Renvoation of Perumal Thayar sannthy Mandapam Front Madapam Partially reconstruction Steps renovation Provide cutstone flooring Gl to Hill Bottom Renovation of Kilkoil to Arulmigu Varadharajaperumal Thirukoil Kacharapalyam Chinnaselam TK

Amount

Providing additional strutting to centering of Stone slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.Ht of 8 m

Providing additional strutting to centering of Stone slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers. Avg Ht of 3 m

Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing non flammable materilas as covering the areas & plat form for inspection etc all complete.

Vimanam 15'

Vimanam 25' Ht

Providing vargapoochu over the core walls of vimanams/Gopurams,with Lime MORTAR 1:1.5 (one lime and one and half of MSand) complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with Lime MORTAR 1:1.5 (one lime and one and half of MSand) and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

Vimanam 15'

Vimanam 25' Ht

Painting two coats of newly plastered wall surface with ready mixed water based exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Labour Charges for Old Stone Removing for wall, pavukkal (Data Enclosed for hill area)

Labour Charges for Old Stone Removing carefully away from site etc compelete.,(Utiram, Botiyal) (Data Enclosed for hill area)

Labour Charges for Old Stone Removing For Flooring (Data Enclosed for hill area)

Supply of cutstone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other temple Structure upto 10 feet length

New Stone

Labour Charges for New Stone dressing and Fixing charges, Wall (pillars)

Labour Charges for New Stone dressing and Fixing charges, pavukkal

Labour Charges for New Stone dressing and Fixing charges, Bothiyal

Labour Charges for Old Stone Refixing for wall pavukkal, wall, pillars

Paving with cut stone flooring using old cut stone of top surface is neatly dressed and pointing with lime mortar 1:1.5 (one lime and one and half of MSand) including all materials and labour charges. (OLD Stones)

Filling with foundation and basement with M sand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 (one lime and one and half of MSand) including all materials and labour charges.

Single Line Dressing

Three Line Dressing

Dismantling the damaged Brick Masonry in Lime mortar walls above 3m high

Remove the modern flooring tiles away from site

Brick work in Lime mortar 1:2 (One of Lime and two of Msand) mix using country bricks 83/4"x43/8"x23/4" size inculding curing, scaffolding etc. complete complying with std. specification

Removal of roof dead mortar Lime concrete

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete

Finishing the top of roof with one course of machine pressed tiles 23mx 23cmx20mm of approved quality laid in cm 1:3,12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications.

Pointing with Lime mortar 1:1.5 (one lime and one and half of MSand) including all tools and plants and labour etc all complete for cut stone masonry.

Restoration by providing water wash removal of enmael paint (Combination of gastic soda and low preasurre water with little acid) are used for removel of enamel on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1.5 finishing the same with LM 1:1.5 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) 2'6" to 3'6"

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Plastering with Lime mortar 1:1.5 (One of Lime and One and Half Msand) ,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Clean light jungle clearance

Removal of the Cut Stone slabs Steps including all labour charges etc complete.,(Hill Area Data Enclosed)

Refixing of the Cut Stone slabs Steps including all labour charges etc complete.,(Hill Area Data Enclosed)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in existing trunking box on wall and ceiling with with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire for Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End ( DATA A )

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End ( S D 289 )

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (S D 462)

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting. (Data B)

Supply and fixing of fancy glass shade and 9W LED for BH point. (Data C )

Supply and fixing of WT bulk Head fitting with Guard with 9W LED bulb (Data D )

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting ( S D 532 )

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . ( S D 543 )

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 474 )

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End ( SD 486 }

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple. (Data E)

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple. (Data F )

Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data G )

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . ( DATA H )

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . ( DATA I )

Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data J )

Supply and laying of 4 x 2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data K )

Supply and clamping of 2 x 6 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data L )

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data M )

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 202)

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 220)

Supply and fixing of brass cable gland for 4 x 25/ 10 sqmm PVC armoured LTUG cable with earth connection. (SD 185)

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (Data N )

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (S D 609 )

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 632 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 68 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.( SD 73)

Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete. (Data P )

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 734 )

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. (Data Q )

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 234)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (S D 458 )

Supply and fixing of brass cable gland for 2x4 ( 4 x 2.5) sqmm PVC armoured LTUG cable with earth connection. (SD 180)

Supply and fixing of brass cable gland for 2x6 sqmm PVC armoured LTUG cable with earth connection. (SD 181)

Filling with foundation and basement with M sand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in Lime mortar 1:2 (One of Lime and two of Msand) mix using country bricks 83/4"x43/8"x23/4" size inculding curing, scaffolding etc. complete complying with std. specification

Plastering with Lime mortar 1:1.5 (One of Lime and One and Half Msand) ,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 (one lime and one and half of MSand) including all materials and labour charges.

Labour Charges for Old Stone Removing For Flooring

Paving with cut stone flooring using old cut stone all the sides are neatly dressed and pointing with lime mortar 1:1.5 (one lime and one and half of MSand) including all materials and labour charges. (Old Stone)

Providing vargapoochu over the core walls of vimanams/Gopurams,with Lime MORTAR 1:1.5 (one lime and one and half of MSand) complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with Lime MORTAR 1:1.5 (one lime and one and half of MSand) and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

Vimanam 15'

Vimanam 25' Ht

Pointing with Lime mortar 1:1.5 (one lime and one and half of MSand) including all tools and plants and labour etc all complete for cut stone masonry.

sub total

raji (BID ID -1325763)