Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.1 LAccepted-AOC H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹64.1 L+₹98,098.50 (1.55%)Rejected-Finance 112 AMBALA ROAD NARAINGARH AMBALA 134203 | NARAINGARH | AMBALA | HARYANA | 134203 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹64.3 L+₹1.1 L (1.80%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹68.6 L+₹5.5 L (8.67%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹69.1 L+₹6.0 L (9.48%)Rejected-Finance H NO 82C BLOCK CC SHALIMAR BAGH DELHI 110088 | DELHI | NORTH WEST DELHI | DELHI | 110088 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹89.5 L
EMD Value
₹1.6 L
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NEW DELHI, DELHI CANTT
HQ CWE NEW DELHI, RAO TULA RAM MARG, DELHI CANTT 10
SPL REPAIR OF BLDG No. P-3 (ROOM NO. 117 TO 128) AT SHANKAR VIHAR UNDER GE (SOUTH ) DELHI CANTT-10
2023_MES_576326_1
CWE-ND-42-2022-23
Open Tender
Miscellaneous Works
Item Rate
120 days
DELHI CANTT
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹1,000
GE SOUTH
₹1.6 L
Yes
27 Apr 2023
20 Jan 2023
9 Mar 2023
20 Jan 2023
7 Mar 2023
18 Feb 2023
Amount
Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed.
Taking down door/window/ventilator's chowkhat or frame with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified & directed..
S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mould plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and bottom rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing & as directed.
S&F solid coloured PVC doors frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge as per specification & drg in SSR & as directed..
M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of minimum density 600Kg/Cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitred cut at two corners and jointed with 02 Nos. of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos. of screw to be provided horizontal member etc. complete all as specified and directed.
M&L for factory made PVC flush type shutter of 18mm thickness consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm mitred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of minimum density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The edges of the shutter shall be lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc. including necessary fittings, locking and fixing arrangement i.e. piano hinges, locking and fixing arrangement etc. complete all as specified and directed and as per manufacturer's specification and drawing and directed.
S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and directed.
S&F 75 mm size butt hinges medium weight stainless steel complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .
S&F Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed complete all as specified and directed.
S&F repair aluminium handles , 150 mm size, Fabricated type ,complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed complete all as specified and directed.
S&F door closer aluminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F 6mm dia powder coated aluminium deco grill, (minimum thickness of powder coating 50 micron), section No. -104, 100mm aperture of hexagonal design and pattern as approved complete all as specified and directed.
S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and directed.
S&F powder coated aluminium frame for partitions, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for Aluminium anodised with powder coated door with shutter, chowkhat/frame made with aluminium section of size 100 x 44x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2mm thick and top/middle/bottom rail of shutter with sections 112 x 44x2 mm thick including 5 mm thick tinted glass panes inserted including necessary fixing arrangement, jointing cleats, glazing clips, rubber packing aluminium anodised beading, screw sets, floor stoppers, hinges, tower bolts 200mm size, mortice lock 100mm size 4 lever, round handles etc., fitted to shutter and frames fixed in position including hold fast and match the existing surfaces complete all as specified and directed.
S & F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket in square exc 0.5 Sqm in each pane complete all as specified and directed.
S & F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket in square n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and directed.
S&F fabricated aluminum window/ Ventilators with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc. including jointing cleats for fixing builder's hardware fittings & 4mm glass or stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminum snap beads complete all as specified and directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass/ SS wire mesh and all fittings/ fixtures deemed to be included in the above quoted rates and no extra shall be paid.
M&L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter Skelton covering half of span of opening ) including provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be including in the above quoted rates and no extra shall be paid.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.
M&L for non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 300X200X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor etc. complete all as specified and directed.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for edge moulding to 18-20 mm thick Granite stone any description of counters vanities etc., including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.
M & L for 15 mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed .
M&L for 10 mm thick rendering on brick/concrete surfaces in cement mortar (1:4) (as screeds in back of tiles) in dado complete all as specified and as directed .
Demolition of RCC other than ground floor i.e. beams , water tank, staircases , landing chajjas and similar suspended work complete all as specified and as directed .
M&L for RCC 1:2: 4 type B1 (using 20 mm graded stone aggregate) as in Slabs supported on walls landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.
M&L for RCC 1:2: 4 type B1 (using 20 mm graded stone aggregate) as in chajjas up to 6-8m height complete all as specified and directed.
S&F for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Fe- 410-W (Gde E- 250). completed all as specified and directed
M&L for use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed .
M&L for use & waste of formwork to chajja through and similar items including edges complete all as specified and as directed.
M & L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height up to 2 storey bldgs. including finishes as existing complete all as specified & directed .
M & L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50 mm, total thickness of gunite exc. 25mm but n.exc 40mm (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height up to 2 storey bldgs. including finishes as existing complete all as specified & directed
Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc. on walls and ceiling complete all as specified & directed .
M&L 12 mm thick rendering with ready mix plaster ( as manufacturer's instructions ) on internal faces of bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed .
M&L 15 mm thick rendering with ready mix plaster ( as manufacturer's instructions ) on external faces of bricks or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed .
M&L 10mm thick rendering on ceiling with ready mix plaster ( as manufacturer's instructions ) on bricks or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed .
M&L for preparation of new wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) complete all as specified and directed.
M&L for complete removal of existing treatment of old treated surface and applying two coats of distemper oil emulsion over & including a coat of water based primer & a coat of wall care putty to achieve uniform, even & smooth surface complete all as specified and directed.
M/L applying two coats of cement base paint, white or tinted on old wall plastered surface including preparation of surface complete all as specified and directed.
M& L for of new plastered surface and applying two coats of distemper oil emulsion over & including a coat of water based primer & a coat of wall care putty to achieve uniform, even & smooth surface complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.
M&L for preparing of new surfaces of ceiling and applying two coat of distemper oil emulsion over & including a coat of water based primer complete all as specified and directed.
S&F counter sunk vitreous china wash hand basin 1st quality, of size 550x400x140mm , ivory, including waste coupling including taking down old WHB any type complete all as specified and directed.
S&F in repair 1st quality Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with & including Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.
Dismantling of floor of WC with WC seat & taken out the cinder from sunken portion of WC, taking down of cement plaster of any thickness & description of wall & floor M&L for 25mmdia GI pipe spout projecting at least 150mm beyond outer face of wall ,15mm thick plaster 1:4 in cement mortar with WPC(as per manufacturer's instructions) both on floor& wall, then apply Epoxy Resin Coating polymer(water proofing coating for sunken portion )both on floor as well on wall, Sunken portion filled with graded cinder & laid 50mm thick floor in PCC 1:2:4 (using 20mm graded stone aggregate) floor area not exc. 3.50 Sqm complete all as specified and directed.
S & F in repair 1st quality vitreous china wash down water closet pan EWC (pedestal pattern ) p or s type including fixing bolts (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.
S&F in repair ,15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connection for 15 mm bore pipe, 450mm long complete all as specified and directed.
S&F in repair 32/ 40 mm bore and 75 long PVC Waste pipe suitable for WHB /Sink/ urinal complete all as specified and directed .
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair, PVC valve less , syphonic action type flushing cisterns 10 liters capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level complete all as specified and directed.
S&F in repairs 15mm brass chromium plated bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed .
S&F in repair 15 mm brass angle stop valves (fancy type), cast copper alloy , chromium plated, screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed.
S&F in repair brass Stop valves 15 mm bore fancy type, CP with long shank & cup (concealed type), cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S& F in repairs grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.
S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 metre long SS braided rubber hose pipe complete all as specified and directed.
S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs with all fittings complete all as specified and directed.
S&F glass shelf 8-10 mm thick 300X200 with F type brackets complete all as specified and directed.
S&F in repairs CP Urinal spreaders for 15 mm bore pipe complete all as specified and directed.
S&F Aluminium alloy door seal having rubber strips in bottom, fixed to door size complete all as specified and directed.
S&F one piece EWC with seat cover and twin flush cruiser snow white colour size 710x390x790mm Strap including all fitting complete all as specified and directed.
S&F table top wash basin of size 650x380x110mm snow white colour including all fittings complete all as specified and directed.
S&F waste coupling with ceramic pop-up full thread 32mm for WHB complete all as specified and directed.
S&F Brass chromium plated bottle trap of size 32 mm dia for WHB complete all as specified and directed.
S&F angle cock fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed.
S&F CP pillar cock mixer long body for counter top wash basin single lever with all fittings and fixed to 15mm bore pipe complete all as specified and directed.
S&F CP Bib cock with wall flange and single knobs with all fittings and fixed to 15mm bore pipe complete all as specified and directed.
S&F 15 mm CP Bib cock 2 way with wall flange and single knob with all fittings complete all as specified and directed
S&F Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified.
S&F stainless steel Soap dish complete all as specified and directed.
S&F wall mounted brass & glassLiquid Soap dispenser 0.50 Ltr capacity complete all as specified and directed.
S & F stainless steel toilet paper holder box type complete all as specified and directed.
S&F stainless steel Towel rack 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F stainless steel Towel rail 450mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3, cutting not exc 10 cm in girth in brick wall complete all as specified and directed .
Taking up or down steel tubing 15 mm bore and connection complete all as specified and as directed .
Taking up or down steel tubing 20 mm bore and connection complete all as specified and as directed .
Taking up or down steel tubing 40mm bore and connection complete all as specified and directed.
S&F 20 mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings concealed in walls/ceiling or laying in floors complete all as specified complete all as specified and directed.
S&F 25 mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings fixed on walls/ceiling with saddles/clamp or laying in floors complete all as specified complete all as specified and directed.
S&F 40mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings fixed on walls/ceiling with saddles/clamp or laying in floors complete all as specified
S&F 40mm outer dia CPVC Union complete all as specified and directed
S&F 25mm outer dia CPVC Union complete all as specified and directed
S&F 20mm outer dia CPVC Union complete all as specified and directed.
S&F 40mm outer dia CPVC Tank Adaptor complete all as specified and directed
S&F 25mm outer dia CPVC Tank Adaptor complete all as specified and directed
S&F 20mm outer dia CPVC Tank Adaptor complete all as specified and directed
S&F 40mm outer dia CPVC ball valve/gate valve complete all as specified and directed
S&F 25mm outer dia CPVC ball valve/gate valve complete all as specified and directed
S&F 20mm outer dia CPVC ball valve/gate valve complete all as specified and directed
S&F 20mm outer dia CPVC Brass Elbow complete all as specified and directed
S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/MBTA) complete all as specified and directed
S&F 25mm outer dia CPVC Male Brass Threaded Adapter (MTA/MBTA) complete all as specified and directed
S&F 20mm outer dia CPVC Brass Tee complete all as specified and directed
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 20 cm girth on brick wall complete all as specified and directed
Taking down 100 mm bore cast iron pipes including fittings by burning out lead joints etc. to facilitate dismantling old serviceable fittings/pipes laid in trenches, floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and directed
Taking down 75 mm bore cast iron pipes including fittings by burning out lead joints etc. to facilitate dismantling old serviceable fittings/pipes laid in trenches, floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and directed
S&F 100 mm bore cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good disturbed surface to match with existing surfaces complete all as specified & directed
S&F 75 mm bore cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good disturbed surface to match with existing surfaces complete all as specified & directed
S&F in repair, 100 mm bore cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
S&F in repair, 75 mm bore cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers (larger bore measured) of 100 mm dia fitted with oval access door complete all as specified & directed
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers (larger bore measured) of 75 mm dia fitted without oval access door complete all as specified & directed.
S & F in repairs Cast iron Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified & directed.
S & F in repairs Cast iron Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified & directed.
S & F 100 mm cast iron sanitary connections-short connections pipe of length up to 300 mm complete all as specified & directed.
S & F Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S & F Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
Extra overcast iron pipe and fittings for lead joints on provided in lieu of cement joints for 100 mm dia CI Pipes complete all as specified and directed
Extra overcast iron pipe and fittings for lead joints on provided in lieu of cement joints for 75 mm dia CI Pipes complete all as specified and directed
S&F in repair PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete all as specified & directed.
S&F in repairs PVC(SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .
S&F in repair PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed .
S&F in repair PVC(SWR) bends any radius, with threaded type access door of 110mm bore size complete all as specified and directed .
S&F in repair PVC(SWR) bends any radius, of 75mm bore size complete all as specified and directed .
S&F PVC(SWR) bends any radius, with threaded type access door of 75mm bore size complete all as specified and directed .
Dismantling water tanks exc 500 but n.exc 1000 Liters capacity complete all as specified and directed .
S&F rotational moulded HDPE water storage tanks 1000 Litre capacity triple layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.
S&F in repairs 20 mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified as directed..
S&F gun metal globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed .
S&F gun metal globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed .
S&F galvanised iron tank nipple 15mm bore suitable for HDPE water tank complete all as specified as directed.
Demolition of brick work built in CM including quoins, arches, pillars etc. complete all as specified as directed.
M&L brick work in cement mortar (1:6) using sub class 'B' bricks old sized, straight or curved on plan exc 6 mtr mean radius complete all as specified as directed.
Demolition of existing brick tiles or terracing tiles, single layer on roofs, bedded, jointed and pointed in any mortar including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of two storied block complete all as specified as directed.
Demolition of lime concrete/ Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only or part thereof) complete all as specified as directed.
M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified as directed.
M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as on roof padding to maintain the slope, complete all as specified and directed.
M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with liquid water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed Note:- Liquid water proofing compound shall be measured and paid separately
Supply only liquid water proofing compound Complete all as specified and directed
M&L for priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Liters/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free of the moment till the primer is impregnated and the solvent oil in primer is evaporated (b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 85/25 confirming to IS-73 (Grade S-35). (c) Laying minimum 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 kg/Sqm, black finish reinforced with non woven polyester matt(not less than 150gm/Sqm), with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface. (d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.
M&L for preparation of new surface of APP membrane sheet and applying two coats of aluminium paint complete all as specified and directed
M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed
M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, roof kerbs and similar work rounded or chamfered complete all as specified and directed
Dismantling of ceiling board/false ceiling/wall paneling any Size and thickness all as specified and directed.
S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel sunk screws, aluminium perimeter angles fixed to wall/wooden frame at center to center and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m center to center fixed to steel trussed roof complete all as specified and as directed.
M&L for 4mm thick non asbestos fibre cement building boards (E-boards) fixed or laid/inserted to aluminium frame work with screw in ceiling complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed
M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) for plinth protection etc. complete all as specified and directed.
M&L for coloured Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc. with grey cement and pigment (Coloured Tiles) complete all as specified and as directed
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed
M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 , 60 mm thick , M-35 grade complete all as specified and as directed
S&F in repairs PVC wall panelling plastic section for wall panelling of 6 mm thick fixed to wall with 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing to wall to make PVC frame as per manufacturer's instructions complete all as specified and directed.
Taking down carefully the old U/S Aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, pendants, sockets, regulators, light fitting etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete.
M&L for following point wiring complete with multi stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & inluding suitable size of concealed rigid PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 Sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and directed.
One light /fan/Bell point/security light controlled by one way switch
One 3 pin socket outlet 5 amps on same board
One 3 pin socket outlet 5 Amps point independent board
M&L for point wiring for one for 3 pin socket outlet, 15 Amps on independent board complete with multi stranded copper conductor 2.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & inluding suitable size of concealed rigid PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 2.5 Sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and directed.
M&L for point wiring for AC point on independent board complete with multi stranded copper conductor 4.0 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & inluding suitable size of concealed rigid PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 4.0 Sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified and directed. Notes for Srl item No. 157.00 to 159.00:- 1. The Rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. 2. At roof slab where there is burnt/blockage in the existing conduit wiring will be done through new PVC surface rigid conduit and rate are inclusive in above quoted item.
S&F Switch modular type, 1Module, 6 Amps one way complete all as specified and directed. Make :- Model Crabtree of Havells /Model Unica of Schneider / Model Marius of Legrand
S&F Socket outlet modular type 2M, 3 pin, 6 Amp one way complete all as specified and directed. Make :- Model Crabtree of Havells /Model Unica of Schneider / Model Marius of Legrand
S&F 20 Amps MCB modular type 1 module along with 20 Amps Socket 2 Module complete all as specified and directed. Make :- Model Crabtree of Havells /Model Unica of Schneider / Model Marius of Legrand
S&F Switch modular type 1M, 16 Amp complete all as specified and directed. Make :- Model Crabtree of Havells /Model Unica of Schneider / Model Marius of Legrand
S&F Socket outlet modular type 2M, 3 pin, 16 Amp complete all as specified and directed. Make :- Model Crabtree of Havells /Model Unica of Schneider / Model Marius of Legrand
S&F LED 36W LED 1'x4' light recess mounted with LED luminaires fixed in CRCA sheet metal with flexible wire suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.
S&F recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symmetrical illumination fixed in CRCA sheet metal suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.
S&F of Wall mounted LED Integrated Batten 10 Watt-2 Ft White, indoor decorative PVC extruded LED batten -integrated type complete all as specified and directed by Engr-in-Charge Make- Bajaj Cat Part No-BCLSB10 WH / Crompton Cat Part No-LCTLN-10-CDL / Havells Cat Part No-ENDURALINEARNEOBS10WLED865SPCWH.
S&F wall fan 300mm sweep with economy range high speed having full copper motor & high quality plastic (acrylic) blades for higher air delivery, powder coating provides longer life complete with accessories 230 Volts including necessary electric connection of suitable PVC copper wire from ceiling rose or switch board to wall fan complete all as specified & directed. Make : Havells of Model No : Airboll Hi-Speed Wall Fan or equivalent make of Philips/Bajaj/Almonard
M&L for opening of hole through out the wall as suitable for exhaust fan of size 300 mm sweep and fixing of nut-bolts with anchor fastener of suitable size and making good the disturbed surface and all as per site requirement complete all as specified and directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster for fixing of exhaust fan and MS fastener, clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.
Taking down old exhaust fan and depositing to MES store yard complete all as specified and directed.
S&F steel body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and directed.
S&F PVC ceiling rose surfaces minimum size 65x50mm with two/ three terminals complete all as specified and directed.
Supply & fixing water storage heater 25 litre capacity, 5 Star rated , vertical type, AC, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, plug top, safety valve, non Return Valve, temperature indicator and including electric and water connection with suitable nut, bolts & washers and making good to disturbed surface complete all as specified and directed.
S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 liters capacity of geyser as hot and cold water connection complete all as specified and directed.
S&F in replacement of sheet metal enclosure V TPN 4 way for MCCB 125 A, 4P incomer, double door DB, IP-54, bus bar, neutral link , earth bar and din rail complete all as specified and directed.
S&F in replacement MCCB 125 Amps, 4 pole, 415 Volts with 16KA including electrical connection with appropriate size of aluminium lugs and insulation packing complete all as specified and directed.
S&F in replacement of MCB DB SPN 12 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed.
S&F in replacement of MCB DB SPN 8 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed.
S&F in replacement of MCB DB SPN 4 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed.
M&L in replacement MCB SPN 'C' curve 40 to 63 Amps 240 Volts , 10 KA complete all as specified and directed.
S&F in replacement MCB TPN 63 Amps 415 volts, 'B' Series 10 KA complete all as specified and directed.
S&F for replacement MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and directed.
S&F for replacement MCB SP 'C' curve 40 Amps 240 Volts complete all as specified and directed.
S&F in replacement of LED Building security light fitting 40 Watt including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc. and all as directed. Make – Crompton Cat Part No-LSTS-40-CDL-M / C Crompton cat part No-LSTS-40-CDL-M /Bajaj Cat Part No – BCLST30W LED
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in electric plate No. 3 and connected to earth test point including testing complete all as specified and directed. Note:- Cost of GI earthing lead & protection pipe up to 7.5 Mtr is included in quoted rates.
M & L for 4mm dia galvanised iron earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate situation for loop earthing etc. complete all as specified and directed.
S&F submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 1.5 Sqmm in 2 runs and 1.5 Sqmm one run for earth drawn in & inluding suitable size of concealed rigid PVC conduit complete all as specified and directed. (For UPS wiring)
S&F submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 2.5 Sqmm in 2 runs and 2.5 Sqmm one run for earth drawn in & inluding suitable size of concealed rigid PVC conduit complete all as specified and directed. (For UPS wiring)
M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated unsheathed FRLS cable multistranded copper conductor 1100 volts grade IS-694 marked drawn in & including 25 mm dia concealed rigid PVC conduit including taking down old submain wiring complete all as specified and directed. Notes for Srl item No 187.00 to 189.00 (a) Two runs of main cable , one run of earth cable and conduit all together shall be considered as one unit. (b) Cost of making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area shall be deemed to be included in quoted rate.
M&L for cable XLPE insulated screened PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor sizes 16 Sqmm, 4 core fixed on walls with & including suitable size of metallic saddles including taking down old cable complete all as specified and directed .
J S CONSTRUCTION CO
JYOTI ENTERPRISES
BEHAL TRADERS
YP INFRA
M/S Chhavi Constructions Co
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .