MISC REPAIRS AND MAINTS TO BLDGS INCLUDING PLUMBING, JOINERY, SANITERY FITTINGS AND OTHER ALLIED CIVIL WORKS OF BLDGS AT OTM ACCN OF HQ 108 MTN BDE UNDER AGE B/R-I SUB DIVISION OF GE BRICHGUNJ

Amount

Taking down chowkhats or frames n. exc. 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed

All as per Item No 1 here in before but exc 1.5 and n. exc 4 sqm each.

Taking down shutters of any description n. exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2sqm each complete all as specified and as directed

Refixing shutters of any description n.exc 1 sqm each in same opening after easing, adjusting etc complete all as specified and as directed

Refixing shutters of any description exc 1 sqm and n.exc 2 sqm each in same opening after easing, adjusting etc complete all as specified and as directed.

Taking down aluminium chowkhats or partition frames of any description including glass panes, rubber packing, snap beading, particle board, shera plank etc available at site complete all as specified and as directed

Supply and fix Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood paneled shutters with panels of timber flat on both sides( feather edges) or of veneered particle board medium density , wood particle board with commercial face veneers supplied and fitted to chowkats factory made second class hard wood, chemically face veneers etc. complete all as specified and as directed

Supply and fix 35mm thick 2nd class hard wood glazed/ skeleton shutters open rebated and prepared to receive glass/ gauze etc. (without sash bars) edges of framing plain chamfered or round fitted with cut and mitred beads for securing glass gauze etc. and fitted to chowkats etc. complete all as specified and as directed.

Cutting holes for inserting hold fasts in PCC block masonry built in cement mortar and making good disturbed portion in PCC 1:2:4 type B1 (using 20mm aggregate) or in cement mortar 1:3 as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed by Engineer-in-charge.

Supply and fix 2nd class hard wood small fittings such as brackets, door stoppers etc articles not exceeding 200 Cubic centimetre Each, complete all as specified and as directed

Supply and fix in repairs aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified and as directed

Material and labour for Preparing surface of wood and wood based materials and treating ends of posts, backs of chowkats etc area tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm Each treated with tar or coal tar black paint, complete all as specified and as directed

Material and labour for synthetic enamel paint of two coats over a coat of pink primer incl preparation of new wooden surfaces over 10 cm width or girth complete all as specified and as directed.

Material and labour for one coat of synthetic enamel paint incl preparation of old wooden surfaces over 10 cm width or girth complete all as specified and as directed.

Supply and fix Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Supply and fix aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 5.5 mm thick figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 12 mm thick prelaminated particleboard exterior grade both side laminated and fixed to aluminium frame.

Supply and fix in repairs 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed by Engineer-in-Charge.

Supply only aluminium anodised fly proof mesh 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium straps complete all as specified and as directed .

Supply and Fix in repairs vertical venetian blinds made of 100% polyester fibres 10mm wide including two guide rollers and pulling ropes etc complete fixed to pelmet box etc all as specified and as directed by Engr-In-Charge.

Supply and fix in repairs 18/19 mm thick pre- laminated particle board exterior grade pre- laminated on both side with decorative choice lamination fixed with beading as in pelment box, cupboard shutter etc, complete all as directed by Engr-in-Charge

Material and labour in repair 12 mm plywood grade BWP, type BB fixed with beading and nails to timber frame as in partition in kitchen cabinet/cupboard shelfs, board etc all as specified and as directed by Engr-in-Charge.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden metal/ aluminium frames, including oil putty or removing beadings etc, complete all as directed by Engr-in-Charge

Supply and fix 4 mm thick sheet glass ordinary quality with oil putty not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fix 5.5 mm thick sheet glass ordinary quality with oil putty exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fix 4 mm thick figured glass with oil putty not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fix 4 mm thick figured glass with oil putty exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and Fix Butt hinges, of size 100mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed

Supply and Fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

Supply and fix Aluminium anodised, barrel tower bolt of extruded section of 100mm long complete all as specified and as directed.

Supply and fix 100mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply and fix 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Demolition of solid block masonry of any description complete all as specified and as directed

Material and labour for pre-cast cement concrete block PCC 1:3:6 type C1(20mm graded stone aggregate) masonry with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed

All as per item No 40 here in before but except blocks. Note: Fair blocks obtained from demolition shall be used.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc complete all as specified and as directed

Material and labour for rendering 10 mm thick in CM 1:6 finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 15mm thick external rendering in two layers of 5mm thick in CM (1:4) mixed with water proofing compound (water proofing compound shall be used as per manufacturer’s instructions) over a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately

Material and labour for removing loose and broken concrete by chiseling/picking etc upto a depth of 10 to 30mm from soffit of slab and similar structural members cutting edges clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water and removal of debris to a distance not exc 50m all as specified and including necessary scaffolding etc complete all as specified and as directed.

Material and labour for application of high build polymer sand mortar in 1:3 using with Nitobond SBR @5ltrs per 50kg cement on ceiling surfaces 10 to 20 thick in two layers surfaces over slurry priming coat of 1 volume Nitobond SBR to 1 volume water 3 volume fresh cement (5 sqm per litre nito bond SBR)all as per manufacturer’s instructions including preparation of surfaces, complete all as directed by Engr- in- Charge

Material and labour for taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises and apply water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing 3to 4Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note:- Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound

Supply and fix in repairs in patches GI wire netting 0.90 mm dia and 12 mm mesh n.exc 5 sqm each, lathing to wood or metal studding, joist, etc in walls, ceilings, stanchions, beams etc including all laps, cutting and waste complete all as specified and as directed

Material and labour for two coats of oil bound distemper over a coat of primer including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

Material and labour for two coats of oil bound distemper over a coat of primer including preparation of new plastered or unplastered surfaces of ceiling complete all as specified and directed by Engineer - in -Charge.

Material and labour for one coat of oil bound distemper including preparation of old wall surfaces complete all as specified and as directed.

Material and labour for two coats of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed.

Material and labour for one coat of weather proof exterior acrylic emulsion paint with antifungal property on old wall surfaces of any description after necessary brushing, scrubbing down smoke soot, moss and black and greasy spots complete all as specified.

Supply and fix in repairs aluminium alloy decorative type curtain rod complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs aluminium alloy curtain bracket for 20mm dia curtain rod decorative type complete all as specified and as directed.

Supply and fix in repair Butt hinges, of size 100 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed

Supply and fix in repairs Butt hinges, of size 75 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and as directed

Supply and fix in repair Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed

Supply and fix in repair Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

Supply and fix in repair Aluminium anodised, barrel tower bolts of extruded section of 100 mm long complete all as specified and as directed

Supply and fix in repair 100mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply and fix in repair 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply & fix in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed

Supply and fix in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80kg all as specified and as directed

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty madn fixed complete all as specified and as directed.

Supply and fix in repair floor door stopper of length of cover plate 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix framed work such as grills, gratings etc with ends of bars or riveted framed guard bars barred iron fixed independently in wooden frames or in drain cover conforming to IS 2062 and grade Fe-290 E- 165 complete all as specified and as directed.

Supply and fix MS work as in tubular trusses incl posts etc special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade st 240 complete all as specified and as directed.

Supply and fix for rolled MS structural steel work of MS plates, angles, channels etc, fixed as in purlins, brackets rafters etc confirming to Fe-290 (grade E-165) complete all as specified and as directed

Supply and fix mild steel flat iron such as hold fasts, wind ties, wall tiles etc conforming to IS-2062 and grade E-165 (Fe-290), complete all as specified and as directed

Material and labour for two coats synthetic enamel paint over a coat of red oxide primer on newly steel surfaces complete all as specified and as directed.

Material and labour for one coat synthetic enamel paint on old steel surfaces complete all as specified and as directed.

Dismantling of plain or corrugated roof sheeting of any description, gauge, thickness, including nut, bolts in roof coverings complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, eaves board etc complete all as specified and as directed.

Supply and fix 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L or J type cranked hook bolts and washers with grade of zinc coating complete all as specified and as directed.

Supply and fix plain galvanised mild steel sheeting 0.63 mm thick as in ridges with grade of zinc coating complete all as specified and as directed

Supply and fix 0.56mm plain aluminium sheeting , alloy 31000H4 in ridgesm hips, , valley gutters drip and straight flushing (length and girth as fixed) complete all as specified and as directed

Supply and fix in repair 12mm plywood grade BWP, type BB fixed with beading and screwed to frame of any description as in eaves board etc complete all as specified and as directed

Supply and fix in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling including two coat of oil bound distemper over a coat of primer complete all as directed and as directed.

Material and labour for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on surfaces incl dismantling existing ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets/ frames of any description, complete all as specified and as directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and as directed

All as per item No. 84 here in before but 1000 Ltrs capacity

Supply and fix in repairs 20 mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142gms, complete all as specified and as directed

Supply and fix in repair gun metal gate valves with iron wheel head, screwed both ends for iron pipes of dia 20mm complete all as specified and as directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed

Material and labour for 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed

Material and labour for 15mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises, complete all as specified and as directed

Material and labour light shade coloured vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick CM 1:6, complete all as specified and as directed.

Supply and fix non skid coloured ceramic tiles area of each tiles exc. 0.06 Sqm but n.exc 0.11 Sqm, set and jointed in neat cement slurry in floors and pointed with coloured cement to match including cement mortar screed bed 15 mm thick 1:6, complete all as specified and as directed

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick, square or rectangular shape, area of each tiles exc. 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry in floors and pointed with coloured cement to match, over and including cement mortar screed bed 15mm thick (1:6) complete all as specified and as directed

Material and labour for glazed coloured ceramic tiles of size 300 x 200 x 7mm thick, on vertical surfaces such as skirting dados and risers to steps etc, including 10mm thick rendering in cement plaster 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed

Material and labour light shade coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm,as in skirting of floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 10mm thick 1:4, complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick, square or rectangular shape, area of each tiles exc. 0.11 Sqm but n.exc 0.18 Sqm, as in skirting of floors etc, set and jointed in neat cement slurry and pointed with coloured cement to match, over and including cement mortar screed bed 10mm thick (1:4), complete all as specified and as directed

Material and labour for 20mm thick Granite of any type work table rubbed and polished in pillars, steps, platform, etc. including taking down and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 20mm thick CM (1:4) complete all as specified and as directed

Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) including taking down for wall lining (veneering to wall) 15 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Material and labour for 75mm thick plain cement concrete (1:4:8) Type D2, (using 40mm graded stone aggregate) as in sub base of flooring etc, finishing the surface even and rough complete all as specified and as directed.

Material and labour glazed chequered cement concrete tiles 300x300mm x 25mm thick size set, jointed and pointed in neat cement slurry including 20mm thick in CM 1:6 bedding layer of mortar complete all as specified and as directed.

Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed

Supply and fix in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed

Supply and fix in repairs viterous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed

Supply and fix in repair brass chromium plated bottle traps 32 mm bore of trap for wash hand basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed

Supply and fix in repair glass corner shelf, 30cm wide, with suitable D brackets complete all as specified and as directed.

Supply and fix in repairs stainless steel gratings 125 mm dia, complete all as specified and as directed

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated, pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed.

Supply and fix in repairs Stop valve, cast copper alloy, 15mm dia, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union as in repair complete all as specified and as directed

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed

Supply and fix in repair 15mm bore swan neck pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed

Supply and fix in repairs chromium plated, Brass towel rack with single rail as per Cat No. 1581 of Jaquar, complete all as specified and as directed.

Supply and fix in repairs chromium plated, stainless steel towel rings, 200mm dia complete all as specified and as directed.

Supply and fix in repairs hand shower (Health Faucet) 1 meter, with PVC tube with wall hook complete all as specified and as directed

Supply and fix in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed

Supply and fix in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed

Supply and fix in repairs brass CP Stop Cock (concealed type) 15mm dia bore with long shank and cup all as per complete all as specified and as directed

Supply and fix in repairs vitreous China urinal, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed.

Supply and fix in repair vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed

Supply and fix in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed

Supply and fix in repair PVC waste pipe, 32mm dia, for WHB complete all as specified and as directed

Supply and fix in repair PVC waste pipe, 32mm dia, for urinal complete all as specified and as directed

Supply and fix in repair PVC waste pipe 40mm dia for kitchen sink, complete all as specified and as directed

Supply and fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed

Supply and fix in repair stainless steel 1.0mm thick plate rack of size 787mm x 762mm and depth 25cm of approved make incl fixing in walls with suitable screws, wooden plugs incl all necessary arrangements etc complete all as directed by Engr-in-Charge.

Supply and fix kitchen in repairs sinks with drainage boards, ISI marked [As per IS 13983- 1994] made of stainless steel of AISI 304 grade 18/8 qualilty, 1mm thick with plugs, washers & wastes, including in cement mortar 1:3 to dwarf wall or incl fixing cantilever brackets and connecting union to pipes overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engr in Charge.

Supply and fix in repairs vitreous china EWC model CASCADE type in approved colour all as specified and directed as per ISI standards complete all as specified and as directed. (Cat Part No P2207PW of Johnson or equivalent in Parryware / Hindustan/Cera)

Supply and fix in repairs plastic seat cover for EWC solid type water closet set white colour complete all as specified and as directed.

Supply and fix in repair internal kit of syphone for flushing cistern, CASCADE type, complete all as specified and as directed.

Supply and fix in repairs CI bend 100mm dia with door access branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks complete all as specified and as directed

Supply and fix in repairs CI bend 75mm dia door access branch piece, 75mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipes 110mm dia bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed

All as per item no.136 here in before but 75mm dia

Supply and fix in repairs PVC bends of any radius, 110mm bore complete all as specified and as directed

All as per item No. 138 here in before but 75mm dia

Supply and fix in repairs PVC bends of any radius 110mm dia with oval access door all as specified and as directed by Engineer-in-Charge.

All as per item No.140 here in before but 75mm dia

Supply and fix in repairs 110mm bore PVC (SWR) junction, (Single 'T') equal or unequal all as specified and as directed by Engineer-in-Charge.

All as per item No. 142 here in before but 75mm dia

Cleaning and removing all scale and dirt etc from 500 ltrs capacity water tanks and from mouths of circulating pipes etc. complete all as specified and as directed

Cleaning and removing all scale and dirt etc from 1000 ltrs capacity water tanks and from mouths of circulating pipes etc. complete all as specified and as directed

Material and labour for 40mm thick cement concrete 1:2:4 Type B1 (20mm graded stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and as directed

Material and labour for 3 to 4mm thick 38mm deep glass dividing strips provided between the floor panels not exc size 2m. The glass dividing strips shall be ground smooth with stone and shall be laid flush with the floor level complete all as specified and as directed.

Material and labour 75 mm thick PCC 1:3:6 type C1 (using 20mm graded agg) as in floor/ path /plinth protection etc. complete all as specified and as directed

Dismantling boarding of any description, fixed in any position with nails/ screws complete all as specified and as directed.

Supply and fix aluminium composite panel sheet of 3 to 4 mm thick as in wall cladding & false ceiling, fixed on aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30 mm, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant. The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. (Note: Necessary frame work will be measured and paid separately)

P Babu

RADHA GOVIND CONSTRUCTION

Priya construction

DEEPAK AGENCIES