Loading
Loading…
Loading…
| # | Schedule | Awarded To | Bids | Value |
|---|---|---|---|---|
| 1 | Schedule 1 | DHIRAJLAL MORARJI | 1 | ₹42,888 |
| 2 | Schedule 2 | DHIRAJLAL MORARJI | 1 | ₹1.8 L |
| 3 | Schedule 3 | DHIRAJLAL MORARJI | 1 | ₹50,520 |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
20 Mar 2025, 9:00 amClosed
Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) as per IS 6455 (Q3) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) as per IS 6455 Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/5986355 Dated : 27-02-2025 Bid Document 1/21 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes Details of the Competent Authority approval for PAC Competent Authority Approval document for PAC : View Document Name of Competent Authority Ajay Kumar Designation of Competent Authority SME (M) Office/Department/Division of Competent Authority NPCIL 5&6 CA Approval Number 81754 Competent Authority Approval Date 2025-02-20 00:00:00 Brief Description of the Approval Granted by Competent Authority ITEM IS OF PROPRIETARY NATURE NATURE AND NO ONE ELSE CAN SUPPLY HENCE pac IS APPROVED BY CA 1. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order
2012 dated 23.03.2012 issued by Ministry of Micro
Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference
the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers 2/21 offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services
the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted
while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy
such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order
2012 and Public Procurement (Preference to Make in India) Order
2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 2. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over
Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. Evaluation Method ( Item Wise Evaluation Method ) Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule. The details of item-consignee combination covered under each schedule are as under: Evaluation Schedules Item/Category Quantit y Schedule 1 Single Row Deep Groove Ball Bearing (without Flange Outer Ring) As Per Is 6455 2 Schedule 2 Single Row Deep Groove Ball Bearing (without Flange Outer Ring) As Per Is 6455 12 Schedule 3 Single Row Deep Groove Ball Bearing (without Flange Outer Ring) As Per Is 6455 4 Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 2 pieces ) ( Under PAC ) Make skf Model 6318c3skf Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Generic Bearing Type Single Row Deep Groove Ball Bearing Flange Outer Ring Without 3/21 Bearing bore diameter
d (In mm) 3
4
5
8
9
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
150
160
170
180
190
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
530
560
600
630
670
710
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1500
6
7 (millimeter) Designation of Bearing 623
618/4
619/4
624
634
618/5
619/5
625
635
618/6
619/6
626
618/7
619/7
607
627
618/8
619/8
608
618/9
619/9
609
629
61800
61900
6000
6200
6300
61801
6001
6201
6301
61802
16002
6002
6202
6302
61803
16003
6003
6203
6303
6403
61804
16004
6004
6204
6304
6404
61805
16005
6005
6205
6305
6405
61806
16006
6006
6206
6306
6406
61807
16007
6007
6207
6307
6407
61808
16008
6008
6208
6308
6408
61809
16009
6009
6209
6309
6409
61810
16010
6010
6210
6310
6410
61811
16011
6011
6211
6311
6411
61812
16012
6012
6212
6312
6412
61813
16013
6013
6213
6313
6413
61814
16014
6014
6214
6314
6414
61815
16015
6015
6215
6315
6415
61816
16016
6016
6216
6316
6416
61817
16017
6017
6217
6317
6417
61818
16018
6018
6218
6318
6418
61819
16019
6019
6219
6319
61820
16020
6020
6220
6320
61821
16021
6021
6221
6321
61822
16022
6022
6222
6322
61824
16024
6024
6224
6324
61826
16026
6026
6226
6326
61828
16028
6028
6228
6328
61830
16030
6030
6230
6330
61832
16032
6032
6232
6332
61834
16034
6034
6234
6334
61836
16036
6036
6236
6336
61838
16038
6038
6238
6338
61840
16040
6040
6240
61844
16044
6044
6244
61848
16048
6048
8248
61852
16052
6052
6252
61856
16056
6056
6256
61860
16060
6060
6260
61864
16064
6064
6264
61868
16068
6068
61872
16072
6072
61876
16076
6076
61880
6080
61884
6084
61888
6088
61892
6092
61896
6096
618/500
60/500
618/530
618/560
618/600
618/630
618/670
618/710
618/750
618/800
618/850
618/900
618/950
618/1000
618/1060
618/1120
618/1180
618/1250
618/1320
618/1400
618/1500
623-Z
623-2Z
623-RS
623-2RS
638/4-Z
638/4-2Z
619/4-Z
619/4-2Z
624-Z
624-2Z
634-Z
634-2Z
634-RS
634-2RS
638/5-Z
638/5-2Z
619/5- Z
619/5-2Z
625-Z
625-2Z
635-Z
635-2Z
635-RS
635-2RS
628/6-Z
628/6-2Z
619/6-Z
619/6-2Z
626- Z
626-2Z
626-RS
626-2RS
628/7-Z
628/7-2Z
619/7-Z
619/7-2Z
607-Z
607-2Z
607-RS
607-2RS
627-Z
627-2Z
627-RS
627-2RS
638/8-Z
638/8-2Z
619/8-Z
619/8-2Z
608-Z
608-2Z
608-RS
608-2RS
638/9-Z
638/9-2Z
619/9-Z
619/9-2Z
609-Z
609-2Z
609-RS
609-2RS
629-Z
629-2Z
629-RS
629-2RS
61800-Z
61800-2Z
61800-RS
61800-2RS
63800-Z
63800-2Z
61900-Z
61900-2Z
6000-Z
6000-2Z
6000-RS
6000-2RS
6200-Z
6200-2Z
6200-RS
6200-2RS
6200-N
6200-NR
6300-Z
6300-2Z
6300- RS
6300-2RS
61801-Z
61801-2Z
61801-RS
61801- 2RS
6001-Z
6001-2Z
6001-RS
6001-2RS
6201-Z
Specification Specification Name Bid Requirement (Allowed Values) 4/21 6201-2Z
6201-RS
6201-2RS
6201-N
6201-NR
6301-Z
6301-2Z
6301-RS
6301-2RS
6301-N
6301- NR
61802-Z
61802-2Z
61802-RS
61802-2RS
16002-Z
16002-2Z
16002-RS
16002-2RS
6002-Z
6002-2Z
6002-RS
6002-2RS
6202-Z
6202-2Z
6202-RS
6202-2RS
6202-N
6202-NR
6302-Z
6302- 2Z
6302-RS
6302-2RS
6302-N
6302-NR
61803-Z
61803-2Z
61803-RS
61803-2RS
16003-Z
16003-2Z
16003-RS
16003-2RS
6003-Z
6003-2Z
6003-RS
6003-2RS
6003-N
6003-NR
6203-Z
6203-2Z
6203- RS
6203-2RS
6203-N
6203-NR
6303-Z
6303-2Z
6303-RS
6303-2RS
6303-N
6303-NR
6403-Z
6403- 2Z
6403-RS
6403-2RS
61804-RS
61804-2RS
16004-Z
16004-2Z
16004-RS
16004-2RS
6004-Z
6004-2Z
6004-RS
6004-2RS
6004-N
6004-NR
6204-Z
6204-2Z
6204-RS
6204-2RS
6204-N
6204- NR
6304-Z
6304-2Z
6304-RS
6304-2RS
6304-N
6304-NR
6404-Z
6404-2Z
6404-RS
6404-2RS
61805-RS
61805-2RS
16005-Z
16005-2Z
16005-RS
16005-2RS
6005-Z
6005-2Z
6005-RS
6005-2RS
6005-N
6005-NR
6205-Z
6205-2Z
6205-RS
6205- 2RS
6205-N
6205-NR
6305-Z
6305-2Z
6305-RS
6305-2RS
6305-N
6305-NR
6405-2Z
6405-RS
6405-2RS
61806-RS
61806-2RS
16006-Z
16006-2Z
16006-RS
16006-2RS
6006-Z
6006-2Z
6006-RS
6006-2RS
6006-N
6006-NR
6206-Z
6206-2Z
6206- RS
6206-2RS
6206-N
6206-NR
6306-Z
6306-2Z
6306-RS
6306-2RS
6306-N
6306-NR
6406-Z
6406- 2Z
6406-RS
6406-2RS
61807-RS
61807-2RS
16007-Z
16007-2Z
16007-RS
16007-2RS
6007-Z
6007-2Z
6007-RS
6007-2RS
6007-N
6007-NR
6207-Z
6207-2Z
6207-RS
6207-2RS
6207-N
6207- NR
6307-Z
6307-2Z
6307-RS
6307-2RS
6307-N
6307-NR
6407-Z
6407-2Z
6407-RS
6407-2RS
6407-N
6407-NR
61808-RS
61808-2RS
16008-Z
16008-2Z
16008-RS
16008-2RS
6008-Z
6008-2Z
6008-RS
6008-2RS
6008-N
6008-NR
6208-Z
6208- 2Z
6208-RS
6208-2RS
6208-N
6208-NR
6308-Z
6308-2Z
6308-RS
6308-2RS
6308-N
6308-NR
6408-Z
6408-2Z
6408-RS
6408-2RS
6408-N
6408- NR
61809-RS
61809-2RS
16009-Z
16009-2Z
16009-RS
16009-2RS
6009-Z
6009-2Z
6009-RS
6009-2RS
6009-N
6009-NR
6209-Z
6209-2Z
6209- RS
6209-2RS
6209-N
6209-NR
6309-Z
6309-2Z
6309-RS
6309-2RS
6309-N
6309-NR
6409-N
6409- NR
61810-RS
61810-2RS
16010-Z
16010-2Z
16010-RS
16010-2RS
6010-Z
6010-2Z
6010-RS
6010-2RS
6010-N
6010-NR
6210-Z
6210-2Z
6210- RS
6210-2RS
6210-N
6210-NR
6310-Z
6310-2Z
6310-RS
6310-2RS
6310-N
6310-NR
6410-N
6410- NR
61811-RS
61811-2RS
16011-Z
16011-2Z
16011-RS
16011-2RS
6011-Z
6011-2Z
6011-RS
6011-2RS
6011-N
6011-NR
6211-Z
6211-2Z
6211- RS
6211-2RS
6211-N
6211-NR
6311-Z
6311-2Z
6311-RS
6311-2RS
6311-N
6311-NR
6411-N
6411- NR
61812-RS
61812-2RS
16012-Z
16012-2Z
16012-RS
16012-2RS
6012-Z
6012-2Z
6012-RS
6012-2RS
6012-N
6012-NR
6212-Z
6212-2Z
6212- RS
6212-2RS
6212-N
6212-NR
6312-Z
6312-2Z
6312-RS
6312-2RS
6312-N
6312-NR
6412-N
6412- NR
61813-RS
61813-2RS
6013-Z
6013-2Z
6013- RS
6013-2RS
6013-N
6013-NR
6213-Z
6213-2Z
6213-RS
6213-2RS
6213-N
6213-NR
6313-Z
6313- 2Z
6313-RS
6313-2RS
6313-N
6313-NR
6413-N
Specification Specification Name Bid Requirement (Allowed Values) 5/21 6413-NR
61814-RS
61814-2RS
6014-Z
6014-2Z
6014-RS
6014-2RS
6014-N
6014-NR
6214-Z
6214- 2Z
6214-RS
6214-2RS
6214-N
6214-NR
6314-Z
6314-2Z
6314-RS
6314-2RS
6314-N
6314-NR
61815-RS
61815-2RS
6015-Z
6015-2Z
6015-RS
6015-2RS
6015-N
6015-NR
6215-Z
6215-2Z
6215- RS
6215-2RS
6215-N
6215-NR
6315-Z
6315-2Z
6315-RS
6315-2RS
6315-N
6315-NR
61816-RS
61816-2RS
6016-Z
6016-2Z
6016-RS
6016-2RS
6016-N
6016-NR
6216-Z
6216-2Z
6216-RS
6216- 2RS
6216-N
6216-NR
6316-Z
6316-2Z
6316-RS
6316-2RS
6316-N
6316-NR
61817-RS
61817-2RS
6017-Z
6017-2Z
6017-RS
6017-2RS
6017-N
6017- NR
6217-Z
6217-2Z
6217-RS
6217-2RS
6217-N
6217-NR
6317-Z
6317-2Z
6317-RS
6317-2RS
6317-N
6317-NR
61818-RS
61818-2RS
6018-Z
6018-2Z
6018-RS
6018-2RS
6018-N
6018-NR
6218-Z
6218-2Z
6218-RS
6218-2RS
6218-N
6218- NR
6318-Z
6318-2Z
6318-RS
6318-2RS
6318-N
6318-NR
61819-RS
61819-2RS
6019-Z
6019-2Z
6019-RS
6019-2RS
6019-N
6019-NR
6219-Z
6219- 2Z
6219-RS
6219-2RS
6219-N
6219-NR
6319-Z
6319-2Z
6319-RS
6319-2RS
6319-N
6319-NR
61820-RS
61820-2RS
6020-Z
6020-2Z
6020-RS
6020-2RS
6020-N
6020-NR
6220-Z
6220-2Z
6220- RS
6220-2RS
6220-N
6220-NR
6320-Z
6320-2Z
61821-RS
61821-2RS
6021-Z
6021-2Z
6021-RS
6021-2RS
6021-N
6021-NR
6221-Z
6221-2Z
6221- RS
6221-2RS
6221-N
6221-NR
6321-Z
6321-2Z
61822-RS
61822-2RS
6022-Z
6022-2Z
6022-RS
6022-2RS
6022-N
6022-NR
6222-Z
6222-2Z
6222- N
6222-NR
6322-Z
6322-2Z
61824-RS
61824-2RS
6024-Z
6024-2Z
6024-RS
6024-2RS
6024-N
6024- NR
6224-Z
6224-2Z
61826-RS
61826-2RS
6026-Z
6026-2Z
6026-RS
6026-2RS
6026-N
6026-NR
6226-Z
6226-2Z
61828-RS
61828-2RS
6028-Z
6028-2Z
6028-RS
6028-2RS
6030-Z
6030-2Z
6030-RS
6030-2RS
6032-Z
6032-2Z
6032-RS
6032-2RS
6405-Z Bearing outside diameter
D As per Table 1 Clause 4.2.1 of IS 6455 Bearing width
B As per Table 1 Clause 4.2.1 of IS 6455 Smallest permissible chamfer dimension
r1s
r2s As per Table 1 Clause 4.2.1 of IS 6455 Cage Material Press Steel
Brass
Polyamide
N.A. Certification
Testing & Warranty Conformity to Indian Standard As per IS 6455 Warranty for complete unit 1
2
3 Or higher (year) Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 2 pieces ) 6/21 Specification Parameter Name Bid Requirement (Allowed Values) Bearing Description and Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987 NU317 (85*180*41) Bearing Model NO NU 317 ECJ/C3 Make SKF * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303
Contracts & Material Management
NPCIL
Rawatbhata Rajasthan Site
Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002
242048 Which is about 60 Kms. away from Kota. 2 180 Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 12 pieces ) ( Under PAC ) Make skf Model 6317mc3skf Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Generic Bearing Type Single Row Deep Groove Ball Bearing Flange Outer Ring Without Bearing bore diameter
d (In mm) 3
4
5
8
9
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
150
160
170
180
190
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
530
560
600
630
670
710
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1500
6
7 (millimeter) Designation of Bearing 623
618/4
619/4
624
634
618/5
619/5
625
635
618/6
619/6
626
618/7
619/7
607
627
618/8
619/8
608
618/9
619/9
609
629
61800
61900
6000
6200
6300
61801
6001
6201
6301
61802
7/21 16002
6002
6202
6302
61803
16003
6003
6203
6303
6403
61804
16004
6004
6204
6304
6404
61805
16005
6005
6205
6305
6405
61806
16006
6006
6206
6306
6406
61807
16007
6007
6207
6307
6407
61808
16008
6008
6208
6308
6408
61809
16009
6009
6209
6309
6409
61810
16010
6010
6210
6310
6410
61811
16011
6011
6211
6311
6411
61812
16012
6012
6212
6312
6412
61813
16013
6013
6213
6313
6413
61814
16014
6014
6214
6314
6414
61815
16015
6015
6215
6315
6415
61816
16016
6016
6216
6316
6416
61817
16017
6017
6217
6317
6417
61818
16018
6018
6218
6318
6418
61819
16019
6019
6219
6319
61820
16020
6020
6220
6320
61821
16021
6021
6221
6321
61822
16022
6022
6222
6322
61824
16024
6024
6224
6324
61826
16026
6026
6226
6326
61828
16028
6028
6228
6328
61830
16030
6030
6230
6330
61832
16032
6032
6232
6332
61834
16034
6034
6234
6334
61836
16036
6036
6236
6336
61838
16038
6038
6238
6338
61840
16040
6040
6240
61844
16044
6044
6244
61848
16048
6048
8248
61852
16052
6052
6252
61856
16056
6056
6256
61860
16060
6060
6260
61864
16064
6064
6264
61868
16068
6068
61872
16072
6072
61876
16076
6076
61880
6080
61884
6084
61888
6088
61892
6092
61896
6096
618/500
60/500
618/530
618/560
618/600
618/630
618/670
618/710
618/750
618/800
618/850
618/900
618/950
618/1000
618/1060
618/1120
618/1180
618/1250
618/1320
618/1400
618/1500
623-Z
623-2Z
623-RS
623-2RS
638/4-Z
638/4-2Z
619/4-Z
619/4-2Z
624-Z
624-2Z
634-Z
634-2Z
634-RS
634-2RS
638/5-Z
638/5-2Z
619/5- Z
619/5-2Z
625-Z
625-2Z
635-Z
635-2Z
635-RS
635-2RS
628/6-Z
628/6-2Z
619/6-Z
619/6-2Z
626- Z
626-2Z
626-RS
626-2RS
628/7-Z
628/7-2Z
619/7-Z
619/7-2Z
607-Z
607-2Z
607-RS
607-2RS
627-Z
627-2Z
627-RS
627-2RS
638/8-Z
638/8-2Z
619/8-Z
619/8-2Z
608-Z
608-2Z
608-RS
608-2RS
638/9-Z
638/9-2Z
619/9-Z
619/9-2Z
609-Z
609-2Z
609-RS
609-2RS
629-Z
629-2Z
629-RS
629-2RS
61800-Z
61800-2Z
61800-RS
61800-2RS
63800-Z
63800-2Z
61900-Z
61900-2Z
6000-Z
6000-2Z
6000-RS
6000-2RS
6200-Z
6200-2Z
6200-RS
6200-2RS
6200-N
6200-NR
6300-Z
6300-2Z
6300- RS
6300-2RS
61801-Z
61801-2Z
61801-RS
61801- 2RS
6001-Z
6001-2Z
6001-RS
6001-2RS
6201-Z
6201-2Z
6201-RS
6201-2RS
6201-N
6201-NR
6301-Z
6301-2Z
6301-RS
6301-2RS
6301-N
6301- NR
61802-Z
61802-2Z
61802-RS
61802-2RS
16002-Z
16002-2Z
16002-RS
16002-2RS
6002-Z
6002-2Z
6002-RS
6002-2RS
6202-Z
6202-2Z
6202-RS
6202-2RS
6202-N
6202-NR
6302-Z
6302- 2Z
6302-RS
6302-2RS
6302-N
6302-NR
61803-Z
61803-2Z
61803-RS
61803-2RS
16003-Z
16003-2Z
16003-RS
16003-2RS
6003-Z
6003-2Z
6003-RS
6003-2RS
6003-N
6003-NR
6203-Z
6203-2Z
6203- RS
6203-2RS
6203-N
6203-NR
6303-Z
6303-2Z
6303-RS
6303-2RS
6303-N
6303-NR
6403-Z
6403- 2Z
6403-RS
6403-2RS
61804-RS
61804-2RS
16004-Z
16004-2Z
16004-RS
16004-2RS
6004-Z
6004-2Z
6004-RS
6004-2RS
6004-N
6004-NR
6204-Z
6204-2Z
6204-RS
6204-2RS
6204-N
6204- Specification Specification Name Bid Requirement (Allowed Values) 8/21 NR
6304-Z
6304-2Z
6304-RS
6304-2RS
6304-N
6304-NR
6404-Z
6404-2Z
6404-RS
6404-2RS
61805-RS
61805-2RS
16005-Z
16005-2Z
16005-RS
16005-2RS
6005-Z
6005-2Z
6005-RS
6005-2RS
6005-N
6005-NR
6205-Z
6205-2Z
6205-RS
6205- 2RS
6205-N
6205-NR
6305-Z
6305-2Z
6305-RS
6305-2RS
6305-N
6305-NR
6405-2Z
6405-RS
6405-2RS
61806-RS
61806-2RS
16006-Z
16006-2Z
16006-RS
16006-2RS
6006-Z
6006-2Z
6006-RS
6006-2RS
6006-N
6006-NR
6206-Z
6206-2Z
6206- RS
6206-2RS
6206-N
6206-NR
6306-Z
6306-2Z
6306-RS
6306-2RS
6306-N
6306-NR
6406-Z
6406- 2Z
6406-RS
6406-2RS
61807-RS
61807-2RS
16007-Z
16007-2Z
16007-RS
16007-2RS
6007-Z
6007-2Z
6007-RS
6007-2RS
6007-N
6007-NR
6207-Z
6207-2Z
6207-RS
6207-2RS
6207-N
6207- NR
6307-Z
6307-2Z
6307-RS
6307-2RS
6307-N
6307-NR
6407-Z
6407-2Z
6407-RS
6407-2RS
6407-N
6407-NR
61808-RS
61808-2RS
16008-Z
16008-2Z
16008-RS
16008-2RS
6008-Z
6008-2Z
6008-RS
6008-2RS
6008-N
6008-NR
6208-Z
6208- 2Z
6208-RS
6208-2RS
6208-N
6208-NR
6308-Z
6308-2Z
6308-RS
6308-2RS
6308-N
6308-NR
6408-Z
6408-2Z
6408-RS
6408-2RS
6408-N
6408- NR
61809-RS
61809-2RS
16009-Z
16009-2Z
16009-RS
16009-2RS
6009-Z
6009-2Z
6009-RS
6009-2RS
6009-N
6009-NR
6209-Z
6209-2Z
6209- RS
6209-2RS
6209-N
6209-NR
6309-Z
6309-2Z
6309-RS
6309-2RS
6309-N
6309-NR
6409-N
6409- NR
61810-RS
61810-2RS
16010-Z
16010-2Z
16010-RS
16010-2RS
6010-Z
6010-2Z
6010-RS
6010-2RS
6010-N
6010-NR
6210-Z
6210-2Z
6210- RS
6210-2RS
6210-N
6210-NR
6310-Z
6310-2Z
6310-RS
6310-2RS
6310-N
6310-NR
6410-N
6410- NR
61811-RS
61811-2RS
16011-Z
16011-2Z
16011-RS
16011-2RS
6011-Z
6011-2Z
6011-RS
6011-2RS
6011-N
6011-NR
6211-Z
6211-2Z
6211- RS
6211-2RS
6211-N
6211-NR
6311-Z
6311-2Z
6311-RS
6311-2RS
6311-N
6311-NR
6411-N
6411- NR
61812-RS
61812-2RS
16012-Z
16012-2Z
16012-RS
16012-2RS
6012-Z
6012-2Z
6012-RS
6012-2RS
6012-N
6012-NR
6212-Z
6212-2Z
6212- RS
6212-2RS
6212-N
6212-NR
6312-Z
6312-2Z
6312-RS
6312-2RS
6312-N
6312-NR
6412-N
6412- NR
61813-RS
61813-2RS
6013-Z
6013-2Z
6013- RS
6013-2RS
6013-N
6013-NR
6213-Z
6213-2Z
6213-RS
6213-2RS
6213-N
6213-NR
6313-Z
6313- 2Z
6313-RS
6313-2RS
6313-N
6313-NR
6413-N
6413-NR
61814-RS
61814-2RS
6014-Z
6014-2Z
6014-RS
6014-2RS
6014-N
6014-NR
6214-Z
6214- 2Z
6214-RS
6214-2RS
6214-N
6214-NR
6314-Z
6314-2Z
6314-RS
6314-2RS
6314-N
6314-NR
61815-RS
61815-2RS
6015-Z
6015-2Z
6015-RS
6015-2RS
6015-N
6015-NR
6215-Z
6215-2Z
6215- RS
6215-2RS
6215-N
6215-NR
6315-Z
6315-2Z
6315-RS
6315-2RS
6315-N
6315-NR
61816-RS
61816-2RS
6016-Z
6016-2Z
6016-RS
6016-2RS
6016-N
6016-NR
6216-Z
6216-2Z
6216-RS
6216- 2RS
6216-N
6216-NR
6316-Z
6316-2Z
6316-RS
6316-2RS
6316-N
6316-NR
61817-RS
61817-2RS
6017-Z
6017-2Z
6017-RS
6017-2RS
6017-N
6017- NR
6217-Z
6217-2Z
6217-RS
6217-2RS
6217-N
6217-NR
6317-Z
6317-2Z
6317-RS
6317-2RS
6317-N
6317-NR
61818-RS
61818-2RS
6018-Z
Specification Specification Name Bid Requirement (Allowed Values) 9/21 6018-2Z
6018-RS
6018-2RS
6018-N
6018-NR
6218-Z
6218-2Z
6218-RS
6218-2RS
6218-N
6218- NR
6318-Z
6318-2Z
6318-RS
6318-2RS
6318-N
6318-NR
61819-RS
61819-2RS
6019-Z
6019-2Z
6019-RS
6019-2RS
6019-N
6019-NR
6219-Z
6219- 2Z
6219-RS
6219-2RS
6219-N
6219-NR
6319-Z
6319-2Z
6319-RS
6319-2RS
6319-N
6319-NR
61820-RS
61820-2RS
6020-Z
6020-2Z
6020-RS
6020-2RS
6020-N
6020-NR
6220-Z
6220-2Z
6220- RS
6220-2RS
6220-N
6220-NR
6320-Z
6320-2Z
61821-RS
61821-2RS
6021-Z
6021-2Z
6021-RS
6021-2RS
6021-N
6021-NR
6221-Z
6221-2Z
6221- RS
6221-2RS
6221-N
6221-NR
6321-Z
6321-2Z
61822-RS
61822-2RS
6022-Z
6022-2Z
6022-RS
6022-2RS
6022-N
6022-NR
6222-Z
6222-2Z
6222- N
6222-NR
6322-Z
6322-2Z
61824-RS
61824-2RS
6024-Z
6024-2Z
6024-RS
6024-2RS
6024-N
6024- NR
6224-Z
6224-2Z
61826-RS
61826-2RS
6026-Z
6026-2Z
6026-RS
6026-2RS
6026-N
6026-NR
6226-Z
6226-2Z
61828-RS
61828-2RS
6028-Z
6028-2Z
6028-RS
6028-2RS
6030-Z
6030-2Z
6030-RS
6030-2RS
6032-Z
6032-2Z
6032-RS
6032-2RS
6405-Z Bearing outside diameter
D As per Table 1 Clause 4.2.1 of IS 6455 Bearing width
B As per Table 1 Clause 4.2.1 of IS 6455 Smallest permissible chamfer dimension
r1s
r2s As per Table 1 Clause 4.2.1 of IS 6455 Cage Material Press Steel
Brass
Polyamide
N.A. Certification
Testing & Warranty Conformity to Indian Standard As per IS 6455 Warranty for complete unit 1
2
3 Or higher (year) Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 12 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) Bearing Description and Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987 22217 EK (85*150*36) Bearing Model No 22217 EK Make SKF * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity 10/21 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303
Contracts & Material Management
NPCIL
Rawatbhata Rajasthan Site
Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002
242048 Which is about 60 Kms. away from Kota. 12 180 Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 4 pieces ) ( Under PAC ) Make skf Model 3213askf Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Generic Bearing Type Single Row Deep Groove Ball Bearing Flange Outer Ring Without Bearing bore diameter
d (In mm) 3
4
5
8
9
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
150
160
170
180
190
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
530
560
600
630
670
710
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1500
6
7 (millimeter) Designation of Bearing 623
618/4
619/4
624
634
618/5
619/5
625
635
618/6
619/6
626
618/7
619/7
607
627
618/8
619/8
608
618/9
619/9
609
629
61800
61900
6000
6200
6300
61801
6001
6201
6301
61802
16002
6002
6202
6302
61803
16003
6003
6203
6303
6403
61804
16004
6004
6204
6304
6404
61805
16005
6005
6205
6305
6405
61806
16006
6006
6206
6306
6406
61807
16007
6007
6207
6307
6407
61808
16008
6008
6208
6308
6408
61809
16009
6009
6209
6309
6409
61810
16010
6010
6210
6310
6410
61811
16011
6011
6211
6311
6411
61812
16012
6012
6212
6312
6412
61813
16013
6013
6213
6313
6413
61814
16014
6014
6214
6314
6414
61815
16015
6015
6215
6315
6415
61816
16016
6016
6216
6316
6416
61817
16017
6017
6217
6317
6417
61818
16018
6018
6218
6318
6418
61819
16019
6019
6219
6319
61820
16020
6020
6220
6320
61821
16021
6021
6221
6321
61822
16022
6022
6222
6322
61824
16024
6024
6224
6324
61826
16026
6026
6226
6326
61828
16028
6028
6228
6328
61830
16030
6030
6230
6330
61832
11/21 16032
6032
6232
6332
61834
16034
6034
6234
6334
61836
16036
6036
6236
6336
61838
16038
6038
6238
6338
61840
16040
6040
6240
61844
16044
6044
6244
61848
16048
6048
8248
61852
16052
6052
6252
61856
16056
6056
6256
61860
16060
6060
6260
61864
16064
6064
6264
61868
16068
6068
61872
16072
6072
61876
16076
6076
61880
6080
61884
6084
61888
6088
61892
6092
61896
6096
618/500
60/500
618/530
618/560
618/600
618/630
618/670
618/710
618/750
618/800
618/850
618/900
618/950
618/1000
618/1060
618/1120
618/1180
618/1250
618/1320
618/1400
618/1500
623-Z
623-2Z
623-RS
623-2RS
638/4-Z
638/4-2Z
619/4-Z
619/4-2Z
624-Z
624-2Z
634-Z
634-2Z
634-RS
634-2RS
638/5-Z
638/5-2Z
619/5- Z
619/5-2Z
625-Z
625-2Z
635-Z
635-2Z
635-RS
635-2RS
628/6-Z
628/6-2Z
619/6-Z
619/6-2Z
626- Z
626-2Z
626-RS
626-2RS
628/7-Z
628/7-2Z
619/7-Z
619/7-2Z
607-Z
607-2Z
607-RS
607-2RS
627-Z
627-2Z
627-RS
627-2RS
638/8-Z
638/8-2Z
619/8-Z
619/8-2Z
608-Z
608-2Z
608-RS
608-2RS
638/9-Z
638/9-2Z
619/9-Z
619/9-2Z
609-Z
609-2Z
609-RS
609-2RS
629-Z
629-2Z
629-RS
629-2RS
61800-Z
61800-2Z
61800-RS
61800-2RS
63800-Z
63800-2Z
61900-Z
61900-2Z
6000-Z
6000-2Z
6000-RS
6000-2RS
6200-Z
6200-2Z
6200-RS
6200-2RS
6200-N
6200-NR
6300-Z
6300-2Z
6300- RS
6300-2RS
61801-Z
61801-2Z
61801-RS
61801- 2RS
6001-Z
6001-2Z
6001-RS
6001-2RS
6201-Z
6201-2Z
6201-RS
6201-2RS
6201-N
6201-NR
6301-Z
6301-2Z
6301-RS
6301-2RS
6301-N
6301- NR
61802-Z
61802-2Z
61802-RS
61802-2RS
16002-Z
16002-2Z
16002-RS
16002-2RS
6002-Z
6002-2Z
6002-RS
6002-2RS
6202-Z
6202-2Z
6202-RS
6202-2RS
6202-N
6202-NR
6302-Z
6302- 2Z
6302-RS
6302-2RS
6302-N
6302-NR
61803-Z
61803-2Z
61803-RS
61803-2RS
16003-Z
16003-2Z
16003-RS
16003-2RS
6003-Z
6003-2Z
6003-RS
6003-2RS
6003-N
6003-NR
6203-Z
6203-2Z
6203- RS
6203-2RS
6203-N
6203-NR
6303-Z
6303-2Z
6303-RS
6303-2RS
6303-N
6303-NR
6403-Z
6403- 2Z
6403-RS
6403-2RS
61804-RS
61804-2RS
16004-Z
16004-2Z
16004-RS
16004-2RS
6004-Z
6004-2Z
6004-RS
6004-2RS
6004-N
6004-NR
6204-Z
6204-2Z
6204-RS
6204-2RS
6204-N
6204- NR
6304-Z
6304-2Z
6304-RS
6304-2RS
6304-N
6304-NR
6404-Z
6404-2Z
6404-RS
6404-2RS
61805-RS
61805-2RS
16005-Z
16005-2Z
16005-RS
16005-2RS
6005-Z
6005-2Z
6005-RS
6005-2RS
6005-N
6005-NR
6205-Z
6205-2Z
6205-RS
6205- 2RS
6205-N
6205-NR
6305-Z
6305-2Z
6305-RS
6305-2RS
6305-N
6305-NR
6405-2Z
6405-RS
6405-2RS
61806-RS
61806-2RS
16006-Z
16006-2Z
16006-RS
16006-2RS
6006-Z
6006-2Z
6006-RS
6006-2RS
6006-N
6006-NR
6206-Z
6206-2Z
6206- RS
6206-2RS
6206-N
6206-NR
6306-Z
6306-2Z
6306-RS
6306-2RS
6306-N
6306-NR
6406-Z
6406- 2Z
6406-RS
6406-2RS
61807-RS
61807-2RS
16007-Z
16007-2Z
16007-RS
16007-2RS
6007-Z
6007-2Z
6007-RS
6007-2RS
6007-N
6007-NR
6207-Z
6207-2Z
6207-RS
6207-2RS
6207-N
6207- NR
6307-Z
6307-2Z
6307-RS
6307-2RS
6307-N
6307-NR
6407-Z
6407-2Z
6407-RS
6407-2RS
Specification Specification Name Bid Requirement (Allowed Values) 12/21 6407-N
6407-NR
61808-RS
61808-2RS
16008-Z
16008-2Z
16008-RS
16008-2RS
6008-Z
6008-2Z
6008-RS
6008-2RS
6008-N
6008-NR
6208-Z
6208- 2Z
6208-RS
6208-2RS
6208-N
6208-NR
6308-Z
6308-2Z
6308-RS
6308-2RS
6308-N
6308-NR
6408-Z
6408-2Z
6408-RS
6408-2RS
6408-N
6408- NR
61809-RS
61809-2RS
16009-Z
16009-2Z
16009-RS
16009-2RS
6009-Z
6009-2Z
6009-RS
6009-2RS
6009-N
6009-NR
6209-Z
6209-2Z
6209- RS
6209-2RS
6209-N
6209-NR
6309-Z
6309-2Z
6309-RS
6309-2RS
6309-N
6309-NR
6409-N
6409- NR
61810-RS
61810-2RS
16010-Z
16010-2Z
16010-RS
16010-2RS
6010-Z
6010-2Z
6010-RS
6010-2RS
6010-N
6010-NR
6210-Z
6210-2Z
6210- RS
6210-2RS
6210-N
6210-NR
6310-Z
6310-2Z
6310-RS
6310-2RS
6310-N
6310-NR
6410-N
6410- NR
61811-RS
61811-2RS
16011-Z
16011-2Z
16011-RS
16011-2RS
6011-Z
6011-2Z
6011-RS
6011-2RS
6011-N
6011-NR
6211-Z
6211-2Z
6211- RS
6211-2RS
6211-N
6211-NR
6311-Z
6311-2Z
6311-RS
6311-2RS
6311-N
6311-NR
6411-N
6411- NR
61812-RS
61812-2RS
16012-Z
16012-2Z
16012-RS
16012-2RS
6012-Z
6012-2Z
6012-RS
6012-2RS
6012-N
6012-NR
6212-Z
6212-2Z
6212- RS
6212-2RS
6212-N
6212-NR
6312-Z
6312-2Z
6312-RS
6312-2RS
6312-N
6312-NR
6412-N
6412- NR
61813-RS
61813-2RS
6013-Z
6013-2Z
6013- RS
6013-2RS
6013-N
6013-NR
6213-Z
6213-2Z
6213-RS
6213-2RS
6213-N
6213-NR
6313-Z
6313- 2Z
6313-RS
6313-2RS
6313-N
6313-NR
6413-N
6413-NR
61814-RS
61814-2RS
6014-Z
6014-2Z
6014-RS
6014-2RS
6014-N
6014-NR
6214-Z
6214- 2Z
6214-RS
6214-2RS
6214-N
6214-NR
6314-Z
6314-2Z
6314-RS
6314-2RS
6314-N
6314-NR
61815-RS
61815-2RS
6015-Z
6015-2Z
6015-RS
6015-2RS
6015-N
6015-NR
6215-Z
6215-2Z
6215- RS
6215-2RS
6215-N
6215-NR
6315-Z
6315-2Z
6315-RS
6315-2RS
6315-N
6315-NR
61816-RS
61816-2RS
6016-Z
6016-2Z
6016-RS
6016-2RS
6016-N
6016-NR
6216-Z
6216-2Z
6216-RS
6216- 2RS
6216-N
6216-NR
6316-Z
6316-2Z
6316-RS
6316-2RS
6316-N
6316-NR
61817-RS
61817-2RS
6017-Z
6017-2Z
6017-RS
6017-2RS
6017-N
6017- NR
6217-Z
6217-2Z
6217-RS
6217-2RS
6217-N
6217-NR
6317-Z
6317-2Z
6317-RS
6317-2RS
6317-N
6317-NR
61818-RS
61818-2RS
6018-Z
6018-2Z
6018-RS
6018-2RS
6018-N
6018-NR
6218-Z
6218-2Z
6218-RS
6218-2RS
6218-N
6218- NR
6318-Z
6318-2Z
6318-RS
6318-2RS
6318-N
6318-NR
61819-RS
61819-2RS
6019-Z
6019-2Z
6019-RS
6019-2RS
6019-N
6019-NR
6219-Z
6219- 2Z
6219-RS
6219-2RS
6219-N
6219-NR
6319-Z
6319-2Z
6319-RS
6319-2RS
6319-N
6319-NR
61820-RS
61820-2RS
6020-Z
6020-2Z
6020-RS
6020-2RS
6020-N
6020-NR
6220-Z
6220-2Z
6220- RS
6220-2RS
6220-N
6220-NR
6320-Z
6320-2Z
61821-RS
61821-2RS
6021-Z
6021-2Z
6021-RS
6021-2RS
6021-N
6021-NR
6221-Z
6221-2Z
6221- RS
6221-2RS
6221-N
6221-NR
6321-Z
6321-2Z
61822-RS
61822-2RS
6022-Z
6022-2Z
6022-RS
6022-2RS
6022-N
6022-NR
6222-Z
6222-2Z
6222- N
6222-NR
6322-Z
6322-2Z
61824-RS
61824-2RS
6024-Z
6024-2Z
6024-RS
6024-2RS
6024-N
6024- NR
6224-Z
6224-2Z
61826-RS
61826-2RS
6026-Z
Specification Specification Name Bid Requirement (Allowed Values) 13/21 6026-2Z
6026-RS
6026-2RS
6026-N
6026-NR
6226-Z
6226-2Z
61828-RS
61828-2RS
6028-Z
6028-2Z
6028-RS
6028-2RS
6030-Z
6030-2Z
6030-RS
6030-2RS
6032-Z
6032-2Z
6032-RS
6032-2RS
6405-Z Bearing outside diameter
D As per Table 1 Clause 4.2.1 of IS 6455 Bearing width
B As per Table 1 Clause 4.2.1 of IS 6455 Smallest permissible chamfer dimension
r1s
r2s As per Table 1 Clause 4.2.1 of IS 6455 Cage Material Press Steel
Brass
Polyamide
N.A. Certification
Testing & Warranty Conformity to Indian Standard As per IS 6455 Warranty for complete unit 1
2
3 Or higher (year) Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) As Per IS 6455 ( 4 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) Model No 3310 A Make SKF Type of ball Bearing Angular contact * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303
Contracts & Material Management
NPCIL
Rawatbhata Rajasthan Site
Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002
242048 Which is about 60 Kms. away from Kota. 4 180 Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to 14/21 increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days)
subject to minimum of 30 days. If the original delivery period is less than 30 days
the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses Liquidated Damages Liquidated Damages as stipulated under Clause No.15 (iii) of GeM GTC shall not be applicable for the contract awarded against this Bid. Additional Specification Parameters
if any 1) Additional Specification Parameters as stipulated in the Bid Document must be complied by th e Bidder/Seller and supply may be made accordingly otherwise material will be liable for rejection . 2) compliance to additional parameter may be submitted by bidder for evaluation of Bid. Clarifications/documents submitted by the bidder Documents not submitted along with the bid and clarifications sought during the evaluation stage
but now being submitted during representation shall not be considered
for evaluation. MSE Benefits Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order
2012 dated 23.03.2012 issued by Ministry of Micro
Small and Me dium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. Trades ar e excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. Releva nt documentary evidence in this regard shall be uploaded along with the bid. If L-1 is not an MSE and MSE Seller(s) has/have quoted price within L-1+15% of margin of purchase preference/price band defined in relevant policy
such Seller shall be given opportunity to match L-1 price and con tract will be awarded for defined percentage in bid document of total QUANTITY. Benefits of Publi c Procurement Policy shall be given to all eligible MSEs as stated under Point no.3 of FAQ dt. 25/0 3/2022
irrespective of product categories and the category they are registered under viz. Manufa cturing or Service. Documents related to Payment The seller shall submit Original invoice clearly marked for ‘Bill to’ and ‘Shipped to’
Annexure-F (c opy enclosed) (Additional Doc 1)
Seller’s Bank details
E-invoice if applicable to seller based on hi s turnover
Test certificate (if applicable) etc to the Paying Authority directly
immediately after di spatching material to the Consignee. As payment is to be released in a time bound manner
non-r eceipt of these document in time may lead to rejection of supplies.” Note : Following documents shall be submitted by the bidder(s) along with the bid: - 1) Bidder is mandatorily required to submit an Undertaking as per attached Annexure-D on Comp any’s Letter Head along with offer
failing which
their offer will not be evaluated and rejected wit hout asking any further clarification with regard to the same. (Additional Doc 2) 2) 'Specifications Compliance Sheet' to be filled by the bidder
if asked in the tender. BANNING OF BUSINESS DEALINGS BY NPCIL/BUYER NPCIL reserves the right to initiate Banning as per NPCIL’s Banning of business dealings as mentioned belo w and are independent of actions under GeM’s IM (Incident Management) Policy. 15/21 The words banning
blacklisting
de-registered
debarred
holiday
suspension of business etc.
means the s ame. The words NPCIL
Corporation
Buyer etc.
means the same. The words Contractor
Bidder
Seller
Service Provider etc.
means the same. 1 . Grounds for Banning The business dealing with the Contractor/Bidder/Seller/Service Provider shall be liable for banning
on acco unt of the reasons attributable to them
which shall include
but not limited to the following: 1.1.1. Involvement in cartel formation during bidding. 1.1.2. Baseless allegations by the bidder on NPCIL/Corporation/Buyer evaluation processes or officials. 1.1.3. If any of the owner
proprietor or partner of the Contractor
is convicted by a court of law
during bid ding process or currency of the contract
for offences involving corrupt and fraudulent practices including misrepresentation of the facts
moral turpitude in relation to its business dealings with NPCIL. 1.1.4. Malafide/unlawful acts/malpractices or improper conduct on part of Contractor based on the appr oved findings of the Investigation Agency. 1.1.5. If the Contractor misuses the premises or facilities of the NPCIL forcefully occupies
tampers or dam ages the Company’s properties etc. or fails to vacate the properties/land/complex within reasonable time li mit as specified or even after receiving the notices from the department. 1.1.6. Security concerns for the assets of the Corporation and State. 1.1.7. Submission of bids that contain false information or falsified documents or the concealment of such i nformation in the bids in order to influence the outcome of eligibility screening or/at any other stage of th e public bidding and execution. 1.1.8. Withdrawal of a bid or refusal to accept an award of contract with the NPCIL without justifiable cause
after being adjudged as the successful bidder. 1.1.9. Supply of Counterfeit items Breach of Code of Integrity. 1.1.10. Bidder shall not act in contravention of the codes which includes 1.1.10.1 Prohibition of a. Making offer
solicitation or acceptance of bribe
reward or gift or any material benefit
either directly or indirectly
in exchange for an unfair advantage in the procurement process or to otherwise influence the p rocurement process. b. Any omission or misrepresentation that may mislead or attempt to mislead so that financial or other be nefit may be obtained or an obligation avoided. c. Any conclusion
bid rigging or anticompetitive behavior that may impair the transparency
fairness and t he progress of the procurement process. d. Improper use of information provided by the procuring entity to the bidder with an intent to gain unfair advantage in the procurement process or for personal gain. e. Any financial or business transactions between the bidder and any official of the procuring entity related to tender or execution process of contract; which can affect the decision of the procuring entity directly or i ndirectly. f. Any coercion or any threat to impair or harm
directly or indirectly
any party or its property to influence the procurement process. g. Obstruction of any investigation or auditing of a procurement process. h. Making false declaration or providing false information for participation in tender process or to secure a contract; 1.1.10.2 Disclosure of conflict of interest 1.1.10.3 Disclosure by the bidder of any previous transgression made in respect of the provisions of above 1.1.10.1 with any entity in any country during the last three years or of being debarred/banned by any ot her procuring entity. 16/21 1.2 Show Cause Notice 1.2.1 NPCIL will issue Show Cause Notice to the Contractor on noticing/receipt of a complaint of any irregul arities and/or misconduct and/or unethical practice as mentioned in clause no. 1.1. 1.2.2 Upon receipt of Show cause notice
the Contractor is required to submit the reply to Show Cause Noti ce within 30 days of its receipt and no extension shall be given without justifiable reasons. TheContractor s hall also be given an opportunity for oral hearing to present the case in person to NPCIL and the date of Or al Hearing will be indicated in the Show Cause Notice. Only the regular employees of Contractor will be per mitted to represent the Contractor during the Oral hearing
and nooutsider shall be allowed to represent th e Contractor on their behalf. 1.3 Period of Banning The period of banning shall be for a period of not exceeding 2 (two) years and not less than 6 (six) months as considered appropriate by NPCIL. 1.4 Effect of Banning of Business Dealings by NPCIL In case NPCIL has banned the business dealing with the bidder/contractor
the following shall be the conse quences on issuance of the order of banning of business dealings with the bidder/contractor: 1.4.1 No Contract of any kind whatsoever shall be placed to such banned firms including its allied firmsafter the issue of Banning Order by NPCIL. The Contractor including their allied firms shall not be allo wed to participate in any tender enquiry till completion of Banning period. If the Contractor has already pa rticipated in tender process and the price bids are not opened
his techno-commercial bid will be rejected and price bid will be kept unopened. In cases
where the price bids of Contractor have been opened prior t o the order of banning
such bids shall be rejected. However
incase such banned Contractor is Lowest (L1)
next lowest firm shall be considered as L1. Bid Security
if any
submitted by such banned Contractors sh all be returned to the bidder. 1.4.2 Contractors shall not be permitted to participate in any business process in any form or entity i.e.
as an Associate/Collaborator/Joint Venture Partner/Consortium Partner of the Main Contractor even if the bann ing order is passed subsequent to opening of Part-I bids. 1.4.3 Contractor shall not be allowed to participate as Sub-Vendor/sub-contractor in the tenders for contra cts for works
service
supplies. 1.4.4 Even if
the banned Contractor is an approved Sub-vendor under any Contract for such equipment/co mponent/service
the Main Contractor shall not be permitted to place Work order/Purchase order/Service C ontract on the banned Contractor as a sub-vendor after the date of banning even though the name of the p arty has been approved as a sub-vendor prior to the order of banning. 1.4.5 The completion certificate issued to the contractor shall make a mention regarding banning duringex ecution of the contract. 1.4.6 Banned bidders shall not be permitted to submit their bid. The bid submitted by the banned bidder s hall be summarily rejected. 1.4.7 Contracts concluded before the issue of the banning order shall
not be affected by the banning order . 1.4.8 Banning shall automatically be extended to all Allied firms of the Contractor. In case of Joint venture Consortium is banned all partners will also stand debarred for the period specified in the Banning Order. T he names of all partners should be clearly specified in the “Banning order”. 1.4.9 Banning in any manner does not impact any other contractual or other legal rights of NPCIL. 1.4.10 Banning under the provisions of Banning of Business Dealings of NPCIL is applicable only for NPCIL. 1.5 Definition of Allied Firm: 17/21 Allied Firm means all concerns which come within the sphere of effective influence of the banned firm. In determining this
the following factors shall be taken into consideration: a). Whether the management is common; b). Majority interest in the management is held by the partners or directors of banned/suspended firm; c). Substantial or majority shares are owned by the banned/suspended firm and by virtue of this it has a c ontrolling voice; d). Directly or indirectly controls
or is controlled by or is under common control with another bidder; f). All successor firms will also be considered allied firms. END USE CETIFICATE/VERIFICATION In case applicable
Bidder shall ensure that items to be imported to India do not have US origin component s above the de minims level. End use verification shall not be agreed by NPCIL in case of imports under an y circumstances. Further
the bidder/contractor shall make attempts to import raw materials/component s
if necessary
without insisting for “End User Certificate”. DELIVERY SCHEDULE Date of delivery of the Stores stipulated in the Contract
shall be the essence of the Contract and delivery of Stores must be completed by the dates specified therein. Unless otherwise agreed
the Contract shall c ome into force from the date of issue of priced Purchase Order (Effective Date) and accordingly contractual delivery period shall be reckoned from that date for the purpose of fixing Contractual Delivery Date (CDD). RIGHT OF RECOURSE UNDER CIVIL LIABILITY FOR NUCLEAR DAMAGES ACT 2010 & RULE2011 T HEREOF Since
Requirement is for PHWR
NPCIL is the system designer and technology owner
being responsible for safety design of such installations in this tender
NPCIL shall assume the role of supplier in accordance wit h the explanation of the term “supplier” given in Rule 24 of the CLND Rules
2011 and in the context of sec tion 17(a) and (b) of the CLND Act
2010. PRICE BREAK-UP A . In case of two part tenders
the Bidder shall take special care not to mix up any price details require d to be submitted against Part-II (Price bid) with Part-I (Technical & Commercial bid except price) an d vice versa. Any violation of the above shall lead to summarily rejection of bid as being non-respon sive. B . Wherever asked for
the bidder shall be required to submit complete break-up of “Total Price” as pe r prescribed “Price Bid Break-up/SOQR” format in GeM Portal. In such case
the non-submission of th e “Price Bid Break-up/SOQR” or submission of irrelevant document or submission of No/Nil value aga inst all items of the “Price Bid Break-up/SOQR” shall lead to rejection of such bids. However
in case No/Nil rate is quoted against some of the item(s)
the price of such item(s) shall be deemed to be ze ro. C . Addition/deletion/modification of any item in the prescribed “Price Bid Break-up/SOQR” format is not acceptable unless authorized by Buyer and accordingly
bids with any unauthorized addition/deletio n/modification in the prescribed “Price Bid Break-up/SOQR” format shall be summarily rejected. D . Calculations for Price Bid Evaluation for Single Packet/Part Bids
Part-II (price bid) evaluation for Two 18/21 Packet/Part Bids and Contract Order Placement: 1 . For Price Bid Evaluation as per price evaluation criteria as well as for award of contract
“Total Price” quoted by Bidder in GeM Portal shall only be considered. The same “Total Price” shall only be consi dered for other purposes (i.e.
negotiation
price matching in case of MSE/MII purchase preference/B id splitting
Financial score in case of QCBS tenders
Reverse Auction (RA) etc).However
the “Price B id Break-up/SOQR” submitted in GeM Portal or “Price Bid Break-up/SOQR” arrived at as per calculati ons mentioned in below clauses
as the case may be
will only be used as price breakup for the purp ose of interim/running bill payments. 2 . The “Total Price” quoted should match with the total of price of all items of the “Price Bid Break-up/S OQR”. 3 . For arriving at the item-wise amount as well as at the total of all items of the “Price Bid Break-up/SO QR”
the quantity multiplied by the quoted rates shall govern and if required
other figures will stan d corrected accordingly. 4 . In case of mismatch between “Total Price” quoted by Bidder in GeM Portal and total of price of all it ems of the “Price Bid Break-up/SOQR”
the “Total Price” quoted by Bidder in GeM Portal only shall b e considered. The prices of all the items of the “Price Bid Break-up/SOQR” mentioned by the Bidder i n the submitted document in GeM Portal
will stand adjusted accordingly in proportion to the weight ed average of itemwise amount. 5 . Bidder get option to submit Revised “Price Bid Break-up/SOQR” during Negotiation or Reverse Aucti on (RA). While submitting the Revised “Price Bid Break-up/SOQR”
the Bidder should not increase pr ice of any item(s) from the originally submitted (i.e.
uploaded at time of Bid submission) “Price Bid Break-up/SOQR”. Incase
during negotiation price is increased for any item(s) by the bidder
the sam e shall not be accepted and will be dealt as stipulated in point above. 6 . In case of price matching scenario during MSE/MII Purchase Preference/
7563545
GEM/2025/B/5986355
Two Packet Bid
Single Row Deep Groove Ball Bearing (Without Flange Outer
180 days
Rajasthan; Chittorgarh
Item wise evaluation
PRODUCT
3 documents required · 3 mandatory
| Item | Delivery Location | Qty | Delivery |
|---|---|---|---|
| Single Row Deep Groove Ball Bearing (Without Flange Outer | - | 18 | - |
Exempted
24 Apr 2025
27 Feb 2025
20 Mar 2025
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7563545.pdf
GEM_BID
1740215062.pdf
OTHER
Belowfive_b2a9c154-7a20-40c2-91131740215339678_rrsuser465.doc
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .