REPAIR TO DRAINS RCC BRICK DRAIN COVERS COVER SLAB AND GRATING AND PERIODICAL SERVICES AND CAMOUFLAGE PAINTING TO CERTAIN BLDGS AND BOUNDARY WALL IN DOMESTIC AREA AT AF STN JAMMU UNDER GE AF JAMMU

Amount

M&L Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil including removal of excavated surplus soil out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same complete all as spd and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, including removal of demolished material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same complete all as specified.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, all as specified.

All as per description of serial item No 3 above but except bricks.complete all as spd and directed.

Demolition of cement concrete in ground floors and paving (un reinforced) including Tiles Pavings blocks if any n exc. 15 cm. thicknesses, below or above ground level, including removal of demolished material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same, complete all as specified.

M&L for 100mm thick PCC 1:2:4 type B-1(Using 20 mm graded crushed stone aggregate) as in floor,hard standing surfaces finished even and smooth without using extra cement laid in alternate panel including use and waste of formwork fair or rounding or chamfered of exposed edges all as specified and directed.

M&L for PCC 1:4:8 type D-2(40 mm graded stone agg) as Foundation, Filling, mass concrete to fdn etc complete all as spd and directed.

M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work complete all as specified.

M&L for PCC 1:3:6 type C-2 (40 mm graded stone agg) as in surface channels and drains.complete all as specified.

Extra for fair finished drain 30cm inner girth in cement concrete, using extra cement all as specified.complete all as specified.

Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, including removal of demolished material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same complete all as specified.

M&L for RCC 1:2:4 type B-1 (20 mm graded stone agg) as in slabs, similar suspended work including necessary form work etc complete. etc complete all as specified.

M&L for RCC 1:2:4 type B-1 (20 mm graded stone agg) as in wall, drain , retaining wall and similar suspended work including necessary form work etc complete all as specified.

M&L for Precast RCC (1:2:4) type B-1 using 20 mm graded stone agg as cover slab fo man holes etc including form work.complete all as specified.

M&L for TMT steel bars 10mm dia and over cut to length bent to shape required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.90mm dia all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter etc complete all as specified.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as spd

Rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.all as specified and directed.

Dismantling existing unservicable floor tiles of any description including bedding/screed layer including removal of demolished material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same complete all as specifed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and directed by Eng-in charge. Note:- Before execution of above mentioned item it is compulsary to make good the existing surface of PCC so that paver block could be fixed properly and no extra cost will be bourne by department.

M&L for Precast Cemented designer type tile any thickness and size also design,colour and pattern should be approved by GE set,jointed and pointed in net cement slurry in floors, and cut and,laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and directed by Eng-in charge

Dismentling of wrought iron,mild steel work such as agle iron,flate and similar type work or any description not otherwise provided complete all specified and directed.

M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge and any type of ornament pattern and design as approved by GE. Note:- 1.Contractor shall not have any claim in respect of design/Ornamental shape/designer member,the differnece of rate and amount of desinger pattern will not be paid by Department.

M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick/concrete surfaces etc including racking out joints, hacking for keys and scrubbing down with water etc and removing all debris to a distance exc 50 mtr but not exc 100 mtrs,necessary formwork scaffolding required upto the 6th story complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces on walls mixed with integral liquid WPC by weig (WPC shall be measured and paid in respective item of WPC).complete all as specified. Note:- 1.The plaster shall be executed in patches as per ground requirement at any where and upto the any height and contractor shall have to provide formwork as per ground or upto any height including necesaary safety precaustion should be carried out for site execution, No extra payment will be paid by department.

M&L for 15mm thick cement plaster on fair faces of brick work/stone work on Walls in cement mortar 1:6, on concrete surface finished even and smooth without using extra cement,necessary formwork scaffolding required upto the 4th story complete all as specified and as directed.

Supply only integral water proofing compound, ISI marked complete all as specified.

M&L for making good the surface of chajja/facia/roof projection/ceiling etc by providing cement plaster 1:3 with anti-rust paint as per standared provision and necessary formwork,scaffolding required upto the 4th story complete all as specified and directed and directed by engr-in-charge. Note :-No extra cost will be bourne by department.

M & L Preparation of newly plastered surfaces of walls upto 30 mtr height including applying one coat primer and two coats of exterior quality paint in camoflaging pattern Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life offering ten years guarantee (with RGB value in SIGMA Pattern) in any tint on melbow width like roof projection, facia, Chajja etc) all as per manufacturer's instructions and complete all as specified and directed by Engineer-in-Charge as per Pattern approved by USER's for the camouflage pattern.

M&L preparation of newly plastered surfaces of walls, Applying two coats of distemper with oil emulsion over a coat of primer including necessary formwork scaffolding required upto the 4th storey complete all as specified and as directed.

M&L Prepration of new surfaces of ceiling incliuding scraping of old flakes with the help of mechenical /elcterical sander ,washing down with help of water and apply three coat of white wash on surface of ceiling.complete all as spd and directed

M&L for prepration of new/old surfaces of wall and apply 2-3mm wall care cement based putty (internal and external as per ground requirement) ,necessary formwork scaffolding required upto the 4th storey as specified and directed

M&L for preparation of old decorated wooden surface,applying one coats of synthetic enamel paint on wooden surfaces including necessary filling material as required at site to make the surface smooth and even.complete all as spd and directed by Engr-in-charge.

M&L for preparation of old decorated surface of steel,applying one coats of synthetic enamel paint on steel surfaces including necessary filling material as required at site to make the surface smooth and even.complete all as spd and directed by Engr-in-charge.

M&L for prepartion and scrapping down of old decoated surface of wall/Boudary wall with mechanical/elctrical sander and washing down the surfaces with the help of water completely and apply one coat of oil bound distemper of any tint on walls in camoflaging pattern and filling gaps with putty so as to provide smooth surface,the surface shall be even and smooth,free from any undulation as directed by engr-in-charge.

M & L Complete removal of old existing whrerein the previous decoration has been completly removed from plastered surface of walls by using sanders brushing machine and proper washing of walls with water.over one coat of primer and applying two coats of exterior quality paint in camouflaging pattern Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life with offering 10 yrs gurantee (with RGB value) in any tint on melbow width like roof projection, facia, Chhajja etc) all as per manufacturer's instructions and complete all as specified and directed by Engineer-in-Charge as per Pattern approved by USER's for the Camouflage pattern.

NOTE:- 1. the contractor shall have responsibility to clean, safe guard all electric fitting,window frame,door frame,fans,floor and funiture from splashes of OBD.the work should be executed through specilized workmenship and MOU should signed between contractor and authorized applicator and should be submitted to the GE. 2.Remove Kitchen reck,mirror etc and refix at its own existing place after painting work finished. 3. Also take necessary action for safty of employees working at height,No extra cost to be borne by govt. SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

M/S MOHAN LAL SHARMA (BID ID -3391805)

Rakesh Kumar Malia (BID ID -3392272)

M/s Sunny Gupta (BID ID -3391782)

M/S VED PAUL MAHAJAN (BID ID -3396516)