PROVN OF PARKING SHED IN TECH AREA UNDER GE (AF) TECH AREA

Amount

M&L Point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded(ERW) stove enameled Steel conduit, surface mounted ISI marked as per IS:9557 (Part I) 1980 including HFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad etc complete all as directed by Engr-in-charge. (The quoted rate shall be deemed to be included that average length of wiring for one point is 25.00 RM)

Supply and fixing LED light fitting 1x40 Watt flame proof, CIMFR certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.MAKE CROMPTON- FWL1315-40-CDL/Sudhir/Baliga

S & F flame proof weather rotary switch with cable terminal box in cat aluminum alloy ( LM-6) construction, epoxy powder coated, single pole 16 Amp On/OFF type, 230 V AC certified by CMRS for Group IIA & IIB complete including compression glands all as specified and directed.

S&F for sub main wiring with PVC cable insulated and sheathed 2x10 sqmm and 1x10 sqmm single core FRLS cable standard copper conductor 1100 volt grade be used as continuous earth wire connected to earth dolly and incl steel conduit of stove enarmelled of size 20mm dia with all accessories complete incl making good to disturbed surface all as specified and directed.

S&F FLP - WP Switch and socket and Plug combined IN LM6 40Amp 440 volts 4P+Earth complete all as specified and as directed.

S&F MCB TPN DB,4 way Vertical type,440V,3 phase with rated busbar 250 Amps, double door type suitable for MCCB as a incomer and MCBs as out going ,IP 54-IK 09 with metal double door type with all fixing arrangement as M/s angle iron of suitable size to maint the VTPN required at ground etc complete all as specified.

S&F MCB SP 6-32 Amps, 240V 'C' Series 10 KA.

S & F MCB FP 63 Amp 415 Volts 'C' series 10 KA.

M&L for earthing complete with galvanised steel plate electrode of size 600mmx600mmx6 mm thick buried directly in ground (earth pit not less than 3.00 Mtr deep below from ground level with top edge of the plate not less than 2.75 Mtrs below from ground level connected to glavanised iron strip of size 32 X 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to earthing test point incl excavation and earth work and disposal of surplus soil to a distance as directed incl 40 mm GI tubing light grade and necessary fitting for protection of galvanised strip incl laying of charcoal dust and common salt PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in earth pit with MS angle iron frame of of angle iron of size 40x40x6mm, 40mm thick RCC cover of RCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) reinforced with 6 mm dia round bar @ 75mm C/C both ways with 150mm size MS handle made out of 12mm dia MS bar, 15mm thick plastering with CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe medium grade for watering and suitable size of wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part-I (2009) and connected to earth test incl testing complete all as specified and directed. Note:- Earth lead GI strip 32x6mm and 40mm dia GI light grade protection pipe beyond 7.5m shall be measured and paid separately.

S&F of Air termination, single pointed copper rod 12mm dia and 300mm long.

S&F aluminum strip 25 x 3 mm with porcelain insulator and fixing screws etc. fixed on roof/wall and connecting to test point etc. all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled screwed including 3 Nos, 8mm dia, 25mm long hexagonal head screw complete all as specified and directed.

M&L for brazing/welding of earthing electrode complete all as specified and directed.

M&L 40mm bore GI tubing light grade with all fittings for earthing lead protection laid in under ground or fixed on wall complete all as specified and directed

S&F galvanised strip 32 x 6 mm with saddles/insulators and fixing screws etc. for roof conductors and down conductors above ground etc complete all as specified and directed.

M&L for MS framed indication board fabricated by using MS sheet of size 30 x 20cm & 2mm thick make to shape of square/round/triangle as per sample including 10mm dia MS bar (90 cm long), etc, necessary welding, earth works, for grouting rod in ground etc including two coats of synthetic enemal paint over a coat of red oxide primer and marking the word TESTED ON -------, RESULT -------------with different colour of synthetic emenal paint with suitable size of letters and all necessary arrangements including PCC (1:3:6) type C-1 (Using 20 mm graded stone aggregates) block of size 150x150x150mm for grouting the MS bars etc complete all as specifed and directed .

Excavation in trenches in soft/ loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line,and getting out complete all as specified and directed.

Returning & filling in soil including spreading, leveling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed.

Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover, laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.

M&L for local sand coushioning with dry and clean sand for over and under the cable for protection of cable , 80 mmt thick sand layer laid before laying the cable, 150 mm thick sand layer after laying the cable complete all as specified and directed. Note : Thickness of sand will be measured after punning for payment purpose.

Supply, laying, testing of cable XLPE insulated, screened, PVC bedded,galvanised steel strip or wire , armoured heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size-

16 sqmm 4 core

S & F MCCB 63 Amps, 16KA , 4 pole with complete accessories with sheet metal enclosure all as specified and directed.

Demolition/Dismantling of cement concrete of any description and in any position not otherwise specifically provided for by using diamond cutter all as specified and as directed by Engr-in-charge.

Excavating over areas, n exc 1.5 m deep and getting out soft / loose soil complete all as specified and directed.

Removing demolished/excavated material of concrete exc. 1.50 km but n exc 5.00 km and directed

M&L hardcore of borken stone or boulders of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface etc complete all as specified.

M&L 150mm thick Cement concrete (DLC) in PCC1 :4: 8 type D2 with 7 days compressive streanth as 10 N/Sq mm as in sub base etc complete all as specified and directed.

M&L Polythene film, 400 micron thick laid on a tack coat of bitumen @ 2.5 Kg / 10 Sq cm with VG 10. etc complete all as specified and directed.

M&L cement concrete work in pavement/hard-standing with minimum flexural strength 45 kg/per square centimetre in field using non circular synthetic fiber @ 0.25% by weight of cement (min cement content shall be 400 kg/Cum using OPC) etc complete all as specified and directed. Note :- Non circular synthetic fiber measured & paid seprately

Supply only polyester triangular fibres as secondary reinforcement in all types of concrete and mortars

M & L for finishing the surfaces of concrete roads, pavements, by brooming etc complete all as directed and specified.

M&L for Forming construction joint for 330 mm thick slab , 28 mm deep and 10 mm wide (using diamond cutter) providing polythene backup rod 12 mm dia and sealed with polyurethane sealent(Min depth of sealent 12 mm) complying with BS 5212,BS4254,and EN41875-2003,priming the sides min MAF± 30% with ten years performance guarantee and applying marking tape on edge of joint to prevent accidental spillage of sealent on top surface to give neat finish to sealent and removing the masking tap after sealent is applied by mechanial means all as specified and as directed

M&LCement concrete in foundations, filling and mass-concrete with type C-2 (1:3:6) mix using 40 mm graded stone aggregate etc complete all as specified and directed.

M&L RCC M-25 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified..

M&L RCC M-25 (using 20mm graded aggregate) in Columns, pillars, piers, posts and struts etc complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as directed and specified.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, and binding including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed and specified.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface etc complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work; for rough finished surface of concrete etc complete all as directed and specified.

Removing excavated material exc. 1.5 km but nexc 5 km and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified.

M & L for roof trusses (framed), vertical posts, purlins, gussest plate and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats and fabrication etc complete all as specified and directed. Note :- Fabrication of members to be done at site as per directeion of Engr-in-charge.

M & L for preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint etc complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, wll flushing fixed with self tapping screws etc complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete as specified.

S & F mild steel works as in wind ties for roof including securing bolts, posts and including struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, including flat iron fillets (for securing wire mesh etc) and for valley gutters etc including all neccessary drilling, bolting or riveting etc and similar works confirming to Fe-410 or Fe-310 upto any height of building complete all as specified and directed

S&F HT Bolts (machine made) 20 to 25 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 1.0 Mtr length but nexc 1.5 Mtr length complete all as specified and directed

Sethi Brothers

Abhi Construction

GUPTA ENGINEERING WORKS

deva engineers