Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.0 L+₹2.9 L (7.29%)Rejected-Finance I 910 JAHANGIR PURI NEAR BY ANAND MAYA HOSPITAL NORTH WEST DELHI DELHI 110033 UDYAM DL 06 0040830 | NORTH DELHI | DELHI | 110033 | L2 | Rejected-Finance L2 | |
| 3 | L3₹44.1 L+₹4.0 L (10.1%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L3 | Rejected-Finance L3 | |
| 4 | L4₹44.8 L+₹4.7 L (11.9%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹45.1 L+₹5.1 L (12.6%)Rejected-Finance | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | KAMAL AGGARWAL L1 | NATIONAL BUILDERS L3 | SANMATI UDYOG L5 | SATISH AND CO L2 | Sanjiv Kumar L4 | KMTR MONCHER COLLECTION PRIVATE LIMITED L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of concrete of any description and in any position not otherwise complete all as directed. | 60 | Cum | 350 ₹21,000 | 300 ₹18,000 | 150 ₹9,000 | 250 ₹15,000 | 100 ₹6,000 Lowest | 100 ₹6,000 Lowest |
| 2.00 | M&L for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sunken flooring complete all as specified and as directed. | 60 | Cum | 2,000 ₹1,20,000 | 1,800 ₹1,08,000 Lowest | 5,000 ₹3,00,000 | 2,500 ₹1,50,000 | 3,200 ₹1,92,000 | 3,500 ₹2,10,000 |
| 3.00 | Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under :-
(i) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg.
(ii) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided.
(iii) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement.
(iv) GI pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 45cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction.
(v) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment.
(vi) Two component Acrylic modiied Cementitious coating:-
(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- | 135 | Sqm | 2,000 ₹2,70,000 | 1,800 ₹2,43,000 | 500 ₹67,500 Lowest | 1,000 ₹1,35,000 | 950 ₹1,28,250 | 1,000 ₹1,35,000 |
| 3.01(bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO. (dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. | |||||||||
| 3.02(jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (vii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent. (viii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around | |||||||||
| 4.00 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as directed. | 5 | Cum | 250 ₹1,250 | 120 ₹600 | 500 ₹2,500 | 250 ₹1,250 | 100 ₹500 Lowest | 100 ₹500 Lowest |
| 5.00 | M&L for brick work with sub-class `B' bricks in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. | 20 | Sqm | 4,600 ₹92,000 | 480 ₹9,600 Lowest | 800 ₹16,000 | 1,000 ₹20,000 | 550 ₹11,000 | 550 ₹11,000 |
| 6.00 | M&L for Brick work with fly ash sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete as specified and as directed. | 14 | Cum | 6,700 ₹93,800 | 6,600 ₹92,400 | 4,800 ₹67,200 | 5,000 ₹70,000 | 4,200 ₹58,800 Lowest | 4,500 ₹63,000 |
| 7.00 | M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for under pinning including providing, fixing and removing shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified | 12 | Each | 250 ₹3,000 | 300 ₹3,600 | 1,000 ₹12,000 | 200 ₹2,400 | 100 ₹1,200 Lowest | 100 ₹1,200 Lowest |
| 8.00 | Taking down cement plaster of any description incl raking out joints, hacking for scrubbing down with water etc. cement all as directed. | 410 | Sqm | 25 ₹10,250 | 30 ₹12,300 | 15 ₹6,150 | 15 ₹6,150 | 10 ₹4,100 Lowest | 10 ₹4,100 Lowest |
Tender Value
₹46.6 L
EMD Value
₹93,200
Closing Date
27 Dec 2025, 6:00 pmClosed
Garrison Engineer (East) JRC
Garrison Engineer (East) JRC
SPL REPAIR TO SUNKEN FLOOR OF TOILETS AND BATHROOMS RAINWATER PIPE AND DRAINAGE OF ORS LINE BLDG NO P-16 OF MH JRC AND OTHER SANCTIONED WORKS UNDER AGE B/R-I OF GE (E) JRC
2025_MES_743395_1
GE/JUL/ET-66/2025-26
Open Tender
Civil Works
Item Rate
183 days
Garrison Engineer (East) JRC
As per tender document
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) JRC
₹93,200
Yes
20 Feb 2026
6 Dec 2025
30 Dec 2025
6 Dec 2025
27 Dec 2025
20 Dec 2025
Amount
Demolition of concrete of any description and in any position not otherwise complete all as directed.
M&L for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sunken flooring complete all as specified and as directed.
Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under :- (i) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg. (ii) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided. (iii) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement. (iv) GI pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 45cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction. (v) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. (vi) Two component Acrylic modiied Cementitious coating:- (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-
(bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO. (dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces.
(jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (vii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent. (viii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as directed.
M&L for brick work with sub-class `B' bricks in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L for Brick work with fly ash sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete as specified and as directed.
M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for under pinning including providing, fixing and removing shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified
Taking down cement plaster of any description incl raking out joints, hacking for scrubbing down with water etc. cement all as directed.
M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified and as directed.
M&L for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and as directed.
M&L for 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface in any description finished even and fair without using extra cement all as specified and as directed.
Dismantling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified and as directed.
S&F Non skid ceramic coloured tiles (premium quality) 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed 1:6 CM complete all as specified and as directed Make :- Kajaria/ Somany/ Johnson.
S&F of glazed ceramic coloured /printed tiles (premium quality)300x450x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in CM (1:4) in vertical surfaces of walls/skirting etc. complete all as specified Make :- Kajaria/ Somany/ Johnson.
Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each and removal to store complete all as specified
Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm each and n.exe 4.0 sqm removal to store complete all as specified
S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, in opening as per specification & drawing given in SSR-2004, complete all as specified and as directed.
S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified.
S&F aluminium alloys anodised sliding door bolt with hasp & staples 300mm (Bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloys and fixed complete all as specified and as directed.
M&L for 150 mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100mm size butt hinge extruded aluminium alloy with galvanised mild steel hinge pin, anodised all as specified
S&F 75 mm size butt hinge extruded aluminium alloy with galvanised mild steel hinge pin, anodised all as specified
S&F 125mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F steel window /ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter :- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 Nos per leaf (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (e) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Wire mesh and painted shall be measured and paid separately under respective item of schedule
Ditto all as per Srl item No 25 above, but gauged shutters without sash bars
M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and as directed
S&F Galvanized mild steel wire cloth 0.48 mm nominal dia and average width of aperture 1.40 mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as directed.
S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid to wall 100mm dia complete all as specified
S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 100mm dia complete all as specified
S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 75mm dia complete all as specified and as directed.
S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid to wall 75mm dia complete all as specified
S&F for PVC (SWR) Junction Single 'T' equal or unequal 110mm dia complete all as specified
S&F for PVC reducer (SWR) 110mm dia complete all as specified
S&F for PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement complete all as directed
S&F PVC (SWR) bends any radius 110mm dia complete all as specified
S&F PVC (SWR) bends any radius 75mm dia complete all as specified
S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 75mm dia complete all as specified
S&F PVC (SWR) vent cowl 75mm dia complete all as specified
S&F PVC (SWR) vent cowl 100mm dia complete all as specified
S&F PVC (SWR) multi Nahani trap with grating including jointing with solvent cement 75mm dia complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
M&L for reinforced cement concrete type M 25 (using 20 mm graded stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified
M&L for fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.
Ditto all as per Srl item No 48 above, but TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified
Taking down GI Tubing 15 mm dia and connection including cleaning for refixing or removal to store complete all as specified
Taking down GI Tubing 20 mm dia and connection including cleaning for refixing or removal to store complete all as specified
S&F GI tubing medium grade (ISI marked) 15 mm bore fixed to wall/ ceiling or floor including all fitting/ fixtures all as specified and as directed.
S&F GI tubing medium grade (ISI marked) 20 mm bore fixed to wall/ ceiling or floor including all fitting/ fixturesall as specified and as directed
S&F in repair 15 dia Angle Valve (ISI marked) fancy type chromium plated with long shank and cup complete all as specified and as directed. Make:- Jaquar/ Cera/ Ess-Ess.
S&F in repair 15 mm bore chromium plated stop valve, concealed type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed
S&F in repair bib taps fancy type long body ISI marked cast copper alloy chromium plated suitable for 15mm bore pipes with crutch or butter fly handle screwed for iron pipe or brass ferrule all as specified .
S&F PVC connection 450 mm long suitable for 15 mm bore pipe including PTMT nuts complete all as specified and as directed.
S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and as directed.
S&F PVC waste pipe 32 mm dia flexible for wash hand basin complete Make -Polyplast/Symet or equivalent complete all as specified and as directed.
S&F in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm incl breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified. Make:- Hindware/ Parryware/ Cera.
S&F in repairs in repairs Vitreous China Half stall urinal with spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws and waste pipe, pointing around urinal back in cement complete all as specified. Make:- Hindware/ Parryware/ Cera.
S&F in repairs PVC low level valve less symphonic action type flushing cistern of capacity 10 ltr including float valve, brackets, PVC short bend complete all as specified. Make:- Hindware/ Parryware/ Cera.
S&F in repairs Vitreous China Wash hand basin white, flat back size 600 x 450 mm size all as specified and as directed. Make:- Hindware/ Parryware/ Cera.
S&F in repair 15mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified Make:- Jaquar/ Cera/ Ess-Ess
S&F in repairs droplets looking mirror of (900x600x6mm) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed
S&F towel rail chromium plated brass 600 mm long fixed with and incl CP brass screw complete all as specified and as directed. Make:- Jaquar/ Cera/ Ess-Ess
M&L for preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed
M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed
M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming complete all as specified
M&L for 18 to 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed
S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed. Make:- Jaquar/ Cera/ Kohler.
S&F Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.
S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed. Make:- Hindware/ Paaryware/ Cera.
S&F Peg Set of chromium plate with 3 hooks, solid body, minimum 450 mm long, quality complete all as specified and as directed.
S&F sheet glass shelf corner assembly consisting of 5.5 mm thick sheet glass shelfs 2 tier with chromium plated bracket/ frame, complete all as specified and as directed. Make:- Jaquar/ Cera/ Kohler.
S&F rotational moulded synthetic (HDPE) water storage tank (white antimicrobial) 1000 litre capacity triple layer (cylindrical vertical with closed top) hoisted & fixed in position with 20mm float valve all as specified in SSR Part-I, including dismantling of existing water tank, complete all as specified and as directed. Make:- Sintex/ Rotex/ Sheetal.
M&L for cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls complete all as specified and as directed.
Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) all as directed.
M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished rough to receive top layer complete all as specified and as directed.
M&L for rubber moulded mat finish coloured cement concrete tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and as directed.
M&L for 50 mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection (using 20mm graded stone aggregate) finished even & smooth with using extra cement including panel joint all as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and as directed.
M&L for brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling/mass concrete complete all as specified and as directed.
M&L for reinforcement cement concrete 1:2:4 type B1 nominal mix (using 20mm graded stone aggregates) as in foundations, including raft footing, foundation beams, for columns etc, basement slabs and mass concrete complete all as specified and as directed
M&L for reinforcement cement concrete 1:2:4 type B1 nominal mix (using 12.5mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed
Use and waste form work to sides of concrete foundations, footings, bases of columns and similar works rough finished flat surfaces of concrete all as specified and as directed.
Use and waste form work to sides of pillars, posts, columns and similar works rough finished square, rectangular or polygonal surfaces of concrete all as specified and as directed.
M&L for providing cement concrete1:2:4 type B1 (20mm graded aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and as directed
Removal of excavated material upto exc. 250m but n.exc 500m and deposited where directed by the Engr-in-Charge.
M&L Returning / Filling in including spreading levelling watering & well ramming in layers n.exc 25 cm in soft/ loose soil all as specified
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and as directed.
M&L for 25/ 30mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed
M&L for 80mm thick M-40 grade Rubber moulded coloured & reflective type cement concrete interlocking paver blocks hydraulically complete all as specified and as directed
M&L for 80mm thick M-40 grade Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006, laid over and incl 25 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and as directed
Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, all as specified
Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and as directed
M&L for PCC 1:3: 6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed
M&L for M.S work in angle iron/ flats/ Pipes/ plates in posts, rafters, purlins, etc connected to common rafters of any size confirming to Fe 410-W (grade-E-250) quality A including necessary drilling holes, cutting tops to shape welding etc and fixed with nuts & bolts etc complete all as specified and as directed
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified. Make:- TATA Blue Scope/ JSW.
S&F Pre painted Galvalume Aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified, complete all as specified and as directed
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping etc including necessary form work, weathering slightly rounded or chamfered angles and throating complete all specified and as directed
Taking down carefully existing point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing unserviceable materials from site for taking credit as schedule of credit and keeping serviceable light fittings in safe custody for re-use at site and making good disturbed surface of walls, floors etc. complete all as specified and as directed
M&L for point wiring for one light/ fan/ bell point controlled by one switch SP one way with 1.5 Sqmm, PVC insulated , unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through in and including non metallic rigid PVC concealed conduit , medium grade, ISI marked 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunken pressed steel terminal switch box as specified with 3mm thick plastic laminated sheet top cover fixed with brass/cadmium plated steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and as directed
Ditto all as per Srl item No. 108 above, but for one socket outlet 5 Amps on independent board complete all as specified
Ditto all as per Srl item No. 108 here-in-before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified.
S&F in replacement Switch piano, flush type single pole, one way 6 Amp complete all as specified and as directed
S&F in replacement Switch piano, flush type single pole, one way 16 Amp complete all as specified and as directed
S&F in replacement Socket outlet 3 pin, 6A, flush type complete all as specified and as directed
S&F in replacement Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and as directed
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light with lumen efficacy 120 lumen/watt, power factor not less than .90, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make:- Havells/ Philips/ Crompton.
M&L in repairs Submain wiring with two run of FRLS PVC insulated unsheathed multistranded copper conductor single core 6 Sqmm drawn through in and including PVC rigid non metallic surface or concealed conduit medium grade with all fittings including earth continuity copper conductor 6 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor with green insulation complete all as specified including taking down existing unserviceable/burnt submain any type complete all as specified and as directed
S&F in repairs/replacement Sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with copper bus bar, double door, epoxy/powder coated inside and outside complete all as specified.
M&L in replacement MCB SP 5 Amps to 32 Amps, 240V with rupturing capacity 10 KA, C Curve complete all as specified
M&L in replacement MCB SPN 5 to 32 Amps, 240V with rupturing capacity 10 KA, B Curve complete all as specified
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amp 240 V 10 KA complete all as specified and as directed
S&F heavy duty exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers of superior quality made of CRCA frame and aluminium flappers complete all as specified and as directed. Make:- Havells/ Crompton.
M&L for making opening in brick wall of size 380mm dia for exhaust fan fixing, making good to the wall to make good disturbed surface complete all as specified and as directed.
SATISH AND CO (BID ID -3514888)
NATIONAL BUILDERS (BID ID -3513077)
Sanjiv Kumar (BID ID -3520057)
SANMATI UDYOG (BID ID -3514632)
KMTR MONCHER COLLECTION PRIVATE LIMITED (BID ID -3520042)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_832529.xls
BOQ • 1.85 MB
Tender66.pdf
Tender Documents • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .