SPECIAL REPAIR TO BLDG NO P 117 AND P 118 AT KAREN LINE IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

B/R PORTION

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc , complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces , complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound @ 3% by weight of cement content , complete all as specified and as directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3, complete all as specified & as directed.

Supply only Integral water proofing compound, complete all as specified & as directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified & as directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection ,foot path and hard standing, complete all as specified and as directed.

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in coping to chajja tops and all other similar works, complete all as specified and as directed.

S&F in repair's vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral foot rests (excluding flushing cisteren and flush pipe), complete all as specified and as directed.

M&L for (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment , complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete , complete all as specified and as directed.

S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets , complete all as specified & as directed.

S&F in repair's 10 litre capacity two way flush PVC low level flushing cistern with all accessories fixed with WC including syphone pipe, PVC flushing pipe, complete all as specified and as directed.

S&F in repair's 15 mm bore concealed stop valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions , complete all as specified & as directed.

S&F PVC connection 15mm size PTMT nuts of length 450mm, complete all as specified & as directed.

S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts, complete all as specified & as directed.

S&F in repair's bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F in repair's grating square 150mm size of PTMT (minimum 100 gms), complete all as specified & as directed.

S&F sink made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510 mm x 410mm x 203 mm ,bowl size 430mm x 380mm x 203 mm, complete all as specified & as directed.

S&F in repair's 75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified & as directed.

S&F in repair's 75mm Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified & as directed.

S&F in repair's tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges, complete all as specified & as directed.

S&F in repair's shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats ( min weight 300 gms), complete all as specified & as directed.

S&F in repair's chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union ,complete all as specified and as direceted.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed

M&L for Non Skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified & as directed.

All as per item No 1.027 here-in-before but use as skerting

M&L for Non Skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & as directed.

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate 25 mm thick as in floor for receiving screed bed of floor tiling, complete all as specified and as directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc ,complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work in CM (1:6) for receiving vertical dado tiling, complete all as specified and as directed.

M&L for glazed tiles coloured ceramic tiles 200x300x 6 to 7 mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry painted in coloured cement to match, complete all as specified & as directed.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation, complete all as specified & as directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frame), complete all as specified & as directed.

Taking down of chowkats or frames not exc 1.5sqm without taking off shutters from frames , complete all as specified & as directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints , complete all as specified & as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified & as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified & as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified & as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay ,complete all as specified and as directed.

M&L for framed work such as grills etc with ends of bars shouldred and/or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290,Gde-E-165 , complete all as specified & as directed.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork , complete all as specified & as directed.

S&F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165, complete all as specified & as directed.

S&F Factory made 35 mm thick 2nd class H.W plain framed panelled shutters (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per ISI : 1003 (Part-I), kiln seasoned and chemically pressure treated , complete all as specified & as directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a), complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fix in the frame at site as per specification & drawing ,complete all as specified and as directed.

M&L for sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane, complete all as specified and as directed.

S&F butt hinges 75 mm size type C21, extruded alluminium with mild steel hinge pin,bright polished and fixed, complete all as specified andas directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, complete all as specified & as directed.

S&F aluminium anodised barrel tower bolts of extruded section of length 200 mm, complete all as specified & as directed.

S&F aluminium anodised barrel tower bolts of extruded section of length 150 mm, complete all as specified & as directed.

S&F 150 mm long anodised aluminium alloy handles, fabricated type, complete all as specified & as directed.

S&F 125 mm long anodised aluminium alloy handles,fabricated type, complete all as specified & as directed.

S&F 300 mm long anodised aluminium alloy, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as dirceted.

S&F small fittings 2nd class hard wood such as brakcets of any type latch and hinge block shaped door and window stops and the like of 1st class hard wood including all necessary labour articles n. exc 200 cucm each , complete all as specified & as directed.

S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and rollar plates, complete all as specified & as directed.

S&F in repair's curtain rods/ harison mild steel chromium plated with fittings stainless steel brackets, stops, rollers etc ,complete all as specified and as directed.

Taking up or down steel tubing of 15mm bore and connection including cleaning for refixing or removed to store, complete all as specified & as directed.

Taking up or down steel tubing of 20mm bore and connection including cleaning for refixing or removed to store, complete all as specified & as directed.

Refixing of 15mm bore steel tubing and including cleaning in positon walls, ceiling and floor etc complete all as specified and as directed.

Refixing of 20mm bore steel tubing and including cleaning in positon walls, ceiling and floor etc complete all as specified and as directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth, complete all as specified and as directed.

S&F for 15 mm dia medium grade galvanised,with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F for 20 mm dia medium grade galvanised,with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Dismantling of cast iron 100 mm dia pipes jointed in cement mortar , complete all as specified and as directed.

Dismantling of cast iron 75mm dia pipes jointed in cement mortar , complete all as specified and as directed.

S&F cast iron soil, waste and vent pipes( sand cast pipes) 100 mm bore in any length with or without ears, with cement joint laid in trenches or in floors , complete all as specified and as directed.

S&F cast iron soil, waste and vent pipes( sand cast pipes) 75 mm bore in any length with or without ears, with cement joint laid in trenches or in floors , complete all as specified and as directed.

S&F CI bend 100 mm bore dimnishing pieces or tapers (larger bore measured) , complete all as specified and as directed.

S&F CI branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches , complete all as specified and as directed.

S&F cast iron cowels 75 mm bore , complete all as specified and as directed.

S&F cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm , complete all as specified and as directed.

S&F CI bends 75 mm size dimnishing pieces or tapers (larger bore measured) , complete all as specified and as directed.

M&L for complete removal/scrapping of existing treatment of plastered surfaces and applying one coat of alkali resistanse primer over a layer of 3 mm thick wall care putty and two coat of oil bound distemper, complete all as specified and as directed.

M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistanse primer over a layer of 3 mm thick wall care putty and two coat of oil bound distemper , complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint , complete all as specified and as directed.

M&L for preperation of old plastered surfaces of wall and applying two coats of cement based paint including complete removal of existing treatment, complete all as specified and as directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash, complete all as specified and as directed.

M&L for preparation of newly painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and as directed.

M&L for prepartion of old ceiling surfaces and applying one coat of white wash, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not other wise described over 10 cm with or girth, complete all as specified and as directed.

S&F stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 750x600mm including screws , complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

M&L for half brickwork with fly ash subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

M&L for brickwork with fly ash subclass 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items, complete all as specified and as directed.

M&L for PCC(1:2:4) type B-1 (using 20mm graded aggregate) as in roof kerbs or mud stop rounded, complete all as specified and as directed.

1st Layer:- Grading with cement concrete M&L for 25 mm thick average PCC 1:2:4 type B-0 (12.5 mm graded aggregate) for grading in roof as per Para 11.42.2 of SSR Part –I 2009 and as directed by Engineer- in-Charge. Note:- To be applied by authorised applicater.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 without using extra cement and WPC ,complete all as specified & as directed. Note: WPC will be measured and paid separately.

2nd Layer :- Application of Primer - M&L for primer the surface with a mixture of water based UV resistant single component elastomeric PU liquid membrane in situ for waterproofing and potable water in the ratio of 1:1 i.e. (200 gm primer & 200ml water or as per manufacturer instruction) and apply @ 400gm/sqm or as per manufacturer instruction of the mixture and allow to touch dry shall be applied on the prepared surface. complete all as specified and as directed by Engr-in-Charge. Note:- To be applied by authorised applicater.

3rd Layer: M&L for first coat of water based UV resistant single component elastomeric PU liquid membrane in situ for waterproofing @ 1 Kg/Sqm by roller/airless spray while the primed surface is takly and spread non-woven geo-textile mesh of 40/50 gsm with overlaps of 50mm in both directions when the surface is still tackly, second coat of water based UV resistant single component elastomeric PU liquid membrane in situ for waterproofing @ 1 Kg/Sqm by roller/airless spray for final DFT of 1500 micron complete all as specified and as directed by Engr-in-Charge. Note:- To be applied by authorised applicater.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed or bedding layer in mortar 1:6 ,complete all as directed and as specified.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment and including 10mm thick rendering in cement mortar 1:4 , complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in paving finished even and fair ,complete all as specified and as directed.

M&L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 15 mm thick screed bed or bedding layer in cement mortar 1:4 ,complete all as specified and as directed.

Demolition of RCC of any description including (renforcement cut as per required)order to be dismanted ,complete all as specified and as directed.

M&L for TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips ,complete all as specified and as directed.

M&L for RCC (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall,cover slub beams, cantilever, bressummers, lintel and the like etc ,complete all as specified and as directed.

Use and waste of formwork to roof slub slub as like not including 200 mm thick horizontal and vertical surface of concrete flat ,complete all as specified and as directed.

M&L for 20 mm thick black granite Machine cut jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work, complete all as specified and as directed.

S&F Contineous (Piano) hinges, mild steel, bright finish or electrogalvanished (width of flaps 30mm) , complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball,and brass body and striking plate including letting in and fixed 140mm overall length of cover plate , complete all as specified and as directed.

S&F cast iron or mild steel Wardrobe hooks (single) 50mm to 60mm, complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 ,complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and as directed.

M&L for extra for forming fair finish drain channel 45 cm inner grith in cement concrete using extra cement ,complete all as specified and as directed.

E/M Portion

Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing, complete all as specified & as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store, complete all as specified & as directed. Note: To be measured only when found serviceable in all respects complete for reuse.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc, complete all as specified and as directed.

M&L for point wiring for socket outlet on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed.

All as per item No.2.03 here-in-before but 5 Amp socket on same board with other switches.

All as per Item No 2.03 here-in- before but for one light point controlled by two -2 way switches.

M&L for point wiring for socket outlet 3 pin , 15 Amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed.

S&F switch piano flush type, single pole , 6 Amps, one way, complete all as specified & as directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch , complete all as specified & as directed.

S&F socket outlets 2 in 1, 5/6 Amps flush type 230/240 V, complete all as specified and as directed . Note: For Same Board only

S&F switch socket combination 5 in 1 , 16 Amps flush type controlled by one switch , complete all as specified & as directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps , complete all as specified & as directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked , complete all as specified & as directed.

S&F Lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings , complete all as specified & as directed.

S&F LED Bulb 7 Watts ,240 Volts ,ISI Marked, complete all as specified and as directed.

S&F Bell push , flush type , 5 amp , complete all as specified & as directed.

S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts , complete all as specified & as directed.

S&F decorative wall mounting made out of polycarbonated suitable for and including retrofit 5 watts LED Bulb , complete all as specified & as directed.

S&F exhaust ventilation fan of sweep 230mm,240 volts, metalic body, BEE 5 star rated, ISI marked ,complete all as specified and as directed .

S&F GI pipe light grade 40 mm dia of size for road cross of cable,ISI marked, complete all as specified and as directed.

S&F XLPE insulated armoured cable, 25 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed , complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil, complete all as specified and as directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil ,complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point , complete all as specified and as directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying, complete all as specified and as directed. Note : Punned thickness shall be measured.

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable , complete all as specified and as directed.

S&F two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and as directed.

S&F two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and as directed.

S&F 1 x 18 W LED batten light fittings, with T-8 tube rod, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and as directed.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed.

S&F 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection , complete all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral DB, 8 ways, 240 V with mounting fitted with bus bar, DIN channel , neutral link and incoming contact , complete all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, vertical type, including upto 250A MCCB incomer (when MCBs to be used), Triple pole and neutral DB, 415 V, 4 ways with mounting fitted with bus bar, DIN channel , MCBs, neutral link and incoming contact , complete all as specified and as directed.

S&F MCCB TPN 125 Amps, 25kA, 240 Volts,ISI marked and to be housed in DBs including necessry connection, Complete all as specified and as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection,complete all as specified and as directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I and testing on completion, complete all as specified and as directed Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S&F recess cum surface light round shape,240v, ISI mark, 18 watts, complete all as specified and as directed

S&F electric water heater storage type 25 Ltrs with all fixing arrangement including nuts & bolts etc, complete all as specified and as directed

Supply and laying of pipe GI medium grade 15 mm dia in wall ceiling or floor etc, complete all as specified and as directed .

S&F Stop valve fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe, complete all as specified and as directed

S&F Bib tap cast copper alloy high pressure with crutch or butterfly handle screwed for iron pipe, complete all as specified and as directed

S&F PVC Connections 15 mm size with PTMT nuts of length 300 mm long, ISI marked ,complete all as specified and as directed

Supply & fix in repair's 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings, complete all as specified & as directed .

Supply and fixed in repair's 25 mm bore gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and as directed.

S&F in repair's Rotational / moulded Polyehtylene water tank (Cylindrical vertical with closed top) of capacity 500 Lit , hoisted & fixed in position, complete all as specified and as directed .

S&F in repair's Ball brass valves 25 mm bore, high pressure, with polythene float and fly nut , screwed for iron pipe or brass ferrule , complete all as specified and as directed.

Schedule of Credit

S. D. Construction Co.

K L BAKSHI AND SONS