Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAdmitted-Finance PLOT NO 129 NEAR KASHIRAM TEXTILE MILL NAROL ROAD AHMEDABAD GUJARAT 382405 | AHMADABAD | GUJARAT | 382405 | L1 | Admitted-Finance | |
| 2 | L1₹21.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 3 | L1₹34.7 LAdmitted-Finance 213 RUBY INDUSRIAL ESTATE CHINCHOLI BUNDER ROAD OFF LINK ROAD MALAD WEST MUMBAI MAHARASHTRA 400064 | MUMBAI SUBURBAN | MAHARASHTRA | 400064 | L1 | Admitted-Finance | |
| 4 | L1₹55.5 LAdmitted-Finance C 30 JAI MATADI COMPOUND KALHER VILLAGE THANE BHIWANDI ROAD KALHER THANE THANE MAHARASHTRA 421302 | THANE | MAHARASHTRA | 421302 | L1 | Admitted-Finance | |
| 5 | L1₹65.2 LAdmitted-Finance D115 GHATKOPAR INDUSTRIAL ESTATE L B S MARG GHATKOPAR WEST MUMBAI MAHARASHTRA 400086 | MUMBAI SUBURBAN | MAHARASHTRA | 400086 | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Reynold Valves Limited L1 | NITON VALVE INDUSTRIES PVT LTD L1 | 2L ENGINEERS L1 | nilon valves private limited L1 | HAWA ENGINEERS LIMITED L1 | DEMBLA VALVES LIMITED L1 | Belgaum Aqua Valves Pvt Ltd. L1 | Rappid Valves India Private Limited L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE-NON FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition. | |||||||||||
| 1.00 | BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 7 | Nos | 3,00,510 ₹3,00,510 Lowest | 8,08,500 ₹8,08,500 | - | 8,89,000 ₹8,89,000 | - | 5,21,562.5 ₹5,21,562.5 | 8,50,274 ₹8,50,274 | 11,42,925 ₹11,42,925 |
| 1.00 | BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 17 | Nos | 15,70,800 ₹15,70,800 Lowest | 26,77,500 ₹26,77,500 | - | 33,15,000 ₹33,15,000 | - | 23,53,890 ₹23,53,890 | 36,02,497 ₹36,02,497 | 52,12,761 ₹52,12,761 |
| 1.00 | BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 15 | Nos | 1,39,125 ₹1,39,125 Lowest | 4,01,625 ₹4,01,625 | - | 6,37,500 ₹6,37,500 | - | 1,98,115.7 ₹1,98,115.7 | 5,60,590 ₹5,60,590 | 6,09,330 ₹6,09,330 |
| 1.00 | BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 1 | Nos | 10,600 ₹10,600 Lowest | 41,475 ₹41,475 | - | 85,000 ₹85,000 | - | 28,796.38 ₹28,796.38 | 63,112 ₹63,112 | 91,596 ₹91,596 |
| 1.00 | BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 5 | Nos | 1,43,100 ₹1,43,100 Lowest | 2,14,200 ₹2,14,200 | - | 5,60,000 ₹5,60,000 | - | 1,92,581.9 ₹1,92,581.9 | 3,58,825 ₹3,58,825 | 5,96,230 ₹5,96,230 |
| 1.01 | BALL VALVE CS, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 37 | Nos | 1,70,940 ₹1,70,940 Lowest | 5,63,325 ₹5,63,325 | 4,62,500 ₹4,62,500 | 10,17,500 ₹10,17,500 | 1,78,932 ₹1,78,932 | 2,54,708.56 ₹2,54,708.56 | 4,94,676 ₹4,94,676 | 8,48,484 ₹8,48,484 |
| 2.00GROUP-2 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE- FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition. | |||||||||||
| 2.00 | BALL VALVE CS (NACE), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 3.5 KG/CM2(G), DESIGN TEMPERATURE 300 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 1 | Nos | 11,250 ₹11,250 Lowest | 36,750 ₹36,750 | 32,500 ₹32,500 | 68,000 ₹68,000 | 35,483 ₹35,483 | 80,691.49 ₹80,691.49 | 48,504 ₹48,504 | 75,479 ₹75,479 |
| 2.00 | BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED. | 1 | Nos | 30,500 ₹30,500 | 26,250 ₹26,250 | 8,500 ₹8,500 | 49,000 ₹49,000 | 3,425 ₹3,425 Lowest | 23,448.04 ₹23,448.04 | 36,153 ₹36,153 | 20,573 ₹20,573 |
Tender Value
Refer Docs
Closing Date
15 May 2025, 3:00 pmClosed
Mr Amit Borkar
thyssenkrupp Uhde India Private Limited UHDE House, LBS Marg, Vikhroli(W), Mumbai - 400083, India
SUPPLY OF BALL VALVE FIRE SAFE _NON-FIRE SAFE FOR AG_UG PIPING FOR MSB _PFCC_GDS and FF Units for NREP
2025_NRL_855796_1
TK-1ZZZA-MP-RFQ-0182
Limited
Miscellaneous Goods
Supply
180 days
Numaligarh Refinery Limited Assam India
As per tender details
6 documents required · 6 mandatory
₹0
Exempted
25 Sept 2025
7 Apr 2025
16 May 2025
7 Apr 2025
15 May 2025
22 Apr 2025
7 Apr 2025 - 19 Apr 2025
GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE-NON FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP-2 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE- FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE CS (NACE), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 3.5 KG/CM2(G), DESIGN TEMPERATURE 300 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 44.6 KG/CM2(G), DESIGN TEMPERATURE1 190 DEG.C, DESIGN PRESSURE2 13.2 KG/CM2(G), DESIGN TEMPERATURE2 80 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, SS 304, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12.2 KG/CM2(G), DESIGN TEMPERATURE 340 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE EXT. BONNET LTCS, 600,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, EXT. BONNET ACC. TO BS 6364, (NON-COLD BOX APPLICATION), A350LF2CL1/A352GrLCB, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 66.5 KG/CM2(G), DESIGN TEMPERATURE 70 DEG.C, DESIGN PRESSURE -1.01 KG/CM2(G), DESIGN TEMPERATURE -45 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP-3 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE- FIRE SAFE_SS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL, 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL (H2 SER., 600,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 44.6 KG/CM2(G), DESIGN TEMPERATURE 190 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
Description of Work / Item(s)
Amount
GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE-NON FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 19 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP-2 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE- FIRE SAFE_CS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE CS (NACE), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 3.5 KG/CM2(G), DESIGN TEMPERATURE 300 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 44.6 KG/CM2(G), DESIGN TEMPERATURE1 190 DEG.C, DESIGN PRESSURE2 13.2 KG/CM2(G), DESIGN TEMPERATURE2 80 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, SS 304, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12.2 KG/CM2(G), DESIGN TEMPERATURE 340 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE EXT. BONNET LTCS, 600,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, EXT. BONNET ACC. TO BS 6364, (NON-COLD BOX APPLICATION), A350LF2CL1/A352GrLCB, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 66.5 KG/CM2(G), DESIGN TEMPERATURE 70 DEG.C, DESIGN PRESSURE -1.01 KG/CM2(G), DESIGN TEMPERATURE -45 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP-3 (GROUP WISE EVALUATION) SUPPLY OF BALL VALVE- FIRE SAFE_SS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL, 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
BALL VALVE SS DUAL (H2 SER., 600,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, SS 316, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 44.6 KG/CM2(G), DESIGN TEMPERATURE 190 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2L ENGINEERS (BID ID -3208216)
Reynold Valves Limited (BID ID -3206737)
DEMBLA VALVES LIMITED (BID ID -3214846)
NITON VALVE INDUSTRIES PVT LTD (BID ID -3207545)
Belgaum Aqua Valves Pvt Ltd. (BID ID -3214796)
nilon valves private limited (BID ID -3208279)
Rappid Valves India Private Limited (BID ID -3215275)
NITON VALVE INDUSTRIES PVT LTD (BID ID -3207545)
2L ENGINEERS (BID ID -3208216)
nilon valves private limited (BID ID -3208279)
Reynold Valves Limited (BID ID -3206737)
Belgaum Aqua Valves Pvt Ltd. (BID ID -3214796)
DEMBLA VALVES LIMITED (BID ID -3214846)
Rappid Valves India Private Limited (BID ID -3215275)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .