CONSTRUCTION OF TOILET COMPLEX (SINGLE STOREY) IN THE CAMPUS OF CIVIL COURT SAMASTIPUR IN DISTT-SAMASTIPUR

Prov Un- Skilled labour for site cleaning

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kind of soil.

Extra for every additional lift of 1.5 m or part thereof in : All kinds of soil.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing - All works up to plinth level

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating eachdeposited layer by ramming and watering lead

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing - All work above Plinth level upto floor V Level.

Reinforcement for R.C.C. work including straightening, cutting, ending, placing in position and binding all complete.

Centring and shuttering including strutting,propping etc. and removal of form for.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:6 (1 cement: 6 coarse sand ). Extra tor Brick work in superstructure above plinth level upto floor V cum.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:4 (1 cement: 4 coarse sand ). Extra tor Brick work in superstructure above plinth level upto floor V cum.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing 12mm CP in cm (1:6) with clean coarse sand etc all complete job as per building specification & direction of E/I.

Providing 15mm CP in cm (1:6) on rough side of single or half brick wall with clean coarse sand etc all complete job as per building specification & direction of E/I.

Providing 6mm cement plaster in cm (1:4) in ceiling etc all complete job as per building specification & direction of E/I.

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groovecomplete as per specifications and direction of the Engineer-in- Charge.

Providing 12mm thick CP in cm (1:4) with punning etc all complete job as per building specification & direction of E/I.

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l,

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturer) of 1 st quality conforming to IS :13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent makein colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20mm thick cement motar 1:4 (1 cement: 4 Coarse sand) includinggrouting the joints with white cement and matching pigments etc,complete.

Providingand fixing18mmthickgangsawcut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize,approvedshade, colourandtexture laidover20mm thick base cementmortar 1:4 (1 cement : 4coarse sand), joints treatedwithwhite cement, mixedwithmatching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm

Chequerred terrazo tiles 22 mm thick with marble chips of sozes upto 6mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand)

Providingand fixing18mmthickgangsawcut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize,approvedshade, colourandtexture laidover20mm thick base cementmortar 1:4 (1 cement : 4coarse sand), joints treatedwithwhite cement, mixedwithmatching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm

Providing and fixing factory made uPVC white colour casement/ Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length .

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings with rawl plugs screws etc

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade New work (two or more coats )over and including primingcoat with cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providingand fixingwhitevitreous chinapedestal typewater closet (Europeantype)withseatandlid,10litrelowlevelwhitevitreouschina flushingcistern&C.P. flushbendwithfittings&C.I.brackets, 40mm flushbend,overflowarrangementwithspecialsof standardmakeand mosquito proof coupling of approved municipal design complete, includingpaintingof fittingsandbrackets,cuttingandmakinggoodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall cornertypelipped front urinal basin of 430x260x350 mm and 340x410x265mmsizes respectively with automatic flushing cistern with standardflushpipe and C.P. brass spreaders with brass unions and G.Iclampscomplete, including painting of fittings and brackets,cuttingmakingood the walls and floors wherever required Oneurinalbasinwithlitrwhite P.V.C. automatic flushingcistern

ProvidingandfixingwashbasinwithC.I.brackets, 15mmC.P. brass pillar taps, 32mmC.P. brasswaste of standard pattern, including paintingof fittingsandbrackets, cuttingandmakinggood thewalls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete.

Providing and fixing 15mm nominal bore C.P. brass bib cock etc all complete job as per building specification & direction of E/I.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than810gms.15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. ofqualityand make as approved by Engineer - in - charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

ProvidingandfixingPTMTtowel ringtrapezoidalshape215mmlong, 200mmwidewithminimumdistancesof 37mmfromwall facewith concealedfittingsarrangementofapprovedqualityandcolour,weighing not less than 88 gms

Providing and fixing 25mm nominal ball valve (brass) of approved quality etc all complete job as per building specification & direction of E/I. 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. etc all complete job as per building specification & direction of E/I.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing toilet paper holder C.P. brass

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. etc all complete job as per building specification & direction of E/I.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :With common burnt clay F.P.S. (non modular)bricksof classdesignation 7.5

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement: 4corsa sand and making good the wall etc complete

Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

Local sand

Coarse Sand

Stone Chips

Bricks

Cement

Bricks

Diaper Changing Station

Sanitary Vending M/C (420*180*449)

Paper holder

B C D Samastipur

Description

BCD ROSERA

Earth work excavation in foundation

S/F local sand

Pro. 100A B/F/S

P/L PCC(1:1.5:3) with chips

Pro 100A B/W (1:6) with coarse sand

P/L RCC M20in beam and slab with stone chips

Pro 12mm CP (1:3) with coarse sand

Pro centering and suttering beam

Pro MS Reinforcement

Local sand

coarse sand

Stone Chips

Brick

cement

Brick

BCD ROSERA

Description

BCD,ROSERA

Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples form different strata, preparing and submitting strata chart / bore log, including hire & running Charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level, all type of soil.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Gravel packing in tube well construction in accordance with IS: 4097 including providing gravel fine / medium / coarse, in required grading and size as per actual requirement all complete as per direction of E/I.

Providing and fixing suitable size threated mild steel cap or spot welded plate to the top of bore well housing / Casting pipe, removable as per requirement, all complete for borewell of :

Development of tube well in accordance with IS : 2800 (part I ) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory,i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tube well as per IS : 2800 (part I ), including necessary bots & nuts of required size complete.

Providing and fixing Ball plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (Part I)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Supplying and fittings 1.00 HP Submersible water pump with starter cables etc. all necessary fitting etc. all complete jobs.

BCD ROSERA

Executive Engineer

(BCD) Saharsa

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming o

Supplying and Filling in plinth with local sand and under floors including

pro 100A B/F/S

P/L PCC (1:2:4) wityh s/c

Prov.and laying RCC M20 in foundation & footing

0.50/3*(4.00*4.00+1.33*1.33+un root((4.00*4.00)*(1.33*1.33)

Prov.and laying RCC M20 in column

Prov.and laying RCC M20 in beam/slab

Centring and shuttering including strutting,propping etc. and removal

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand )

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand )Extra tor Brick work in superstructure above plinth level upto floor V

15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half bric

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubula

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with

12 mm cement plaster of mix:1:4(1 cement :4 coarse sand)

prov 6mm CP( 1:4 ) to ceiling

15 mm cement plaster on rough side of single or half brick wall of1:4(1 cement: 4 coarse sand )

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .new work

Finishing walls with Acrylic Smooth exterior paint

Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone grading for Roof

Painting with synthetic enamel paint

P/F kota stone slab flooring

P/F kota stone flooring for skirting

P/F Chequerred tiles

P/F Stainless Steel Railing

P/F curtain rod

P/F fly proof jali

Providing and fixing on wall face unplastidsed-PVC(110 mm diamete

Providing and fixing on wall face unplasticised110 mm bend

Providing and fixing unplasticised -PVC pipe clip of a

Providing 250mm wide brick drain

Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim

supply of labour for site clearance

local sand

coarse sand

stone chips

Brick

cement

Brick

BCD SAHARSA

Description

BCD, SAHARSA

SOLD TO :-

Prov Un- Skilled labour for site cleaning

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kind of soil.

Extra for every additional lift of 1.5 m or part thereof in : All kinds of soil.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/.

P/L PCC (1:1.5:3) with stone chips

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing - All works up to plinth level

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating eachdeposited layer by ramming and watering lead

Pro. 100A Brick work in C.M (1:6) with coarse sand

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 250mm/125mm wall from GB to plinth level

P/L RCC M20in beam and slab with stone chips

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing - All work above Plinth level upto floor V Level.

Reinforcement for R.C.C. work including straightening, cutting, ending, placing in position and binding all complete.

Centring and shuttering including strutting,propping etc. and removal of form for.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:6 (1 cement: 6 coarse sand ). Extra tor Brick work in superstructure above plinth level upto floor V cum.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:4 (1 cement: 4 coarse sand ). Extra tor Brick work in superstructure above plinth level upto floor V cum.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibrematt consisting of a coat of bitumen primer for bitumen [email protected] litre/ sqmbythesamemembrane manufacturedofdensityat25°C,0.87-0.89kg/ litreandviscocity70 160cps.Over theprimercoat thelayerofmembraneshallbelaidusing butane torch and sealing all joints etc., and preparing the surface complete. Thevital physical and chemical parameters of themembrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300N/5cm. Tear strength in longitudinal and transverse direction as 60/80N.Softening point of membrane not less than150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM,D-5147.The laying of membrane shall be got done through the authorisedapplicator of the manufacturer of membrane. 3 mm thick.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing 12mm CP in cm (1:6) with clean coarse sand etc all complete job as per building specification & direction of E/I.

Providing 15mm CP in cm (1:6) on rough side of single or half brick wall with clean coarse sand etc all complete job as per building specification & direction of E/I.

Pro 12mm CP (1:3) with coarse sand

Providing 6mm cement plaster in cm (1:4) in ceiling etc all complete job as per building specification & direction of E/I.

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groovecomplete as per specifications and direction of the Engineer-in- Charge.

Providing 12mm thick CP in cm (1:4) with punning etc all complete job as per building specification & direction of E/I.

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l,

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing18mm thick gang saw cut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over20mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm

Chequerred terrazo tiles 22 mm thick with marble chips of sozes upto 6mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand)

Providing and fixing factory made uPVC white colour casement/ Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length .

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacturer’s specification and direction of Engineer-in-charge.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade New work (two or more coats )over and including primingcoat with cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet(Europeantype)with seat and lid,10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &C.I.brackets, 40mm flush bend,over flowar range ment with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fitting sand brackets,cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets,cutting making good the walls and floors wherever required One urinal basin with litr white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32mmC.P. brasswaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Providing and fixing 15mm nominal bore C.P. brass bib cock etc all complete job as per building specification & direction of E/I.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than810gms.15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. ofqualityand make as approved by Engineer - in - charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long,200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms

Providing and fixing 25mm nominal ball valve (brass) of approved quality etc all complete job as per building specification & direction of E/I. 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. etc all complete job as per building specification & direction of E/I.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing toilet paper holder C.P. brass

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. etc all complete job as per building specification & direction of E/I.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :With common burnt clay F.P.S. (non modular)bricksof classdesignation 7.5

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement: 4corsa sand and making good the wall etc complete

Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples form different strata, preparing and submitting strata chart / bore log, including hire & running Charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level, all type of soil.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Gravel packing in tube well construction in accordance with IS: 4097 including providing gravel fine / medium / coarse, in required grading and size as per actual requirement all complete as per direction of E/I.

Providing and fixing suitable size threated mild steel cap or spot welded plate to the top of bore well housing / Casting pipe, removable as per requirement, all complete for borewell of :

Development of tube well in accordance with IS : 2800 (part I ) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory,i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tube well as per IS : 2800 (part I ), including necessary bots & nuts of required size complete.

Providing and fixing Ball plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (Part I)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Local sand

Coarse Sand

Stone Chips

Bricks

Cement

Bricks

Diaper Changing Station

Sanitary Vending M/C (420*180*449)

Paper holder

Supplying and fittings 1.00 HP Submersible water pump with starter cables etc. all necessary fitting etc. all complete jobs.