SPL REPAIR TO INTERNAL ROADS AT VARIOUS LOC AT TALBEHAT MIL STN UNDER AGE (I) TALBEHAT

Amount

M & L for scarifying or picking graveled, macadam or bituminous macadam surfaces, depth exc 50mm but not exc100mm deep and area exc 400 sqm complete all as specified and as directed.

M & L for scarifying or picking graveled, macadam or bituminous macadam surfaces, depth ne xc 50mm deep and area n exc 400 sqm complete all as specified and as directed.

M&L for WBM of average 7.5 cm thick each (compacted thickness ) including necessary filling of dubbing out where required with coarse aggregates of grading 2 (63 to 40 mm size ) or of grading 3 (50 to 20mm size), spread, rolled with 8 to 12 tonne power rollar & compacted to required camber and (Type of aggregate Granite,Trap,basalt), complete all as specified and as directed.

M & L for preparing unsurfaces WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, Unsurfaced Water bound macadam, complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm, using bitumenous primer VG-10, complete all as specified and as directed.

M&L for Premix bituminous, macadam with paving bitumen VG-30 not less than @ 4 % by weight laid/rolled with 8 to 12 tonne power rollar and compacted to required gradient and camber (consolidated thickness 75mm or less) as filling of pot holes and patch repair complete all as specified and as directed.

M & L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, Black top surfaces, complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with bituminous primer VG-10 at 5 kg per 10 sqm, using bitumenous primer ,all as specified & directed. complete all as specified and as directed.

M & L for bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.5% binder content as in semi-dense asphaltic concrete, Binder Content Paving bitumen VG-30 any penetration, complete all as specified and as directed.

M & L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete all as specified and as directed.

M&L Forming berm including raising earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed. (Rate quoted by contractor deemed included removal of excess soil/Addition of soil as required).

M&L for road line painting with golden/yellow/white thermostatic compound with reflectorised glass beads on road providing and laying of hot applied thermostatic compound 2.0mm thicks including reflectorised glass beads & 250 gm per sqm area, thicness of 2.0mm is exclusive of surface applied glass beads as per IRC 35, including cleaning of old road marking paint (if required), the finished surface to be levelled, uniform and free streaks and holes in addition where arrows of letters are to be provided thermostatic compound should be machine sprayed and the colour of compound, complete all as specified and directed.

Supply & Fixing of Raised Pavement marker (cat eye) of avery dennison/ 3M make or approved quality in size of width not exc 120 mm and height not exc 20 mm made up of strong engineering polymer thermoplastic polyurethane with electronic welded abrasion resistant lenses for retro reflection in dry & wet weather condition along with bituminous adhesive as per MORTH specifications complete all as specified and directed. Make: Avery Dennison / Greenlite /ABS Solar India/Road Star

Supply & Fixing of solar road studs with stem fixed with epoxy of size 125 x 125 x 20 mm / 125 x 125 x25 mm powerful mode extra bright Aluminium die cast matt finish conforming to IS 617 : 1994 designation 4250 having high intensity 3x2 nos LEDs flashing throughout the night with backup of atleast 4 nos of sunlight days amber or red colour all weather resistant with superior polycarbonate solar cells & side reflectors complete all as specified & directed. Make: Avery Dennison / Greenlite /ABS Solar India/Road Star

S&F Retro reflective sign board made up with 1.2mm thick stainless steel sheet of which both faces shall be fully covered with high intensity prismatic(HIP) retro reflactive sheeting of approved specification as MORTH having approved massage (Matter and Base) fully processed by pressure sensetive equipment of approved brand (Avery Dennison/3M) fixed on stainless steel frame made up of SS as described in the item No 22.00 specification complete all as specified and directed.

Excavating in post holes each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C-2 as in foundation, and mass concrete using 40 mm graded stone aggregate complete all as specified and directed .

S&F Framed/ Unframed work as in sign board of angle or other section with gusset plates,rails,braces,also small article etc complete,all small articles including drilled for fixing of steel sheeting or other covering etc to be prepared for hanging and including either hooks,welding and hanging also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for ACP background sheet for thickness (3mm to 4mm ) and fixed in angle and other section frame in any position specifications complete all as specified and directed. Note:- (i) The design of each board,size,shape,colour,thickness shall be approved by Engineer-in-Charge. (ii) Using of T&P etc to be included in this item. (iii) Frame work and paint work shall be measured and paid separately.

S&F for for stainless steel letter mirror finish for outdoor (height min 10"). The letter are fixed in ACP sheet sign board with using of adhesive paste properly in any position complete all as specified and directed. Note:- (i) The design of letter,colour, thickness and size shall be approved by Engineer-in-Charge. (ii) Using of T&P etc to be included in this item.

Supply & Erection of framed work for Sign board using stainless steel Gde 304 tubular section (round/square) size 25 mm to 120 mm with all fittings like bend, tee etc. complete all as specified and directed. Note:- The design of each sign board frame / stand shall be approved by Engineer-in-charge.

Taking down sign boards of any type and any size complete in all respects specification complete all as specified and directed.

HARNAM SINGH ANIL SINGH