Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | ₹34.8 L | L1 | Accepted-AOC BEING L1 |
| Sl No | Description | Qty | Unit | INDIA TRADE ENGINEERING L1 |
|---|---|---|---|---|
| 1.00 | Complete removal of paintings from runway surface using waterblasting cum vacuuming system with suitable operating pressure so that the total paintings/markings are removed from runway both (Rigid) surfaces by the method of water blasting cum vacuuming system with suitable water pressure without use of any chemical and without any damage to the existing runway surface complete all as specified and directed. Notes:-
(i) The work shall be carried out through experienced & qualified agency(s). (ii) Machineries deployed shall be got approved by GE in writing before execution.
(iii) Complete paintings shall be removed from surface of the runway and the Debris / Water to be vacuumed simultaneously leaving No FOD so as to ensure that the Runway is available for operation immediately. | 3,860 | SQM | 791 ₹30,53,260 Lowest |
| 2.00 | M&L for preparation of surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows, figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with two coats of water based acrylic road marking paint (white/golden yellow/orange/black) as per manufacturer's instructions,complete all as specified and directed. | 1,770 | SQM | 50 ₹88,500 Lowest |
| 3.00 | S&F in repair DTGM board size 1219mm x 1524mm made of engineering polymer having monolithic structure to withstand tempeture variation from extreme cold environment to sweating hot condition and meet the frangibility requirment specified for object in runway strip Structure should be specified for object in runway strip structure should be specially reinforced with antimony trioxide and methl amine acrylat to with stand high velosity wind and three legs 50 x50x6mm angle iron of height 450mm with and including pasting of illumminated radium sticker for alphabet or numerical on both side of board accordance with ICAO including removing of existing DTGM all as directed by Engineer in Charge. Note:- 300mm wide 300mm thick PCC (1:3:6) concrete plith shall be constructed all around the DTGM all as specified and as directed by Engineer in Charge. | 6 | Each | 31,000 ₹1,86,000 Lowest |
| 4.00 | S&F in repair DTGM board size 1219mm x 1524mm made of engineering polymer having monolithic structure to withstand tempeture variation from extreme cold environment to sweating hot condition and meet the frangibility requirment specified for object in runway strip Structure should be specified for object in runway strip structure should be specially reinforced with antimony trioxide and methl amine acrylat to with stand high velosity wind and three legs 50 x50x6mm angle iron of height 450mm with out pasting of illumminated radium sticker for alphabet or numerical on both side of board accordance with ICAO including removing of existing DTGM all as directed by Engineer in Charge. Note:- 300mm wide 300mm thick PCC (1:3:6) concrete plith shall be constructed all around the DTGM all as specified and as directed by Engineer in Charge. | 5 | Each | 31,000 ₹1,55,000 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Sept 2025, 6:00 pmClosed
Major MK Yadav, GE
GE (AF) Kalaikunda PO Kalaikunda Air Field Dist Paschim Medinipore State West Bengal Pin 721303
REPAIR TO DTGM BOARD AND REMOVAL OF PAINTING FROM DISPERSAL, LOOPS AND CERTAIN OTHER AIRCRAFT MOVEMENT AREA AT AF STN KALAIKUNDA
2025_MES_726232_1
C/8172/E8
Open Tender
Civil Works
Item Rate
180 days
AF STN KALAIKUNDA
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE AF KALAIKUNDA
₹80,000
Yes
6 Dec 2025
14 Aug 2025
20 Sept 2025
14 Aug 2025
17 Sept 2025
29 Aug 2025
Amount
Complete removal of paintings from runway surface using waterblasting cum vacuuming system with suitable operating pressure so that the total paintings/markings are removed from runway both (Rigid) surfaces by the method of water blasting cum vacuuming system with suitable water pressure without use of any chemical and without any damage to the existing runway surface complete all as specified and directed. Notes:- (i) The work shall be carried out through experienced & qualified agency(s). (ii) Machineries deployed shall be got approved by GE in writing before execution. (iii) Complete paintings shall be removed from surface of the runway and the Debris / Water to be vacuumed simultaneously leaving No FOD so as to ensure that the Runway is available for operation immediately.
M&L for preparation of surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows, figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with two coats of water based acrylic road marking paint (white/golden yellow/orange/black) as per manufacturer's instructions,complete all as specified and directed.
S&F in repair DTGM board size 1219mm x 1524mm made of engineering polymer having monolithic structure to withstand tempeture variation from extreme cold environment to sweating hot condition and meet the frangibility requirment specified for object in runway strip Structure should be specified for object in runway strip structure should be specially reinforced with antimony trioxide and methl amine acrylat to with stand high velosity wind and three legs 50 x50x6mm angle iron of height 450mm with and including pasting of illumminated radium sticker for alphabet or numerical on both side of board accordance with ICAO including removing of existing DTGM all as directed by Engineer in Charge. Note:- 300mm wide 300mm thick PCC (1:3:6) concrete plith shall be constructed all around the DTGM all as specified and as directed by Engineer in Charge.
S&F in repair DTGM board size 1219mm x 1524mm made of engineering polymer having monolithic structure to withstand tempeture variation from extreme cold environment to sweating hot condition and meet the frangibility requirment specified for object in runway strip Structure should be specified for object in runway strip structure should be specially reinforced with antimony trioxide and methl amine acrylat to with stand high velosity wind and three legs 50 x50x6mm angle iron of height 450mm with out pasting of illumminated radium sticker for alphabet or numerical on both side of board accordance with ICAO including removing of existing DTGM all as directed by Engineer in Charge. Note:- 300mm wide 300mm thick PCC (1:3:6) concrete plith shall be constructed all around the DTGM all as specified and as directed by Engineer in Charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .