Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹32.4 L
EMD Value
₹64,800
Closing Date
28 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of Extended Security Building Facility at Foundry and Forge Division HAL BC.
9728
TENDER NOTICE/NCP/29/24-25/01
Works
Contract Section Civil-FMD-Bangalore
₹0
₹64,800
28 Oct 2024
20 Sept 2024
20 Sept 2024
28 Oct 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earthwork in excavation in all types of soil by mechanical means/ manual means over areas (not exceeding 1.50m. in width or 10 sqm. on plan), dressing of sides, ramming of bottom for all lift and getting out and disposal of excavated earth, etc., all complete as directed by Engineer-in-Charge.
Dismantling & demolishing the existing bituminous surface for making the foundation pits and other construction works by manual/ mechanical means and disposal of dismantled materials upto a lead of 10 km, as per the direction of Engineer-in-Charge (To be disposed outside the division as per BBMP & Pollution Control Board guidelines at contractor's own risk, cost and responsibility including loading, transportation and unloading through required capacity latest mechanical equipment, avoid spillage of debris, including disposal with required tools and equipments, safety equipments like gum boots, hand gloves, mask, including all taxes, octroi, any other charges as applicable), etc., all complete as directed by Engineer-in-Charge.
Cement concrete 1:1.5:3, (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural resources), etc., all complete as directed by Engineer-in-Charge.
Cement concrete 1:2:4, (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural resources), etc., all complete as directed by Engineer-in-Charge.
Cement concrete 1:3:6, (1 cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural resources), etc., all complete as directed by Engineer-in-Charge.
Cement concrete 1:4:8, (1 cement : 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural resources), etc., all complete as directed by Engineer-in-Charge.
Centering & shuttering including strutting & propping etc. and removal of form for concreting work at all levels, , etc., all complete as directed by Engineer-in-Charge.
Providing & fixing TMT steel bars of Grade Fe-500 or more for RCC work including straightening, bending, placing in position and binding, etc., all complete as directed by Engineer-in-Charge.
Providing & laying factory made Precast concrete blocks of 200mm thickness of grade M10 made of C&D waste from approved manufacture for foundation & superstructure upto 5th Floor in Cement Mortar 1:6 (1 cement: 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Providing & laying brickwork with common burnt clay modular brick of class designation 7.5 in foundation, plinth & superstructure in C.M. 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Providing 15mm thick Plastering in CM 1:4 (1 cement : 4 Fine sand), etc., all complete as directed by Engineer-in-Charge.
Painting plastered exterior surfaces at all heights with ready mixed Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS:15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon addetives on new work with two or more coats applied @ 1.43 litre/ 10 sqm. over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm, etc., all complete as directed by Engineer-in-Charge.
Providing & applying white cement based putty of average thickness 1mm, of approved brand & manufacturer, over plastered wall surface to prepare the surface even & smooth, etc., all complete as directed by Engineer-in-Charge.
Painting (two coats) with premium acrylic emulsion paint of interior grade, having VOC content less than 50gms/ litre of approved brand & manufacture, including applying additional coats, wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Fiber Glass reinforced Plastic (FRP) door frames of cross section 90mm X 45mm having single rebate of 32mm X 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stays shall be provided at the bottom to steady the frame etc. complete as per manufacturer's specification and direction of Engineer-in-charge
Providing & fixing 30mm thick Fiber Glass reinforced Plastic (FRP) door shutter in different plain & wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden block inside at required places for fixing of fittings and ployurethane foam (PUF)/ Poly sterane foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminate conforming to table-3 of IS:14856, etc., all complete as directed by Engineer-in-Charge.
Providing & fixng wooden door frame made of Sal wood, wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia. & length, complete in all respects, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing ISI marked 30 mm thick flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, including ISI marked Stainless steel butt hinges with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing of powder coated aluminium (minimum thickness of powder coating 50 micron) works for the fixed portions of doors, windows, ventilators & partitions with extruded built-up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions ie, at top, bottom & sides with required EPDM rubber/ neoprine gaskets etc. Aluminium sections shall be smooth, rust-free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P Brass/ Stainless steel screws, all complete as per architectural drawing and directions by Engineer-in-charge
Providing & fixing of powder coated aluminium (minimum thickness of powder coating 50 micron) works for the shutters of doors, windows & ventilators with extruded built-up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions ie, at top, bottom & sides with required EPDM rubber/ neoprine gaskets, hinges/ pivots etc. Aluminium sections shall be smooth, rust-free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P Brass/ Stainless steel screws, all complete as per architectural drawing and directions by Engineer-in-charge
Providing & fixing glazing with float glass panes of 5mm thickness (weight not less than 12.50 kg/ sqm) in Aluminium door/ window/ ventilator and partitions etc. with EPDM rubber/ neoprine gasket etc.complete as per the architectural drawing and directions by Engineer-in-charge
Providing & laying vitrified floor tiles 600mm X 600mm with water absorption less than 0.08% and conforming to IS:15622, of approved make, colour & shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm. including grouting the joints with white cement & matching pigments, etc., all complete as directed by Engineer-in-Charge.
Providing & laying ceramic anti-skid/ non-skid floor tiles of size 300 X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand) , joining with grey cement slurry @3.3 kg/ sqm including pointing the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.
Providing & laying ceramic glazed floor tiles of size 300 X 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours except burgundy, bottle green, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand) , joining with grey cement slurry @3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc.complete as per the direction by EIC, in skirting, risers of steps and dados over 12mm thick of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing the grey cement slurry @3.3 kg/ sqm including pointing the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.
Providing & laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat, the layer of membrane shall be laid using butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in Longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C, cold flexibility shall be upto -2°C, when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge.
Extra for covering top of water proof membrane with Geotextile, 120 gsm non-woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane torch as per manufacturers recommendation, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Mineral Fiber Board False ceiling with 16mm bevelled tegular mineral fiber tiles (NRC 0.55 to 0.60) at all heights of size 595 X 595 mm of approved texture, design & pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k= 0.052- 0.057 w/m K, Fire performance as per (BS 476pt- 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all around galvanized iron section of 0.33mm thick (Galvanized @ 120 gsm) comprising of main T-runners of 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600 mm x 600 mm suspended from celing using galvanized mild steel item (galvanised @80gsm), 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200mm c/c along with main "T". The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.4mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm c/c & 400mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specification, drawings and as per the directions of Engineer-in-charge
Providing & fixing 18mm thick flamed finish granite stone slab Jet black, Cherry Red, Elite Brown, Cat Eye or equivalent, in required designs & patterns, as per the architectural drawing, including fixing the slab by making necessary grooves on the wall & supports and jointing with C.M. 1:4, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing white vitreous China Wash basin size 630mm X 450mm with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the wall, wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 600 X 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing white vitreous china pedestal type (European type) water closet pan with ISI marked white solid plastic seat & lid, 10 litre low level white PVC flushing cistern including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings & fixtures complete, including cutting & making good the walls & floors, wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 100 mm SCI Trap with 100mm inlet & 75mm outlet, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing PTMT grating of 150mm rectangular type with openable circular lid (150mm nominal size square 100mm diameter of the inner hinged round grating), etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 3 layer PP-R (Poly Propelene Random copolymer) pipes (PVC pipes) confirming to IS:15801 UV Stablized & anti microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropelene random fittings, including all labour works, trenching & refilling, if any, testing etc. complete as per the direction by Engineer-in-charge ( PN-10 Pipe, 75mm OD (SDR-11)
Providing & fixing 3 layer PP-R (Poly Propelene Random copolymer) pipes (PVC pipes) confirming to IS:15801 UV Stablized & anti microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropelene random fittings, including all labour works, trenching & refilling, if any, testing etc. complete as per the direction by Engineer-in-charge ( PN-10 Pipe, 110mm OD (SDR-11)
Providing & fixing 20mm nominal dia. Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per the direction of Engineer-in-charge, concealed work, including cutting chases and making good the wall, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 25mm nominal dia. Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per the direction of Engineer-in-charge, concealed work, including cutting chases and making good the wall, etc., all complete as directed by Engineer-in-Charge.
Providing & placing on terrace (at all floor levels) polyethelene water storage tanks, 1000 litres capacity, IS:12701 marked, with cover & suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing C.P. Brass bib cock, 15mm nominal bore of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing C.P. Brass stop cock of standard design & approved make, 15mm nominal bore of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing C.P. Brass stop cock of standard design & approved make, 20mm nominal bore of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board (610mm X 510mm bowl depth 200mm), as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings & brackets, cutting & making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing CP Brass 32mm size bottle trap of approved qaulity & make, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing P.V.C. waste pipe (flexible pipe 40mm) for sink or wash basin including PVC waste fittings, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing C.P. Brass Toilet paper holder, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing PTMT Liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same material with snap fittings of approved quality and colour, weighing not less than 105gms, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing PTMT Towel rail, 600mm long with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms., complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality & colour, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 8mm dia. C.P. Brass/ S.S.Jet with flexible tube upto 1 metre long with S.S. Triangular plate for European W.C. (Health faucet) of quality make, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Gun metal Gate valve of 25 mm nominal bore with C.I. wheel of approved quality, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Gun metal Gate valve of 20 mm nominal bore with C.I. wheel of approved quality, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 25 mm nominal bore, ball valve (Brass valve) of approved quality, high or low pressure with plastic floats, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Aluminium sliding door bolts 250 X 16mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts & screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Aluminium tower bolts 200 X 10mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts & screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing Aluminium handles 125mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts & screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 125 mm bright finished brass handles with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing 100 X 85 X 5.5 mm (Heavy type) bright finished brass butt hinges with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing bright finished brass tower bolts (barrel type) 200 X 10mm with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI,IS:3564, embossed on the body, door weight from 36 kg to 80 kg and door width from 701mm to 1000mm), with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing ISI marked aluminium butt hinges 100 X 75 X 4 mm transparent or dyed to required colour or shade with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing & fixing zinc alloyed (white powder coated) touch lock for aluminium sliding windows with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Rupees Twenty Five Lakh Eleven Thousand One Hundred Seventy Four and Nineteen Paise Only
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply & fixing on the building at a height of 4-6mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building / and testing & commissioning of building light LED light fixture of wattage not exceeding 70/72watts and lumens output not less than 7700/7920 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K±5%, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. The fitting shall have internal surge protection of 4KV and external surge protection of 10KV. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:TRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply & fixing on existing MS hook 1200mm sweep, Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300/600mm length as per site requirement, necessary rubber bushings, clamps nuts, bolts etc., complete in all respects and as directed by Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
8 way (4+24) Double door TPN MCB DB
63 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity.
6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling whereever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
Supply and fixing of power point consisting of Gang of sockets 2Nos of 5/6A, 250V grade, 3pin modular type Universal flush type socket outlet & 2Nos of 5/6A, 250V grade flush type modular switch of approved colour for control with necessary interconnections complete in all respects.
Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required.
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
3 x 2.5 sq. mm (For lighting ckt from DB to Switch box)
3 x 4 sq. mm(For 6A & 16A power points)
Supply and fixing on wall using suitable fixing hardware, Cable junction boxes IP 65/66 with integrated membranes for cable entry of Hensel make (not less then 130x130x77mm) or equivalent model in Legrand/ Hager/ Schneider with cover and providing 10A 6way PVC connector inside the box as directed by Engineer -in-charge.(For building light fittings)
Telephone
Supplying and fixing of Telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply & drawing of 4 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telecommunication cables in the existing surface / recessed PVC conduit as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
2 Module
Supply & fixing of 2nos of 1 Module RJ-45 sockets for Two numbers of Data points on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.
Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25MM PVC Conduit
Earthing
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Rupees Two Lakh Thirty Three Thousand Eight Hundred Twenty Five and Seventeen Paise Only
Rupees Twenty Seven Lakh Forty Four Thousand Nine Hundred Ninety Nine and Thirty Six Paise Only
Approximate Amount Put to Tender
Rupees Four Lakh Ninety Four Thousand Ninety Nine and Eighty Eight Paise Only
Rupees Thirty Two Lakh Thirty Nine Thousand Ninety Nine and Twenty Five Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN29.pdf
TENDER_DOCUMENT • 1.33 MB
54PQ.pdf
TENDER_DOCUMENT • 0.21 MB
54ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
54Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
54Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
54PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
54PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
54TB.pdf
TENDER_DOCUMENT • 3.36 MB
54PB.pdf
TENDER_DOCUMENT • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .