IMPROVEMENT OF WATER SUPPLY INFRASTRUCTURE AT AF STATION AGRA

Amount

SCHEDULE A PART I (BUILDING WORKS)

Lump sum price worked out by the contractor for Construction of PUMP HOUSE buildings (02 BLDGS), UG SUMP (1.00 LAKH AND 1.67 LAKH CAPACITY), SUCTION TANK AND RCC OVERHEAD RESERVOIR (CAPACITY 1.00 LAKH GALLON) listed in Schedule ‘A’ Part I.

SCHEDULE A PART II (INTERNAL WATER SUPPLY)

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Sch ‘A’ Part II.

SCHEDULE A PART III (INTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Sch ‘A’ Part III.

SCHEDULE A PART IV (ROAD, PATH & CULVERT)

Lump sum price worked out by the contractor for ROAD, PATH & CULVERT as listed in Schedule ‘A’ Part IV.

SCHEDULE A PART V (EXT WATER SUPPLY)

Lump sum price worked out by the contractor for EXT WATER SUPPLY as listed in Schedule ‘A’ Part V.

SCHEDULE A PART VI (EXTERNAL ELECTRIC SUPPLY)

Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part VI.

SCHEDULE A PART VII (SEWAGE DISPOSAL)

Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part VII.

SCHEDULE A PART VIII (AREA DRAINAGE)

Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part VIII.

SCHEDULE A PART IX (SECURITY WALL, GATE & FENCING)

Lump sum price worked out by the contractor for SECURITY WALL, GATE & FENCING as listed in Schedule ‘A’ Part IX.

SCHEDULE A PART X (SITE CLEARANCE ,EARTHWORK & EXCAVATION )

Lump sum price worked out by the contractor for SITE CLEARANCE , EARTHWORK & EXCAVATION as listed in Schedule ‘A’ Part X.

Schedule A Part -XI (Miscellaneous Items of B&R and E&M (to be quoted by the tenderer in BOQ)

Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab, reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 5 users complete all as specified and shown on drawings. (Ref drg no TD/217)

Construction of Soakage well excavation in ordinary soil, foundation in PCC 1:3:6, walls of wells of honey combed and solid brick work in CM (1:4), RCC slab covers, soakage well filling with brick bats inside complete of size 1.20 mtr dia and 1.5 mtr effective deep. (Ref drg no TD/576)

Supply & Fixing of CONSEC ZAL super razor punched barb tape (SRPBT) Aluminium base helix coil with and including necessary GI fixing clips for securing concertina coil 800 mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint making complete all as specified and as directed with following specification:- (i) Dia of coil (unstretched) - 800 mm (ii) No circles - 51 turns per coil (iii) Strech of each coil - 8 RM (iv) Central core wire - made from 3.15 mm dia GI - H.T.S.S wire as per IS : 4454 galvanised as per IS : 2629 (v) Razor PUNCHED STRIP Razor punched tape is CONSEC -ZAL steel comprising of aluminium base with Zinc alloy @ 150 gm/Sqm comfirming to ASTM A -792/12-792M with additional primer treatment of Epoxy/POLYRETHANE & final print top coat of caulified green shade (BSL 139) by Hot dipping process.

Supply & Fixing LED Street Light (Bldg Security Light) Fittings having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 20 Watt complete with 32 mm bore light grade GI pipe bracket having length 1.5m long duly bent to required shape including Mild steel Flat iron (40mmx3mm) clamps two numbers, Anchor Bolts, nuts, washers etc and duly fixed on walls complete all as specified and as directed. Make : Philips Cat Part No : BRP022 LED 20 CW MR S1 PSU GR) / Havells Cat No. : ENDURAPEARLSL20WLED757SASYTOPCMP) or Crompton Cat No: LSTS-20-CDL-M)

Supply, laid, jointing & testing of 450 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, laid, jointing & testing of 300 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, laid, jointing & testing of 250 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, laid, jointing & testing of 200 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, laid, jointing & testing of 150 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, laid, jointing & testing of 100 mm dia Ductile Iron pipes of Class "K-9", Single socketed including its specials/ fittings laid in trenches complete all as specified & directed.

Supply, fixing and testing 450 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 300 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 250 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 200 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 150 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 100 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply, fixing and testing 80 mm bore Sluice valve cast Iron body of class PN 1.6, ISI marked, flanged type with stainless steel spindle & Check nut and Iron wheel head complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and directed.

Supply & Fixing cast iron Air Release Valves 250 mm bore with two air outlets (combination Valve) confirming to IS : 14845 suitable for DI Pipe including air outlet pipe size 50 mm bore duly fixed in DI pipe line by providing necessary hardware materials as required at site complete all as specified and as directed.

Supply & Fixing cast iron Air Release Valves 250 mm bore with one air outlets (combination Valve) confirming to IS : 14845 suitable for DI Pipe including air outlet pipe size 50 mm bore duly fixed in DI pipe line by providing necessary hardware materials as required at site complete all as specified and as directed.

Supply & Fixing Cast Iron Non Return Valve 80 mm dia, Horizontal type with by-pass arrangement complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and as directed.

Supply & Fixing Cast Iron Non Return Valve 100 mm dia, Horizontal type with by-pass arrangement complete with Rubber gasket of suitable thickness, MS Bolts, nuts and washers of suitable size complete all as specified and as directed.

Supply & Fixing Cast Iron Foot Valve 200 mm bore, vertical type, confirming to IS : 4038, duly fixed by providing necessary hardware materials as required at site complete all as specified and as directed.

Material & Labour for brick masonry valve pit chamber, 150 mm thick PCC 1:4:8 in foundation, 230 mm thick brick walls built in CM 1:6, PCC 1:3:6 type C-1 using 20mm graded stone aggregate coping 50mm thick, plastering 15mm thick in CM 1:4 to all internal and exposed surface including necessary excavation and earth work in hard / dense soil, MS sheet cover 3.15mm thick alongwith angle iron frame of size 40x40x6mm with locking arrangement with necessary fixing materials like hinges, but bolts etc (Valve chamber cover shall be opended in two halves) and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

a) 900x900x900mm (internal dimensions)

b) 600x600x600mm (internal dimension)

Boring of holes under roads / path or pavement hard standing by trenchless technology using ultra sound technique and necessary machine including 150 mm dia HDPE pipe in trench suitable for 0.4mpa working pressure complete including all necessary T&P required complete all as specified & directed.

Boring of holes under roads / path or pavement hard standing by trenchless technology using ultra sound technique and necessary machine including 300 mm dia HDPE pipe in trench suitable for 0.4mpa working pressure complete including all necessary T&P required complete all as specified & directed.

Supply, Fixing, testing & commissionning of Monoblock centrifugal pump set suitable for operation with 3 Phase, 415 Volt AC 50 Hz supply and having Ingress protection level IP-55, Class of insulation 'F', ISI Marked complete with bronze impeller, Stainless Steel shaft and all necessary hardware and pipe fittings / gasket. The pump set shall be duly fixed on rubber mountings pads and making necessary electrical / earthing connection complete suitable to meet the following parameters :- a) Operating Head : 21 Mtr b) Discharge : 47 LPS c) Capacity : 30 HP d) Suction : 100mm e) Delivery : 80 mm f) Rated RPM : 1450 Make : Kirloskar Brothers Limited (Model : KDS 3068+) or Equivallent model of KSB or CROMPTON Note : Electrical cables and earth lead conductors shall be measured and paid separately under respective items in the schedule of External Electrification works.

Supply, Fixing, testing & commissionning of Open well type Submersible pump sets suitable for operation with 3 Phase, 415 Volt AC 50 Hz supply and having Ingress Protection Level IP-68, Class of insulation 'B', ISI Marked complete with bronze impeller, Stainless Steel shaft and all necessary hardware and pipe fittings / gasket and duly fixed on rubber mountings pads and making necessary electrical connection complete suitable to meet the following parameters :- a) Operating Head : 10 - 12 Mtr b) Discharge : 18.5 - 18 LPS c) Approximate Capacity : 15 HP d) Rated RPM : 2880 - 2900 (e) Suction 100 mm & Dilivery 80 mm Make : KIRLOSKAR / KSB / CROMPTON Note : Electrical cables shall be measured and paid separately under respective items as mentioned in the Schedule of External Electrification works.

Supply & Fixing 100 mm dia Dial type Water Pressure Guage (glycerene Filled) suitable for line pressure of 10 Kg/Sqcm complete with necessary adopter etc. Make : FIEBIG / K-GURU / RMCO

Supply & Fixing Cast Iron Ventury Tube of 250 mm dia, both end flanged (4 Nos injecting points duly screwed at the centre) rigidly fixed with the CI / DI pipe line complete including provision of rubber gasket, bolts, nuts etc for injecting liquid chlorine in the pipe line complete all as specified and as directed. Make : RMCO / Kartar / Venus / Upadhyay

Supply & Fixing Cast Iron Ventury Tube of 150 mm dia, both end flanged (4 Nos injecting points duly screwed at the centre) rigidly fixed with the CI / DI pipe line complete including provision of rubber gasket, bolts, nuts etc for injecting liquid chlorine in the pipe line complete all as specified and as directed. Make : RMCO / Kartar / Venus / Upadhyay

Supply & laying sub class 'B' bricks in cable trenches as cable protection complete all as specified and directed.

Supply & Fixing Galvanized steel octagonal pole 7 RM long made of 3mm thick hot dip galvanized (thickness 65-70 microns) steel sheet (Conforming to grade S355JO) of bottom dia 130mm / 135mm & top dia 70mm and galvanized steel base plate (Fe-410 conforming to IS : 226 or IS : 2062) of size 200mmx200mmx12mm complete with flush mounted lockable hinged door 500mm long and positioned at 500mm above the base plate & mounting plate for fixing of connector, MCB etc for connection of loop in / loop out cables. The pole shall be duly fixed on RCC foundation (500mm x 500mm x 1550mm duly reinforced with 4 Nos 12mm dia steel TMT bars of grade Fe-415 and 8 Nos MS Stirrups made with 8mm dia MS round bar and including provision of necessary form work / shuttering required) by using 4 Nos 'J' type foundation bolts of dia 20mm x 600mm long (EN-8 Grade) complete including 2 Nos 1.5 mtr long 63mm dia PVC flexible pipe, duly embaded in concrete foundation, for cable entry & exit and hot dip galvanized steel street light bracket having 300mm long at pole top cover of suitable dia made of 3mm thick hot dip galvanized steel sheet and hot dip galvanized arm (1000mm long) made of 32mm dia light grade MS pipe duly welded with the pole cap with stiffner plate and provision of 1 No 30 Amp 4 way bolted type FRP / DMC cable connector and 1 No. MCB SP 3 Amps duly mounted on the mounting plate / DIN channel complete all as specified and as shown in drawing. Make : BAJAJ / CROMPTON / PHILIPS

Supply & fixing LED street light 30 Watt with Ingress Protection level IP-66 (Min) including necessary electric connection to fittings fron the street light connector complete all as specified and directed. Make of Luminaire : PHILIPS (Cat No : BRP046 LED 30 CW MR S1 PSU GR) / HAVELLS (Cat No : ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC) / CROMPTON (Cat No : LSTS-30-CDL-M) / BAJAJ (Cat No : BRLEP 30W LED WH)

Supply & Fixing PVC insulated, sheathed Copper wire of size 3 core 1.5 Sqmm duly passing through the holes of existing steel pole / street light brakets including necessary connection from the MCB at pole mounted street light junction box and also at the street light fittings complete all as specified and as directed.

Supply, Design, erection, testing & commissioning of Indoor type Pump Control Panel of overall size not less than 2100mm width x 1400mm Height x 400mm Depth, MS Channel Base Frame mounted (to be mounted on the 3 side covered brick pedestal of height 400mm above floor level) suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 200 Amps, including Provision of Spreader link to incoming / outgoing side of MCCBs for termination of cables / busbars and FRP / DMC Cable connectors for termination of outgoing cables from pump starters / MCBs. The Panel shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of panel boards and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL-7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust & vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The panel board shall be made out of 2mm thick CRCA mild steel sheet and 2mm thick gland plate and having compartmentalized construction for individual switch gears / Pump Starters and Bus Bars and having front and rear opening facility and detatchable type mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt, panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. All the cables entry / exit from the bottom of cable alley only. The panel shall be comprising of the followings :- a) Incomer MCCB 4 Pole, 100 Amps, 16 KA with rotary handle (adjustable thermal 100% - 80% - 01 No. (as Incomer) of Make : LEGRAND / L&T / SCHNEIDER) b) Outgoing MCB TPN 40 Amps, 10 KA, 'C' Series - 04 Nos. (Pump Starter) of Make : LEGRAND / L&T / SCHNEIDER)

Supply, Design, erection, testing & commissioning of Indoor type Pump Control Panel of overall size not less than 1300mm width x 1700mm Height x 400mm Depth, MS Channel Base Frame mounted (to be mounted on the 3 side covered brick pedestal of height 400mm above floor level) suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 200 Amps, including Provision of Spreader link to incoming / outgoing side of MCCBs for termination of cables / busbars and FRP / DMC Cable connectors for termination of outgoing cables from pump starters / MCBs. The Panel shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of panel boards and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL-7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust & vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 2mm thick CRCA mild steel sheet and 2mm thick gland plate and having compartmentalized construction for individual switchgears / Pump Starters and Bus Bars and having front and rear opening facility and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt, panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. All the cables entry / exit from the bottom of cable alley only. The panel shall be comprising of the followings :- a) Incomer MCCB 4 Pole, 100 Amps, 16 KA with rotary handle (adjustable thermal 100% - 80% - 01 No. (as Incomer) of Make : LEGRAND / L&T / SCHNEIDER) b) Outgoing MCB TPN 63 Amps, 10 KA, 'C' Series - 02 Nos. (Pump Starter) of Make : LEGRAND / L&T / SCHNEIDER)

Supply & Fixing PVC Insulated Round / Flat PVC sheathed copper cable of 16 Sqmm 3 core with stranded copper wire laid in ducts complete all as specified & directed. (For Pump Starter Panel to 30 HP Booster Pump)

Supply & Fixing PVC Insulated Round / Flat PVC sheathed copper cable of 10 Sqmm 3 core with stranded copper wire laid in ducts complete all as specified & directed. (For Pump Starter Panel to 15 HP Booster Pump)

Supply, Installation, Testing & commissioning of a Silent Diesel Generating Set (Confirming to CPCB-II Norms) comprising of Water Cooled Diesel Engine (As Per IS : 10001 / 10002) (Prime Continuous Rating as per ISO 8528-1) and Alternator (As per IS : 13364) to deliver 415 volts, 3 Phase, 50 Hz supply to generate power of 50 KVA (at 0.8 PF lag) with permissable voltage Dip is less than 20% at full load and efficiency is not less than 93% at full load. DG Set shall be mounted on anti-vibration pad duly fixed on a common MS base frame complete with standard fuel tank, Standard Control Panel & Acoustic Enclosure (To maintain the noise level less than 75 dBA @ 1 RM distance and insulation class of flamability conform to UL94-HF1) and Microprossor based govorner controlling system with LCD Display complete mounting with PCC (1:2:4 Type B-1 using 20 mm crushed stoen aggregate in foundation as per OEM's instruction / drawing (as applicable) complete all as specified and as directed. Make of Engine : CUMMINS / Caterpillar / Greaves Cotton Ltd Make of Alternator : STAMFORD / Leroy Somer / Crompton Greaves Ltd Make of Acoustic Enclosure : JAKSON / SUDHIR / POWERICA / CATERPILLAR / GREAVES POWER Make of Standard Control Panel : To be manufactured and supplied by the OEM as per their specification.

Note : a) Necessary arrangement for cable work and earthing work shall be measured and paid separately under respective items catered in Schedule of External Electric Supply work. b) Pre-Commissioning Test of DG Set shall have to be carried out as per the condition mentioned / given in Particular Specification. The test shall have to be carried out in presence of IEM of CE(AF) Allahabad or any other officer as detailed by Accepting Officer. The expenditure for testing (including cost of fuel / Artificial Load, connecting cables etc) shall have to be borne by the contractor and which shall deemed to be included in the unit rate quoted. No extra amount shall be paid for this account. c) The contractor shall have to be arrange for Inspection of item at OEM's factory premises. On intimation of readiness of item, one testing officer shall be nominated by the Accepting Officer before dispatch of material. After necessaty inspection at OEM's factory premises, the item shall be dispatched from factory only after satisfactory performance of the machine duly certified by the inspecting officer.

Supply, Installation, Testing & Commissioning of Aluminium Air Termination rod 12mm dia 300mm long duly mounted on an polymer post insulator rigidly fixed on a 1.5 RM long 40mm bore medium grade GI Pipe with GI flange at bottom for fixing on the roof top of RCC OH Tank by anchor bolts etc and duly fixed with 4mm dia GI stay wire to with stand the wind pressure complete all as specified and as directed.

Supply & Fixing Down conductor for Lightning Protection system made with 25mm x 3mm Aluminium strip duly mounted on the DMC / FRP bridge insulators and rigidly fixed the GI Pipe / concrete surface of the dome / column etc of RCC Over Head tank / reserevoir complete all as specified and as directed.

Supply & Fixing Integral LED Aviation Obstruction Light of capacity 10-24 Watt, suitable for 240 Volts AC 50 Hz supply with operating input voltage 100-270Volt AC complete with short circuit and surge voltage protection and having ingress protection class IP-65 (Min) comprising with aluminium housing with polycarbonate enclosure and having LED not less than 300 Nos rigidly mounted on a 300mm long GI Pipe of suitable diameter fixed on a GI Flange duly fixed on the roof of OH Tank with anchor bolt all as specified and as directed. (For R.C.C. Over Head Tank) Make : BAJAJ (Cat No. BGAV 302 LED) or Equivallent Model in MICOLUX / MATADOR

Material & Labour for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 RM deep below ground level with top edge of the plate not less than 1.5 RM below ground level connected to glavanised iron Wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including 15 mm dia GI tubing medium grade and necessary fitting for protection of GI wire including laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm crushed stone aggregate, RCC cover 40mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate, reinforced with 8 mm dia TMT spacing @ 75mm centre to centre on both ways with MS handle 8mm dia, plastering 15mm thick in CM 1:6 externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh including excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No. 3 of SSR Part I (2009) and connected to earth test point including testing and marking Bldg Nos and writing Test Results on a 3mm thick painted MS earth pit marking Plate (200mm x 200mm) duly welded with a 450mm long 10mm dia round MS rod, fixed with the earth pit chamber by grouting complete all as specified an directed.

Material & Labour for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 RM deep below ground level with top edge of the plate not less than 1.5 RM below ground level connected to glavanised GI strips 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including 40 mm dia GI tubing medium grade and necessary fitting for protection of GI strips including laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm crushed stone aggregate, RCC cover 40mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate, reinforced with 8 mm dia TMT spacing @ 75mm centre to centre on both ways with MS handle 8mm dia, plastering 15mm thick in CM 1:6 externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh including excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No. 3 of SSR Part I (2009) and connected to earth test point including testing and marking Bldg Nos and writing Test Results on a 3mm thick painted MS earth pit marking Plate (200mm x 200mm) duly welded with a 450mm long 10mm dia round MS rod, fixed with the earth pit chamber by grouting complete all as specified an directed.

Supply, Install testing and commisioning smart water level controller with sensor integration via screw terminals with the on-field configuration for providing the option for underground sump and overhead tank each. Indication for 5 sensor reading per tank (0%, 25%, 50%, 75% & 100%) display interface with 4.3 TFT LCD screen with 32 bit microcontroller unit, fixed resolution 480 x 720 pixels . Operating temprature for device -20 to 70 degree celcius . The controller must support I/O based controls over 8 bit 8051 Base Mirocontroller unit with support for Buzzer/ Alarm at 25% and 100% capacity to operate On/Off operations. Manual override option to override the controls from Auto mode. The enclosure is made of ABS materials for IP protection. (Dust and water resistant) Make:- Sathya Sai/ Matrix International/ System Solution India Pvt Ltd.

S&F Horizontal magnetic float switch with SS pipe made out of stainless steel grade SS304 for sensor mounting(5 % Nos Sensor)

S&F copper cable of size 0.16 Sqmm 7 core heavy duty cable with wheather proof rubber coating all as specified and directed.