ADDITION ATLERATION AND IMPROVEMENT TO BLDG No P-145 (DROMI SERVANT QUARTERS-21 NOS), IN DRDO TOWNSHIP, PHASE-I, C V RAMAN NAGAR, BANGALORE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, separating and stacking the serviceable material and disposing the unserviceable material outside MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and disposing the unserviceable material outside MD land complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4.00 sq m each all as specified and as directed.

Dismantling of composite steel windows/ventilators not exceeding 0.5 sq m each, single leaf double shutter with fixed portion including glass panes, mosquito proof mesh, guard bars etc., complete all as specified and as directed.

Dismantling of composite steel windows/ventilators exceeding 0.5 Sq m and not exceeding 1.5 sq m each, double leaf double shutter with fixed portion including glass panes, mosquito proof mesh, guard bars etc., complete all as specified and as directed.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, ceiling fittings, bulk head fittings, tube lights fittings etc., and removing materials out of site and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

Excavating in trenches, in soft/ loose soil , not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out complete all as specified and as directed.

Returning, filling in (using soils), including spreading, levelling, watering and well ramming soft/ loose soil in layers not exc 25 cm complete all as specified and as directed

Removing excavated surplus soil to a distance exceeding 50 M but not exceeding 100 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Material and labour, for Plain Cement Concrete, (1:4:8), type D2, using 40 mm graded stone aggregates as in foundations, including necessary forms and moulds all as specified and as directed.

Material and labour, Precast RCC 1:2:4 type B1 (using 20mm stone aggregate) as in cover slab of drain, culvert and the like, set in CM 1:4 all as specified and as directed. Note: Reinforcement shall be measured and paid separately under relevant item of this schedule

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:2:4) type B1, using 20 mm graded stone aggregate as in coping, benching and the like including necessary formwork etc complete all as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed.

Material and labour for, Plain Cement Concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in surface channels, including necessary formwork, complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Supply and fix, 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Plain framed, paneled shutter (two panel) with lock rail and panel of 12 mm B.W.P. commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.

Material and labour for powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose, weight of aluminium section only shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate and nothing extra will be measured and paid,, iii) Supply and fixing of Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Supply and fix, butt hinges, 100 mm long, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix, Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.

Supply and fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix, 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix, Floor door stopper, 150 mm length of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Taking down existing curtain rod, Supply and fixing, mild steel chromium plated curtain rod 12 mm dia, (wall thickness not less than 0.63 mm), bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Note : Price shall not be less than 75/- per RM, Make : Aerolux / Vista / MEC)

Taking down brackets for curtain rod, supply and fixing brackets suitable for drapery rod of 12 mm dia, bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Make : Aerolux / Vista / MEC)

Supply and fix, Pressed steel door frame of size 125 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply, fabrication and fixing of mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for, TMT bars of 10 mm dia and over, as in reinforcement, cut to length , bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in panels, inishing the surfaces even and fair without using extra cement complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 (using 20mm graded crushed stone aggregate) as in paving laid in panels, and joints filled with bitumen and sand mixed in 1:3 by weight, finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in sub base / flooring, etc., finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, for 25 mm thick Plain Cement Concrete (1:2:4), type B0, using 12.5 mm graded stone aggregates as in flooring, etc., finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match the colour of tiles including screed bed of 15 mm thick in CM 1:6, laid complete all as specified and as directed.

Material and labour, glazed Ceramic, coloured tiles, (Grade B-IIA), of size 300 x 600 x 8- 10 mm thick, as in vertical surfaces such as dado / skirtings, etc., set and pointed in white or coloured cement to match the colour of tiles including backing coat of 15 mm thick in CM 1:4, laid complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.11 sq m but not exceeding 0.18 sq m, as in flooring, set and pointed in white or coloured cement to match the colour of tiles including screed bed of 15 mm thick in CM 1:6, laid complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.11 sq m but not exceeding 0.18 sq m, as in vertical surfaces like skirting / dado, etc., set and pointed in white or coloured cement to match the colour of tiles including screed bed of 15 mm thick in CM 1:3, laid complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position, providing material and labour, for 20 to 25 mm thick, mirror polished machine cut Kota stone slab as in flooring, over and including screed bed in cement mortar 15 mm thick in CM (1:6) set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position, providing material and labour, for 20 to 25 mm thick, mirror polished machine cut Kota stone slab as in skirting / dado, over and including backing coat in cement mortar 15 mm thick in CM (1:3) set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Material and labour, for machine pressed, Plain cement concrete commercial tile flooring with tiles of size 25 cm x 25 cm x 20-22 mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry, over and including screed bed of 15 mm thick in CM (1:4) complete all as specified and as directed.

Material and labour for, rendering 15 mm thick on brick or concrete surfaces in CM 1:3 including mixing approved liquid water proofing compound, finishing the surfaces even and smooth without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.

Materila and labour for, rendering 15 mm thick on stone masonry surfaces of walls, in cement mortar (1:6) and finishing the surfaces fair and even, complete all as specified and as directed.

Materila and labour for, rendering 15 mm thick on brick / concrete masonry surfaces of walls, in cement mortar (1:6) and finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed.

Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Materila and labour for, rendering 10 mm thick on stone masonry surfaces of walls, in cement mortar (1:4) and finishing the surfaces fair and even, complete all as specified and as directed.

Preparation of new or previously untreated plastered ceiling surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall care putty (not exceeding 1.5 mm thick in a coat) , complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall care putty (not exceeding 1.5 mm thick in a coat) complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of newly plastered wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of weather proof exterior emulsion paint over a coat of weather proof primer complete all as specified and directed.

Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with and including neoprene packing fixed to aluminium windows / ventilators with aluminium cleats (channel) area not exceeding 0.5 sq. m in each pane all as specified and as directed.

Supply and fix Figured glass, 4 mm thick, pin head type and glazing with and including neoprene packing fixed to aluminium windows / ventilators with aluminium cleats (channel) area not exceeding 0.5 sq. m in each pane all as specified and as directed.

Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Complete removal of existing treatment from surfaces of ceilings by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall internal grade wall care putty, (not exceeding 1.5 mm thick in a coat) finishing surfaces even and smooth, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls, pillasters, cornices, etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall internal grade wall care putty, (not exceeding 1.5 mm thick in a coat) finishing surfaces even and smooth, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls, pillasters, cornices, etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of weather proof anti-fungal exterior emulsion paint over a self coat of weather coat primer, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.

Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall deemed to be included in quoted rate.

Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall deemed to be included in quoted rate.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Supply and fix UPVC (SWR) bends any radius 75 mm dia without access door, fixed in pipes, complete all as specified and as directed.

Supply and fix, 75 mm bore, UPVC (SWR) junction, Single 'T' equal or unequal with access door, complete all as specified and as directed.

Supply and fix, 110 mm bore, UPVC (SWR) junction, Single 'T' equal or unequal with access door, complete all as specified and as directed.

Supply and fix, UPVC (SWR) vent cowl of bore 110 mm dia, complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, complete, all as per Make : Cera, Cat No .S3010102 of CALINA make or techno commercially equivalent in other makes specified complete all as specified and directed.

Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and jointing with existing flush pipe and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010101 of CERA Make or techno commercial equivalent in other makes complete all as specified and directed.

Supply and fix Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. HT F3001151 of Cera or equivalent in other makes specified complete after taking down old bib taps all as specified and as directed.

Supply and fix Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. HT F3001103 of Cera or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.

Supply and fix in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed. MAKE:- Cat No. HT F3001201 of CERA or techno-commercially equivalent model in any one of the make as mentioned in list of makes here-in-after.

Supply and fix in repairs, Stop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as per Cat No.HT F4050103 & HT F3001351 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 95 mm with swivel joints, over head shower arm of 230 mm long with wall flange, complete all as specified and as directed. Make : Cera Cat Part No F7020304 & F7040103 or techno and commercial equivalent in other makes specified after taking down old shower rose complete all as specified and as directed.

Supply and fix in repairs, Vitreous china snow white, wash hand basin (without pedestal) of size 630 mm x 450 mm all as per Cat No. No. S2040104 of Cera or techno and commercial equivalent makes specified including supply and fixing PTMT waste coupling of 32 mm dia (minimum weight 32-45 grams), including 32 mm dia PVC waste pipe of minimum 800 mm long all as specified and as directed.

Supply and fix in repairs, 40 mm dia, high density PVC flexible waste pipe with sockets suitable for wash hand basin, sinks, etc., 90 cm long, complete all as specified and as directed.

Supply and fix, Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm dia 32 - 45 gms) complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe including necessary cutting/threading the old pipe and provision of new fittings such as Tee, socket, elbow, union if required complete all as specified and as directed.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed. Make : CERA, Model No F5003103 or techno and commercial equivalent complete all as specified and as directed.

Supply and fix, PVC connecting pipe 450 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.

Dismantling of unserviceable multi floor trap, supply and fix UPVC(SWR) multi floor trap 75 mm dia outlet with grating, including jointing with solvent cement complete all as specified and as directed.

Dismantling of unserviceable floor trap, supply and fix UPVC(SWR) floor trap 75 mm dia outlet with plain / single hole, CP grating, including jointing with solvent cement complete all as specified and as directed.

Dismantling of unserviceable Nahani trap, supply and fix UPVC(SWR) Nahani trap 75 mm dia outlet with plain / single hole, CP grating, including jointing with solvent cement complete all as specified and as directed.

Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 750 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position, including PTMT ball valve, high pressure, epoxy coated aluminium rod and high density plastic ball screwed for pipe of 20 mm dia complete all as specified and as directed.

Material and labour for Concealed Point wiring with PVC insulated unsheathed, multi stranded copper conductor FRLS cable of size 1.5 sq.mm, 1100 grade, with PVC insulated unsheathed multi stranded copper conductor cable of size 1.5 sq.mm for earth continuity wire, drawn into and including non metallic rigid PVC conduit of suitable size, medium grade ISI marked including metal flush boxes of suitable size, modular white cover plate and provision of blanking plates fixed with screws for mounting switches/ sockets etc fixed on walls/ roof surface concealed in walls including all necessary wall cutting and making good disturbed surface complete all as specified and directed for One light / fan / Bell point controlled by one, one way switch 5/6 Amps complete all as specified and as directed. Note : The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per requirement and making the disturbed surfaces to match with the existing.

All as per Serial Item No 92 here-in-above, but for one 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch.

All as per Serial Item No 92 here-in-above, but for one 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

All as per Serial Item No 92 here-in-above, but using 4 sq mm size cable, for one 3 pin, 6/16 amps socket outlet point on independent board controlled by one, one way 6/16 amps switch.

Supply and fix Modular Switch, 6 Amps, 240 Volts, One module, One way, all as specified and as directed.

Supply and fix Modular Switch, 16 Amps, 240 Volts, One module, One way, all as specified and as directed.

Supply and fix PVC Ceiling rose surface type, Bakelite, 65 x 50 mm, ISI marked, with three terminals all as specified and as directed.

Supply and fix Modular socket, 2 module, one way, 5 Amps, 5 pin, 240 Volts all as specified and as directed.

Supply and fix Modular type socket flush type, 3/5 pin, two module, 6 / 16 Amps, complete all as specified and as directed.

Supply and fixing modular bell push, 6 Amps, 1 module complete all as specified and as directed.

Supply and fixing modular type, call bell, SP, AC 230 V, multi music type complete all as specified and as directed.

Supply and fix electronic fan regulator, 2 Module, 120 W complete all as specified and directed.

Taking down unserviceable MCCB DB, supply and fix, MCCB DB VTPN 4 way (Vertical type), double door, with Sheet metal enclosure, flush mounted, prewired, 415 V, AC, 50 Hz, Factory made, powder coated, IP protection, universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, with and including MCCB FP 63 Amps, 415 V, 25 kA rupturing capacity as incomer, complete all as specified and as directed. Make : Cat Part No DHDLVDRWGOFO04 of Havells or techno commercial equivalent of approved makes specified here-in-after. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) Cost of MCB's shall be measured and paid under respective item. .

Supply and fixing, MCCB TP, 63 Amps, working on 440 volts, 50 Hz AC supply, 16 kA breaking capacity, complete, all as specified and as directed.

Taking down unserviceable MCB DB, supply, fixing and connecting MCB DB SPN 4 way (Horizontal), double door, 240 V, AC, 50 Hz, IP-42 protection conforming to IS-13032 universal mounting with 200 amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc complete Cat Part No DHDPSHODRW04 of Havells or equivalent in approved makes and flush to wall by grouting of wall complete all as specified and directed. Note : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs ii) MCB/ Isolators will be measured and paid separately as supply only under respective items.

Supply only MCB, SP, 6 to 32 Amps, 240 volts, 50 Hz, 10 KA rupturing capacity, ‘C’ series all as specified and as directed.

Supply only MCB, SPN, 32 Amps, 240 volts, 50 Hz, 10 KA rupturing capacity, ‘C’ series all as specified and as directed.

Taking down existing submain wiring, providing material and labour, for Sub main wiring using FRLS grade PVC insulated unsheathed, 1100 volts grade, stranded copper conductor cable, 2 runs of single core of size 4 Sq mm and one run of earth continuity conductor of size 2.5 Sq mm to be drawn through and including 20 mm PVC conduit medium Grade fixed concealed in walls / roof / floors complete all as specified and as directed. NOTE: - 2 runs of 4 sq mm cable, one run of 2.5 sq mm earth wire and one run of PVC conduit shall be measured as one length.

Taking down existing submain wiring, providing material and labour, for Sub main wiring using FRLS grade PVC insulated unsheathed, 1100 volts grade, stranded copper conductor cable, 2 runs of single core of size 1.5 Sq mm and one run of earth continuity conductor of size 1.5 Sq mm to be drawn through and including 20 mm PVC conduit medium Grade fixed concealed in walls / roof / floors complete all as specified and as directed. NOTE: - 2 runs of 1.5 sq mm cable, one run of 1.5 sq mm earth wire and one run of PVC conduit shall be measured as one length.

Supply and fix, LED, 20Watt, high efficient, batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient poly-carbonate diffuser, in-built electronic driver duly wired up to terminal block, power consumption less than or equal to 20W, luminaire lumen greater than or equal to 1000lm, system efficiency greater than or equal to 100lm/w, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, ingress protection IP 20, colour rendering index CRI > 80%, temperature range 0-45 degree centigrade, driver efficiency > 85% power factor > 0.90, THD < 20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5KV, 50000 burning hours (minimum) as per L70 criteria, multi-stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard with LM70 & LM80 certification, complete all as specified and directed. MAKE:- Cat No. LHEXBXPNIN1W020 of Havells or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG / HALONIX / JAQUAR

Supply and fix, LED, 9/10 Watt, high efficient, batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient poly-carbonate diffuser, in-built electronic driver duly wired up to terminal block, power consumption less than or equal to 9/10 W, luminaire lumen greater than or equal to 1000lm, system efficiency greater than or equal to 100lm/w, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, ingress protection IP 20, colour rendering index CRI > 80%, temperature range 0-45 degree centigrade, driver efficiency > 85% power factor > 0.90, THD < 20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5KV, 50000 burning hours (minimum) as per L70 criteria, multi-stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard with LM70 & LM80 certification, complete all as specified and directed. MAKE:- Cat No. LHEXBXPNIN1W010 of Havells or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG / HALONIX / JAQUAR.

Supply and fix, LED building security light fittings with lamp, 15 W, IP 65, with high lumen output, environmental friendly, energy efficient LED, street light fitting with lamps and accessories, IP 20 protection Class I, system electrical efficiency > 85%, system efficacy > 100 lm/W, operating voltage between 140 - 270 V, AC, 50 Hz, TDH, 10%, power factor ≥ 0.95, surge protection 2.5 kV, colour temperature 5700 K, CRI > 80, intergral drivers, fixed with GI bracket made of 32 mm dia light grade 1.5 m long and fixed on walls / floors with clamps, fittings as per Cat No ENDURAPEARLSL15WLED757SASYTOPC of make Havells or or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG / HALONIX / JAQUAR

Supply and fix, lamp holder PVC/polycarbonate type with black plate, suitable for 6 W LED lamp (including 9 watt lamp) complete all as specified and as directed.

Supply and fix, Ceiling fan BEE 5 star rated complete 1200mm sweep, energy efficient suitable to function on 230V, single phase, AC supply, white colour, with down rod 300mm long, capacitor 2.5 mfd, canopies, nuts, bolts and washers and connecting with and including provision of 3 core 1.5 sq.mm PVC sheathed flexible copper conductor from ceiling, writing MES number on ceiling fan motor complete all as specified and directed. MAKE:- Auro Plus of Crompton Greaves or techno-commercially equivalent model in BAJAJ / HAVELLS / USHA

Supply and fix, exhaust fan 230/240 Volt, 50 Hz, single phase, AC supply, 300 mm sweep with louvers, including drilling hole in existing wall, making good the disturbed surfaces and matching with adjacent surfaces, complete with metal body powder coated with protective steel bird guard on wall of building with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor using synthetic enamel paint of approved tint, complete all as specified and directed. MAKE:- Model: Ventil Air-DSP of Havells or techno-commercially equivalent model in Almonard / Bajaj.

Demolishing old earthing pit, and providing new earthing pit with material and labour for earthing complete with Galvanized Iron earth plate electrode 600 mm x 600 mm x 6.3 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to earthing test point all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 40 mm bore light grade GI pipe for watering funnel wire mesh, PCC chamber in cement concrete (1:3:6), type C1 , manhole cover with RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both ways for cover and MS frame etc., complete all as specified and as directed NOTES :- (i) The quoted rate deemed to include earth wire and protection pipe up to 7.5 metre from earth plate / earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Supply and fix, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed.

Solar Electricals and Electronics

C R R CONSTRUCTIONS

HRML CONSTRUCTIONS

SREE BUILDERS

MAJ CONSTRUCTIONS

Lucky Enterprises