Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹8.8 L+₹53,978.12 (6.56%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Abi Constructions L2 | A Thirumurthy L1 |
|---|---|---|---|---|---|
| 1.00Construction of Community Hall @ Kambukudi Village in Pungampattu Nadu Panchayat | |||||
| 2.00 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. | 142.49 | Sqm | 404.58 ₹57,648.6 Lowest | 404.58 ₹57,648.6 Lowest |
| 3.00 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) | 125.01 | Sqm | 1,932.81 ₹2,41,620.58 | 1,726.81 ₹2,15,868.52 Lowest |
| 4.00 | Cement Concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four hard broken stone jelly) using 10 to 12mm gauge hard broken granite stone jelly for Terrace flooring including water proofing Compound, laying, finishing, curing, etc. etc., complete complying with standard specification and as directed by the departmental officers | 6.27 | Sqm | 11,186.85 ₹70,141.55 Lowest | 11,186.85 ₹70,141.55 Lowest |
| 5.00 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 130.82 | Sqm | 1,393.52 ₹1,82,300.29 | 1,310.22 ₹1,71,402.98 Lowest |
| 6.00 | Supplying and painting the walls with two coats of Oil Distember over one coat of primer as instructed by the department officers including preparation of surface curing | 137.46 | Sqm | 279.98 ₹38,486.05 Lowest | 279.98 ₹38,486.05 Lowest |
| 7.00 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. | 222.24 | Sqm | 344.94 ₹76,659.47 Lowest | 344.94 ₹76,659.47 Lowest |
| 8.00 | Painting two coats over new iron works using ready mixed enamal paint including cost and conveyance of paint and all albour charghers etc acomplete | 82.68 | Sqm | 246 ₹20,339.28 | 136 ₹11,244.48 Lowest |
| 9.00 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD18) | 20 | Sqm | 1,322 ₹26,440 Lowest | 1,322 ₹26,440 Lowest |
| 10.00 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 | 15 | Sqm | 87 ₹1,305 Lowest | 87 ₹1,305 Lowest |
Tender Value
Refer Docs
EMD Value
₹17,600
Closing Date
23 Sept 2026, 3:00 pmClosed
The Block Development Officer BP
The Block Development Officer BP
Tirupathur District General Fund Block Panchayat - 2026-2027 Additional work of Community Hall at Kambukudi in Pungampattunadu Panchayat Panchayat Package No.01
2026_RDTN_702606_1
A3/5634/2025
Open Tender
Civil Works
Item Rate
180 days
Tirupathur Block
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹17,600
24 Sept 2026
9 Sept 2026
24 Sept 2026
9 Sept 2026
23 Sept 2026
9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of Community Hall @ Kambukudi Village in Pungampattu Nadu Panchayat | - | - | - | - |
| 2 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. | 142.49 | Sqm | - | - |
| 3 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) | 125.01 | Sqm | - | - |
| 4 | Cement Concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four hard broken stone jelly) using 10 to 12mm gauge hard broken granite stone jelly for Terrace flooring including water proofing Compound, laying, finishing, curing, etc. etc., complete complying with standard specification and as directed by the departmental officers | 6.27 | Sqm | - | - |
| 5 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 130.82 | Sqm | - | - |
| 6 | Supplying and painting the walls with two coats of Oil Distember over one coat of primer as instructed by the department officers including preparation of surface curing | 137.46 | Sqm | - | - |
| 7 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. | 222.24 | Sqm | - | - |
| 8 | Painting two coats over new iron works using ready mixed enamal paint including cost and conveyance of paint and all albour charghers etc acomplete | 82.68 | Sqm | - | - |
| 9 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD18) | 20 | Sqm | - | - |
| 10 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 | 15 | Sqm | - | - |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
Tendernotice_2.pdf
PDF • 0.80 MB
BOQ_844645.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .