Construction of New Director Residence and provision of washroom National Institute of Technology Kurukshetra

Bill of Quantity for Construction of New Director's Residence and provision of washroom at NIT Gate towards KUK side of National Institute of Technology Kurukshetra,

1.) BOQ for Construction of New Director's Residence at National Institute of Technology Kurukshetra, Haryana

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

I 2.0 EARTH WORK

CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking

of Earth up to 5 km

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

3 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and cum 102.56 196.00 20,101.76

watering, lead up to 50 m and lift up to 1.5 m.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15

cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

5 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. -

II 4.0 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2

7 4.11 coarse sand (zone-Ill) derived from natural sources: 4 graded stone aggregate 20 mm nominal sqm 38.44 495.75 19,056.63

size derived from natural sources).

Extra for providing and mixing water proofing material in cement concrete work in doses by of 50kg

weight of cement as per manufacturer's specification. cement

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality

9 4.13 using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and sqm 38.44 146.15 5,618.01

finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-

III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from

10 4.17 natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and sqm 78.00 749.30 58,445.40

consolidated and grouted with fine sand, including necessary excavation, levelling & dressing &

finishing the top smooth.

III 5.0 REINFORCED CEMENT CONCRETE

11 5.9 Centering and shuttering including strutting, propping etc. and removal of form for -

11.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 43.68 392.15 17,129.11

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

11.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 444.34 927.25 4,12,014.27

11.4 5.9.4 Shelves (Cast in situ) sqm 4.62 927.25 4,280.19

11.5 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 347.49 736.40 2,55,894.19

11.6 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 331.41 961.30 3,18,586.45

11.7 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 26.10 764.95 19,965.20

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks and the like

11.9 5.9.16 Edges of slabs and breaks in floors and walls -

13.10 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 23.14 951.10 22,005.60

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

12.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 3927.56 107.85 4,23,587.35

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete above plinth level.

13.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 6714.70 107.85 7,24,180.40

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement.

15.1 5.33.1 All works upto plinth level -

a 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 66.71 9,504.75 6,34,061.87

15.2 5.33.2 All works above plinth level upto floor V level -

a 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 114.05 9,860.40 11,24,578.62

IV 6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

16.1 6.1.2 Cement mortar 1:6 (1 cement :6 coarse sand) cum 1.06 7,132.25 7,560.19

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in:

17.1 6.4.2 Cement mortar 1:6 (1 cement :6 coarse sand) cum 105.17 9,105.95 9,57,672.76

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor Vlevel.

18.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 78.25 1,123.80 87,937.35

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

V 8.0 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

20 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

21 8.2.2 Granite stone slab colour black, Cherry/Ruby red -

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

22 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved -

by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

23 8.4 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. metre 5.17 568.55 2,939.40

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing of

cut edges etc. complete.

VI 9.0 WOOD AND P. V. C. WORK

Providing and Fixing of (A2Z Infra Solutions/Elixir Metform Pvt. Ltd./Lakshmi Fabrications) double

rebate door frame fabricated from sections roll formed out of 1.2mm thick galvanized steel (Base

steel as per IS 513) with zinc of 120 gms/sq.mtr.

The overall size of the section should be 125x60mm.

The frame section should be cut to length and meter joined with corner brackets made of CRCA

The frame should be provided with .

25.0 MR (a) 3 Nos. of M.S. powder coated 4” Butt hinges of 2mm thickness welded to the main frame. Rmt 103.45 850.00 87,932.50

(b) 6 Nos. of 1.2mm thick CRCA electroplated stiffeners should be welded to frame.

(c) 6 Nos. of 8” M.S. hold fasts with split end tail welded to stiffener plates

(d) One no. aldrop receiver.

(e) Each frame should be provided with 25x50mm tie rod at bottom.

All welded places should be treated with protective coat of zinc rich primer.

The entire frame should be provided with a coat of etch primer.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

26.1 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 40.92 2,392.65 97,907.24

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

of flush door shutters (over all area of door shutter to be measured).

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

28 9.96 than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts -

and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

29 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary -

screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade

30 9.100 AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with ecessary screws -

etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating

31 9.101 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, -

with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 18.00 72.35 1,302.30

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six

32 9.103 levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) each 3.00 868.95 2,606.85

aluminium lever handles of approved quality with necessary screws etc. complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/

33 9.127 suede finish with high density protective surface layer and reverse side of adhesive bonding -

quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

34 9.147.C1 Fixed window I ventilator without mullion I transom. -

VII 10.0 STEEL WORK

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

VIII 11.0 FLOORING WORK

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat

cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc.

36 11.20.2 complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade sqm 6.75 1,328.35 8,966.36

pigment using 50% white cement 50% Grey cement

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to 15:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of

37 11.41A required thickness, leveling system and rubber mallet for placing the tiles gently and easily. -

46.2 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to LS. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:

3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with

white cement & matching pigments etc complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints

40 11.41A.1.1 with white cement and matching pigments etc. The tiles must be cut with the zero chipping SQM 49.83 1,534.85 76,483.88

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of

Tile 600 x 600 mm

IX 12.0 ROOFING WORK

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement :

39 12.21 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,

including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting

upto 150 mm height along the parapet walls in the same manner.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1

40 12.22 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a each 5.00 298.25 1,491.25

coat of neat cement, rounding the edges and making and finishing the outlet complete.

X 13.0 FINISHING WORK

41 13.4 12 mm cement plaster of mix : -

42 13.5 15 mm cement plaster on rough side of single or half brick wall of mix: -

43 13.16 6 mm cement plaster of mix : -

44 13.45 Finishing walls with textured exterior paint of required shade : -

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of

exterior primer applied @ 2.20kg/10 sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

45 13.80 and manufacturer, over the plastered wall surface to prepare the surface even and smooth sqm 447.05 156.05 69,762.15

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50

46 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve -

even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement

primer having VOC content less than 50 gram/litre

XI 21.0 ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

47 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing

/ panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

47.1 21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,

59.1.1 21.1.1.1 Minimum anodic coating of grade AC 15) kg 48.76 495.05 24,138.64

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

48 21.1.2 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,

48.1 21.1.2.1 Minimum anodic coating of grade AC 15) kg 238.42 598.60 1,42,718.21

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/

Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU sealant over

backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge

complete, complying to ASTM C920, DIN 18540-F & ISO 11600

49.1 21.19.1 Upto 5 mm depth and 5 mm width metre 79.01 148.10 11,701.38

XII 22.0 WATER PROOFING WORK

Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC

slab including adjoining walls upto 300 mm height including cleaning the surface before

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50%

of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement

mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and

50 22.7 approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto -

300 mm height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse

sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-

in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally

finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm

square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curing and for final test.“All above operations to be done in order and as directed and specified

by the Engineer-in-Charge :

50.1 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 263.00 1,684.60 4,43,049.80

TOTAL Civil works 87,09,782.76

1 SANITARY WARE & FITTINGS

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick hard

1 17.31 board ground fixed to wooden cleats with C.P. brass screws and washers complete. sqm 5.00 1,607.95 8,039.75

DSR- Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

17.22A direction of Engineer-in-charge.

Providing and fixing toilet paper holder :

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan)

with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

4 17.2 controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, -

including cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 6,515.55 -

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous china cistern

5 17.78 with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including Each 5.00 14,999.15 74,995.75

seat cover, and cistern fittings, nuts, bolts and gasket etc

6 ,18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : -

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

8 17.7 brass waste of standard pattern, including painting of fittings and brackets, cutting and making -

good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps]

9 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : Each -

18.21.2 45 cm length -

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved

by Engineer in charge.

a 15 mm nominal dia Each 4.00 6,940.75 27,763.00

Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.

13 17.16.A triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge Each 5.00 299.40 1,497.00

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with

15 17.72 minimum distances of 37 mm from wall face with concealed fittings arrangement of approved Each 5.00 204.70 1,023.50

quality and colour,weighing not less than 88 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of

75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.

17 ,17.10 brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and -

making good the walls wherever required :

17.10.1.3 Kitchen sink with drain board 510x1040 mm bowl depth 200 mm Each 1.00 7,159.00 7,159.00

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass

screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout complete.

Including cutting and making good the walls wherever required .

Supply, installation, testing and commissioning of horizontal type storage hot water heater within-

19 NS-3 built pressure relief valve, rated for inlet water pressure upto 6 bar complet in all respects -

including inlet, oulet connections, fixing bolts etc. and testing complete.

B Soil, Waste, Vent & Rain Water Pipes -

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

20 12.22 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a Each 4.00 298.25 1,193.00

coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams.

22 17.35 Providing and fixing soil, waste, vent and rain water pipes -

17.35.1.3 Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905 metre 70.00 1,169.30 81,851.00

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded

in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm

thick, bolts and nuts complete.

17.38.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 5.00 567.20 2,836.00

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

25 17.39 Providing and fixing plain bend of required degree. -

17.39.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 11.00 368.00 4,048.00

26 17.42 Providing and fixing double equal plain junction of required degree. -

17.42.1.3 Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905 Each 5.00 760.70 3,803.50

27 17.44 Providing and fixing single equal plain junction of required degree : -

17.44.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 5.00 581.45 2,907.25

28 17.48 Providing and fixing single unequal plain junction of required degree -

17.48.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 5.00 551.55 2,757.75

Providing and fixing Hubless cast iron offsets epoxy coated inside & outside as per IS : 15905

17.54A.1 130 mm offsets -

30 17.56 Providing and fixing terminal guard: -

17.56.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 4.00 427.80 1,711.20

31 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe -

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 210.00 432.05 90,730.50

Painting with synthetic enamel paint of approved drand and manufacture to give an even shade

13.61.1 Two more coast on new work sqm 70.00 155.90 10,913.00

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and down gauge). Cum 3.00 7,878.50 23,635.50

Providing and fixing trap of self cleansing design with screwed down or hinged with or without

34 ,17.60 vent arm complete, including cost of cutting and making good the walls and floors. -

a 17.60.1 100 mm inlet and 100 mm outlet -

17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 6.00 854.55 5,127.30

b 17.60.2 100 mm inlet and 75 mm outlet -

17.60.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 4.00 591.40 2,365.60

35 NS-4 Providing and fixing SS Floor Pop-Up Grating of approved quality and colour. -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Circular type 125 mm nominal dia [Make :Euronics, Model: EFG01P-55]. Each 10.00 870.80 8,708.00

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

36 pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of -

synthetic enamel paint of required shade complete as required :

For WB, Urinal FT & FD and Sink Drain pipe -

18.8.3 40 mm dia nominal bore Metre 16.00 831.00 13,296.00

18.8.4 50 mm dia nominal bore Metre 8.00 927.00 7,416.00

Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS:13592

37 12.41 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for thermal -

expansion. (i)Single socketed pipes.

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised -

38 12.42 Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring -

conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.

12.42.1.2 Coupler -110 mm diameter Each 4.00 136.15 544.60

12.42.5.2 Bend -87.5 deg -110 mm diameter Each 4.00 150.35 601.40

External Drainage System -

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil,

41 DSR-2.10 and then returning the soil as required, in layers not exceeding 20 cm in depth, including -

consolidating each deposited layer by ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m :

a 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 65.00 352.15 22,889.75

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,

42 DSR-2.11 but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). -

a a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 16.25 447.23 7,267.50

Fixing SW Gully Trap Grade A Complete CI Grating, brick masonry chamber and water tight CI

43 ,19.4 cover frame of 300 x 300 mm size (inside) square mouth traps or "P" or "S" Type Traps. -

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement complete as per standard design :

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

(A) Inside size 90×80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23

kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (medium duty) 500 mm internal diameter, total

weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame

19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 26,405.50 26,405.50

45 18.8.1.1 Extra over item No. 25.4 for every additional depth of 0.10 m. or part there of manhole. -

a 19.8 Extra for depth for manholes -

19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 metre 1.00 8,825.40 8,825.40

19.8.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 metre 1.00 10,585.50 10,585.50

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :

10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23

mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail length on 138 mm as per standard

drawing and suitable to with stand the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification mark to be visible even after

fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff

DSR-19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of -

joints etc. complete :

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

47 DSR-19.3 aggregate 40 mm nominal size) up to haunches of RCC. pipes including bed concrete as per -

standard design :

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1

48 DSR-19.27 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame -

complete as per standard design

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3

(1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete for pipes 100 to 250mm dia.

C Internal Water Supply -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

62 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent -

cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall -

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 15.00 401.55 6,023.25

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 35.00 518.75 18,156.25

b 18.7.5 40 mm nominal outer dia .Pipes. Metre 30.00 702.95 21,088.50

18.7.6 50 mm nominal outer dia .Pipes. Metre 10.00 934.15 9,341.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

63 ,18.8 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent -

cement and the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc. -

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 105.00 537.60 56,448.00

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 22.00 627.25 13,799.50

Providing and fixing G.I. pipes with two coats of anti-corrosive bitumastic paint of approved quality

64 ,18.10 : complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. -

Internal work - Exposed on Wall -

18.10.1 & 15 mm dia nominal bore

18.10.2 & 20 mm dia nominal bore

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

65 pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of -

synthetic enamel paint of required shade complete as required :

DSR Fire- 25 mm dia nominal bore

DSR Fire- 32 mm dia nominal bore

DSR Fire- 40 mm dia nominal bore

DSR Fire- 50 mm dia nominal bore

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged

cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement

: 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement

complete as per standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.00 1,992.60 1,992.60

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for tank.

Making core cutting machine up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.

and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as

to make it leak proof.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.2 32 mm nominal bore Each 1.00 689.60 689.60

18.17.3 40 mm nominal bore Each 1.00 826.10 826.10

70 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : -

18.19.6.2 80 mm nominal bore Each 3,855.40 -

Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball

71 NS-5 inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads -

complete in all respects.

a 15 mm nominal bore Each 3.00 463.55 1,390.65

b 20 mm nominal bore Each 6.00 463.55 2,781.30

Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

a 18.18.3 25 mm nominal bore Each 1.00 464.05 464.05

TOTAL Plumbing works 11,00,749.25

I SUB HEAD (I) :- INTERNAL WIRING

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

1 Point wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as required.

2 Group/Loop Control Point wiring in PVC conduit, with modular type switch :-

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core

1.55 cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

3 Twin Control Point wiring in PVC conduit, with modular type switch :- -

Wiring for twin control light point with 1.5 Sq.mm FRLS PVC insulated copper conductor single

core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular

plate,suitable GI box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

4 Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- -

Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated, copper conductor single

core cable in surface / recessed medium class PVC conduit along with 1 no. 4 Sq.mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

5 Circuit / Sub main wiring in PVC conduit :- -

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.14 insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit -

Supply and fixing of following sizes of medium class PVC conduit along with accessories in

6 1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit -

Supplying and fixing of METAL BOX following sizes (nominal size) on surface or in recesss with

7 1.22 suitable size of phenolic laminated sheet cover in front including painting etc as required. -

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in

8 1.31 recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. Each 46.00 477.00 21,942.00

modular switch, connection etc. as required.

9 S/F power plug point modular type accessories :- -

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in

1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 Each 13.00 586.00 7,618.00

amps. modular switch, connection etc. as required.

10 S/F modular type electronic fan regulator :- -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply and fixing two module stepped type electronic fan regulator on the existing modular plate

1.25 switch box including connections but excluding modular plate etc. as required. Each 1.00 369.00 369.00

11 S/F modular type blanking plate :- -

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including

connections etc. as required.

13 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required. Each 4.00 131.00 524.00

TOTAL SUB HEAD (I) (DSR'2022) -

II SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's -

Supplying and fixing 20 A, 240 volts, SPN industrial type socket outlet, with 2 pole and earth,

metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for the socket out let and complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C" curve, miniature circuit

2 2.1 breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete -

with connections, testing and commissioning etc. as required.

Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

TOTAL SUB HEAD (II) (DSR'2022) -

III SUB HEAD (III) :- EARTHING -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe etc.

with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing along with

existing surface / recessed conduit / submain wiring / cable as required.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

TOTAL SUB HEAD (III) (DSR'2022) -

IV SUB HEAD (IV) :- INTERNAL LIGHTING FIXTURES & FANS -

LIGHTING FIXTURES & FANS -

Supply, installation, testing and commissioning of wall / ceiling / LED light luminaires with all

1 MR accessories as per standard item etc complete as required as per the standard catalogue item. -

Supply, installation, testing and commissioning of 2ft 10W LED Batten delivering an initial

system lumen of 1000 lumens & the luminaire shall be with system efficacy ≥ 100 lm/W. The

housing should be made of Extruded Aluminium with polycarbonate diffuser. The operating CCT

shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with

input voltage range of 150 to 270V , PF ≥ 0.9 ,THD ≤ 10%, 50,000 Hrs LED Life with L70 Criteria

and Ingress Protection of IP20. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along

with Photo Biological Safety Standard.

Wipro Cat. Ref. LL20-111-XX65AL5IB (Trim Neo LL20 Series)

Supply, installation, testing and commissioning of 4ft 20W LED Batten delivering an initial

system lumen of 2000 lumens & the luminaire shall be with system efficacy ≥ 100 lm/W. The

housing should be made of Extruded Aluminium with polycarbonate diffuser. The operating CCT

shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with

input voltage range of 150 to 270V , PF ≥ 0.95 ,THD ≤ 10%, 50,000 Hrs LED Life with L70 Criteria

and Ingress Protection of IP20. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along

with Photo Biological Safety Standard.

Wipro Cat. Ref. LL20-281-XX57AL5IB

Supply, installation, testing and commissioning of 24W Surface Mounted Round Led

Downlighter delivering minimum system lumen of 2400 lm & the luminaire shall be with system

efficacy ≥ 100 lm / W. Housing is Pressure Die Cast Aluminium, powder coated white with Optics:

HET Diffuser. Ingress Protection should be IP20. The operating CCT shall be 5700K with CRI of

≥80. The luminaire shall be BIS Registered with isolated type electronic driver in polycarbonate /

metal enclosure with input voltage range of 100 to 265V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs

LED Life with L70 Criteria. The LED Driver shall be of same make and made in India for ease of

repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection

of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED

manufacturer along with Photo Biological Safety Standard.

Wipro Cat. Ref. LD06-301XXX-57SMBT

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, installation, testing and commissioning of 18W Surface Mounted Round Led

Downlighter delivering minimum system lumen of 1800 lm & the luminaire shall be with system

efficacy ≥ 100 lm / W. Housing is Pressure Die Cast Aluminium, powder coated white. IP20 ,

Optics: HET Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be

BIS Registered with isolated type electronic driver in polycarbonate / metal enclosure with input

d MR voltage range of 100 to 265V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria. Nos. 7.00 2,844.00 19,908.00

The LED Driver shall be of same make and made in India for ease of repair and service. The LED

shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall

be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo

Biological Safety Standard. Wipro Cat. Ref. LD06-221XXX-57SMBT

Supply, installation, testing and commissioning of 10W Bulkhead delivering minimum system

lumen of 1000 lm & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing & Rim is

Pressure Die Cast Aluminium. The Luminaire shouuld have ingress protection of IP65 and IK

rating of IK08 along with Opal Polycarbonate Diffuser. The operating CCT shall be 5700K with

CRI of ≥80. The luminaire shall be BIS Registered and should have input voltage range of 140 to

280V along with THD ≤ 10% & PF ≥ 0.95. The Luminaire shouuld have a life class of 50,000 Hrs

LED Life with L70 Criteria. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along

with Photo Biological Safety Standard. Wipro Cat. Ref. LW07-141-XXX-57-G1

Supply, installation, testing and commissioning of 9-12W wall breaket light with seprate LED

bulb delivering minimum system lumen of 1000 lm & the luminaire shall be with system efficacy ≥

100 lm / W. The luminaire shall be BIS Registered and should have input voltage range of 140 to

280V along with THD ≤ 10% & PF ≥ 0.95. The Luminaire shouuld have a life class of 50,000 Hrs

LED Life with L70 Criteria. Luminaire shall have minimum surge protection of 2.5KV.

Supply, installation, testing and commissioning of 2 x 9-12W Twin wall breaket light with

seprate LED bulb delivering minimum system lumen of 1000 lm & the luminaire shall be with

system efficacy ≥ 100 lm / W. The luminaire shall be BIS Registered and should have input

voltage range of 140 to 280V along with THD ≤ 10% & PF ≥ 0.95. The Luminaire shouuld have a

life class of 50,000 Hrs LED Life with L70 Criteria. Luminaire shall have minimum surge

protection of 2.5KV.

SUPPLY OF CEILING & EXHAUST FANS -

Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts, mounting frame,

shutter, lovers and other accessories etc. complete

300 mm sweep (Heavey Duty) Nos 5.00 1,727.00 8,635.00

TOTAL SUB HEAD (IV) (NON-DSR) -

V ERECTION OF FANS -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan

with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long

down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than

0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance

3 19.1 as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control Each 11.00 2,730.00 30,030.00

and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75

degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single

phase AC Supply, earthing etc. complete as required.

Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required

TOTAL SUB HEAD (V) (DSR'2022) -

VI SUB HEAD (VI) :- PANEL AND DISTRIBUTION BOARD -

(NON-DSR'2018) -

Supply, Installation, Testing & Commissioning of METER PANEL, cubicle type, made out of min

2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor/Wall mounting,

dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3

phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires,

rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket, IS

8623 etc. The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification.

100A FP 25kA MCCB with thermal magnetic release with adjustable OL, SC and EF protection

with 3 Phase meter- 1 nos.

1 Set of 160 A TPN busbars of high conductivity electrolytic quality Aluminium alloy and suitable

size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos. -

RYB indication lamp, LED type - 3 nos. -

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1. -

100/5A 5VA class 1 resin cast CT - 1 set -

63 A FP 10 kA MCB - 2 nos. -

TOTAL SUB HEAD (VI) NON D.S.R. ITEMS -

VII SUB HEAD (VII) :- EXTERNAL LIGHTING -

(NON-DSR'2018) -

Suppling, installation, Testing & Co mmissioning of IP 66 20-25 LED Light for Foothpath Lighting

of 3 meter pole as required.

Supplying, installation, testing & commissioning of suitable size Feeder Pillar for Foothpath

Lighting i/c necessary earthing complete etc as required.

TOTAL SUB HEAD (VI) NON D.S.R. ITEMS

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

TOTAL Electrical works 11,21,241.00

MASTER BED ROOM DOUBLE BED

SIZE: 2188LX325DX1050HT

This is a contemporary upholstered bed designed for both style and comfort, ideal for modern

bedrooms. The frame is constructed from high-quality engineered wood with hardwood

reinforcements, ensuring durability and structural integrity. The bed features a dual-tone

headboard—upholstered in dark textured fabric with a high backrest for enhanced comfort and

support during lounging or reading. The outer winged portions of the headboard are upholstered

in a contrasting lighter fabric or faux leather, adding a sophisticated visual depth.

The base of the bed is similarly upholstered in matching beige-toned material, neatly tailored to

give a soft, cushioned look while maintaining a clean, angular profile. The bed rests on slim,

1 1 tapered black metal legs that provide a floating appearance and allow for easy floor cleaning and NOS 1.00 1,13,280.00 1,13,280.00

airflow beneath the structure. The mattress platform is a flat wooden ply base designed to support

a standard queen or king-size mattress without the need for a box spring.

With a design that blends contemporary aesthetics and cozy functionality, this bed is well-suited

for residential master bedrooms, boutique hotels, or high-end guest suites. The use of neutral yet

contrasting colors makes it versatile for various interior styles, from industrial chic to modern

SIDE TABLE FOR MASTER BEDROOM

SIZE: 500DIAX600HT

Model LX-308 MGL12UX500 is a contemporary side table with a compact and refined design,

ideal for modern interiors including lounge areas, bedrooms, and reception zones. The tabletop

has a diameter of 500 mm and is crafted from premium-quality marble, showcasing natural

veining and a smooth, polished surface that offers both durability and visual sophistication. The

table stands at a height of 600 mm, making it suitable as a side or accent table beside sofas,

2 2 armchairs, or beds. NOS 2.00 11,800.00 23,600.00

The understructure features a uniquely designed powder-coated mild steel base with a

combination of round tubular and flat metal sections. The base consists of a circular flat steel

plate for stability, paired with two vertical supports—one tubular and the other laser-cut flat

bar—engineered for both structural integrity and an artistic appearance. The powder coating

enhances corrosion resistance and provides a uniform matte finish that complements the marble

top. Compact in size yet bold in style, this table is the perfect blend of elegance and modern

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

TV UNIT FOR MASTER BEDROOM FOR MASTER BED ROOM / BED ROOM-1

This wall-mounted TV unit is crafted from high-quality engineered wood and features a warm teak

finish, offering both durability and aesthetic appeal. Designed for modern living spaces, the unit

provides a sleek and functional storage solution while maintaining a minimalistic look.

With overall dimensions measuring 54 inches in length, 13 inches in width, and 43 inches in

height (equivalent to 137.2 cm x 33 cm x 109.2 cm), it is suitably sized to accommodate a wide

range of television sets along with other media essentials. The unit comes equipped with a

3 3 combination of storage options including one drawer and two closed-door compartments, making NOS 2.00 25,016.00 50,032.00

it ideal for organizing remotes, set-top boxes, and other accessories out of sight.

This unit is specifically designed for wall mounting, helping to save floor space and giving a clean,

floating appearance to your media setup. Its closed storage design ensures a clutter-free look

while keeping your items dust-free.

STUDY TABLE FOR MASTER BED ROOM / BED ROOM-1

SIZE: 1200LX600DX750HT

The table is designed with a 25mm thick pre-laminated particle board top, offering a durable and

smooth work surface suitable for office and commercial use. All exposed edges are finished with

2mm thick PVC edge lipping to enhance impact resistance and ensure a clean, refined

appearance. The tabletop is available with either a straight or reverse waterfall edge profile,

4 4 adding a sleek design detail while maintaining functionality. The table is supported by end legs NOS 2.00 16,992.00 33,984.00

that are either powder-coated aluminum die-cast Enrich legs, providing a modern, metallic

aesthetic, or optional solid wooden legs for a more natural, warm finish. A modesty panel, made

from 18mm thick pre-laminated board with matching 2mm PVC edge lipping, is integrated

beneath the tabletop at a height of 450mm, offering structural stability and added privacy. This

design strikes a balance between durability, elegance, and ergonomic functionality—ideal for

workstations, executive desks, or collaborative office setups.

CHAIR FOR STUDY TABLE MASTER BED ROOM / BED ROOM-1

MODEL: BOSCO SOLID WOOD WITH CUSHION SEAT

This is a stylish, mid-century modern wooden armchair, characterized by its smooth curves,

minimalist design, and ergonomic construction. The frame is made from solid

hardwood—typically teak, walnut, or ash wood—polished to a rich, dark brown finish that

highlights the natural grain and ensures long-lasting durability. The chair features a curved,

wraparound backrest and integrated armrests, crafted from a single piece or seamlessly joined

elements for both aesthetic appeal and enhanced structural integrity. The backrest is

ergonomically contoured to support the spine and shoulders comfortably. The seat is fitted with a

cushioned pad upholstered in a soft, high-density foam and finished with a mustard-yellow fabric

or leatherette for a vibrant contrast against the wooden frame. The legs are tapered and

outwardly angled to ensure stability and lend a graceful profile. This chair stands at an

approximate height of 750–800 mm, with a seat height of around 450 mm, making it ideal for use

in dining areas, meeting rooms, cafés, or accent settings. The combination of organic materials

and refined craftsmanship makes it a timeless addition to both classic and modern interiors.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

2 SEATER SOFA FOR MASTER BED ROOM

Two-seater Sofa (Wooden Legs)

The overall size of the sofa shall be 1200L x 665D x 780H. Sofa under-structure shall be made

from solid wood ie. properly treated & seasoned Kiln dried Beach wood, finished with clear

synthetic PU coating for best resilience and high durability. The Legs & beam Beams shall be

joined together by the method of tenon & mortise. The cross section of each leg at bottom or on

floor shall be 30 x 30mm and at the top side it should be 50x30mm. Each leg shall be fixed with a

M6 insert plastic injection moulded leveller of 8-10mm height. The cross beams of the wooden

6 6 frame shall be 50-60mm x 22mm thick keeping wider face visible from front & thinner side shall NOS 2.00 34,257.76 68,515.52

come below the sofa cushion. The inner structure of sofa shall be made from the combination of

treated pine wood of 20-25mm thick & neem-based plywood sheets. The polyurethane (PU)

foams of 32 & 40 densities shall be used in Seat construction and 32 density foams shall be used

in back rest construction. The height of back rest shall be 780mm. Seat height shall be approx.

17 inches (430mm) to 18 inches (450mm) and seat depth shall be 20-22 inches (500 - 550mm).

Arms shall have tapered angle as of back rest. The height of arm rest shall be 670m from floor.

The manufacturer shall have quality & safety related prevalent certifications of BIFMA Level-2,

and IGBC Gold rated manufacturing facility.

MARBLE TOP CENTER TABLE FOR MASTER BEDROOM

SIZE: 800DIAX500HT

This is a contemporary designer coffee table featuring a luxurious round tabletop crafted from

high-grade polished marble with prominent grey veining on a white base, offering a sophisticated

and timeless aesthetic. The marble top, approximately 20 mm thick, provides a solid and refined

surface with natural patterns that vary from piece to piece, making each table unique. The base is

an artistic and sculptural form made from powder-coated black metal or a matte-finish engineered

7 7 material. It consists of two curved, intersecting supports that form a stable yet visually striking NOS 1.00 22,656.00 22,656.00

foundation. This bold, fluid structure not only ensures excellent stability but also adds a dynamic,

modern character to the overall design. The table stands at an approximate height of 400-500

mm, with a diameter ranging from 750–800 mm, ideal for placement in living rooms, lounge

spaces, or premium reception areas. The combination of natural marble and bold black curves

creates a powerful design statement, blending functionality with visual impact.

MARBLE TOP CORNER TABLE FOR MASTER BEDROOM

SIZE: 400DIAX600HT

The table features a round tabletop made from high-quality polished marble, showcasing natural

grey and white veining that adds an elegant and luxurious appeal. The top is approximately 18–20

mm thick, ensuring both strength and aesthetic sophistication. The base is a solid, tapered

conical structure made of black-finished metal or high-density engineered material, providing a

8 8 bold contrast to the light-toned marble surface. The conical base design ensures stability while NOS 1.00 12,744.00 12,744.00

maintaining a minimal footprint, making it ideal for modern interiors. The table stands at an

estimated height of 550–600 mm, with a top diameter of around 350–400 mm, making it suitable

for use as a side table in living rooms, lounges, or reception areas. The combination of marble

and matte black finish not only enhances durability but also complements contemporary and

luxury design themes.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

TABLE FOR DINING AREA

SIZE: 1800LX900DX750HT

The table features a robust understructure made from solid Beech wood, selected for its strength,

durability, and natural grain character. The wood is finished with a clear polyurethane (PU)

coating that enhances its visual appeal while providing resistance against moisture, stains, and

wear. The legs are equipped with height-adjustable levellers, allowing for compensation of floor

undulations up to 10mm, ensuring stable and level placement on uneven surfaces. The tabletop,

specifically designed for cafeteria use, is constructed from 18mm thick pre-laminated HydroShield

board, offering superior protection against moisture ingress, spills, and routine wear. This makes

the table ideal for high-traffic environments such as cafeterias, dining areas, and informal meeting

spaces, combining functionality, durability, and aesthetic simplicity.

LEAF Wooden 4 legss polyproylene seat and back

This chair features a sleek, minimalist design, combining modern materials with natural finishes

for a contemporary yet timeless appeal. The seat and backrest are crafted from molded

polypropylene or reinforced plastic, finished in a clean matte white tone. The ergonomically

contoured shell offers supportive seating with a gently curved backrest and waterfall edge,

promoting comfort during extended use.

The base structure is constructed from solid hardwood, likely oak or ash, treated with a natural

10 10 finish to preserve the grain and warmth of the wood. The four legs are slightly splayed for NOS 8.00 7,191.39 57,531.14

enhanced stability and aesthetic balance, with a robust joinery connection to the seat for added

strength and durability. Rubber foot caps may be included to protect flooring and ensure slip

Ideal for use in dining areas, cafés, home offices, or contemporary meeting spaces, this chair

blends functionality and style. Its lightweight form allows for easy movement and arrangement,

while the contrast between the crisp white seat and the warm wooden legs adds visual interest in

3 SEATER SOFA FOR DINING / BED ROOM-1 / DRAWING CUM LIVING ROOM

Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood

and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is

11 11 upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- NOS 7.00 50,177.38 3,51,241.63

2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine

wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional

cushioning purpose. Legs should be made up of stainless steel tubes/pipes.

2 SEATER SOFA FOR DRAWING CUM LIVING ROOM

Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood

and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is

12 12 upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- NOS 1.00 36,011.71 36,011.71

2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine

wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional

cushioning purpose. Legs should be made up of stainless steel tubes/pipes.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

1 SEATER SOFA FOR DRAWING CUM LIVING ROOM

Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood

and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is

13 13 upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- NOS 1.00 22,442.66 22,442.66

2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine

wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional

cushioning purpose. Legs should be made up of stainless steel tubes/pipes.

CENTER TABLE FOR DINING

SIZE: 1050X525X450HT

The overall size of the Centre table shall be 1050 mm LengthX525mm depth, 450 mm height. the

table top shall be made up of 18mm thick prelaminated particle board of approved shade All the

edges of discussion surface shall be provided with machine pressed 2mm thick imported PVC

lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall

be supported on CRCA legs duly powder coated. The Chair understructure should be provided

with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of

the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design &

thicker on the top & thinner on the bottom side. The manufacturer shall have quality & safety

related prevalent certifications of BIFMA Level-2, and IGBC Gold rated manufacturing facility.

CORNER TABLE FOR DINING / BED ROOM-1

SIZE: 600X450X450HT

The overall size of the table shall be 600 mm Length x 450 mm depth, 450 mm height. the table

top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges

of discussion surface shall be provided with machine pressed 2mm thick imported PVC lipping

glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be

supported on CRCA legs duly powder coated. The Chair understructure should be provided with

32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the

table top shall be rounded & edges shall not be sharp. The legs shall be in angular design &

thicker on the top & thinner on the bottom side. The manufacturer shall have quality & safety

related prevalent certifications of BIFMA Level-2, and IGBC Gold rated manufacturing facility.

MARBLE TOP CENTER TABLE FOR DRAWING CUM LIVING ROOM

SIZE 750DIAX500HT

Model LX-308 MGL12UX500 is a premium center table designed for modern living and lounge

spaces. The table features a round top measuring 750 mm in diameter, crafted from high-quality

marble with elegant natural veining, offering both luxury and durability. The marble top has a

polished finish that enhances its visual appeal and ensures ease of cleaning and maintenance. It

is supported by a distinctively sculpted metal base made from precision-engineered powder-

coated mild steel, designed in a three-leg geometric configuration that adds visual interest and

structural stability. The metal legs are tapered and inclined, converging centrally to form a robust

support system, while also allowing open space below for better legroom and a lighter aesthetic.

The table stands at a height of 500 mm, making it ideal as a coffee table or centerpiece for

seating arrangements in residential or commercial interiors. Its combination of stone and metal

materials reflects a contemporary yet timeless style, blending functionality with refined design.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

MARBLE TOP CORNER TABLE FOR DRAWING CUM LIVING ROOM

SIZE: 500DIAX600HT

Model LX-308 MGL12UX500 is a contemporary side table with a compact and refined design,

ideal for modern interiors including lounge areas, bedrooms, and reception zones. The tabletop

has a diameter of 500 mm and is crafted from premium-quality marble, showcasing natural

veining and a smooth, polished surface that offers both durability and visual sophistication. The

table stands at a height of 600 mm, making it suitable as a side or accent table beside sofas,

armchairs, or beds.

The understructure features a uniquely designed powder-coated mild steel base with a

combination of round tubular and flat metal sections. The base consists of a circular flat steel

plate for stability, paired with two vertical supports—one tubular and the other laser-cut flat

bar—engineered for both structural integrity and an artistic appearance. The powder coating

enhances corrosion resistance and provides a uniform matte finish that complements the marble

top. Compact in size yet bold in style, this table is the perfect blend of elegance and modern

DOUBLE BED FOR BED ROOM-1

SIZE: 2000LX1600DX425-750H

The head rest, foot rest & bed side panels are from 25mm thk, E1 grade, particle board

prelaminated on two sides, with rounded corners.

The storage - drawer units and center panels are of 18mm thk prelam particle board.

Height of head rest panel is 750mm and of foot rest is 450mm.

The inner structure of the cot has a metal tubular frame work, Tubes are confirming to IS

4923:1997, it is in-addition to center panels of prelaminated particle board. Cot comes with two

18 18 movable storage units, each of size 980mm L x 750mm D x 275mm H, fixed with castor wheels NOS 1.00 43,154.02 43,154.02

for easy accessability and mobility. The storage units designed to accomodate on either side (left

side or right side) of the cot depending upon the clients requirement. The storage facia comes

with flush handle as a standard offering. The foot rest & head rest panels comes with adjustable

levellers. Mattress base or platform is of 18mm thk prelam particle board in white laminate

finish.The design offers a knockdown Construction, easy to assemble, strong and robust product.

All metal parts comes with powder coating finish of 60-80 microns thick. All hardware are of steel,

comes with zinc blue / yellow / black passivation.

SIDE STORAGE FOR BED

SIZE: 450L X 450D X510H

The bedside storage unit is thoughtfully designed with a functional configuration that includes a

single drawer at the top and an open shelf below, offering convenient storage for personal items

and bedside essentials. The body of the unit is constructed using 18mm thick pre-laminated

particle board, ensuring strength, durability, and resistance to everyday wear. All exposed edges

are finished with 2mm thick PVC edge banding, providing a clean look and protecting the

surfaces from chipping and moisture ingress. The drawer is fitted with full panel drawer slides for

smooth and reliable operation and features a minimalist finger groove handle for ease of use. A

cam lock mechanism is integrated for secure storage. The unit is finished in a shade as per the

approved sample, complementing various interior themes with a sleek and modern appearance.

This bedside storage piece combines practicality with streamlined design, making it ideal for both

residential and hospitality environments.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

TABLE FOR OFFICE

MAIN TABLE: W 2100 x D 900 x H 750mm

SIDE STORAGE: 1050 x D450 x H 750mm

BACK STORAGE: 2700LX450DX1200HT

Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed

edges(Straight/Reverse waterfall edge)

End Legs : Powder coated Al die casted Enrich legs/Wooden Legs.

Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht.

Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on

PVC cable dump and Vertical wire entry cover or vertebra for wire uptake from floor to cable

Side Storsge: Made up of 18mm thick Prelam

particle board with Number lock.

Back Storage: Back Storage with Number lock Made up of 18mm thick Prelam

particle board.

CHAIR FOR OFFICE

The FP Invention High Back Chair is an ergonomically designed executive seating solution that

combines comfort, functionality, and modern aesthetics. It features a high backrest upholstered in

premium leatherette, offering a sleek appearance along with long-lasting durability. The seat and

back are both cushioned and contoured to support prolonged sitting. The chair is equipped with a

multilock mechanism that allows the user to lock the backrest at multiple recline angles,

21 21 promoting flexibility and customized posture. It also includes two-way adjustable NOS 1.00 16,887.22 16,887.22

armrests—allowing both height adjustment and swivel movement—ensuring optimal arm support

based on individual preferences. The base is crafted from high-quality chrome-plated metal,

providing sturdy support, corrosion resistance, and a contemporary finish. Designed for executive

cabins, workstations, and conference settings, this chair blends sophisticated design with

ergonomic comfort.

VISITOR CHAIR FOR OFFICE

The FP Invention Visitors Chair is a sleek and professional seating option designed to offer both

style and comfort in reception areas, meeting rooms, and visitor lounges. The chair features a

sturdy chrome-plated sledge base that not only enhances the visual appeal but also ensures long-

lasting stability and resistance to corrosion. The seat and backrest are upholstered in high-quality

22 22 leatherette, providing a refined appearance along with easy maintenance and comfort during NOS 3.00 13,320.78 39,962.35

extended sitting periods. The chair is equipped with fixed arms, designed to offer consistent arm

support while maintaining a clean and minimalist profile. With its modern design and robust

construction, the FP Invention Visitors Chair is an ideal solution for enhancing guest seating in

any professional environment.

TOTAL Furniture works 11,96,620.06

Gross Total Amount (Director's Residence) 1,21,28,393.00

Gross Total Amount (Director's Residence) 1,21,28,393.00

2.) BOQ for Provision of washroom at NIT Gate towards KUK side of National Institute of Technology Kurukshetra, Haryana

I 2.0 EARTH WORK

CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking

of Earth up to 5 km

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

3 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and cum 45.50 196.00 8,918.00

watering, lead up to 50 m and lift up to 1.5 m.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15

cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

II 4.0 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2

6 4.11 coarse sand (zone-Ill) derived from natural sources: 4 graded stone aggregate 20 mm nominal sqm 8.75 495.75 4,337.81

size derived from natural sources).

Extra for providing and mixing water proofing material in cement concrete work in doses by

weight of cement as per manufacturer's specification.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality

8 4.13 using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and sqm 8.75 146.15 1,278.81

finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-

III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from

9 4.17 natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and sqm 39.03 749.30 29,245.18

consolidated and grouted with fine sand, including necessary excavation, levelling & dressing &

finishing the top smooth.

III 5.0 REINFORCED CEMENT CONCRETE

10 5.9 Centering and shuttering including strutting, propping etc. and removal of form for -

10.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 13.20 392.15 5,176.38

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

10.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 46.05 927.25 42,699.86

10.4 5.9.4 Shelves (Cast in situ) sqm 927.25 -

10.5 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 69.67 736.40 51,304.84

10.6 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 43.73 961.30 42,032.84

10.7 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 764.95 -

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks and the like

10.9 5.9.16 Edges of slabs and breaks in floors and walls -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

13.10 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 7.60 951.10 7,230.26

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

11.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 450.99 107.85 48,639.27

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete above plinth level.

12.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 777.74 107.85 83,879.26

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

14 5.33 reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. -

Note: Extra cement up to 10% of the minimum specified cement content in design mix

shall be payable separately. In case the cement content in design mix is more than 110%

of the specified minimum cement content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

14.1 5.33.1 All works upto plinth level -

a 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 7.66 9,504.75 72,806.39

14.2 5.33.2 All works above plinth level upto floor V level -

a 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 13.21 9,860.40 1,30,255.88

IV 6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

15.1 6.1.2 Cement mortar 1:6 (1 cement :6 coarse sand) cum 0.53 7,132.25 3,780.09

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in:

16.1 6.4.2 Cement mortar 1:6 (1 cement :6 coarse sand) cum 43.25 9,105.95 3,93,814.13

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor Vlevel.

17.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 20.30 1,123.80 22,813.14

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half

VI 9.0 WOOD AND P. V. C. WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

19.1 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 13.02 2,392.65 31,152.30

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

of flush door shutters (over all area of door shutter to be measured).

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

21 9.96 than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts -

and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

22 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary -

screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade

23 9.100 AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with ecessary screws -

etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating

24 9.101 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, -

with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 3.00 72.35 217.05

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six

levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868)

aluminium lever handles of approved quality with necessary screws etc. complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/

suede finish with high density protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

27 9.147.C1 Fixed window I ventilator without mullion I transom. -

VII 10.0 STEEL WORK

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

VIII 11.0 FLOORING WORK

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat

cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc.

29 11.20.2 complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). sqm 6.75 1,328.35 8,966.36

Medium shade pigment using 50% white cement 50% Grey cement

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by

the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as

30 11.37 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 sqm 59.33 1,096.55 65,058.31

Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc., complete.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and

dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

IX 12.0 ROOFING WORK

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement :

32 12.21 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,

including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting

upto 150 mm height along the parapet walls in the same manner.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1

33 12.22 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a each 1.00 298.25 298.25

coat of neat cement, rounding the edges and making and finishing the outlet complete.

X 13.0 FINISHING WORK

34 13.4 12 mm cement plaster of mix : -

35 13.5 15 mm cement plaster on rough side of single or half brick wall of mix: -

36 13.16 6 mm cement plaster of mix : -

37 13.44 Finishing walls with water proofing cement paint of required shade : -

37.1 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 123.82 116.90 14,474.56

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

38 13.80 and manufacturer, over the plastered wall surface to prepare the surface even and smooth sqm 123.82 156.05 19,322.11

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50

39 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve -

even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement

primer having VOC content less than 50 gram/litre

XI 21.0 ALUMINIUM WORK

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

40 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing

/ panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

40.1 21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,

Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

41 21.1.2 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,

Minimum anodic coating of grade AC 15)

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/

Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU sealant over

42 21.19 backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge -

complete, complying to ASTM C920, DIN 18540-F & ISO 11600

42.1 21.19.1 Upto 5 mm depth and 5 mm width metre 52.10 148.10 7,716.01

XII 22.0 WATER PROOFING WORK

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC

slab including adjoining walls upto 300 mm height including cleaning the surface before

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50%

of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement

mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and

43 22.7 approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto -

300 mm height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse

sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-

in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally

finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm

square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curing and for final test.“All above operations to be done in order and as directed and specified

by the Engineer-in-Charge :

43.1 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 55.93 1,684.60 94,219.68

TOTAL Civil works 16,41,733.90

1 Internal Plumbing Works.

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick hard

1 17.31 board ground fixed to wooden cleats with C.P. brass screws and washers complete. sqm 2.00 1,607.95 3,215.90

PrProviding and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe -

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan)

with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

3 17.2 controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, -

including cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 3.00 6,515.55 19,546.65

4 ,18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

6 17.7 brass waste of standard pattern, including painting of fittings and brackets, cutting and making -

good the walls wherever require:

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar

7 18.2 Providing and fixing uplasticised PVC connection pipe with brass unions : Each -

45 cm length -

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.

9 17.16.A triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge Each 3.00 349.15 1,047.45

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of

75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with

white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders

11 17.5 with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet -

grating and other couplings in C.P. brass, including painting of fittings and cutting and making

good the walls and floors wherever required :

17.5.3 TWO half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 1.00 18,008.75 18,008.75

B Soil, Waste, Vent & Rain Water Pipes -

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

12 12.22 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a Each 1.00 298.25 298.25

coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams.

14 17.35 Providing and fixing soil, waste, vent and rain water pipes -

17.35.1.3 Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905 metre 10.00 1,169.30 11,693.00

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded

in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm

thick, bolts and nuts complete.

17.38.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 2.00 567.20 1,134.40

17 17.39 Providing and fixing plain bend of required degree. -

17.39.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 3.00 368.00 1,104.00

18 17.42 Providing and fixing double equal plain junction of required degree. -

17.42.1.3 Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905 Each 3.00 760.70 2,282.10

19 17.44 Providing and fixing single equal plain junction of required degree : -

17.44.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 2.00 581.45 1,162.90

20 17.48 Providing and fixing single unequal plain junction of required degree -

17.48.1.3 Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905 Each 1.00 551.55 551.55

Providing and fixing Hubless cast iron offsets epoxy coated inside & outside as per IS : 15905

17.54A.1 130 mm offsets -

22 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe -

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 15.00 432.05 6,480.75

Painting with synthetic enamel paint of approved drand and manufacture to give an even shade

13.61.1 Two more coast on new work sqm 10.00 155.90 1,559.00

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and down gauge). Cum 1.00 7,878.50 7,878.50

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing trap of self cleansing design with screwed down or hinged with or without

25 ,17.60 vent arm complete, including cost of cutting and making good the walls and floors. -

a 17.60.1 100 mm inlet and 100 mm outlet -

17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 3.00 854.55 2,563.65

b 17.60.2 100 mm inlet and 75 mm outlet -

17.60.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 1.00 591.40 591.40

17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.00 53.25 213.00

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

26 Fire DSR 18.8pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of -

synthetic enamel paint of required shade complete as required :

For WB, Urinal FT & FD and Sink Drain pipe -

18.8.3 40 mm dia nominal bore Metre 4.00 831.00 3,324.00

18.8.4 50 mm dia nominal bore Metre 2.00 927.00 1,854.00

Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS:13592

27 12.41 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for thermal -

expansion. (i)Single socketed pipes.

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised -

28 12.42 Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring -

conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.

12.42.1.2 Coupler -110 mm diameter Each 1.00 136.15 136.15

12.42.5.2 Bend -87.5 deg -110 mm diameter Each 1.00 150.35 150.35

External Drainage System -

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil,

29 DSR-2.10 and then returning the soil as required, in layers not exceeding 20 cm in depth, including -

consolidating each deposited layer by ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m :

a 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 2.00 352.15 704.30

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,

30 2.10.1.2 but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). -

a a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 0.50 447.23 223.62

Fixing SW Gully Trap Grade A Complete CI Grating, brick masonry chamber and water tight CI

31 ,19.4 cover frame of 300 x 300 mm size (inside) square mouth traps or "P" or "S" Type Traps. -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement complete as per standard design :

(A) Inside size 90×80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23

kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :

10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23

mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail length on 138 mm as per standard

drawing and suitable to with stand the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification mark to be visible even after

fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff

34 DSR-19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of -

joints etc. complete :

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

34 DSR-19.3 aggregate 40 mm nominal size) up to haunches of RCC. pipes including bed concrete as per -

standard design :

b 19.3.2 150 mm dia RCC pipe Metre 1.00 743.10 743.10

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1

35 DSR-19.27 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame -

complete as per standard design

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

C Internal Water Supply -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

36 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent -

cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall -

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 3.00 401.55 1,204.65

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 3.00 518.75 1,556.25

b 18.7.5 40 mm nominal outer dia .Pipes. Metre 8.00 702.95 5,623.60

18.7.6 50 mm nominal outer dia .Pipes. Metre 2.00 934.15 1,868.30

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

37 ,18.8 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent -

cement and the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc. -

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 15.00 537.60 8,064.00

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 5.00 627.25 3,136.25

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

38 Fire DSR - 18.8pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of -

synthetic enamel paint of required shade complete as required :

c 25 mm dia nominal bore

d 32 mm dia nominal bore

e 40 mm dia nominal bore

f 50 mm dia nominal bore

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged

cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement

: 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement

complete as per standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.00 1,992.60 1,992.60

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for tank.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Making core cutting machine up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.

and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as

to make it leak proof.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.2 32 mm nominal bore Each 1.00 689.60 689.60

18.17.3 40 mm nominal bore Each 1.00 826.10 826.10

43 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : -

Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball

44 NS 16 inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads -

complete in all respects.

a 15 mm nominal bore Each 1.00 368.00 368.00

b 20 mm nominal bore Each 1.00 513.00 513.00

Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

a 18.18.3 25 mm nominal bore Each 1.00 464.05 464.05

TOTAL Plumbing works 1,77,056.87

I SUB HEAD (I) :- INTERNAL WIRING

1 Point wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as required.

2 Group/Loop Control Point wiring in PVC conduit, with modular type switch :- -

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core

1.55 cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC -

insulated copper conductor single core cable etc. as required.

3 Twin Control Point wiring in PVC conduit, with modular type switch :- -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Wiring for twin control light point with 1.5 Sq.mm FRLS PVC insulated copper conductor single

core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular

plate,suitable GI box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

4 Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- -

Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated, copper conductor single

core cable in surface / recessed medium class PVC conduit along with 1 no. 4 Sq.mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

5 Circuit / Sub main wiring in PVC conduit :- -

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.14 insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit -

5.3 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 439.00 -

5.5 1.14.6 2 x 16 sq.mm. + 1 x 6 sq.mm. Earth wire m 772.00 -

Supply and fixing of following sizes of medium class PVC conduit along with accessories in

6 1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit -

Supplying and fixing of METAL BOX following sizes (nominal size) on surface or in recesss with

7 1.22 suitable size of phenolic laminated sheet cover in front including painting etc as required. -

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in

8 1.31 recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. Each 477.00 -

modular switch, connection etc. as required.

9 S/F power plug point modular type accessories :- -

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in

1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 Each 7.00 586.00 4,102.00

amps. modular switch, connection etc. as required.

10 S/F modular type electronic fan regulator :- -

Supply and fixing two module stepped type electronic fan regulator on the existing modular plate

1.25 switch box including connections but excluding modular plate etc. as required. Each 369.00 -

11 S/F modular type blanking plate :- -

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including

connections etc. as required.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

13 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required. Each 1.00 131.00 131.00

TOTAL SUB HEAD (I) (DSR'2022) -

II SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's -

Supplying and fixing 20 A, 240 volts, SPN industrial type socket outlet, with 2 pole and earth,

metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for the socket out let and complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C" curve, miniature circuit

2 2.1 breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete -

with connections, testing and commissioning etc. as required.

2.10.3 Double pole Each 656.00 -

2.10.4 Triple pole Each 1,007.00 -

Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/

2.4.1 4 way, Double door Each 4,091.00 -

2.4.2 6 way, Double door Each 4,974.00 -

2.4.3 8 way, Double door Each 5,967.00 -

Supplying and fixing following way Single pole and neutral, sheet steel, MCB distribution board ,

240 volts on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth

bar,din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB / RCCB / Isolator)

5.2 2.3.2 8 way, Double door Each 2,573.00 -

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 volts, TPN industrial type socket outlet, with 4 pole and earth,

metal enclosed plug top alongwith 20 amps “C” curve, TP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for the socket out let and complete with

connections, testing and commissioning etc. as required.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in

12 1.57 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" EACH 727.00 -

curve including connections, painting etc. as required

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in

13 1.56 recess including providing and fixing 2 nos 3 pin 5/6 amps modular socket outlet and 2 nos 5/6 Each 676.00 -

amps. modular switch, connection etc. as required.

Supplying and fixing DP sheet steel enclosure on surface / recess along with 25/32 amps 240

14 2.16 volts, "C" curve DP MCB complete with connections, testing and commissioining etc as required. Each 1,169.00 -

Supplying and fixing TPN sheet steel enclosure on surface / recess along with 16/25/32 amps

15 2.17 415 volts, "C" curve TPN MCB complete with connections, testing and commissioining etc as Each 1,592.00 -

TOTAL SUB HEAD (II) (DSR'2022) -

III SUB HEAD (III) :- EARTHING -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe etc.

with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing along with

existing surface / recessed conduit / submain wiring / cable as required.

TOTAL SUB HEAD (III) (DSR'2022) -

IV SUB HEAD (IV) :- INTERNAL LIGHTING FIXTURES & FANS -

LIGHTING FIXTURES & FANS -

Supply, installation, testing and commissioning of wall / ceiling / LED light luminaires with all

1 MR accessories as per standard item etc complete as required as per the standard catalogue item. -

Supply, installation, testing and commissioning of 2ft 10W LED Batten delivering an initial

system lumen of 1000 lumens & the luminaire shall be with system efficacy ≥ 100 lm/W. The

housing should be made of Extruded Aluminium with polycarbonate diffuser. The operating CCT

shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with

input voltage range of 150 to 270V , PF ≥ 0.9 ,THD ≤ 10%, 50,000 Hrs LED Life with L70 Criteria

and Ingress Protection of IP20. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along

with Photo Biological Safety Standard.

Wipro Cat. Ref. LL20-111-XX65AL5IB (Trim Neo LL20 Series)

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, installation, testing and commissioning of 4ft 20W LED Batten delivering an initial

system lumen of 2000 lumens & the luminaire shall be with system efficacy ≥ 100 lm/W. The

housing should be made of Extruded Aluminium with polycarbonate diffuser. The operating CCT

shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with

input voltage range of 150 to 270V , PF ≥ 0.95 ,THD ≤ 10%, 50,000 Hrs LED Life with L70 Criteria

and Ingress Protection of IP20. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along

with Photo Biological Safety Standard.

Wipro Cat. Ref. LL20-281-XX57AL5IB

Supply, installation, testing and commissioning of 24W Surface Mounted Round Led

Downlighter delivering minimum system lumen of 2400 lm & the luminaire shall be with system

efficacy ≥ 100 lm / W. Housing is Pressure Die Cast Aluminium, powder coated white with Optics:

HET Diffuser. Ingress Protection should be IP20. The operating CCT shall be 5700K with CRI of

≥80. The luminaire shall be BIS Registered with isolated type electronic driver in polycarbonate /

metal enclosure with input voltage range of 100 to 265V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs

LED Life with L70 Criteria. The LED Driver shall be of same make and made in India for ease of

repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection

of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED

manufacturer along with Photo Biological Safety Standard.

Wipro Cat. Ref. LD06-301XXX-57SMBT

Supply, installation, testing and commissioning of 18W Surface Mounted Round Led

Downlighter delivering minimum system lumen of 1800 lm & the luminaire shall be with system

efficacy ≥ 100 lm / W. Housing is Pressure Die Cast Aluminium, powder coated white. IP20 ,

Optics: HET Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be

BIS Registered with isolated type electronic driver in polycarbonate / metal enclosure with input

d MR voltage range of 100 to 265V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria. Nos. 10.00 2,722.00 27,220.00

The LED Driver shall be of same make and made in India for ease of repair and service. The LED

shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall

be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo

Biological Safety Standard. Wipro Cat. Ref. LD06-221XXX-57SMBT

Supply, installation, testing and commissioning of 10W Bulkhead delivering minimum system

lumen of 1000 lm & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing & Rim is

Pressure Die Cast Aluminium. The Luminaire shouuld have ingress protection of IP65 and IK

rating of IK08 along with Opal Polycarbonate Diffuser. The operating CCT shall be 5700K with

CRI of ≥80. The luminaire shall be BIS Registered and should have input voltage range of 140 to

280V along with THD ≤ 10% & PF ≥ 0.95. The Luminaire shouuld have a life class of 50,000 Hrs

LED Life with L70 Criteria. Luminaire shall have minimum surge protection of 2.5KV. The

luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along

with Photo Biological Safety Standard. Wipro Cat. Ref. LW07-141-XXX-57-G1

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, installation, testing and commissioning of 18W Recess Mounted Round Led Downlighter

delivering minimum system lumen of 1890 lm & the luminaire shall be with system efficacy ≥ 105

lm / W. Housing & Rim is Pressure Die Cast Aluminium, powder coated white with Optics: HET

Diffuser.The Luminaire shoul have minimum Ingress protection of IP40. The operating CCT shall

be 5700K with CRI of ≥80. The luminaire shall be BIS Registered with isolated type electronic

driver in polycarbonate / metal enclosure with input voltage range of 100 to 265V , THD ≤ 10% &

PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be of same make and

made in India for ease of repair and service. The LED shall be SMD type. Luminaire shall have

minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 &

LM80 issued by LED manufacturer along with Photo Biological Safety Standard. Wipro Cat. Ref.

Supply, installation, testing and commissioning of 15W Recess Mounted Round Led Downlighter

delivering minimum system lumen of 1650 lm & the luminaire shall be with system efficacy ≥ 110

lm / W. Housing & Rim is Pressure Die Cast Aluminium, powder coated white with Optics: HET

Diffuser.The Luminaire shoul have minimum Ingress protection of IP40. The operating CCT shall

be 5700K with CRI of ≥80. The luminaire shall be BIS Registered with isolated type electronic

driver in polycarbonate / metal enclosure with input voltage range of 100 to 265V , THD ≤ 10% &

PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be of same make and

made in India for ease of repair and service. The LED shall be SMD type. Luminaire shall have

minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 &

LM80 issued by LED manufacturer along with Photo Biological Safety Standard. Wipro Cat. Ref.

Supply, installation, testing and commissioning of Indoor 15W LED Flexible Strip Light(5 Mtr)

with driver as per Trilux / Philips/ or EQ.

Supply, installation, testing and commissioning of 2'x2' 36W luminaire delivering an initial

system lumen of 3600 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W.

Housing: CRCA white powder coated white, Optics: HET polycarbonate, IP20 Protection. The

operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be BIS Registered with

isolated type electronic driver in polycarbonate / metal enclosure with input voltage range of 150

to 270V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall

be of same make and made in India for ease of repair and service. The LED shall be SMD type.

Luminaire shall have minimum surge protection of 3KV with High and Low Input Voltage Cutoff

protection. The luminaire shall be with following certifications: LM79 & LM80 issued by LED

manufacture along with Photo Biological Safety Standard. Wipro Cat. Ref.

CRCO10R038HP57G1L5 (36W 2x2 Panel)

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, installation, testing and commissioning of 36-45W Recess mounted LED 2'x2' luminaire

delivering an initial system lumen of 4500 lumens & the luminaire shall be with system efficacy ≥

125lm/W. Housing: CRCA white powder coated white, Optics: HET polycarbonate, IP20

Protection. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be BIS

Registered with isolated type electronic driver in polycarbonate / metal enclosure with input

voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.90, 50,000 Hrs LED Life with L70 Criteria.

The LED Driver shall be of same make and made in India for ease of repair and service. The LED

shall be SMD type. Luminaire shall have minimum surge protection of 3KV with High and Low

Input Voltage Cutoff protection. The luminaire shall be with following certifications: LM79 & LM80

issued by LED manufacture along with Photo Biological Safety Standard.

Wipro Cat. Ref. CRCO10R036HP57HEG2 (36W Higher efficacy 2x2 Panel)

Supply, installation, testing & commissioning of Integral, SMD 2x2 LED, IP 65 from front, IK02

42W LED Recess mounted Bottom Opening Clean Room fixture with System efficacy of more

than 100 lm/W (4200 lumens). Luminaire shall be made up of CRCA Housing with CRCA Powder

Coated Bottom Frame. Luminaire shall have satin finished translucence (HET) diffuser for

Uniform illumination and wider light distribution. LM 80-08 compliant LEDs from reputed makes

should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological

safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD

type LED. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs

tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000

hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80, SDCM<3.

LED Driver shall be with proper heat sink for heat dissipation suitable to operate in input voltage

range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, Power

factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to

the luminaire. Wipro Cat. Ref. LC20-551-XXX-57-G2 (42W Cleanroom Fixture)

Supply, installation, testing and commissioning of surface type LED fixture having multi power

options 20W/ 10W/ 0.5W of minimum 650 length with asthetically designed extruded aluminium

housing & injection moulded PC component diffuser with efficacy better than 80 lm/W (minimum

l MR total lumen delivered package 2530), with CCT option =3000/4000/5000K, PF>0.95, THD<10% & Nos. 10,173.00 -

with driver having efficiency >80%. Service life of 50,000 hours @ L70 etc complete as required.

Wipro Cat. Ref. LW04-XXX-57-XX or approved Equivalent.

Supply, installation, testing and commissioning of Aviation obstruction light with LED lamp,

m MR toughened clear glass, with all accessories as per standard item with all accessories. Nos. 4,329.00 -

SUPPLY OF CEILING & EXHAUST FANS -

Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts, mounting frame,

and other accessories etc. complete

300 mm sweep (Heavey Duty) Nos 3.00 1,653.00 4,959.00

TOTAL SUB HEAD (IV) (NON-DSR) -

V ERECTION OF FANS -

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Rate Amount

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan

with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long

down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than

0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance

3 19.1 as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control Each 2,730.00 -

and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75

degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single

phase AC Supply, earthing etc. complete as required.

Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required

TOTAL Electrical works 1,59,807.00

Gross Total Amount (Toilet Block) 19,78,598.00

Gross Total Amount (Toilet Block) 19,78,598.00

Gross Total Amount (Director's Residence + Toilet Block) 1,41,06,991.00

Gross Total Amount (Director's Residence + Toilet Block) 1,41,06,991.00

Digitally signed by AKSHIT