REPAIR/MAINT OF BLDGS INTERNAL WATER SUPPLY AND LEAKAGE SEEPAGE IN TOILETS WITH ALLIED WORKS AT SANJOG CHHETRI VIHAR IN THE AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 sqm each, and removing from site, all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from site all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each all as specified and directed

S&F mild steel framed work as in doors or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings, Fe-410W (Gde-E-250) quality-A, complete all as specified and directed.

S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Taking down existing MS gate shutters and rexing in the same opening after necessary weldings, repairs to bush, holdfast etc and making the shutter functional, area of each shutter n.exc 4 sqm each complete all as specified and as directed.

M&L plain cement concrete cast in situ Type B1 1:2:4 (20 mm graded aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed.

S&F pressed steel frame for door with one or more rebates of size 125x60mm including necessary fixing lugs, lock striking plates,hinges 03 nos of 100mm size ,hold fasts etc. , size /profile of frame as per IS, complete all as specified & directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges 06 nos of 100 mm size ,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F 30mm thick factory made flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded, complete all as specified & directed.

M&L 18-19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed.

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacturer's instructions complete all as specified and directed.

M & L for 6mm thick external teak wood lipping for block board or veneered particle board , fixed with nails, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed.

S&F 100 mm long, fancy type, stainless steel handles, complete all as specified and directed.

S&F magnet catcher for cup board shutter complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete, all as specified and directed.

M&L 2nd class hard wood, plain fillets, square or rectangular or tringular in section clean sawn sectional area not exc 3 sqcm fixed with nail, complete, all as specified and directed.

S&F 100 mm size butt hinges, medium weight, stainless steel, and fixed all as specified and directed.

S&F in repair butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed.

S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed.

S&F aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F in repairs aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate, fixing by welding or screws as required complete all as specified & directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed as in Existing iron /wooden frame in own arrangement).

S&F, 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading in steel/wooden door/window/ ventilator and making good the disturbed portion during execution, complete all as specified and directed.

S&F 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of door complete all as specified and directed.

M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L for preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed.

Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles.

M & L for brick work using old size fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete, all as specified and directed.

Ditto but except bricks.

Taking down cement plaster on brick or stone walls etc including ranking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4, finished surface even and fair with out using extra cement, complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.

M & L of preparation of newly plastered surface of wall and applying two coats of oil bound distemper, complete all as specified and directed.

M&L for preparation of newly wall surfaces and applying two coats of cement base paint on surfaces of walls, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles (joint free) of size 300x600x 8mm to 10mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.

M&L cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n'exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L, 40mm thick cement concrete 1:2:4 type B-1using 20mm graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 n exc 500 ltrs complete all as specified and directed.

S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm dia float valves all as specified in SSR Part I and including dismantling of existing tank, complete all as specified and directed.

S&F, in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repair gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F in repair gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.

S&F steel water GI tubing 15mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.

S&F steel water GI tubing 20mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.

S&F steel water GI tubing 25mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.

Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth all as spcefied and directed.

S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste fittings/coupling, PVC waste pipe MS brackets complete all as specified and directed.

S&F, in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe all as specified and directed.

S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure, crutch or butterfly handle, ,screwed both end for pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per sample given by Engr-in-Charge, complete all as specified and directed.(Including taking down existing spindle carefully and fixed the same in position).

S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F, in repair, 10 Ltrs capacity, PVC valveless, syphonic action type, ISI Marked, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.00 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete, all as specified and directed.

S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white including connection to trap and cistern, flush pipe, PVC seat cover and making good disturbed surface of floor complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete, all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

Supply and fixing 32mm bore Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified.

S&F in repair CP Shower rose with arms 15mm bore ans size 125 mm complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F, in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm bore, all as specified and directed.

S&F in repair, PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement (Diameter of outlet 75mm) all as specified and directed.

S&F in repair, CP grating with waste pipe hole 100 mm dia, complete all as specified and directed.

S&F in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long all as specified and directed.

S&F, in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S&F in repairs, PVC coated, MS curtain rods 22 - 25 mm dia with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod all as specified and directed.

S&F in repairs 110 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete

S&F, in repair, 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair CP brass health faucet not exc 1.25 m long flexible tube including wall hook complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed.

S&F 4 mm thick E-board of size 600 mm x 600 mm and 4 mm thick, white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

Repair to leakage/sepage from toilets and bathroom by taking down and refixing of joints of CI/GI pipes with solvent/ M- seal of including taking down and refixing existing false ceiling and making good the disturbed surface complete all as specified and directed.

S&F in repair 20mm outer dia 3-layer PP-R poly propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall,ceilings or in floors all as specified and directed .

S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm adapter incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed.

S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm elbow incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed.

S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm TEE incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed.

S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12-16x20-25x25-32 mm tank TEE complete all as specified and as directed.

S&F in repairs 3-layer PP-R poly propylene random copolymer, 25-32 mm plain TEE complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on wall, complete all as specified & as directed.

All as per description of serial item no. 115 above but applying applying one coat of white wash on ceiling surfaces.

All as per description of serial item no. 115 above but applying applying two coat of white wash on wall surfaces.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint, complete, all as specified & directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down & stopping of painted surfaces and applying two coat of cement base paint, complete, all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint, complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and as directed.

Complete removal of existing treatment from wall applying two coats of oil bond distemper over two coats of wall care putty (2 mm thick) to make surface even and smooth, and complete all as specified and directed.

M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint, all as directed.

QUALITY CONSTRUCTIONS CO (BID ID -3241275)

Total Construction & Management Services (BID ID -3241838)

M/s Chandra Mohan and Sons (BID ID -3241233)

M/S Nirdosh Sahu and sons (BID ID -3241643)

Yadav Builders (BID ID -3241593)

M/S SWATI CONSTRUCTION (BID ID -3241335)