ADDN ALTN OF ROOF TOILET AND BATH ROOM OF BLDG NO P 145 AND P 146 OTM ACCN OF 61 MED REGT UNDER AGE B R N NO II OF GE N SECUNDERABAD

Amount

Demolition of cement concrete in Roofs(incl felt and plastering), floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work otherwise specifically provided for roof treatment including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed

M & L 25 mm thick PCC (1:2:4) Type B0 (using 12.50mm graded stone aggregate) as in roof over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed

M & L Rendering 10mm thick CM (1:3) with WPC @ 3% by weight of cement on fair faces of brick work or concrete or roof terrace surfaces including finishing the surfaces complete all as specified and directed. Note: Supply only WPC shall be measured and paid separately.

Supply only Integral waterproofing compound for waterproof plastering complete all as specified and directed.

M & L Priming the plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and laying the APP modified water proofing membrane as perIS 16540-2017/ IS 16532-2017 mineral finish, 3 mm thick and weighing not less than 3.8 kg/sqm reinforced with non woven polyester /HMHDPEmatt black finished over compatible primer/bonding bitumen with 100 mm overlap after necessary preparation of surface complete as per manufacturer’s instructions with bituminous aluminium paint on top @ 0.1ltr/Sqm.complete all as specified and directed.

S&F Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.complete all as specified and directed.

S & F Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work complete all as specified and directed..

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 Sqm Each etc including making good of hold fast holes with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Taking down cement plaster/roof felt etc on brick or stone walls, concrete surfaces roof,chajja,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Rendering 15mm thick in CM (1:4) using with water proof compound as per manufacturers instructions on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Supply only WPC shall be measured and paid separately.

M & L Preparation of newly plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 3 mm thick putty in two coats at any height complete all as specified and directed.

M & L Rendering 5mm thick CM (1:3) on brick work or concrete ceiling surfaces including finishing the surfaces complete all as specified and directed.

M & L Preparation of newly plastered surfaces and applying two coats of OBD (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M & L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation of new plastered wall surfaces and applying two coats of oil bound distemper (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Providing RCC (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

S&F Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding complete all as specified and directed.

S&F Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified and directed.

S & F Vitreous China full stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions. complete all as specified and directed.

S & F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 16 mm CPVC pipes SDR 11& Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F Glazed ceramic coloured wall tiles in vertical surface 300mmx600mmx 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick CM (1:3) backing coat complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of Each tile size 400mmx400mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

S & F Vitrified ceramic tiles dark shade double charged 10 mm thick (square/ rectangular) polished, area of Each tiles size s exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over with tile beedinf of matching colour as and where required and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

S & F Vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of Each tiles sizes exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick in CM (1:3) backing coat complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

S & F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs Grating doom 100mm dia of SS (Minimum weight 85gms) complete all as specified and directed.

M&L Making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make: Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

M&L Cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F Classic Glossy 6 Pin Cloth Hanger for Bathroom Wall Door Hooks For Hanging keys,Clothes Holder Hook Rail 6 complete all as specified and directed.

M & L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid finished even and smooth without using extra cement complete all as complete all as specified and as directed.

M & L Forming joints 75mm deep x 10mm wide, filled with grade 'A' sealing compound complete all as complete all as specified and as directed.

M & L Precast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves,plat form for WHB and similar articles with plain faces and set in CM(1:4) complete all as specified and as directed.

M&L Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in CM (1:3) cutting not exceeding 10cm girth complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M & L Providing PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as complete all as specified and as directed.

M & L Providing PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in floor sub base complete all as complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, fixed on walls/trenches complete all as specified and directed

S & F in repairs PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, laid in trenches /floors complete all as specified and directed.

S & F in repairs PVC (SWR) door Bend 75mm dia complete all as specified and directed.

S & F in repairs PVC (SWR) single T 75mm dia complete all as specified and directed.

S & F in repairs PVC (SWR) single T 110 mm dia complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) including removing debris beyond the premises including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition Stone slabs and tiles/granite tiles laid in cement mortar of any description or thickness in floors, aprons etc. including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :-HSWS-0100-01-Pure of M/s Sintex

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.

S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S & F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.

S & F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section complete all as specified and directed.

M & L 20mm thick kota stone topping with 4 to 7 mm size marble aggregate including grinding and polishing in floors for treating the surface with beeswax polish complete all as specified and directed.

S & F in repair vitreous china counter top WHB white of size 565x415x190mm or required size as approved and complete all as specified and as directed. Make: JAQUAR or equivalent model in Hindware /Parryware/CERA as approved.

S & F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : Cat No:FUS-CHR-29053 of Jaquar equivalent model in Hindware /Parryware/CERA as approved.

S & F in repair 150 X150 mm overhead shower completed all as specified and directed. Make Cat No OHS-CHR-1605 of Jaquar or equivalent as approved.

S & F in repair CP health faucet with 01 Mtr tube and hook complete all as specified and directed. Make : Cat No: ALD-CHR-579 of Jaquar equivalent model in Hindware /Parryware/CERA as approved.

S & F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: cat no: FON-CHR-40041 JAQUAR equivalent model in Hindware /Parryware/CERA as approved.

S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed Make: Cat No. FUS-CHR-29021 of Jaquar equivalent model in Hindware /Parryware/CERA as approved.

S & F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed

S & F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed

Taking up or down any dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

M & L Complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of OBD (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M & L Complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of OBD (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M & L Complete removal of existing treatment of external wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 3 mm thick putty in two layers at any height complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repairs PVC LDPE waste pipe 32mm dia 1m lengthcomplete all as specified and directed.

S & F in repairs 15mm bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Jaquar or equivalent make as approved

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

M & L Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through including rigid PVC conduit of dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one light/fan/Bell point controlled by one, one way switch 5A, SP complete all as specified and directed. Note: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per Item No.82 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No.82 above but one 3 Pin 5 Amps switch socket Independt board.

All as per Item No.82 above but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts. complete all as specified and directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts. complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S&F Sheet metal enclosure vertical type MCCB DB TPN 4 way double door with suitable rated bus bar 415 volts having degree of protection IP 43-IK 09 with metal double door , flush type made out of 1.2 mm CRCA sheet metal, duly powder coated confirming to IS 8623 includes 100 Amps MCCB with breaking capacity 16 KA as incomer and 01 Nos outgoing TP MCBs of 63 Amps and 09 Nos outgoing SP MCBs with neutral link including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: only MCB SP will be measured and paid seperately.

S&F in replacement factory made, distribution board, (MCB DB) TPN, 4 Way, having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral link including provision for MCB TPN as incomer and SP MCBs as outgoing and total number of modules equal to MCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: MCB TPN and MCB SP will be measured and paid seperately.

S &F MCB DB SPN 8 way Sheet metal enclosure with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F MCB, Single Pole Neutral (SPN) 40 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole Neutral (TPN) 40 to 100 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole Neutral (TP) 25 to 63 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed. Make: Philips Model BN021 LED12S PSU GR or equivalent model in Havells/Wipro/GE.

S & F in replacement of wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed. Make: Philips Model BN021C LED22S or equivalent make in Havells/Wipro/GE.

S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed. Make: Havells Model ENDURA SUNDOWN SL 25W LED 765 PASY BOPCIHD or equivalent model in Wipro/Philips/Surya/CG/Bajaj

M & L Submain wiring with two runs of single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one run of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note: Two runs of 6 sqm cable, one run of 6 sqmm cable as earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

S&F in replacement of metal body Exhaust fan of 300mm sweep of 1200 RPM, Air Delivery 650 CMM single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and directed. Note: Cutting of Hole/ glass window with machine if required at site shall be inclusive of rate quoted by the contractor.

VACON INFRASTRUCTURES (BID ID -3314422)

M/s GM Constructions (BID ID -3308443)

SRI SAI SIVA CONSTRUCTIONS (BID ID -3308557)

Squad 7 Projects and Services Pvt Ltd (BID ID -3304219)

SAI RAM CONSTRUCTIONS (BID ID -3308008)