluding taking down Old U/S MCCB complete all as specified and directed.

Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections inluding taking down Old U/S AC box complete all as specified & directed.

Supply and fix in repair metal clad socket 20 Amp 2P+E, 230 volt AC complete all as specified and directed

Supply and fix in repair metal clad plug 20 Amp 2P+E, 230 volt AC complete all as specified and directed

S&F in repair Hylum sheet 3 mm thick of 9"x5" size for fix suitable PT switches/sockets/regulator complete all as specified and directed.

S&F in repair Hylum sheet 3 mm thick 9"x7" size for fix suitable PT switches/sockets/regulator complete all as specified and directed.

S & F in replacement for LED Bulb 12 watt 240 volt

M & L forEarthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I including taking out old u/s earthing material cable.

S & F in replacement Poly carbonate Body plug top 3 pin, 15/16 Amps, 230 Volts complete all as specified.

Renewal of copper sheathed and nickel plated heating element 1.5/2.0 KW (ISI marked) triangular/ Cup shaped push/ threaded type suitable for horizontal or vertical type water storage type water heater( Geysers) all as specified and directed.

Renewal of thermostat, minimum 300 mm long, suitable for any make & type of geyser 25 / 50 litres capacity horizontal or vertical type all as specified and directed.

Supply and fixing glass wool (spl quality) at thermal insulation after removing the old glass wool in between the inner container and outer casing complete all as directed by Engineer-in-Charge.

Renewal of stainless steel inner cell of 25/50 litres capacity geyser and making connections by brazing including all asseccories all as specified and directed.

Renewal of steel assembly heavy duty powder coated to match with the colour of existing geysers suitable for 25/50 litres capacity all as sepcified and directed.

Renewal of PVC connection SS heavy duty suitable for Hot/ Cold water connections in geysers braided 450mm long with flare brass nuts on both ends complete all as specfied.

S & F Chromium plated brass angular stop cock concealed with wall flange fixed to 15 mm bore of iron pipe as in repair etc complete all as specified and as directed.

Renewal of hex nipple 15mm bore heavy duty complete all as specfied.

Renewal of neon Indicator Bulb ( Red and green) all as specified and directed.

Supply and fixing of rubber/PVC gasket to ensure water tightness of 25 Ltr geyser suitable as per sample complete

Renewal of spring loaded air release safety valve 15mm dia made of Brass Nickle/ Chromium plated all as specified and directed.

S&F Mild steel clamp of flat iron of size (25X6mm ) made to shape 100mm long welded with outer casing of geyser to walls with bolts and nuts complete all as directed by Engineer-in-Charge.

Taking out existing old unsv cable and supplying, laying, jointing testing and commissioning XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts cross section area 25 sqmm,3.50 core (ISI marked) laid in trenches, ducts, pipe or fixed on pole etc complete all as specified and directed.

Taking out existing old unsv cable and supplying, laying, jointing testing and commissioning XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts cross section area 16 sqmm, 3.50 core (ISI marked) laid in trenches, ducts, pipe or fixed on pole etc complete all as specified and directed.

Excavation in trenches in soft/loose soil n. exc. 1.5 meter wide and n. exc. 1.5 mtr depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables, foundation of poles, stay etc complete all as specified.

Returning, filling trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 Mtr and dispositing where directed at a level n. exc. 1.50 Mtr above the starting point complete as directed.

M & L for Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable) complete all as specified and directed. Note :- Punned thickness only will be considered for payment.

M & L for Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed.

Supply and laying galvanised steel water tubing, light grade, IS-1239 marked with all fittings (IS marked) and laid in trenches / under roads / in drains / fixed to poles/walls ( with required size flat iron clamp bolts, nuts and washers) pipes of 40mm complete all as specified and directed.

KUKREJA BROTHERS

VIRAT CONSTRUCTIONS

NITHYA INFRATECH