SINKING 1 NO OF BOREWELL PROVIDING MOTOR PIPELINE AND CONSTRUCTION OF CISTERN AT MAMS KUKANOOR TOWN IN KUKANOOR TALUKA UNDER 2024-25 MINORITY DEPARTMENT

SINKING OF BOREWELL

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Geophysical investigation at site for sinking borewells for Providing

drinking water to the habitation either through the Hand Pump MWS

or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness

of plate used for covering one end shall be 3mm (minimum)....

PUMPING MACHINERY

Providing Submersible Pump Set of 150mm dia suitable for bore well and

confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt

Motor as per specifications, to work site as per necessary am...

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments.1x3x2.5 ...

Supply and delivery at site of brand new best make pressure gauge

bourdon type as per IS 778/1984 with ISI Mark and as per its latest

amendments.Size 63 mm

Supply and delivery at site of brand new best make gate valve as per IS

778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make non-return valve as

per IS 778/1984 with ISI Mark and as per its latest amendments

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog

Supply and delivery at site best indigenous brand new power capacitor as

per IS 2834/1986 with latest amendments with KPTCL authorities and

erection, electrification and commissioning of the same at t...

Supply and delivery of galvanized mild steel tubes of 6mtr standard

length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest

amendments with ISI Mark (one end fitted with Heavy Duty collar...

Providing main connection from pole PVC insulated sheathed steel wire

cable in new trench as per IS 1554/ 1988 with latest amendments with

ISI mark from KPTCL pole to meter board unit.

Labour charges for Erection, Electrification and commissioning of Pump

sets, including aligning and balancing of all items including supply and

erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of outdoor type panel board and meter board

units with all necessary materials and labour, tools and equipments

including providing cement concrete foundation bed etc., com...

Labour charges for providing connection using insulated sheathed

steel wire cable as per IS 1554/ 1988 with latest amendments from

KPTCL pole to meter board unit, with all necessary materials ,tools a...

Earthing: Providing and fixing and wiring earth electrode for grounding

circuits IC cutouts and other equipments on the meter board in the pit.

The pits should be filled up with equal proportion of sa...

Supply and delivery at site wrought middle steel (galvanized) GI union

confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI Union

Supply and delivery at site wrought middle steel (galvanized) GI bend

confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI BEND

CONSTRUCTION OF CISTERN

Earth work excavation by manual means for drains,canals, waste weir draft,

approach channels, key trench, foundation of Bridges and such similar works,

as per drawing and technical specifications, inc...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Erection and positioning of RCC Hume pipe pump house/Cistern on

size stone masory platform including transportation charges and

handling,finishing with all necessary tools ,plants and materials

RCC hume pipe Circular pump house: Providing precast RCC Circular

Hume pipe pump house with M.S door and RCC conical roof as per

specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990

with latest amendments complete with GI fittings (excluding the cost

of fittings) with cuts and threads wherever necessary, includin...

Heavy Duty GI pipe of 20mm dia

Providing and fixing GI union in existing GI pipe line, cutting and

threading the pipe and making long screws including excavation, refilling

the earth or cutting of wall and making good the same comp...

Supply and delivery at site wrought middle steel (galvanized) GI elbow

confirming to IS 1239-II, 1991 with latest amendments if any for For 50 mm dia GI elbow

Supply and delivery at site GM (copper alloy) gate valves confirming to

Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet

inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site special moulded variety PVC reducer as per

IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with

its latest amendments

Providing wrought mild steel (galvanized) GI collar confirming to IS

1239-II, 1991 with latest amendments if any

Providing and fixing brass stop cock of approved quality :20 mm nominal bore

Earth work excavation for pipelines/cables by Manual means upto 600 mm

trench width, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution lights...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...